Surface modification of calcium carbonate:A review of theories,methods and applications

Calcium carbonate,which is widely employed as a filler added into the polymer matrix,has large numbers of applications owing to the excellent properties such as low cost,non-toxicity,high natural reserves and biocompatibility.Nevertheless,in order to obtain the good filling effect,calcium carbonate needs to be surface modified by organic molecules so as to enhance the dispersion and compatibility within the composites.This review paper systematically introduces the theory,methods,and applications progress of calcium carbonate with surface modification.Additionally,the key factors that affect the properties of the composites as well as the current difficulties and challenges are highlighted.The current research progress and potential application prospects of calcium carbonate in the fields of plastics,rubber,paper,medicine and environmental protection are discussed as well.Generally,this review can provide valuable reference for the modification and comprehensive utilization of calcium carbonate.

Plasma Surface Modification of Kevlar Fibers

Cold plasma techniques were used to treat the surface of Kevlar-49 fibers. The dynamic parameters of wetting, contact-angles and surface energy of the fiber before and alter the treatment were compared to see the changes in the wetting property. ESCA and electron spin resonance were utilized to examine the chemical composition and the attached free radicals of the fiber surface. The results, together with changes in the magnitude of the contact-angle and the number of free radicals with time after the plasma treatment do not show any ageing effect. Single filament test revealed that the tensile strength was not impaired but even improved somewhat after the plasma treatment. The experiment shows that the interlaminar shear strength of Kevlar fiber reinforced epoxy resin compo- site is increased for more than 60％% after the treatment.

Preparation of defect free ceramic/Ti composite membranes by surface modification and in situ oxidation

Al2O3 ceramic powder was applied to modify the large pores defects on the surface of the porous metal Ti support,in situ oxidation method was a convenient method to prepare defect free ceramic/Ti composite membranes on this basis.In situ oxidation conditions experimental results show that the best condition for preparing the TiO2-Al2O3/Ti composite membrane is under 800°C for 2 h,and the microstructure and pore sizes of the TiO2-Al2O3/Ti composite membranes are affected obviously.The thickness and composition of the TiO2/Ti composite membranes are determined by SEM and XRD completely.The pore size distribution of the composite membrane is measured by bubble pressure method,the most probable aperture is about 3.12μm,while the average pore size of defect free TiO2-Al2O3/Ti is about 3.23μm.After ultrasonic treatment,the slight weight change of membranes reveals no observable change,which indicates that TiO2-Al2O3/Ti composite membranes maintain a good stability.

Nonlinear magneto-mechanical-thermo coupling characteristic analysis for transport behaviors of carriers in composite multiferroic piezoelectric semiconductor nanoplates with surface effect

In this paper,to better reveal the surface effect and the screening effect as well as the nonlinear multi-field coupling characteristic of the multifunctional piezoelectric semiconductor(PS)nanodevice,and to further improve its working performance,a magneto-mechanical-thermo coupling theoretical model is theoretically established for the extensional analysis of a three-layered magneto-electro-semiconductor coupling laminated nanoplate with the surface effect.Next,by using the current theoretical model,some numerical analyses and discussion about the surface effect,the corresponding critical thickness of the nanoplate,and the distributions of the physical fields(including the electron concentration perturbation,the electric potential,the electric field,the average electric displacement,the effective polarization charge density,and the total charge density)under different initial state electron concentrations,as well as their active manipulation via some external magnetic field,pre-stress,and temperature stimuli,are performed.Utilizing the nonlinear multi-field coupling effect induced by inevitable external stimuli in the device operating environment,this paper not only provides theoretical support for understanding the size-dependent tuning/controlling of carrier transport as well as its screening effect,but also assists the design of a series of multiferroic PS nanodevices.

Pores Created by Laser Surface Modification of Poly(vinylalcohol)-Collagen with Glycosaminoglycan Scaffold for Cell Culture in Tissue Engineering

A PVA-GAG-COL composite scaffold is fabricated by polyvinyl alcohol （PVA）, glyeosaminoglycan （GAG） and collagen （COL）. Laser surface modification technology is used to make holes on the surface of the scaffolds. Inside and outside interconnection micro-porous structure is obtained. Bioeompatibility test of the scaffolds shows that PVA-GAG-COL scaffold can promote the adhesion and proliferation of the fibroblast. Also, fibroblast can grow normally on the scaffolds with pore diameter from 115 um to 255 um and pore distance from 500 um to 2000 um. PVA-GAG-COL scaffolds possess excellent cell biocompatibility. The porous structure is suitable for cell culture in tissue engineering.

