Analysis of response time probability distribution of workflows

An evaluation approach for the response time probability distribution of workflows based on the fluid stochastic Petri net formalism is presented. Firstly, some problems about stochastic workflow net modeling are discussed. Then how to convert a stochastic workflow net model into a fluid stochastic Petri net model is described. The response time distribution can be obtained directly upon the transient state solution of the fluid stochastic Petri net model. In the proposed approach, there are not any restrictions on the structure of workflow models, and the processing times of workflow tasks can be modeled by using arbitrary probability distributions. Large workflow models can be efficiently tackled by recursively using a net reduction technique.

Response time of variable transparency glass and its application to welding goggles

The behavior of variable transparency glass is studied, and the response time analyzed and measured aimed at applications to welding goggles. Detection apparatus for goggle testing is involved in the design and development. Charac-teristics of the apparatus are discussed based on experiments. The definition of nominal response time and effective response time are presented based on the analysis and calculation with experimental data.

Finite Difference Solution of Response Time Delay of Magneto-rhelological Damper

Magneto-rhelological（MR） dampers are devices that employ rheological fluids to modify their mechanical properties. Their mechanical simplicity, high dynamic range, lower power requirements, large force capacity, robustness and safe maimer of operation in cases of failure have made them attractive devices for semi-active real-time control in civil, aerospace and automotive applications. Time response characteristic is one of the most important technical performances of MR dampers, and response time directly affects the control frequency, application range and the actual effect of MR dampers. In this study, one kind of finite difference solution for predicting the response time ofmagneto-rheological dampers from ＂off-state＂ to ＂on-state＂ is put forward. A laminar flow model is used to describe the flow in the MR valve, and a bi-viscous fluid flow model is utilized to describe the relationship of shear stress and shear rate of MR fluid. An explicit difference format is used to diseretize the Novior-Stoks equation, and stability condition of this algorithm is built by Von-Neumann stability criterion. The pressure gradient along the flow duct is solved by a dichotomy algorithm with iteration, and the changing curve of the damping force versus time of MR damper is obtained as well. According to the abovementioned numerical algorithm, the damping forces versus time curves from ＂off-state＂ to ＂on-state＂ of a cylindrical piston type MR damper are computed. Moreover, the MR damper is installed in a material test system（MTS）, the magnetic field in the wire circles of the MR damper is ＂triggered＂ when the MR damper is imposed to do a constant speed motion, and the damping force curves are recorded. The comparison between numerical results and experimental results indicates that this finite difference algorithm can be used to estimate the response time delay of MR dampers.

Fork-Join program response time on multiprocessors with exchangeable join

The Fork-Join program consisting of K parallel tasks is a useful model for a large number of computing applications. When the parallel processor has multi-channels, later tasks may finish execution earlier than their earlier tasks and may join with tasks from other programs. This phenomenon is called exchangeable join (EJ), which introduces correlation to the task’s service time. In this work, we investigate the response time of multiprocessor systems with EJ with a new approach. We analyze two aspects of this kind of systems: exchangeable join (EJ) and the capacity constraint (CC). We prove that the system response time can be effectively reduced by EJ, while the reduced amount is constrained by the capacity of the multiprocessor. An upper bound model is constructed based on this analysis and a quick estimation algorithm is proposed. The approximation formula is verified by extensive simulation results, which show that the relative error of approximation is less than 5%.

The simulation of temperature dependence of responsivity and response time for 6H-SiC UV photodetector

In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet （UV） photodetector is simulated based on numerical model in the range from 300 K to 900 K. The simulation results show that the responsivity and the response time of device are less sensitive to temperature and this kind of UV photodetector has excellent temperature stability. Also the effects of device structure and bias voltage on the responsivity and the response time are presented. The thicker the drift region is, the higher the responsivity and the longer the response time are. So the thickness of drift region has to be carefully designed to make trade-off between responsivity and response time.

The Response Time Analysis of Digital Broadcasting System

Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.

