Analysis for Effects of Temperature Rise of PV Modules upon Driving Distance of Vehicle Integrated Photovoltaic Electric Vehicles

The development of vehicle integrated photovoltaics-powered electric vehicles (VIPV-EV) significantly reduces CO2 emissions from the transport sector to realize a decarbonized society. Although long-distance driving of VIPV-EV without electricity charging is expected in sunny regions, driving distance of VIPV-EV is affected by climate conditions such as solar irradiation and temperature rise of PV modules. In this paper, detailed analytical results for effects of climate conditions such as solar irradiation and temperature rise of PV modules upon driving distance of the VIPV-EV were presented by using test data for Toyota Prius and Nissan Van demonstration cars installed with high-efficiency InGaP/GaAs/InGaAs 3-junction solar cell modules with a module efficiency of more than 30%. The temperature rise of some PV modules studied in this study was shown to be expressed by some coefficients related to solar irradiation, wind speed and radiative cooling. The potential of VIPV-EV to be deployed in 10 major cities was also analyzed. Although sunshine cities such as Phoenix show the high reduction ratio of driving range with 17% due to temperature rise of VIPV modules, populous cities such as Tokyo show low reduction ratio of 9%. It was also shown in this paper that the difference between the driving distance of VIPV-EV driving in the morning and the afternoon is due to PV modules’ radiative cooling. In addition, the importance of heat dissipation of PV modules and the development of high-efficiency PV modules with better temperature coefficients was suggested in order to expand driving range of VIPV-EV. The effects of air-conditioner usage and partial shading in addition to the effects of temperature rise of VIPV modules were suggested as the other power losses of VIPV-EV.

Study on Image Recognition Algorithm for Residual Snow and Ice on Photovoltaic Modules

The accumulation of snow and ice on PV modules can have a detrimental impact on power generation,leading to reduced efficiency for prolonged periods.Thus,it becomes imperative to develop an intelligent system capable of accurately assessing the extent of snow and ice coverage on PV modules.To address this issue,the article proposes an innovative ice and snow recognition algorithm that effectively segments the ice and snow areas within the collected images.Furthermore,the algorithm incorporates an analysis of the morphological characteristics of ice and snow coverage on PV modules,allowing for the establishment of a residual ice and snow recognition process.This process utilizes both the external ellipse method and the pixel statistical method to refine the identification process.The effectiveness of the proposed algorithm is validated through extensive testing with isolated and continuous snow area pictures.The results demonstrate the algorithm’s accuracy and reliability in identifying and quantifying residual snow and ice on PV modules.In conclusion,this research presents a valuable method for accurately detecting and quantifying snow and ice coverage on PV modules.This breakthrough is of utmost significance for PV power plants,as it enables predictions of power generation efficiency and facilitates efficient PV maintenance during the challenging winter conditions characterized by snow and ice.By proactively managing snow and ice coverage,PV power plants can optimize energy production and minimize downtime,ensuring a sustainable and reliable renewable energy supply.

Synergetic optimization operation method for distribution network based on SOP and PV

The integration of distributed generation brings in new challenges for the operation of distribution networks,including out-of-limit voltage and power flow control.Soft open points(SOP)are new power electronic devices that can flexibly control active and reactive power flows.With the exception of active power output,photovoltaic(PV)devices can provide reactive power compensation through an inverter.Thus,a synergetic optimization operation method for SOP and PV in a distribution network is proposed.A synergetic optimization model was developed.The voltage deviation,network loss,and ratio of photovoltaic abandonment were selected as the objective functions.The PV model was improved by considering the three reactive power output modes of the PV inverter.Both the load fluctuation and loss of the SOP were considered.Three multi-objective optimization algorithms were used,and a compromise optimal solution was calculated.Case studies were conducted using an IEEE 33-node system.The simulation results indicated that the SOP and PVs complemented each other in terms of active power transmission and reactive power compensation.Synergetic optimization improves power control capability and flexibility,providing better power quality and PV consumption rate.

Performance Assessment of a Real PV System Connected to a Low-Voltage Grid

The generation of photovoltaic(PV)solar energy is increasing continuously because it is renewable,unlimited,and clean energy.In the past,generation systems depended on non-renewable sources such as oil,coal,and gas.Therefore,this paper assesses the performance of a 51 kW PV solar power plant connected to a low-voltage grid to feed an administrative building in the 6th of October City,Egypt.The performance analysis of the considered grid-connected PV system is carried out using power system simulator for Engineering(PSS/E)software.Where the PSS/E program,monitors and uses the power analyzer that displays the parameters and measures some parameters such as current,voltage,total power,power factor,frequency,and current and voltage harmonics,the used inverter from the type of grid inverter for the considered system.The results conclude that when the maximum solar radiation is reached,the maximum current can be obtained from the solar panels,thus obtaining the maximum power and power factor.Decreasing total voltage harmonic distortion,a current harmonic distortion within permissible limits using active harmonic distortion because this type is fast in processing up to 300 microseconds.The connection between solar stations and the national grid makes the system more efficient.

