SYNTHESIS AND PROPERTIES OF SULFONATED POLY(ARYLENE ETHER) CONTAINING TRIPHENYL METHANE MOIETIES FROM ISOCYNATE MASKED BISPHENOL

A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.

SYNTHESIS AND CHARACTERISTICS OF POLY(ARYLENE ETHER DIKETONE)S

Poly(arylene ether diketone)s were prepared by the aromatic nucleophilic displacement reaction of 4,4'-difluorobenzil with different bisphenols in the presence of anhydrous potassium carbonate in diphenylsulfone at elevated temperature. The polymers obtained had inherent viscosity of 0.51 similar to 0.63 dL/g, and exhibited glass transition temperature ranging from 136 similar to 217 degrees C mainly depending on the bisphenols used in the polymer synthesis. Thermogravimetry of these polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 428 degrees C and 438 degrees C in air and nitrogen, respectively. The mechanical properties of these polymers were also described and the permeability of five polymers for H-2, O-2 and N-2 was determined at 30 degrees C.

Tetra-alkylsulfonate functionalized poly(aryl ether) membranes with nanosized hydrophilic channels for efficient proton conduction

The microstructure of polymer electrolyte membranes plays a key role in ion conductivity and water transport.Herein,fluorinated poly(aryl ether)s with tetra-alkylsulfonate side chains(SFPAEs)have been successfully synthesized from the copolymerization of a newly developed tetra-allyl-containing bisphenol(TABP)monomer,followed by the thiol-ene addition with sodium 3-mercapto-1-propanesulfonate to attach the ionic groups at the end of the flexible chains.Being the first of its kind,the densely distributed and lengthy alkylsulfonate group possesses the benefit of ease to self-assemble into hydrophilic domains during membrane preparation via solution casting.Indeed,the TEM characterizations revealed that distinct hydrophilic channels of 1-2 nm width had been formed,much larger than those of a home-made control sample where only di-alkylsulfonate side chains were attached.The SFPAE-4-45 with an IECw of 2.0 mmol g^-1 exhibited an enhanced proton conductivity of 143.7 m S cm^-1 at room temperature,which was superior to that of Nafion 212(91.0 m S cm^-1).Furthermore,the oxidative stabilities of SFPAEs were significantly higher than those of non-fluorinated analogs in literature.This study offered a new route to engineering the pendent structure of ionomers for well-defined microscopic morphologies.

Enhancing energy storage density of poly(arylene ether nitrile)via incorporating modified barium titanate nanorods and hotstretching

Dielectric energy storage materials that are extensively employed in capacitors and other electronic devices have attracted increasing attentions amid the rapid progress of electronic technology.However,the commercialized polymeric and ceramic dielectric materials characterized by low energy storage density face numerous limitations in practical applications.In this study,we report the simultaneous enhancement of dielectric properties of poly(arylene ether nitrile)(PEN)through the incorporating of sulfonated PEN(SPEN)modified barium titanate nanorods(BTNR)(SPEN@BTNR)and hot-stretching.BTNR is synthesized using a two-step hydrothermal method,aminated with KH550,and then reacted with SPEN to form the cladding-modified SPEN@BTNR.Due to the intrinsic high permittivity of barium titanate(BT)and enhanced compatibility between SPEN@BTNR and PEN stemming from the cladding of SPEN,the dielectric constant and breakdown strength of SPEN@BTNR/PEN composite are as high as 14.0 at 103 Hz and 198.1 kV/mm at the doping amount of 15 wt.%,respectively.As a result,the energy storage density of SPEN@BTNR/PEN is increased to 2.43 J/cm^(3),compared with that of 0.82 J/cm^(3)for PEN.In addition,derived from the rearrangement of SPEN@BTNR and orientation of PEN after hot-stretching,the dielectric constant and breakdown strength of SPEN@BTNR/PEN with 15 wt.%fillers are further enhanced to 17.1 and 204.8 kV/mm,respectively,resulting in an energy storage density of 3.36 J/cm^(3).The boosting of energy storage density up to 310%provides a new idea for improving the performances of dielectric energy storage materials.