An Improved Text-Based and Image-Based CAPTCHA Based on Solving and Response Time

CAPTCHA is an acronym that stands for Completely Automated Public Turing Test to tell Computers and Humans Apart(CAPTCHA),it is a good example of an authentication system that can be used to determine the true identity of any user.It serves as a security measure to prevent an attack caused by web bots(automatic programs)during an online transaction.It can come as text-based or image-based depending on the project and the programmer.The usability and robustness,as well as level of security,provided each of the varies and call for the development of an improved system.Hence,this paper studied and improved two different CAPTCHA systems(the text-based CAPTCHA and image-based CAPTCHA).The textbased and image-based CAPTCHAwere designed using JavaScript.Response time and solving time are the two metrics used to determine the effectiveness and efficiency of the two CAPTCHA systems.The inclusion of response time and solving time improved the shortfall of the usability and robustness of the existing system.The developed system was tested using 200 students from the Federal College of Animal Health and Production Technology.The results of each of the participants,for the two CAPTCHAs,were extracted from the database and subjected to analysis using SPSS.The result shows that textbased CAPTCHAhas the lowest average solving time(21.3333 s)with a 47.8%success rate while image-based CAPTCHA has the highest average solving time was 23.5138 s with a 52.8%success rate.The average response time for the image-based CAPTCHA was 2.1855 s with a 37.9%success rate lower than the text-based CAPTCHA response time(3.5561 s)with a 62.1%success rate.This indicates that the text-based CAPTCHA is more effective in terms of usability tests while image-based CAPTCHA is more efficient in terms of system responsiveness and recommended for potential users.

Strong-field response time and its implications on attosecond measurement

To measure and control the electron motion in atoms and molecules by the strong laser field on the attosecond time scale is one of the research frontiers of atomic and molecular photophysics. It involves many new phenomena and processes and raises a series of questions of concepts, theories, and methods. Recent studies show that the Coulomb potential can cause the ionization time lag(about 100 attoseconds) between instants of the field maximum and the ionization-rate maximum. This lag can be understood as the response time of the electronic wave function to the strong-field-induced ionization event. It has a profound influence on the subsequent ultrafast dynamics of the ionized electron and can significantly change the time–frequency properties of electron trajectory(an important theoretical tool for attosecond measurement). Here, the research progress of response time and its implications on attosecond measurement are briefly introduced.

The Application of Information Systems to Improve Ambulance Response Times in the UK

Emergency ambulance services in the UK are tasked with providing pre-hospital patient care and clinical services with a target response time between call connect to on-scene attendance.In 2017,NHS England introduced four new response time categories based on patient needs.The most challenging is to be on-scene for a life-threatening situation within seven minutes of the call being connected when such calls are random in terms of time and place throughout a large territory.Recent evidence indicates emergency ambulance services regularly fall short of achieving the target ambulance response times set by the National Health Service(NHS).To achieve these targets,they need to undertake transformational change and apply statistical,operations research and artificial intelligence techniques in the form of five separate modules covering demand forecasting,plus locate,allocate,dispatch,monitoring and re-deployment of resources.These modules should be linked in real-time employing a data warehouse to minimise computational data and generate accurate,meaningful and timely decisions ensuring patients receive an appropriate and timely response.A simulation covering a limited geographical area,time and operational data concluded that this form of integration of the five modules provides accurate and timely data upon which to make decisions that effectively improve ambulance response times.

Factors Influencing the Emergency Medical Service Response Time for Cardiovascular Disease in Guangzhou, China

While emergency medical service (EMS) response time (ERT) is a major factor associated with the survival of patients with cardiovascular disease (CVD), relatively few studies have explored the factors associated with ERT. This study aimed to assess the current status of ERT and to identify the factors affecting ERT in patients with CVD in China. Between January 1, 2011 and December 31, 2015, EMS responses to CVD incidents in Guangzhou, China, were examined. The primary outcome was ERT, defined as the time from receipt of an emergency call to the arrival of paramedics on the scene. Factors associated with ERT were evaluated by multivariable logistic regression. A total of 44 383 CVD incidents were analysed. The median ERT was 12.58 min (interquartile range=9.98-15.67). Among the risk factors, distance (OR=13.73, 95% CI=11.76- 16.04), level of hospital (OR=1.57, 95% CI=1.40-1.75), and site of the incident (OR=1.53, 95% CI=1.38-1.69) were the top three significant factors affecting the ERT. Our results suggest that greater attention should be given to factors affecting the ERT. It is essential to make continuous efforts to promote the development of effective interventions to reduce the response time.

