Sol-gel Preparation Copper-cadmium Halide DopedPhotochromic Glass Coating on Plate Glass

Copper-cadmium halide doped photochromic glass coating on plate glass has been prepared by a sol-gel process. The sample shows reversible photochromic effect. The results of X-ray diffraction (XRD) and infrared (IR) spectrum investigations indicate that the photochromic phase of tile coating is CuBr_xCl_(1-x), solid solution, and that the structure network of the coating is connected with the bonds of Si-O-Si, Si-O-B and Si-O-Al.

DNA Modification with Photochromic Spiro Compounds

The photochromic spiropyrans and spirooxazine having a succinimidyl ester or isothiocyanate pendant group can form covalent products with transaminated DNA. The absorption spectra and solid reflection spectra of modified DNA with these photochromic spiro compounds were investigated.

Synthesis, Structure and Properties of Two Photochromic Compounds Containing A Pyrazolone-ring

Two photochromic compounds with the pyrazolonering as the photochromic functional structure, 2(1phenyl3methyl4benzoformylpyrazolone5)thiosemicarbazone(PMBPTSC) and 2(1phenyl3methyl4benzoformylpyrazolone5)smethylthiosemicarbazone(PMBPMTSC), were synthesized and characterized by elemental analysis, MS, IR spectra, NMR spectra. The crystal structure of the photocolored product of PMBPTSC was determined by single crystal XRD analysis. The results show that the photochromic phenomenon is due to the photoisomerization from enol form to keto form. Their photochromic properties were studied by powderUV reflectance spectra under the irradiation of 200—380 nm light. The firstorder rate constants of the photocoloring reaction were found to be 780×10 -3 s -1 for compound 1A and 103×10 -3 s -1 for compound 2A.

Preparation of Photochromic Waterborne Polyurethane Films:Effect of Spiropyran Concentration on Photochromic Properties

Incorporation of photochromic compounds to the polymer through chemical bonding will result in an enhancement of photoactivity and stabilization of optical properties.Here,spiropyran(SP)was introduced into polyurethane(PU)through semi-continuous emulsion copolymerization to get waterborne polyurethane dispersion(SPU).Studies on photochromic properties by UV-vis technique demonstrated the absorption intensity increased with the increasing of SP concentration and the colorless film turned to purple under UV irradiation.The kinetics for ring-opening and ring-closing reaction against SP were both first order,but the rate constants decreased with the increasing of SP concentration.The prepared SPU films showed reasonable photostability and photoreversibility according to the convenient test methods under UV-vis irradiation.Temperature dependence studies demonstrated that the photobleaching rate increased at higher temperatures with the same SP concentration.The chemical combination between SP and isocyanate(NCO)end group of polyurethane was confirmed through swelling experiments.Morphology studies were conducted by scanning electron microscope(SEM)micrographs and showed good compatibility between SP and PU.

Synthesis,Structure and Properties of a Novel Copolymer with Photochromic and Photoluminescence Functions

Photochromic and photoluminescence materials show bright colors under different excitation conditions,and thus,these functional materials have been applied in many fields.Based on the photochromic and photoluminescence theories,a block copolymer,which could be directly processed into nanofibers by electrospinning,was successfully prepared through atom transfer radical polymerization(ATRP).To synthesize the block copolymer,a vinyl monomer containing a spiropyran unit was employed to prepare the photochromic chain segment,and a polymethyl methacrylate(PMMA)chain segment was introduced to improve the processability of the block copolymer.Acting as the photoluminescence unit,the rare earth complex was linked to the side chain through coordination bonding between the rare earth ions and the ester groups of PMMA.When the photochromic and photoluminescence block copolymer was exposed to different wavelengths of ultraviolet(UV)light and visible(Vis)light,it could show white,red,green,yellow,and blue-purple.These results provide the potential of the as-prepared photochromic and photoluminescence block copolymer for application in fibers and fabrics.

