Cu/TiO_(2) Photocatalysts for CO_(2) Reduction: Structure and Evolution of the Cocatalyst Active Form

Extensive work on a Cu-modified TiO_(2) photocatalyst for CO_(2) reduction under visible light irradiation was conducted. The structure of the copper cocatalyst was established using UV-vis diff use refl ectance spectroscopy, high-resolution transmis- sion electron microscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy. It was found that copper exists in different states (Cu 0 , Cu^(+) , and Cu^(2+) ), the content of which depends on the TiO_(2) calcination temperature and copper loading. The optimum composition of the cocatalyst has a photocatalyst based on TiO_(2) calcined at 700℃ and modified with 5 wt% copper, the activity of which is 22 μmol/(h·g cat ) (409 nm). Analysis of the photocatalysts after the photocatalytic reaction disclosed that the copper metal on the surface of the calcined TiO_(2) was gradually converted into Cu_(2) O during the photocatalytic reaction. Meanwhile, the metallic copper on the surface of the noncalcined TiO_(2) did not undergo any trans- formation during the reaction.

Recent progress in research and design concepts for the characterization,testing,and photocatalysts for nitrogen reduction reaction

The reduction of molecular nitrogen(N_(2))to ammonia(NH_(3))under mild conditions is one of the most promising studies in the energy field due to the important role of NH_(3)in modern industry,production,and life.The photocatalytic reduction of N_(2)is expected to achieve clean and sustainable NH_(3)production by using clean solar energy.To date,the new photocatalysts for photocatalytic reduction of N_(2)to NH_(3)at room temperature and atmospheric pressure have not been fully developed.The major challenge is to achieve high light-absorption efficiency,conversion efficiency,and stability of photocatalysts.Herein,the methods for measuring produced NH_(3)are compared,and the problems related to possible NH_(3)pollution in photocatalytic systems are mentioned to provide accurate ideas for measuring photocatalytic efficiency.The recent progress of nitrogen reduction reaction(NRR)photocatalysts at ambient temperature and pressure is summarized by introducing charge transfer,migration,and separation in photocatalytic NRR,which provides a guidance for the selection of future photocatalyst.More importantly,we introduce the latest research strategies of photocatalysts in detail,which can guide the preparation and design of photocatalysts with high NRR activity.

Recent advances in bismuth-based photocatalysts:Environment and energy applications

Photocatalysis is an effective way to solve the problems of environmental pollution and energy shortage.Numerous photocatalysts have been developed and various strategies have been proposed to improve the photocatalytic performance.Among them,Bi-based photocatalysts have become one of the most popular research topics due to their suitable band gaps,unique layered structures,and physicochemical properties.In this review,Bi-based photocatalysts(BiOX,BiVO_(4),Bi_(2)S_(3),Bi_(2)MoO_(6),and other Bi-based photocatalysts)have been summarized in the field of photocatalysis,including their applications of the removal of organic pollutants,hydrogen production,oxygen production etc.The preparation strategies on how to improve the photocatalytic performance and the possible photocatalytic mechanism are also summarized,which could supply new insights for fabricating high-efficient Bi-based photocatalysts.Finally,we summarize the current challenges and make a reasonable outlook on the future development direction of Bi-based photocatalysts.

Enhanced visible-light photocatalytic activity of Z-scheme graphitic carbon nitride/oxygen vacancy-rich zinc oxide hybrid photocatalysts

With the objectives of enhancing the stability,optical properties and visible-light photocatalytic activity of photocatalysts,we modified oxygen vacancy-rich zinc oxide（Vo-ZnO） with graphitic carbon nitride（g-C3N4）. The resulting g-C3N4/Vo-ZnO hybrid photocatalysts showed higher visible-light photocatalytic activity than pure Vo-ZnO and g-C3N4. The hybrid photocatalyst with a g-C3N4 content of 1 wt% exhibited the highest photocatalytic degradation activity under visible-light irradiation（λ≥ 400 nm）. In addition,the g-C3N4/Vo-ZnO photocatalyst was not deactivated after five cycles of methyl orange degradation,indicating that it is stable under light irradiation. Finally,a Z-scheme mechanism for the enhanced photocatalytic activity and stability of the g-C3N4/Vo-ZnO hybrid photocatalyst was proposed. The fast charge separation and transport within the g-C3N4/Vo-ZnO hybrid photocatalyst were attributed as the origins of its enhanced photocatalytic performance.