A GIS-Based Decision Support System for Reducing Air Ambulance Response Times: A Case Study on Public Schools in Jeddah City

In injuries reducing ambulance response time (time from injury to hospital arrival) is an important factor for saving people’s lives. Helicopter emergency medical services can reduce out-of-hospital transport times because of their high speed and their ability to travel in straight paths?unlike ground ambulance which are restricted to road network paths, as well as the ability toaccess rural or remote area injuries that are difficult to reach by ground ambulance. GIS technology aids air ambulance movement planning to reduce out-of-hospital response time based on mathematical and geographic models to support decision making which is necessary from out-of-hospital care providers. The goal of this study is to use GIS to develop an efficient DSS to outline where air ambulance can reduce response times, by using spatial analysis tools to create Euclidean distance and direction zones around receiving hospitals. The study concludes that GIS technology can be used to develop an efficient DSS to outline where air ambulance can reduce response times, by creating surfaces of Euclidean allocation, direction, and distance that can be used to improve initial response times for the civil defense air rescue and air ambulance services.

Dielectric Analysis of Response Time in Electrorheological Fluids Developed for Medical Devices

Three electrorheological fluids (ERFs) of recently synthesized Polyaniline.HCl and Cellulose fluids as well as a commercial product from Fludicon? (Germany), were evaluated with a two-electrode probe unit and by Dielectric Analysis (DEA). The study was a part of an ongoing medical device development project. The dielectric response times were calculated using the critical peak frequency in a corresponding Debye plot of Tan Delta (loss factor/permittivity) vs. log frequency. The DEA revealed the response times (tau, τ) in ms. The Fludicon? ERF was DEA durable (repeat cycles produced same results) and the τ was temperature dependent: 16 ms at 25°C and 0.16 ms at 80°C. The Cellulose ERF was somewhat DEA durable and the τ was 5.5 ms at 25°C and 0.21 ms at 80°C. The response times were logarithmic with the temperature (°C) with a correlation coefficient of >0.98 for the Cellulose and Fludicon? ERFs. The Polyaniline ERF had a τ of 53 ms at 25°C in the 1st DEA run and there was no indication of a τ for the remaining DEA tests.

Atomically thin heterostructure with gap-mode plasmon for overcoming trade-off between photoresponsivity and response time

Two-dimensional(2D)materials have recently provided a new perspective on optoelectronics because of their unique layered structure and excellent physical properties.However,their potential use as optoelectric devices has been limited by the trade-off between photoresponsivity and response time.Here,based on a vertically stacked atomically thin p-n junction,we propose a gap-mode plasmon structure that simultaneously enables enhanced responsivity and rapid photodetection.The atomically thin 2D materials act as a spacer for enhancing the gap-mode plasmons,and their short transit length in the vertical direction allows fast photocarrier transport.We demonstrate a high responsivity of up to 8.67 A/W with a high operation speed that exceeds 35 MHz under a 30 nW laser power.Spectral photocurrent,absorption,and a numerical simulation are used to verify the effectiveness of the gap-mode plasmons in the device.We believe that the design strategy proposed in this study can pave the way for a platform to overcome the trade-off between responsivity and response time.

Effects of Driver Response Time Under Take‑Over Control Based on CAR‑ToC Model in Human–Machine Mixed Traffic Flow

The take-over control(ToC)of human–machine interaction is a hotspot.From automatic driving to manual driving,some factors affecting driver response time have not been considered in existing models,and little attention has been paid to its effects on mixed traffic flow.This study establishes a ToC model of response based on adaptive control of thought-rational cognitive architecture(CAR-ToC)to investigate the effects of driver response time on traffic flow.A quantification method of driver’s situation cognition uncertainty is also proposed.This method can directly describe the cognitive effect of drivers with different cognitive characteristics on vehicle cluster situations.The results show that when driver response time in ToC is 4.2 s,the traffic state is the best.The greater the response time is,the more obvious the stop-and-go waves exhibit.Besides,crashes happen when manual vehicles hit other types of vehicles in ToC.Effects of driver response time on traffic are illustrated and verified from various aspects.Experiments are designed to verify that road efficiency and safety are increased by using a dynamic take-over strategy.Further,internal causes of effects are revealed and suggestions are discussed for the safety and efficiency of autonomous vehicles.