Transparent Photochromic Wood Composites Incorporating AgBr Nanoparticles for UV-shielding Applications

Transparent wood(TW)is a wood-based biomaterial with several advantages,such as high optical transmittance,low thermal conductivity,and tunable haze.TW is functionalized according to its transparency to broaden its applications in different fields.Several studies have examined wood functionalization in recent years;however,few studies have reported photochromic TW(PTW)for ultraviolet(UV)-shielding window applications.Herein,PTW was obtained by infiltrating the delignified wood template with photochromic silver bromide(AgBr)nanoparticles and a pre-polymerized methyl methacrylate(MMA)mixture solution.The obtained PTW can adjust the luminous flux on change in the color in the visible light region.The photochromic properties were examined,and the optical properties of the composites were characterized using UV-Vis spectrophotometry.Light transmittance of PTW was up to 86.5%at 800 nm before UV irradiation,and it decreased to 70.1%at 800 nm after UV irradiation,as the wood color changed from colorless to dark purple under UV irradiation.Thus,this work not only achieves high-value utilization of wood,but also produces a new material that can be used in varied fields,such as UV-shielding,energy saving,and smart building.

Processes underlying the laser photochromic effect in colloidal plasmonic nanoparticle aggregates

We have studied the dynamic and static processes occurring in disordered multiparticle colloidal Ag aggregates with natural structure and affecting their plasmonic absorption spectra under pico-and nanosecond pulsed laser radiations, as well as the physical origin responsible for these processes. We have shown that depending on the duration of the laser pulse,the mechanisms of laser modification of such aggregates can be associated both with changes in the resonant properties of the particles due to their heating and melting(picosecond irradiation mode) and with the particle shifts in the resonant domains of the aggregates(nanosecond pulses) which depend on the wavelength, intensity, and polarization of the radiation.These mechanisms result in formation of a narrow dip in the plasmonic absorption spectrum of the aggregates near the laser radiation wavelength and affect the shape and position of the dip. The effect of polydispersity of nanoparticle aggregates on laser photochromic reaction has been studied.

Photochromic behavior and mechanism of thin films containing tungstosilicate acid

A novel reversible photochromic nanocomposite film based on a hybrid inorganic-organic matrix in which heteropolyacid H4SiW12O40 （SiWA） was entrapped in Si-O-Ti network was prepared. Structure, photochromic behaviors and mechanism of the film were investigated by means of infrared spectroscopy （IR）, ultraviolet-visible （UV-Vis） absorption spectra and electron spin resonance （ESR）. The results showed that heteropolyanion i.e. SiW12O^4- 40 （SiW12）, maintained a Keggin structure in the film and there was a strong interaction between anion SiW12 and cation R-NH^＋3 （R=link of hybrid composite）. The photochromic properties of the composite film originated from reversible charge transfer between the anions and cations. Under UV irradiation, the anion would be reduced via one-electron step with simultaneous oxidation of the cation, accompanied by a color change from colorless to blue. Bleaching could occur when the film was in contact with ambient air or 02 in the dark.

Restriction of shot noise and material noise in a multilevel photochromic memory on signal-to-noise ratio

The recording density of multilevel photochromic memory is limited by the signal-to-noise ratio （SNR） of the readout signal. In this paper, shot noise and material noise are investigated through theoretical analysis of SNR. When the bandwidth of a system is less than 1MHz, the material noise takes a prominent position; when the bandwidth of the system is more than 10MHz, the shot noise becomes dominant. The thickness of recording layer can be optimized to maximize the SNR and reduce the influence of the bandwidth of the system on SNR.

THE INFLUENCE OF HEAT TREATMENT ON OPTICAL PROPERTY OF ION EXCHANGE PHOTOCHROMIC GLASS

In this paper, the influence of heat treatment on transmittance and the photochromic of ion exchange photochromic glass was studied, the microstructure of glass as well as the forming of AgX crystals were discussed. It is believed that heat treatment temperature affects precipitating of AgX crystal, and the AgX crystal is a dominant factor affecting surface photochromic properties of ion exchange photochromic glass.

PROPERTIES AND STRUCTURE OF COPPER-CADMIUM HALIDE PHOTOCHROMIC GLASSES

The photochromic properties of photochromic glasses containing both copper halides and cadmium halides depend mainly upon the body glass composi- tion. The composition range of glass matrix can be described by F=[(R_20+MO)-Al_20_3]/B_20_3·In this paper, the basic structure of the glasses is investigated in terms of IR and Raman spectroscopy in detail. The results demonstrate that the network of body glass is constructed by [SiO_4], [BO_3], [BO_4] and [Al0_4], in which [BO_3] and [BO_4] are interconnec- ted into two kinds of borate groups and a kind of boroxol ring. Finally, the relationships between structure and properties have been discussed on the scale of molecules and molecular groups.