Synthesis of AgCl/Ti_(3)C_(2)@TiO_(2)Ternary Composite Photocatalysts for Photocatalytic Oxidation of 1,4-Dihydropyridine and Tetracycline Hydrochloride

AgCl/Ti_(3)C_(2)@TiO_(2)ternary composites were prepared to form a heterojunction structure between AgCl and TiO_(2)and introduce Ti3C2 as a cocatalyst.The as-prepared AgCl/Ti_(3)C_(2)@TiO_(2)composites showed higher photocatalytic activity than pure AgCl and Ti_(3)C_(2)@TiO_(2)for photooxidation of a 1,4-dihydropyridine derivative(1,4-DHP)and tetracycline hydrochloride(TCH)under visible light irradiation(λ>400 nm).The photocatalytic activity of AgCl/Ti_(3)C_(2)@TiO_(2)composites depended on Ti_(3)C_(2)@TiO_(2)content,and the catalytic activity of the optimized samples were 6.9 times higher than that of pure AgCl for 1,4-DHP photodehydrogenation and 7.3 times higher than that of Ti_(3)C_(2)@TiO_(2)for TCH photooxidation.The increased photocatalytic activity was due to the formation of a heterojunction structure between AgCl and TiO_(2)and the introduction of Ti3C2 as a cocatalyst,which lowered the internal resistance,sped up the charge transfer,and increased the separation efficiency of photogenerated carries.Photogenerated holes and superoxide radical anions were the major active species in the photocatalytic process.

Preparation and characterization of ternary magnetic g-C_3N_4 composite photocatalysts for removal of tetracycline under visible light

A stable PNIPAM/Fe_3O_4/g-C_3N_4 composite photocatalyst was designed and prepared by a thermal photoinitiation technology.The structure and properties of the materials were characterized and the composite photocatalyst was found to show good stability for tetracycline degradation.The sample not only retained the magnetic properties of Fe_3O_4,allowing it to be recycled,but its photocatalytic properties could also be changed by controlling the temperature of the reaction system.The degradation intermediate products of tetracycline were further investigated by MS.This work provides a new facile strategy for the development of intelligent and recyclable photocatalytic materials.

Fabrication of biomaterial/TiO2 composite photocatalysts for the selective removal of trace environmental pollutants

Trace environmental pollutants have become a serious problem with special attention on the hazardous heavy metals, refractory organics, and pathogenic microorganisms. With coupling biosorption and photocatalysis to develop biomaterial/TiO2 composite photocatalysts is a promising method to remove these trace pollutants because of the synergistic effect. Biomaterials provide multiple function groups which can selectively and efficiently enrich trace pollutants onto the surface of the photocatalysts, thus facilitating the following transformation mediated by TiO2 photocatalysis. Biomaterials can also help the dispersion and recovery of TiO2, or even modify the band structure of TiO2. The fabrication of chitosan/TiO2, cellulose/TiO2, as well as other biomaterial/TiO2 composite photocatalysts is discussed in detail in this review. The application significance of these composite photocatalysts for the selective removal of trace pollutants is also addressed. Several problems should be solved before the realistic applications can be achieved as discussed in the final section.

Synthesis plasmonic Bi/Bi VO4 photocatalysts with enhanced photocatalytic activity for degradation of tetracycline(TC)

In recent years,the excessive use of antibiotics has become a serious problem for human health.BiV04 regarded as one of the most promising visible-light-driven photocatalysts was used to degrade the antibiotics.In this paper,we fabricated Bi/BiV04 plasmonic photocatalysts which enhanced the photocatalytic activity of BiV04 for degradation of tetracycline(TC)antibiotic.The Bi/BiV04 photocatalysts were characterized by X-ray diffraction,X-ray photoelectron spectroscopy,scanning electron microscopy,transmission electron microscopy and high-resolution transmission electron microscopy.In addition,the photocatalytic experiment results show that the 0.04-Bi/BiVO4 sample has the best photocatalytic activity for 2 times than the pure BiV04 photocatalyst.The cycle experiments,after four repetitions of the experiments,showed the sample still maintained a high photocatalytic activity.Finally,the photocatalytic reaction mechanism was also studied by free radical capture experiments and electron paramagnetic resonance spectroscopy.