Effect of Na3AlF6 Addition and Surface Modification of SiCp on the Microstructure and Mechanical Properties of SiCp/Al Composites

Al-matrix composites reinforced with 56.5 vol% SiC were prepared by powder metallurgy with different amounts of additives and surface modifications of SiCp. The crystalline phase, morphology, elements on the surface of SiCp and the interface between SiCp and Al were characterized by XRD, SEM, EDS and EPMA. The results show that it is favorable for the reaction between TiO2-C on the surface of SiCp and Al at the SiCp-Al interface at 1 050 ℃. Besides, the process of Na3 AlF6 melting, dissolving and then contacting with Al2 O3 formed the NaF-AlF3-Al2 O3 system, which generated OAlF2-, promoting the dessolution of Al2 O3 film on the surface of Al powder. Na3 AlF6 meets the needs of chemical reaction in TiO2-C-Al system at the SiCpAl interface in the way of offering more molten Al. After 0.75 wt% Na3 AlF6 was added into raw materials, the whole TiO2-C film and most SiO2 film were destroyed and the interfacial bonding between SiCp and Al was keeping good, in which no obvious void and crack were observed. Meanwhile, no brittle Al4 C3 phase formed in the system. At this time, the flexure strength and density of samples presented optimal values, reaching up to 106.5 MPa and 90.77% respectively.

Surface Modification of Nanometer TiO_2 and Effect of Preparing TiO_2/P(St-co-DVB) Composites by Dispersion Polymerization

Surface modification of nanometer titanium dioxide particles and effect of preparing TiO2/P （St-co-DVB） composites by dispersion polymerization are described. To introduce vinyl group onto the surface of titanium dioxide particles, the titanium dioxide particles were surface-modified with a silicane coupling agent, methacryloylpropyltrimethoxysilicane. Polymer encapsulation in the presence of either modified-titanium dioxide particles or unmodified-titanium dioxide particles was carried out by dispersion polymerization of styrene, divinylbenzene in ethanol medium with polyvinylpyrroliclone as stabilizer, and 2, 2＇-azobis（isobutyronitrile） as initiator. The modified-titanium dioxide was analyzed with Fourier-transform infrared spectroscopy（FTIR）, UV-Vis spectrophotometer, thermo-gravimetric analysis and transmission microscope. The polymer encapsulation of modified-titanium dioxide and unmodified-titanium dioxide particles was confirmed with FTIR and transmission electron microscope. Results show that compared with unmodified-titanium dioxide, modified-titanium dioxide is more suitable for preparing inorganic core/orclanic shell composites.

Photocatalytic remediation ofγ-hexachlorocyclohexane contaminated soils using TiO_2 and montmorillonite composite photocatalyst

TiO2 and montmorillonite composite photocatalysts were prepared and applied in degrading γ-hexachlorocyclohexane （γ-HCH） in soils. After being spiked with γ-HCH, soil samples loaded with the composite photocatalysts were exposed to UV-light irradiation. The results indicated that the photocatalytic activities of the composite photocatalysts varied with the content of TiO2 in the order of 10%〈70%〈50% 〈30%, Moreover, the photocatalytic activity of the composite photocatalysts with TiO2 content 30% was higher than that of the pure P25 with the same mass of TiO2. The strong adsorption capacity of the composite photocatalysts and quantum size effect may contribute to its increased photocatalytic activities. In addition, effect of dosage of composite photocatalysts and soil pH on γ-HCH photodegradation was investigated. Pentachlorocyclohexene, trichlorocyclohexene, and dichlorobenzene were detected as photodegradation intermediates, which were gradually degraded with the photodegradation evolution.

Surface-modified Ag@Ru-P25 for photocatalytic CO_(2) conversion with high selectivity over CH_(4) formation at the solid–gas interface

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar fuels.A surface-modified Ag@Ru-P25 photocatalyst with H_(2)O_(2) treatment was designed in this study to convert CO_(2) and H_(2)O vapor into highly selective CH4.Ru doping followed by Ag nanoparticles(NPs)cocatalyst deposition on P25(TiO_(2))enhances visible light absorption and charge separation,whereas H_(2)O_(2) treatment modifies the surface of the photocatalyst with hydroxyl(–OH)groups and promotes CO_(2) adsorption.High-resonance transmission electron microscopy,X-ray photoelectron spectroscopy,X-ray absorption near-edge structure,and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst,while thermogravimetric analysis,CO_(2) adsorption isotherm,and temperature programmed desorption study were performed to examine the significance of H_(2)O_(2) treatment in increasing CO_(2) reduction activity.The optimized Ag1.0@Ru1.0-P25 photocatalyst performed excellent CO_(2) reduction activity into CO,CH4,and C2H6 with a~95%selectivity of CH4,where the activity was~135 times higher than that of pristine TiO_(2)(P25).For the first time,this work explored the effect of H_(2)O_(2) treatment on the photocatalyst that dramatically increases CO_(2) reduction activity.