Selectivity enhancement of quaternized poly(arylene ether ketone)membranes by ion segregation for vanadium redox flow batteries

Quaternary ammonium densely functionalized octa-benzylmethyl-containing poly(arylene ether ketone)s(QA-OMPAEKs) with ion exchange capacities(IECs) ranging from 1.23 to 2.21 mmol g^(-1) were synthesized from:(1) Ullmann coupling extension of tetra-benzylmethyl-containing bisphenol A;(2) condensation polymerization with activated dihalide in the presence of K_2CO_3;(3) selective bromination using N-bromosuccinimide; and(4) quantitative quaternization using trimethylamine. Both smallangle X-ray scattering(SAXS) and transmission electron microscope(TEM) characterizations revealed distinct nano-phase separation in QA-OMPAEKs as a result of the dense quaternization. The QA-OMPAEK-20 with an IEC of 1.98 mmol g^(-1) exhibited a high SO_4^(2-) conductivity of 11.4 mS cm^(-1) and a low VO^(2+) permeability of 0.06×10^(-12) m^2 s^(-1) at room temperature,leading to a dramatically higher ion selectivity than Nafion N212. Consequently, the vanadium redox flow battery(VRFB)assembled with QA-OMPAEK-20 achieved a Coulombic efficiency of 96.9% and an energy efficiency of 84.8% at a current density of 50 mA cm^(-2), which were much higher than those of the batteries assembled with Nafion N212 and a home-made control membrane without distinct nano-phase separation. Therefore, ion segregation is demonstrated to be a strategical route for the design of high performance anion exchange membranes(AEMs) for VRFBs.

Properties of Multiblock Sulfonated Poly(arylene ether sulfone)s Synthesized by Precise Controllable Post-sulfonation for Proton Exchange Membranes

A series of multiblock sulfonated poly(arylene ether sulfone)s(SPAES)with various block lengths and predictable ion exchange capacity were synthesized from 4,4’-difluorodiphenyl sulfone,4,4’-dihydrodiphenyl sulfone and 4,4’-biphenol by one-pot and two-pot polymerization.;H-NMR and FTIR spectra confirmed the structure that sulfonic acid groups were introduced precisely on the poly(arylene ether sulfone)s by post-sulfonation which resulted in controllable sulfonation degree.The proton exchange membranes(PEMs)-based SPAES displayed excellent dimensional,thermal,antioxidant stability,proton conductivity and mechanical properties(maximum tensile stress>35 MPa).Thermogravimetric analysis indicated the prepared SPAES began to degrade above 310℃.The effects of polymerization processes,those were,one-pot hydrophobic segment process,one-pot hydrophilic segment process and two-pot process,on the properties of polymers were investigated.The proton conductivity and microphase separation of SPAES PEMs increased in order of those prepared by one-pot hydrophobic segment process,two-pot process and one-pot hydrophilic segment process.The highest conductivities of SPAES synthesized by the above processes under 80℃ and 100%relative humidity were 213(MS4),297(MB3)and 360 mS·cm^(-1)(MQ2),respectively.

New applications of poly(arylene ether)s in organic light-emitting diodes

Compared with conventional π-conjugated polymers,poly（arylene ether）s（PAEs） may take advantages of excellent thermal properties,well-defined effective conjugated length and no catalyst contamination.Recently,their applications have been extended from engineering plastics to optoelectronic materials.In this review,various kinds of functional PAEs used as fluorescent polymers,host polymers and phosphorescent polymers in organic light-emitting diodes（OLEDs） are outlined,and their molecular design,synthesis and device performance are overviewed.