Investigation of response time of small footprint photonic crystal AND logic gate

In this paper, the response time of all-optical AND logic gate using the triangular photonic crystal lattice is investigated. The proposed logic gate consists of a photonic crystal nano-resonator formed by changing the size of the dielectric rods. The structure benefits the interference effect mechanism. The contrast ratio of the photonic crystal AND logic gate is obtained as 6 d B. In addition to simplicity, the designed nano-resonator increases the bit rate of logic gate. The delay time and footprint of logic gate are respectively 0.32 ps and 146 μm2. The proposed photonic crystal AND logic gate can operate at a bit rate of 3.12 Tbit/s。

Response Time of Reactive Power Based on Different Definitions and Algorithms

Dynamic reactive power compensation equipment typically requires a fast response to output the necessary reactive power.The term"dynamic response time of reactive power"is often used but has never been clearly defined.This paper summarizes the reactive power calculations under different definitions and algorithms and considers these calculations in terms of signal processing to simulate and analyze the step response.This paper subsequently focuses on the widely used instantaneous reactive power algorithm and finally concludes that the dynamic reactive power response time closely depends on the reactive power calculation method itself.The single-phase instantaneous reactive power algorithm has the fastest response time.The reactive power response time of dynamic reactive devices in power systems is a minimum of a quarter of one cycle time for the well-known and widely used single-phase reactive power algorithms.

Improving surveys with paradata:analytic uses of response time A study based on process information of China Family Dynamic Survey

This study uses paradata and survey data from the China Family Dynamic Survey to analyze the issue of response time in a questionnaire survey.The survey questions were classified into three levels and we compared the inter-group differences of response time between four kinds of questions which included information inquiries,logical calculations,intimate information and logical judgments.We used OLS method to perform a regression analysis to identify the impediments to response time and discussed the roles played by the survey locale,and the characteristics of interviewees and those of interviewers.The major impediments that prolonged response time were factors that impeded comprehension of the survey.The impediments included the difficulties interviewees had understanding questions,questions that did not take into account the different cultural backgrounds of interviewees,the complexity of questionnaires,and the performance of interviewers.Finally,this paper puts forward some suggestions for questionnaire design and investigation processes to reduce impediments to comprehension and improve the ability of interviewers.

Study on I/O response time bounds of networked storage systems

In order to predict and improve the performance of networked storage systems,this paper explored the rela-tionship between the system I/O response time and its per-formance factors by quantitative analytical method.Through analyzing data flow in networked RAID storage system,we established its analytical model utilizing closed queueing networks and studied the performance bounds of the system I/O response time.Experimental results show that the theo-retical bounds are found to be in agreement with the actual performance bounds of the networked RAID storage system and reflect the dynamic trend of its actual performance.Furthermore,it concludes that the CPU processing power and cache hit rate of the central storage server are the key factors affecting the I/O response time as the concurrent jobs are lower,while the network bandwidth and cache hit rate of the central storage server become the key factors as the concurrent jobs go higher.

What are the Acute Effects of Aerobic Exercise on Fractionated Response Time:A Systematic Review and Meta-analysis

Recently,there have been several studies that have examined the acute effects of aerobic exercise on cognitive function.Importantly,one precise indicator of cognitive function is response time(RT),which has two main components;premotor time(PMT)and motor time(MT).PMT is the time for perception,decision making and response preparation,while MT is executing the response.Using fractionated response time(FRT)instead of RT provides a more precise estimate of the location of the effect of aerobic exercise on cognitive or motor components of the response.There is emerging evidence that shows an acute bout of exercise may improve FRT.Therefore,the purpose of this systematic review and meta-analysis was to explore the acute effect of aerobic exercise on FRT by considering the effects of various cognitive function tests.Fourteen studies were included investigating FRT during and/or after aerobic exercise.The results indicated that during exercise,PMT increased in simple reaction time and decreased in flanker task;MT decreased in choice reaction time;interestingly,RT decreased when it was assessed by choice reaction time and flanker task,almost similar to PMT and MT.After exercise,PMT decreased specifically in flanker and go/no-go tasks.However,MT and RT did not change significantly.In conclusion,as changes in RT are affected by both PMT and MT,FRT provides a more precise estimate of the locus of the effects of aerobic exercise on response time.

Time Domain Simulation of Transient Responses of Very Large Floating Structures Under Unsteady External Loads

A time domain finite element method （FEM） for the analysis of transient elastic response of a very large floating structure （VLFS） subjected to arbitrary time-dependent external loads is presented. This method is developed directly in time domain and the hydrodynamic problem is formulated based on linear, inviscid and slightly compressible fluid theory and the structural response is analyzed on the thin plate assumption. The time domain finite element procedure herein is validated by comparing numerical results with available experimental data. Finally, the transient elastic response of a pontoon-type VLFS under the landing of an airplane is computed by the proposed time domain FEM. The time histories of the applied force and the position and velocity of an airplane during landing are modeled with data from a Boeing 747-400 jumbo jet.