Electro-Optical Model of Soiling Effects on Photovoltaic Panels and Performance Implications

In this paper,a detailed model of a photovoltaic(PV)panel is used to study the accumulation of dust on solar panels.The presence of dust diminishes the incident light intensity penetrating the panel’s cover glass,as it increases the reflection of light by particles.This phenomenon,commonly known as the“soiling effect”,presents a significant challenge to PV systems on a global scale.Two basic models of the equivalent circuits of a solar cell can be found,namely the single-diode model and the two-diode models.The limitation of efficiency data in manufacturers’datasheets has encouraged us to develop an equivalent electrical model that is efficient under dust conditions,integrated with optical transmittance considerations to investigate the soiling effect.The proposed approach is based on the use of experimental current-voltage(I-V)characteristics with simulated data using MATLAB/Simulink.Our research outcomes underscores the feasibility of accurately quantifying the reduction in energy production resulting from soiling by assessing the optical transmittance of accumulated dust on the surface of PV glass.

Probabilistic Global Maximum Power Point Tracking Algorithm for Continuously Varying Partial Shading Conditions on Autonomous PV Systems

A photovoltaic (PV) string with multiple modules with bypass diodes frequently deployed on a variety of autonomous PV systems may present multiple power peaks under uneven shading. For optimal solar harvesting, there is a need for a control schema to force the PV string to operate at global maximum power point (GMPP). While a lot of tracking methods have been proposed in the literature, they are usually complex and do not fully take advantage of the available characteristics of the PV array. This work highlights how the voltage at operating point and the forward voltage of the bypass diode are considered to design a global maximum power point tracking (GMPPT) algorithm with a very limited global search phase called Fast GMPPT. This algorithm successfully tracks GMPP between 94% and 98% of the time under a theoretical evaluation. It is then compared against Perturb and Observe, Deterministic Particle Swarm Optimization, and Grey Wolf Optimization under a sequence of irradiance steps as well as a power-over-voltage characteristics profile that mimics the electrical characteristics of a PV string under varying partial shading conditions. Overall, the simulation with the sequence of irradiance steps shows that while Fast GMPPT does not have the best convergence time, it has an excellent convergence rate as well as causes the least amount of power loss during the global search phase. Experimental test under varying partial shading conditions shows that while the GMPPT proposal is simple and lightweight, it is very performant under a wide range of dynamically varying partial shading conditions and boasts the best energy efficiency (94.74%) out of the 4 tested algorithms.

太阳能光伏光热PV/T组件在建筑设计中的应用

建筑领域“双碳”目标的提出,使得降低建筑能耗成为目前亟需解决的问题。可再生能源同建筑领域的有机结合被认为是解决建筑能耗的重要环节。通过对太阳能光伏光热技术的发展进行总结,研究太阳能光伏光热技术在建筑领域中的设计方法,提出了对未来光伏光热建筑一体化的设计思考,为以后太阳能光伏光热PV/T技术产业的发展提供参考。

基于PVsyst的单面与双面光伏组件最佳安装倾角对比

随着光伏发电技术不断进步,单面光伏组件与双面光伏组件的价差不断缩小。得益于发电量增益大,双面光伏组件在实际项目中受到愈来愈多的青睐。当光伏发电项目采用单面或双面光伏组件时,光伏组件的最佳安装倾角成为一个重要的考虑因素。选取了3个太阳能资源等级地区,利用PVsyst对在这3个地区建设的光伏电站分别采用单面和双面光伏组件时的安装倾角与光伏电站首年发电量及光伏组件正面接收的太阳辐照量之间的关系进行了仿真模拟。得到以下结论:1)以光伏电站首年发电量最大为衡量标准时,双面光伏组件的最佳安装倾角大于或等于有阴影遮挡的单面光伏组件的最佳安装倾角,但小于无阴影遮挡的单面光伏组件的最佳安装倾角。2)就单面光伏组件而言,无阴影遮挡条件下增加光伏组件安装倾角带来的发电量增益高于有阴影遮挡安装条件时。3)在无阴影遮挡情况下,在一定范围内增大单面光伏组件的安装倾角可以相应提升其发电量;相对于双面光伏组件,无阴影遮挡的单面光伏组件通过适当提高其安装倾角所获得的发电量增益较小,且增大安装倾角,光伏阵列之间的间距也需要相应增加,这会增大用地量,从而增加项目总成本。因此,在实际项目中,尽可能采用双面光伏组件是一个较为理想的选择。