Preparation of Anion Exchange Membrane Based on Imidazolium Functionalized Poly（arylene ether ketone）

The authors presented a novel synthetic route for the imidazolium functionalized poly（arylene ether ke- tone）s, derived from an engineering plastics polymer, a poly（arylene ether ketone） with 3,3＇,5,5＇- tetramethyl-4,4＇-dihydroxybiphenyl moiety（PAEK-TM）. The preparation of anion exchange membranes comprised converting benzylic methyl groups to bromomethyl groups by a radical reaction, followed by the functionalization of bromomethylated PAEK with alkyl imidazoles, i.e., methyl, butyl or vinyl imidazole. The structure of imidazolium functionalized PAEK was proved by 1H NMR spectra. A class of flexible and tough membranes was then achieved by subsequent film-forming and anion exchange processes. The water uptake and hydroxide conductivities of mem- branes are comparable or superior to those of quaternary ammonium（QA） anion exchange membranes. This work demonstrated a new route for non-QA anion exchange membrane design, avoiding the chloromethylation reagent and oreciselv controlling the degree and location of imidazolium grouos.

Anion Exchange Membranes Based on Chloromethylation of Fluorinated Poly（arylene ether）s

This report details the properties of fluorine-containing anion exchange membranes（AEMs） synthesized by chloromethylation and quaternization of fluorinated poly（arylene ether）s（FPAEs） based on decafluorobiphenyl and bisphenol A. Meanwhile, we compared their properties with those of their non-fluorinated counterparts, Udel-based AEMs. The reactivity of the chloromethylation of fluorinated poly（arylene ether）s was lowered by the strong elec- tron-withdrawing group, per-fluorinated biphenyl residue. Therefore higher temperature, more chloromethylation reagent, and longer reaction time were needed in the chloromethylation of FPAEs. Because of the hydrophobicity of fluorine, the swelling of FPAEs was depressed. In the FPAE-based AEMs, the water uptake of FPAE-1 membrane（F-1） was just 30%. There is a strong correlation between water uptake and conductivity for both Udel- and FPAE-based AEMs. Among all the membranes, the water uptake and the conductivity of FPAE-3 membrane（F-3） could reach up to 100% and 13.47 mS/cm respectively at 30 ℃. The mechanical properties of FPAE-based AEMs at room tempera- ture were worse than those of Udel-based ones because of the weak intermolecular interaction caused by the low po- larizability of fluorine. However, their high temperature mechanical properties are better, which can be explained in terms of low swelling.

Comb-shaped 2-Methylimidazolium Poly(arylene ether sulfone) Anion Exchange Membranes with High Alkaline Stability

A series of comb-shaped poly(arylene ether sulfone)s containing pendant 2-methyl-3-alkylimidazolitun group(ImPAES-Cx,x=1,6,10)was prepared and characterized as novel anion exchange membranes.These Im-PAES-Cx membranes were obtained by benzylic bromination and imidazolium functionalization.The characteristic nano-phase separation structure was formed in membranes with longer alkyl side chains,as confmned by small-angle X-ray scattering.The nano-phase separation structures endowed ImPAES-Cx membranes with improved ionic conductivity,dimensional stability(at least 60% decrease water uptake and swelling ratio at 60℃)and mechanical properties,together with excellent alkaline stability.Especially,ImPAES-C6 membranes possessed enhanced hydroxide conductivity and chemical stability simultaneously.These results suggest that it is a feasible strategy to introduce appropriate length of alkyl side chains into anion exchange membranes(AEMs)to improve the performance.

Poly(arylene ether nitrile)Dielectric Film Modified by Bi_(2)S_(3)/rGO-CN Fillers for High Temperature Resistant Electronics Fields

