Most of the photo voltaic (PV) arrays often work in harsh outdoor environment, and undergo various faults, such as local material aging, shading, open circuit, short circuit and so on. The generation of these faults w...Most of the photo voltaic (PV) arrays often work in harsh outdoor environment, and undergo various faults, such as local material aging, shading, open circuit, short circuit and so on. The generation of these faults will reduce the power generation efficiency, and when a fault occurs in a PV model, the PV model and the systems connected to it are also damaged. In this paper, an on-line distributed monitoring system based on XBee wireless sensors network is designed to monitor the output current, voltage and irradiation of each PV module, and the temperature and the irradiation of the environment. A simulation PV module model is established, based on which some common faults are simulated and fault training samples are obtained. Finally, a memetic algorithm optimized Back Propagation ANN fault diagnosis model is built and trained by the fault samples data. Experiment result shows that the system can detect the common faults of PV array with high accuracy.展开更多
Unregulated utilization of renewable generation including residential photovoltaic (PV) systems can have a significant impact on load characteristics in distribution networks. For improving PV generation capabilities,...Unregulated utilization of renewable generation including residential photovoltaic (PV) systems can have a significant impact on load characteristics in distribution networks. For improving PV generation capabilities, power quality aspects have to be coordinated with present load characteristics. This paper discusses the harmonic content of PV generation and the influence to power quality indicators in residential distribution networks. PV generation measurement results including current harmonic amplitude and phase angle values are presented. Results of different modelling scenarios are analysed and a simplified model of harmonics in PVs is offered. The results of the study showed a moderate additional harmonic distortion in residential load current and voltage distortion at the substation’s busbar when PVs were added. Novelty of the paper is that harmonic current values at higher orders are presented and analysed. The results pointed out in this paper could be further used for modelling the actual harmonic loads of the PVs in distribution networks.展开更多
The high utilization level of renewable generation including residential photovoltaic (PV) systems together with the uncontrolled charging of electric vehicles (EVs) can have a significant impact on load characteristi...The high utilization level of renewable generation including residential photovoltaic (PV) systems together with the uncontrolled charging of electric vehicles (EVs) can have a significant impact on load characteristics in distribution networks. Harmonic content of PV generation, EV charging loads, and their influence on power quality indicators in residential distribution networks are discussed in this paper. For investigating likely power quality scenarios, PV generation and EV charging measurement results including current harmonic amplitude and phase angle values are used and compared with present load characteristics. Different modelling scenarios are analysed and a simplified model of harmonics in PVs and EVs is offered. The results of the study show moderate additional harmonic distortion in residential load current and voltage distortion at the substation’s busbar when PV generation and EV loading are added. The scenarios presented in this paper can be further used for modelling the actual harmonic loads of the PVs and EVs in distribution networks.展开更多
文摘Most of the photo voltaic (PV) arrays often work in harsh outdoor environment, and undergo various faults, such as local material aging, shading, open circuit, short circuit and so on. The generation of these faults will reduce the power generation efficiency, and when a fault occurs in a PV model, the PV model and the systems connected to it are also damaged. In this paper, an on-line distributed monitoring system based on XBee wireless sensors network is designed to monitor the output current, voltage and irradiation of each PV module, and the temperature and the irradiation of the environment. A simulation PV module model is established, based on which some common faults are simulated and fault training samples are obtained. Finally, a memetic algorithm optimized Back Propagation ANN fault diagnosis model is built and trained by the fault samples data. Experiment result shows that the system can detect the common faults of PV array with high accuracy.
文摘Unregulated utilization of renewable generation including residential photovoltaic (PV) systems can have a significant impact on load characteristics in distribution networks. For improving PV generation capabilities, power quality aspects have to be coordinated with present load characteristics. This paper discusses the harmonic content of PV generation and the influence to power quality indicators in residential distribution networks. PV generation measurement results including current harmonic amplitude and phase angle values are presented. Results of different modelling scenarios are analysed and a simplified model of harmonics in PVs is offered. The results of the study showed a moderate additional harmonic distortion in residential load current and voltage distortion at the substation’s busbar when PVs were added. Novelty of the paper is that harmonic current values at higher orders are presented and analysed. The results pointed out in this paper could be further used for modelling the actual harmonic loads of the PVs in distribution networks.
文摘The high utilization level of renewable generation including residential photovoltaic (PV) systems together with the uncontrolled charging of electric vehicles (EVs) can have a significant impact on load characteristics in distribution networks. Harmonic content of PV generation, EV charging loads, and their influence on power quality indicators in residential distribution networks are discussed in this paper. For investigating likely power quality scenarios, PV generation and EV charging measurement results including current harmonic amplitude and phase angle values are used and compared with present load characteristics. Different modelling scenarios are analysed and a simplified model of harmonics in PVs and EVs is offered. The results of the study show moderate additional harmonic distortion in residential load current and voltage distortion at the substation’s busbar when PV generation and EV loading are added. The scenarios presented in this paper can be further used for modelling the actual harmonic loads of the PVs and EVs in distribution networks.