Research progress in friction stir processing of magnesium alloys and their metal matrix surface composites: Evolution in the 21^(st )century

Rising concerns about climate change drive the demand for lightweight components.Magnesium(Mg)alloys are highly valued for their low weight,making them increasingly important in various industries.Researchers focusing on enhancing the characteristics of Mg alloys and developing their Metal Matrix Composites(MMCs)have gained significant attention worldwide over the past decade,driven by the global shift towards lightweight materials.Friction Stir Processing(FSP)has emerged as a promising technique to enhance the properties of Mg alloys and produce Mg-MMCs.Initially,FSP adapted to refine grain size from the micro to the nano level and accelerated the development of MMCs due to its solid-state nature and the synergistic effects of microstructure refinement and reinforcement,improving strength,hardness,ductility,wear resistance,corrosion resistance,and fatigue strength.However,producing defect-free and sound FSPed Mg and Mg-MMCs requires addressing several variables and their interdependencies,which opens up a broad range of practical applications.Despite existing reviews on individual FSP of Mg,its alloys,and MMCs,an attempt has been made to analyze the latest research on these three aspects collectively to enhance the understanding,application,and effectiveness of FSP for Mg and its derivatives.This review article discusses the literature,classifies the importance of Mg alloys,provides a historical background,and explores developments and potential applications of FSPed Mg alloys.It focuses on novel fabrication methods,reinforcement strategies,machine and tool design parameters,material characterization,and integration with other methods for enhanced properties.The influence of process parameters and the emergence of defects are examined,along with specific applications in mono and hybrid composites and their microstructure evolution.The study identifies promising reinforcement materials and highlights research gaps in FSP for Mg alloys and MMCs production.It concludes with significant recommendations for further exploration,reflecting ongoing advancements in this field.

Effect of surface modification on thermal expansion of Zr_(2)WP_(2)O_(12)/aromatic polyimides based composites

Surface modification is a fascinating way to improve the compounding effect between inorganic fillers and polymers.In this study,zirconium tungsten phosphate(ZWP) with negative thermal expansion was surface modified by silane coupling agent 3-(Trimethoxysilyl)propyl methacrylate.The effects of surface modification and the modification mechanism were analyzed in detail by X-ray diffractometer,scanning electron microscopy,Fourier transform infrared spectroscopy and thermal mechanical analysis.The surface modification could effectively reduce the thermal expansion properties of the composite.When the added amount of 3-methacryloxypropyl trimethoxysilaneSilane(trade name:KH570) is 0.50 wt%,the thermal expansion coefficient of ZWP/Aromatic polyimide composite decreased by 9.76%.The surface modification also can effectively improve the dielectric performance of aromatic polyimides.The present work provides one new way to improve the thermal expansion behavior of composites.

Effect of surface modification of ammonium polyphosphate-diatomite composite filler on the flame retardancy and smoke suppression of cellulose paper

Ammonium polyphosphate-diatomite composite filler(APP-diatomite composite filler)was modified with silane coupling agent KH550 to improve the flame retardancy of filled paper.Cone calorimeter was used to analyze the heat and smoke releasing rates,as well as smoke toxicity of the filled paper.The distribution of the composite filler particles in paper and the morphology of the charred residues after combustion were investigated by scanning electron microscope(SEM),and the chemical structure of the charred residues was studied with fourier transform infrared spectroscopy(FTIR).Results show that the peak heat releasing rate(PHRR),total heat release(THR)and peak mass loss rate(PMLR)of the filled paper with the modified APP-diatomite decreased markedly,compared with those for the control paper,while the charred residue after combustion increased.In addition,the filled paper had an increased peak rate of smoke release(RSR)and increased total smoke release(TSR)and peak CO production rates,but a decreased peak CO_(2) production rate.It was also found that part of the carbon element in the charred residue of the paper loaded with the modified APP-diatomite was in the forms of C=C=C,C≡C and C≡N,and the charred residue had a relatively more intact structure without apparent fiber breakage and longitudinal cracks.