High-quality film capacitors are widely used in many fields such as new energy vehicles,electronic communications,etc.,due to their advantages in wide frequency response and low dielectric loss.The dielectric film is a crucial part of the film capacitor,and its properties have an important impact on the performance and use conditions of the film capacitor.In this work,a novel high-temperature-resistant dielectric film was prepared.Firstly,the Bi_(2)S_(3)/rGO-CN fillers were prepared by hydrothermal method combined with cyanation treatment,and then added to the poly(arylene ether nitrile)(PEN)matrix to prepare the dielectric film materials(PEN/Bi_(2)S_(3)/rGO-CN).After high temperature treatment,the fillers Bi_(2)S_(3)/rGO-CN reacted with the PEN matrix,and the composites materials transformed into a thermosetting hybrid film(PEN-Bi_(2)S_(3)/rGO)with gel content of 97.88%.The prepared hybrid dielectric films did not decompose significantly before 400℃,and showed a glass transition temperature(Tg)of up to 252.4℃,which could increase the effective use temperature of the materials.Compared with the composite films without heat treatment,they exhibit better mechanical properties,with further improvement in tensile strength and elastic modulus,and a decrease in elongation at break.The dielectric constant of the hybrid films can be up to 6.8 while the dielectric loss is only about 0.02 at 1 kHz.Moreover,the hybrid films showed excellent dielectric stability during temperature changes,and remain relatively stable before 250℃,which is suitable as a high-temperature-resistant high-dielectric material and is more advantageous for practical applications.

PES-COOH/3D-TFC纳滤膜的制备及性能研究

采用分子设计手段,将不同含量羧基基团引入亲水性羧化聚芳醚砜材料(PES-COOH)活性分离层以改善其亲水性,同时结合3D打印技术制备了具有低曲折度、微通孔结构且孔隙率可调的支撑层,开发出渗透、截留、抗污染性能均得到提升的PES-COOH/3D-TFC纳滤膜.通过红外光谱、扫描电镜、生物显微镜、水接触角测试和Zeta电位测试等方法测试了其物理化学性能,并探究了分离层羧基基团含量和支撑层微观结构对复合膜性能的影响.结果表明:当分离层羧基含量为60%、支撑层孔隙率为70%时,复合纳滤膜的水通量为4.4 L/(m^(2)·h)、硫酸钠截留率为78.1%,抗污染测试中通量衰减率和通量恢复率分别为23.8%和96.2%.

Highly stable side-chain-type cardo poly(aryl ether ketone)s membranes for vanadium flow battery

Vanadium flow batteries(VFBs)have drawn considerable attention as an emerging technology for largescale energy storage systems(ESSs).One of the pivotal challenges is the availability of eligible ion exchange membranes(ICMs)that provide high ion selectivity,proton conductivity,and stability under rigorous condition.Herein,a‘side-chain-type’strategy has been employed to fabricate highly stable phenolphthalein-based cardo poly(arylene ether ketone)s(PAEKs)membrane with low area resistance(0.058Ωcm^(2)),in which flexible alkyl spacers effectively alleviated inductive withdrawing effect from terminal ion exchange groups thus enabling a stable backbone.The assembled VFBs based on PAEKs bearing pendent alkyl chain terminated with quaternary ammonium(Q-PPhEK)demonstrated an energy efficiency above 80%over 700 cycles at 160 mA/cm^(2).Such a remarkable results revealed that the side-chain-type strategy contributed to enhancing the ICMs stability in strong oxidizing environment,meanwhile,more interesting backbones would be woken with this design engaging in stable ICMs for VFBs.

Sulfonated poly(aryl ether ketone sulfone)modified by polyoxometalates LaW_(10) clusters for proton exchange membranes with high proton conduction performance

Polyoxometalates(POMs)are classified as solid superacids which can exhibit notable proton conductivity,making them a promising functional inorganic filler for enhancing the proton conductivity of proton exchange membranes(PEMs).In this study,a series of hybrid membranes were obtained by molecular-level hybridization of Weakley-type POM Na_(7)H_(2)LaW_(10)O_(36)(LaW_(10))clusters into sulfonated poly(aryl ether ketone sulfone)(SPAEKS).All hybrid membranes exhibited greater proton conductivity than the pristine membrane in the 30–80℃temperature range.When the doping amount of LaW 10 reached 7 wt.%,the proton conductivity of M-LaW 10^(-7)achieved 64 mS·cm^(−1)at 80℃.Lanthanide ions'high coordination number property and variable coordination environment can aid to attract more water molecules from the environment.LaW 10 and these bound water can construct denser hydrogen bonds with–SO_(3)H of SPAEKS.These intensive hydrogen bonds will facilitate the constitution of more continuous proton transport channels,and improve the proton conductivity of the hybrid membrane.This work off ers a fresh approach to using POMs containing rare-earth components in PEMs.