Visible-Light Activities of Erbium Doped BiVO4 Photocatalysts

Er-doped BiVO4 composite photocatalyst was hydrothermal synthesized and characterized by X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray Spectroscopy, X-ray photoelectron spectroscopy, and UV-Vis diffuse reflectance spectra techniques. The activity of the catalyst was determined by oxidative decomposition of methyl orange in aqueous solution under visible-light irradiation. X-ray photoelectron spectroscopy and energy-dispersive X-ray Spectroscopy analysis revealed that the doped Er existed in the form of Er2O3. It also showed that the Er doping can enhance the visible-light absorption abilities of catalysts and their visible-light-driven photocatalytic activities in comparison with those of pure BiVO4.

Fluorescent Superparamagnetic Core-Shell Nanostructures: Facile Synthesis of Fe@C-CN_xParticles for Reusable Photocatalysts

Synthesis and characterization of hybrid fluorescent superparamagnetic core-shell particles of Fe@C-CNx composition are presented for the first time. The prepared Fe@C-CNx hybrid nanoparticles were found to possess multifunctionality by exhibiting strong superparamagnetic properties and bright fluorescence emissions at 500 nm after the excitation with light in the UV-visible range. Fe@C-CNx also exhibits photocatalytic activities for organic dye degradation comparable to pure amorphous CNx with reusability through magnetic separation. The combination of magnetic and fluorescent properties of core-shell Fe@C-CNx nanoparticles opens opportunities for their application as sensors and magnet manipulated reusable photocatalysts. Superparamagnetic Fe@C core-shell nanoparticles were used as the template material in the synthesis, where the carbon shell was functionalized through one-step free-radical addition of alkyl groups terminated with carboxylic acid moieties. The method utilizes the organic acyl peroxide of dicarboxylic acid (succinic acid peroxide) as a non-oxidant functional free radical precursor for functionalization. Further, covalently functionalized succinyl-Fe@C core-shell nanoparticles were coated with the amorphous carbon nitride (CNx) generated by an in-situ solution-based chemical reaction of cyanuric chloride with lithium nitride. A detailed physicochemical characterization of the microstructure, magnetic and fluorescence properties of the synthesized hybrid nanoparticles is provided.

A review on TiO_2-based Z-scheme photocatalysts

TiO2‐based Z‐scheme photocatalysts have attracted considerable attention because of the low recombination rate of their photogenerated electron–hole pairs and their high photocatalytic efficiency.In this review,the reaction mechanism of Z‐scheme photocatalysts,recent research progress in the application of TiO2‐based Z‐scheme photocatalysts,and improved methods for photocatalytic performance enhancement are explored.Their applications,including water splitting,CO2reduction,decomposition of volatile organic compounds,and degradation of organic pollutants,are also described.The main factors affecting the photocatalytic performance of TiO2‐based Z‐scheme photocatalysts,such as pH,conductive medium,cocatalyst,architecture,and mass ratio,are discussed.Concluding remarks are presented,and some suggestions for the future development of TiO2‐based Z‐scheme photocatalysts are highlighted.

Recent advances on Bi_(2)WO_(6)‐based photocatalysts for environmental and energy applications

Bismuth tungstate(Bi_(2)WO_(6))has become a research hotspot due to its potential in photocatalytic energy conversion and environmental purification.Nevertheless,the limited light absorption and fast recombination of photogenerated carriers hinder the further improvement of the photocatalytic performance of Bi_(2)WO_(6).Herein,we provide a systematic review for the recent advances on Bi_(2)WO_(6)‐based photocatalysts.It starts with the crystal structure,optical properties and photocatalytic fundamentals of Bi_(2)WO_(6).Then,we focus on the modification strategies of Bi_(2)WO_(6)based on morphology control,atomic modulation and composite fabrication for diverse photocatalytic applications,such as organic synthesis,water splitting,CO2 reduction,water treatment,air purification,bacterial inactivation,etc.Finally,some current challenges and future development prospects are proposed.We expect that this review can provide a useful reference and guidance for the development of efficient Bi_(2)WO_(6)photocatalysts.