Recent Advances and Progress for the Fabrication and Surface Modification of AIE-active Organic-inorganic Luminescent Composites

Organic dyes based hybrid organic-inorganic luminescent nanomaterials with high quantum efficiency, good physical or chemical stability, and favorable biocompatibility, have attracted growing attention recently because of their important applications in the areas of biomedical imaging, chemical sensors, and light-emitting diodes(LEDs). Nevertheless, conventional fluorescence molecules suffer from aggregation-caused quenching(ACQ) when they are doped into inorganic nanomaterials. Aggregation-induced emission(AIE) is an abnormal and intriguing fluorescent phenomenon that has aroused increasing interest for various applications especially in biomedical fields. Compared with conventional organic dyes, the AIE-active molecules will emit more intense fluorescence in their aggregates or solid states. It provides an elegant route to overcome the drawbacks of conventional organic molecules. Over the past few decades, the fabrication and surface modification of various organic-inorganic luminescent composites doped with AIE-active molecules have been reported. Therefore, it is highly desirable to summarize these advances. In this review, recent advances and progress in constructing various AIEgens-doped organic-inorganic hybrid nanocomposites and their subsequent surface modification were summarized. We hope this review could further promote the research of AIE-active functional materials.

Improving the Interfacial Mechanical Property of Fiber Reinforced Cement with Dielectric Barrier Discharge 2: Morphological and Compositional Changes of the Fiber Surface

The morphological and compositional changes of the PP fibers pretreated with dielectric barrier discharge (DBD)are investigated with SEM, XPS and IR. The result shows that the etching effect is the main reason for the improvement of the result of pull-out test of the fibercement composite reported in a previous paper and the oxidation of the fiber surface also favors the adhesion between the fiber and the matrix.

The Studies on the Surface Organic Modification of Tourmaline Powder with Stearic Acid and Its Composite

Stearic acid modified tourmaline powder had been investigated to improve the compatibility and dispersed stability between tourmaline and polymer matrix. The experimental results indicated that the activation index was 100% and contact angle reached 120° when the ratio of the ore slurry is 5:50, the dosage of stearic acid and p-toluenesulfonic acid is 10% and 0.5% (of tourmaline powder’s quantity) respectively with reaction at 80°C for 6.0 h, and the modified tourmaline exhibited an excellent hydrophobic property. The introduction of stearic groups reduced the reunion of tourmaline particles clearly and improved the dispersivity in polymers, and the amount of negative ions released of modified tourmaline increased obviously for both modified tourmaline powders and its composite with polyamide-66 compared to the unmodified tourmaline. Moreover, the structure of modified tourmaline was also characterized by means of Fourier Transform infrared spectroscopy, X-ray diffraction, thermal gravimetric analysis, scanning electron microscope.

Preparation and characterization of different surface modified SiCp reinforced Al-matrix composites

The effects of SiCp surface modifications(Cu coating,Ni coating and Ni/Cu coating)on the microstructures and mechanical properties of Al matrix composites were investigated.Surface modification of SiC particles with Cu,Ni and Cu/Ni,respectively,was carried out by electroless plating method.SiCp/Al composites were prepared by hot pressed sintering followed by hot extrusion.The results show that the surface modification of SiC particles plays an effective role,which is relative to the type of surface coating,and the interfacial bonding become stronger in the following order:untreated SiCp<Ni(Cu)-coated SiCp<Ni/Cu-coated SiCp.The Ni/Cu-coated SiCp/Al composites exhibit the best comprehensive mechanical properties,with ultimate tensile strength(σUTS)and fracture strain(εf)of 389 MPa and 6.3%,respectively.Compared with that of untreated-SiCp/Al composites,theσUTS andεf are enhanced by 19.3%and 57.5%.

Surface-modified Biphasic Calcium Phosphate/Poly (L-lactide) Biocomposite

Biphasic calcium phosphate （BCP） powders were prepared by hydrolyzation proc-ess and surface-modified by directly grafted L-lactide （LLA） onto the surface of BCP through a chemical linkage. The grafting ratio of organic groups was 9 wt%. After surface modification, the surface of BCP powders was covered by the lamella-shaped crystal. Poly （L-lactide） was mixed with BCP to form the BCP/PLLA biocomposite. Modified BCP （mBCP） particles could be uniformly dis-persed in PLLA matrix. The compressive strength of the mBCP/PLLA composite is 115 MPa, 28% higher than that of unmodified-BCP/PLLA composite. The improved mechanical strength is attributed to the enhanced adhesion between the inorganic BCP filler and the organic PLLA matrix.