Amine-functionalized metal organic framework@graphene oxide as filler in PAEK-containing carboxyl group membrane for ultrafiltration with ultra-high permeability and strong fouling resistance

Achieving high fouling resistance and permeability using membrane separation technology in water treatment processes remains a challenge.In this work,a novel mixed-matrix membrane(MMM)(poly(arylene ether ketone)[PAEK]-containing carboxyl groups[PAEK-COOH]/UiO-66-NH_(2)@graphene oxide[GO])with superb fouling resistance and high permeability was prepared by the nonsolvent-induced phase separation method,by in-situ growth of UiO-66-NH_(2) on the GO layer,and by preparing hydrophilic PAEK-COOH.On the basis of the structure and performance analysis of the MMM,the maximum water flux reached 591.25 L·m^(-2)·h^(-1) for PAEK-COOH/UiO-66-NH_(2)@GO,whereas the retention rate for bovine serum albumin increased from 85.40%to 94.87%.As the loading gradually increased,the hydrophilicity of the MMMs increased,significantly enhancing their fouling resistance.The strongest anti-fouling ability observed was 94.74%,which was 2.02 times greater than that of the pure membrane.At the same time,the MMMs contained internal amide and hydrogen bonds during the preparation process,forming a cross-linked structure,which further enhanced the mechanical strength and chemical stability.In summary,the MMMs with high retention rate,strong permeability,and anti-fouling ability were successfully prepared.

含二氮杂萘酮结构聚芳醚酮和聚芳醚砜研究进展

综述了含二氮杂萘酮结构的聚芳醚酮和聚芳醚砜的结构性能及其合成、改性、应用研究进展。

特种工程塑料──聚芳醚腈

本文介绍了特种工程塑料聚芳醚腈的合成、性能、成型及应用方面的研究，并讨论了合成中的化学反应及结构与性能的关系。

燃料电池质子交换膜用新型磺化聚芳醚酮的合成和性能表征

报道了一种新型磺化聚芳醚酮材料的合成方法,通过引入取代基对聚芳醚主链进行保护,用氯磺酸直接磺化方法在聚芳醚酮高分子侧基上引入磺酸功能基,实现了聚合物磺化结构的可控定位合成,得到了稳定性较好的磺化聚芳醚酮.通过核磁共振(NMR)、热重(TG)和凝胶渗透色谱(GPC)等分析方法对其结构及性能进行了表征.用溶液浇膜法制备了质子交换膜,考察了膜的各种性能,并与商用Nafion膜进行了比较,其导电性、热稳定性和吸水性远优于Nafion膜,抗氧化性、抗水解性和机械强度也达到了较高的指标.

3,3′-二磺化-4,4′-二氟二苯砜二钠盐的合成与表征

以工业级4,4′-二氟二苯砜(DFDPS)为原料,利用升华方法进行纯化处理后,采用发烟硫酸直接磺化,通过改变反应物计量比、反应温度、反应时间等参数,系统研究了3,3′-二磺化-4,4′-二氟二苯砜二钠盐(SDFDPS)的制备方法。采用HPLC、UV、1HNMR及FTIR对磺化产物结构及纯度进行了表征,由此得到最佳的磺化条件为:反应物摩尔比(SO3:DFDPS)为3.0:1,在110℃下反应20h。在此反应条件下的磺化产物中未发现单磺化产物以及未磺化的原料DFDPS。经过乙醇/水两次重结晶后,总收率达到75%。以合成的SDFDPS为原料合成了磺化度60%的磺化聚芳醚砜聚合物,该聚合物具有较高的相对黏度,同样也表明了SDFDPS的高纯度。