Inorganic-organic hybrid photocatalysts:Syntheses,mechanisms,and applications

Inorganic-organic hybrid materials are promising for application in the field of photocatalysis because of their excellent properties.Therefore,their syntheses,mechanisms,and applications are reviewed in this paper.First,we introduce the role of inorganic-organic photocatalysts,their advantages and disadvantages,and their design principles.Second,we present the top-down and bottom-up synthesis methods of the hybrid materials.The interaction between inorganic and organic components in hybrid materials is discussed,followed by how to improve inorganic-organic photocatalysts.Third,the applications of hybrid materials in the field of photocatalysis,such as realizing hydrogen evolution,organic pollutant degradation,heavy metals and CO_(2) reduction,sterilization,and nitrogen fixation,are examined.Finally,the application prospects and development directions of inorganic-organic hybrid materials are explored and the unsolved problems are described.

S-scheme Sb2WO6/g-C3N4 photocatalysts with enhanced visible-light-induced photocatalytic NO oxidation performance

Normal photocatalysts cannot effectively remove low-concentration NO because of the high recombination rate of the photogenerated carriers.To overcome this problem,S-scheme composites have been developed to fabricate photocatalysts.Herein,a novel S-scheme Sb2WO6/g-C3N4 nanocomposite was fabricated by an ultrasound-assisted method,which exhibited excellent performance for photocatalytic ppb-level NO removal.Compared with the pure constituents of the nanocomposite,the as-prepared 15%-Sb2WO6/g-C3N4 photocatalyst could remove more than 68%continuous-flowing NO(initial concentration:400 ppb)under visible-light irradiation in 30 min.The findings of the trapping experiments confirmed that•O2^–and h+were the important active species in the NO oxidation reaction.Meanwhile,the transient photocurrent response and PL spectroscopy analyses proved that the unique S-scheme structure of the samples could enhance the charge separation efficiency.In situ DRIFTS revealed that the photocatalytic reaction pathway of NO removal over the Sb2WO6/g-C3N4 nanocomposite occurred via an oxygen-induced route.The present work proposes a new concept for fabricating efficient photocatalysts for photocatalytic ppb-level NO oxidation and provides deeper insights into the mechanism of photocatalytic NO oxidation.

Tantalum （Oxy）Nitride： Narrow Bandgap Photocatalysts for Solar Hydrogen Generation

Photocatalytic water splitting, which directly converts solar energy into hydrogen, is one of the most desirable solar-energy-conversion approaches. The ultimate target of photocatalysis is to explore efficient and stable photocatalysts for solar water splitting. Tantalum （oxy）nitride-based materials are a class of the most promising photocatalysts for solar water splitting because of their narrow bandgaps and sufficient band energy potentials for water splitting. Tantalum （oxy）nitride-based photocatalysts have experienced intensive exploration, and encouraging progress has been achieved over the past years. However, the solar- to-hydrogen （STH） conversion efficiency is still very far from its theoretical value. The question of how to better design these materials in order to further improve their water-splitting capability is of interest and importance. This review summarizes the development of tantalum （oxy）nitride-based photocatalysts for solar water spitting. Special interest is paid to important strategies for improving photocatalytic water- splitting efficiency. This paper also proposes future trends to explore in the research area of tantalum-based narrow bandgap photocatalysts for solar water splitting.

Preparation of V-doped TiO_2 Photocatalysts by the Solution Combustion Method and Their Visible Light Photocatalysis Activities

A series of nanocrystalline V-doped （0.0-3.0 at.%） TiO2 catalysts have been successfully prepared by the one-step solution combustion method using urea as a fuel. The obtained powders were characterized by XRD, SEM, Raman, XPS and UV-Vis DRS. The effects of V doping concentration on the phase structure and photocatalytic properties were investigated. XRD, Raman, and XPS show that V doping diffuses into TiO2 crystal lattice mainly in the form of V5＋ and causes a phase transition from anatase to mille. V doping can widen the light absorption range of TiO2, with the absorption threshold wavelength shifting from 425 to 625 nm. The photocatalytic activity of V-doped TiO2 powders were evaluated by the photocatalytic degradation of methyl orange （MO） under visible light irradiation. It is found that V doping enhances the photoeatalyilc activity under visible light irradiation and the optimal degradation rate of MO is about 95.8% with 1.0 at% V-doped TiO2.