Effects of Fiber Surface Pretreatment and Composite Posttreatment on Mechanical Properties of 2D⁃Cf/Phosphate Geopolymer Matrix Composites

Geopolymers are an important class of materials with potential applications because of their heat resistance,flame resistance,environmental friendliness,and possibilities of being transformed into ceramic matrix composites at low cost.However,the low mechanical properties as well as the intrinsic brittleness limit their technological implementations,and it is necessary to enhance the mechanical properties of geopolymers by adopting various kinds of reinforcements.In this work,therefore,two⁃dimensional continuous carbon fiber(Cf)reinforced phosphate⁃based geopolymer composites(Cf/geopolymer)were prepared through ultrasonic⁃assisted impregnation method.Effects of acetone treatment and high⁃temperature treatment on the properties of Cf/geopolymer composites were studied by X⁃ray photoelectron spectroscopy(XPS),X⁃ray diffraction(XRD),and scanning electron microscopy(SEM).Results of the study proved that acetone treatment plays a key role in ameliorating the interfacial interaction between Cf and phosphate matrix,which can thus enhance the mechanical properties of Cf/geopolymer composites.The Cf/geopolymer composites prepared by acetone⁃treated Cf had a flexural strength of 156.1 MPa and an elastic modulus of 39.7 GPa in Y direction.Moreover,an additional Sol⁃SiO2 re⁃impregnation treatment could further enhance the mechanical properties of the acetone⁃treated Cf/geopolymer composites by repairing the cracks and filling the pores.The results in this paper not only provide insights into the surface modification of Cf,but also report a facile and low⁃cost preparation route for Cf/geopolymer composites with potential applications in aerospace and defense technology.

Wettability Control between Oleophobic/Superhydrophilic and Superoleophilic/Superhydrophobic Characteristics on the Modified Surface Treated with Fluoroalkyl End-Capped Oligomers/Micro-Sized Polystyrene Particle Composites

Fluoroalkyl end-capped vinyltrimethoxysilane-N,N-dimethylacrylamide cooligomer [RF-(CH2-CHSi(OMe)3)x-(CH2-CHC(=O)NMe2)y-RF;RF = CF(CF3)OC3F7: RF-(VM)x-(DMAA)y-RF] was synthesized by reaction of fluoroalkanoyl peroxide [RF-C(=O)O-O(O=)C-RF] with vinyltrimethoxysilane (VM) and N,N-dimethylacrylamide (DMAA). The modified glass surface treated with the cooligomeric nanoparticles [RF-(VM-SiO3/2)x-(DMAA)y-RF] prepared under the sol-gel reaction of the cooligomer under alkaline conditions was found to exhibit an oleophobic/superhydrophilic property, although the corresponding fluorinated homooligomeric nanoparticles [RF-(VM-SiO3/2)n-RF] afforded an oleophobic/hydrophobic property on the modified surface under similar conditions. RF-(VM-SiO3/2)n-RF/RF-(VM-SiO3/2)x-(DMAA)y-RF/PSt (micro-sized polystyrene particles) composites, which were prepared by the sol-gel reactions of the corresponding homooligomer and cooligomer in the presence of PSt particle under alkaline conditions, provided an oleophobic/superhydrophilic property on the modified surface. However, it was demonstrated that the surface wettability on the modified surface treated with the RF-(VM-SiO3/2)n-RF/RF-(VM-SiO3/2)x-(DMAA)y-RF/PSt composites changes dramatically from oleophobic/superhydrophilic to superoleophilic/superhydrophilic and superoleophilic/superhydrophobic characteristics, increasing with greater feed ratios (mg/mg) of the RF-(VM)n-RF homooligomer in homooligomer/cooligomer from 0 to 100 in the preparation of the composites. Such controlled surfac

Recent Advances in Interface Modification of Cu/graphite Composites and Layered Ternary Carbides of Modified Layer Candidate

We review the fundamental properties and significant issues related to Cu/graphite composites.In particular,recent research on the interfacial modification of Cu/graphite composites is addressed,including the metal-modified layer,carbide-modified layer,and combined modified layer.Additionally,we propose the use of ternary layered carbide as an interface modification layer for Cu/graphite composites.