Preparation of Dithienylethene with Amino Groups, and Photochromic Behavior in Langmuir-Blodgett Film of the Amphiphilicdithienylethene

We successfully synthesized dithienylethene with amino groups. Then, we successfully prepared Langmuir-Blodgett (LB) films of the dithienylethene having ammonium cation group when dodecyl benzene sulfonic acid was employed as an anionic counter ion. From X-ray diffraction profiles, however, it was demonstrated that they did not form well-defined layered structure;X-ray diffraction peaks were much broadened. Photochromic behavior was confirmed in the LB films. Unfortunately, the LB films were not so stable;photochromic reaction was observed only several times in the LB films.

Synthesis and Properties of a Novel Photochromic Compound

A new photochromic compound containing pyrazolone-ring was synthesized, and its crystal structure was determined on X-ray singlecrystal diffraction, which belongs to monoclinic crystal system, space group P21/c. The UV spectrum of the compound is studied.

Spectral Properties and Photochromic Characteristics of Spiropyran Dyes

A bis-benzospiropyran（BBSP） and nitro-substituted indoline spirobenzopyrans（SBP） were prepared by following a simple procedure. The reaction mechanism of synthesizing bis-benzospiropyran is discussed. A comparative analysis of the spectral and photochromic properties between SBP and BBSP was carried out with the aid of a PMMA film. The results indicate that chemical structures and UV irradiation played an important role in the spectral and photochromic properties of SBP and BBSP, which would readily affect λmax of the colored forms and the reversibility. The IR spectra and ^1H NMR spectra of these compounds are used to interpret the photochromic phenomena under different UV irradiation and determine the configurations of SBP and BBSP.

Preparation and Photochromic Behavior of Novel Hybrid Inorganic-Organic Thin Film

A novel photochromic complex comprising of Keggin type tungstophosphate acid (PW12) and polyacrylamide (PAM) was prepared. FT-IR results showed that the Keggin geometry of PW12 was still preserved inside the composite, and a charge-transfer bridge was built between PW12 and PAM via hydrogen bond. AFM images indicated that surface topography of polymer matrix changed after adding PW12. Under UV irradiation, the film was reduced photochemically to yield a blue species, which was reversible in the present of oxygen in polymeric network.

Crystal Structure and Photochromic Properties of [1-(2-Methyl-5-(4-cyanophenyl)-3-thienyl)]-2-(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene

A new photochromic diarylethene, [1-（2-methyl-5-（4-cyanophenyl）-3-thienyl-2- （2-methyl-5-phenyl-3-thienyl）]perfluorocyclopentene （lo, C28H17F6NS2）, was synthesized and its structure was determined by single-crystal X-ray diffraction analysis. Its crystal belongs to the monoclinic system, space group P21/c with a = 24.1381（5）, b = 9.3834（6）, c = 11.1073（8）, fl = 94.477（4）°, Z = 4, V= 2508.1（3） A3, Dc = 1.445 mg/m3, μ = 0.275, F（000） = 1112, the final R = 0.0482 and wR = 0.1429 for 5834 observed reflections （I 〉 2σ（I））. Further study demonstrated the diarylethene underwent reversible photochromism, changing between colorless and blue in hexane solution, crystalline phase and PMMA films, respectively.

PHOTOCHROMIC PROPERTIES OF (E)-DICYCLOPROPYLMETHYLENE-(2,5-DIMETHYL-3-FURYLETHYLIDENE)-SUCCINIC ANHYDRIDE DOPED IN POLYSTYRENE THIN FILMS

Fulgide 1-E doped in polystyrene polymer films was heated at various annealing temperatures.Upon irradiation with UV light(366 nm),fulgide 1-E undergoes a conrotatory ring closure to the pink colored closed form 1-C.The later color was switched back to the original color when the films were irradiated with white light.The kinetics of photocoloration and photobleaching processes were followed spectrophotometrically by monitoring the absorbance of the ring closed product 1-C at itsλ_(max) of 525 nm.The first-...