Covalently integrated core-shell MOF@COF hybrids as efficient visible-light-driven photocatalysts for selective oxidation of alcohols

Building a covalently connected structure with accelerated photo-induced electrons and charge-carrier separation between semiconductors could enhance the photocatalytic performance.In this work,we report a facile and novel seed growth method to coat NH2-MIL-125 MOFs with crystalline and porous covalent organic frameworks(COFs)materials and form a range of NH2-MIL-125@TAPB-PDA nanocomposites with different thicknesses of COF shell.The introduction of appropriate content of COF could not only modify the intrinsic electronic and optical properties,but also enhance the photocatalytic activity distinctly.Especially,NH2-MIL-125@TAPB-PDA-3 with COF shell thickness of around 20nm exhibited the highest yield(94.7%)of benzaldehyde which is approximately 2.5 and 15.5 times as that of parental NH2-MIL-125 and COF,respectively.The promoted photocatalytic performance of hybrid materials was mainly owing to the enhanced photo-induced charge carriers transfer between the MOF and COF through the covalent bond.In addition,a possible mechanism to elucidate the process of photocatalysis was explored.Therefore,this kind of MOF-based photocatalysts possesses great potentials in future green organic synthesis.

Electrochemical Generation of Cubic Shaped Nano Zn_2SnO_4 Photocatalysts

In this contribution, an efficient and simple two-step hybrid electrochemical-thermal route was developed for the synthesis of cubic shaped Zn_2SnO_4 (ZTO) nanoparticles using aqueous sodium bicarbonate(NaHCO_3) and sodium stannate(Na_2SnO_3) electrolyte. The sacrificial Zn was used as anode and cathode in an undivided cell under galvanostatic mode at room temperature. The bath concentration and current density were respectively varied from 30 to 120 mmol and 0.05 to 1.5 A/dm^2. The electrochemically generated precursor was calcined for an hour at different range of temperature from 60 to 600. The crystallite sizes in the range of 24-53 nm were calculated based on Debye-Scherrer equation. Scanning electron microscope and transmission electron microscopy results reveal that all the particles have cubic morphology with diameter of40-50 nm. The as-prepared ZTO samples showed higher catalytic activity towards the degradation of methylene blue(MB) dye, and 90% degradation was found for the sample calcined at 600, which is greater than that of commercial TiO_2-P25 photocatalysts. The photodegradation efficiency of ZTO samples was found to be a function of exposure time and the dye solution p H value. These results indicate that the ZTO nanoparticles may be employed to remove dyes from wastewater.

Influence of Ag on photocatalytic performance of Ag/ZnO nanosheet photocatalysts

Ag/ZnO nanosheet composites were prepared by zinc nitrate, sodium hydroxide and silver nitrate via a simple hydrothermal method. The crystal structure, morphology, optical property and photocatalytic performance were studied by means of XRD, SEM, HRTEM, XPS, and PL methods. It is found that both the pure ZnO and composite Ag/ZnO samples have the same morphology of nanosheet. The interaction of spherical Ag particles with ZnO matrix in the Ag/ZnO sample leads to an increase in photocatalytic efficiency for the possible increase of concentration of surface hydroxyl and the photo-induced electrons and holes. The addition of Ag can reduce the recombination rate of photo-generated carriers and the sample with addition of 3 at% Ag to ZnO exhibits the best photocatalytic activity with the degradation rate up to 95% within 15 min.

Preparation of Bentonite Supported Nano Titanium Dioxide Photocatalysts by Electrostatic Self-assembly Method

Electrostatic self-assembly method （ESAM） was used to prepare bentonite supported-nano titanium dioxide photocatalysts. The materials were characterized by X-ray diffraction （XRD）, fourier transform infrared spectroscopy （FT-IR） and scanning electron microscopy （SEM）. Methyl orange was used to estimate the photocatalytic activity of the materials. The effects of the calcination temperature and silane dosage on the photocatalytic activity of the samples were investigated. The experimental results show that the bentonite facilitates the formation of anatase and restrains the transformation of anatase to rutile. Part of nano-size TiO2 particles insert into the galleries of bentonite. The photocatalysts exhibit a synergistic effect of adsorption and photocatalysis on methyl orange. Photocatalysts prepared by ESAM method exhibit higher photocatalytic activity and better recycle ability than those of the traditional method.