恶劣基建环境中BIPV光伏组件安装工艺的研究

面对泥泞地面和大型机械难以进入等复杂条件,恶劣的建设环境对BIPV(光伏建筑一体化)项目构成了巨大挑战。本文旨在探讨在这些特殊条件下的安装实施策略,研究了在恶劣地面条件下BIPV组件的安装过程,介绍了一种适用于泥泞和恶劣地面条件的光伏组件安装工具,总结了在恶劣建设环境下BIPV项目实施的项目实践,为在恶劣建设环境下进行BIPV项目建设提供参考和借鉴。

一种新型PV AC Module的研究

为了解决传统的两级式光伏交流模块PV AC module存在的结构复杂、成本高、效率低等问题,提出了一种新型PV AC module。该AC module的前级为传统的Boost变换器,完成光伏组件的最大功率点跟踪和光伏接口电压的泵升;后级采用高增益集成式逆变器,实现直流母线电压的泵升和并网发电功能。分析了PV AC module的系统结构,工作原理及控制策略,并通过一套250 W/40 kHz的样机仿真模型,验证了方案的可行性与理论分析的正确性。研究结果表明:该新型PV AC module具有结构简洁、控制简单、成本低、效率高等优点。

太阳能PV/T光储直驱热电联产系统性能

面对居民日益增长的生活热水和电能需求,光伏/光热(photovoltaic/thermal,PV/T)技术的应用可以降低建筑运行时的能源消耗。本文介绍了一种太阳能PV/T光储直驱热电联产(combined heat and power,CHP)系统,为了减少系统运行过程中的能量损失,采用直流压缩机和储能电池,并在兰州地区对系统的运行性能开展了实验测试。研究结果表明,PV/T系统的光伏板温度相比传统PV组件温度平均降低12.26℃,平均发电效率相对提升8.1%。在将24.4~27.2℃的水加热到50.1~50.7℃的过程中,平均性能系数(coefficient of performance,COP)可达到5.48,相比传统空气源热泵热水器提高82.1%~106.8%。平均集热效率和综合效率分别为37.30%和71.24%,PV/T系统的发电量和耗电量分别为3.33kWh和1.69kWh,发电量相比PV系统提高5.7%。太阳能PV/T光储直驱热电联产系统可以减少建筑部门的能源消耗,并提升PV/T系统的发电效率和综合效率,在晴天条件下可以实现离网运行。

积尘形态及密度对太阳能PV/T系统的性能影响研究

在室外搭建太阳能光伏/热(PV/T)系统实验测试平台,研究积尘形态及密度对系统性能的影响。研究结果表明:积尘形态主要影响太阳能PV/T系统的光热效率,积尘密度主要影响系统的光电效率。与松散积尘相比,粘结积尘对系统光热效率及综合效率的影响更大。当松散积尘密度从0变化至33.79 g/m^(2)时,系统的光热效率下降率仅为2.32%,而系统的光电效率下降率高达48.65%。在该文实验中,随着积尘密度的增大,太阳电池的工作温度依次为53.99、52.92、50.73和55.58℃,呈先降后增的变化趋势。故少量积尘不会使太阳能PV/T系统中太阳电池的工作温度升高而影响其正常工作。

Photovoltaic Cells and Modules towards Terawatt Era

Progresses in photovoltaic technologies over the past years are evident from the lower costs, the rising efficiency, to the great improvements in system reliability and yield. Cumulative installed power yearly growths were on an average more than 40% in the period from 2007 to 2016 and in 2016, the global cumulative photovoltaic power installed has reached 320 GWp. The level 0.5 TWp could be reached before 2020. The production processes in the solar industry still have great potential for optimization both wafer based and thin film technologies. Trends following from the present technology levels are discussed, also taking into account other parts of photovoltaic systems that influence the cost of electrical energy produced. Present developments in the three generations of photovoltaic modules are discussed along with the criteria for the selection of appropriate photovoltaic module manufacturing technologies. The wafer based crystalline silicon(csilicon) technologies have the role of workhorse of present photovoltaic power generation, representing more than 90% of total module production. Further technology improvements have to be implemented without significantly increasing costs per unit, despite the necessarily more complex manufacturing processes involved. The tandem of c-silicon and thin film cells is very promising. Durability may be a limiting factor of this technology due to the dependence of the produced electricity cost on the module service time.

Resiliency oriented control of a smart microgrid with photovoltaic modules

The resiliency of a standalone microgrid is of considerable issue because the available regulation measures and capabilities are limited.Given this background,this paper presented a new mathematical model for a detailed photovoltaic(PV)module and the application of new control techniques for efficient energy extraction.The PV module employs a single-stage conversion method to integrate it with the utility grid.For extraction the maximum power from PV and integrate it to power grid,a three-phase voltage source converter is used.For obtaining the maximum power at a particular irradiance a maximum power point tracking(MPPT)scheme is used.The fuzzy logic control and adaptive network-based fuzzy inference system are proposed for direct current(DC)link voltage control.The proposed model and control scheme are validated through a comparison with the standard power-voltage and current-voltage charts for a PV module.Simulation results demonstrate that the system stability can be maintained with the power grid and in the island mode,in contrast with the MPPT.

Efficiency of Photovoltaic Modules Using Different Cooling Methods: A Comparative Study

This paper presents an experimental investigation of the efficiency of a photovoltaic module using different cooling methods. The performance of the PV panels under different cooling techniques for the same operational conditions is explained. A special test rig was designed and installed in the Faculty of Engineering Technology, East Amman. All operating key variables such as solar radiation intensity, ambient and module temperatures using calibrated devices were measured and recorded as well as the electrical output. The present experiments results showed that the electrical efficiency of the tested PV panels is improved significantly when it was cooled. However, the best improvement obtained when a nanofluid (0.04% wt TiO2/water) is used as a cooling medium, while the PV panel cooled by using Aluminum rectangular fins showed the lowest efficiency improvement. Such results including the comparative analysis (under local operating conditions prevailing in Jordan) are in agreement with literature and could be useful for researchers and developers of solar power generation.

Moisture Absorption and Desorption in an Ionomer-Based Encapsulant:A Type of Self-Breathing Encapsulant for CIGS Thin-Film PV Modules

As an alternative to conventional encapsulation concepts for a double glass photovoltaic(PV)module,we introduce an innovative ionomer-based multi-layer encapsulant,by which the application of additional edge sealing to prevent moisture penetration is not required.The spontaneous moisture absorption and desorption of this encapsulant and its raw materials,poly(ethylene-co-acrylic acid)and an ionomer,are analyzed under different climatic conditions in this work.The relative air humidity is thermodynamically the driving force for these inverse processes and determines the corresponding equilibrium moisture content(EMC).Higher air humidity results in a larger EMC.The homogenization of the absorbed water molecules is a diffusion-controlled process,in which temperature plays a dominant role.Nevertheless,the diffusion coefficient at a higher temperature is still relatively low.Hence,under normal climatic conditions for the application of PV modules,we believe that the investigated ionomer-based encapsulant can“breathe”the humidity:During the day,when there is higher relative humidity,it“inhales”(absorbs)moisture and restrains it within the outer edge of the module;then at night,when there is a lower relative humidity,it“exhales”(desorbs)the moisture.In this way,the encapsulant protects the cell from moisture ingress.

A Study of the Temperature Influence on Different Parameters of Mono-Crystalline Silicon Photovoltaic Module

In this article, the effect of temperature on the photovoltaic parameters of mono-crystalline silicon Photovoltaic Panel is undertaken, using the Matlab environment with varying module temperature in the range 25°C - 60°C at constant solar irradiations 200 - 500 W/m2. The results show that the temperature has a significant impact on the various parameters of the photovoltaic panel and it controls the quality and performance of the solar panel. The photovoltaic parameters are the current of short circuit Isc, the open circuit voltage Vco, the form factor FF, the maximum power Pmax as well as efficiency. The relative change of these photovoltaic parameters with temperature is also evaluated in this article. A DS-100M solar panel has been used as reference model. The results show also that the open circuit voltage, maximum power, fill factor and efficiency decrease with temperature, but the short circuit current increases with temperature. The results are in good agreement with the available literature.

基于PVsyst的光伏系统研究

基于PVsyst软件,以吐鲁番地区某民居为模拟对象,对当地的气象数据进行分析,并构建了一套安装在屋顶的光伏并网发电系统。对光伏并网系统的安装倾角进行优化,并对光伏组件进行选型,对系统损失进行分析。最后根据模拟结果,对影响系统发电效率的因素进行分析并提出了一些优化方案,以及得出吐鲁番地区19.1 kW的光伏并网系统全年发电量为27.9 MW·h,系统效率为80.9%,能量回收期为2.98年,每年可减少32790 kg的CO_(2)排放量,具有一定的环境效益;若按新疆光伏上网电价0.262元(/kW·h)进行计算,每年还可带来7309.8元的收入。该研究对实际光伏并网系统的设计施工具有一定的参考意义。

Power Output Improvement of PV Module for Agricultural Use by Using Inexpensive Sunlight Concentrator

PV modules are used as stand alone power sources for agricultural equipments such as lifting pumps in farms, where the power infrastructure is not yet improved. In order to expand the agricultural use of PV module, the cost of PV generation should be reduced. In this paper, the power output performance of a commercial PV module was improved by using a sunlight concentrator that could be assembled inexpensively and a simple sun-tracking method.

Modeling of the Photovoltaic Module Operating Temperature for Various Weather Conditions in the Tropical Region

The operating temperature is a critical factor affecting the performances of photovoltaic(PV)modules.In this work,relevant models are proposed for the prediction of this operating temperature using data(ambient temperature and solar irradiance)based on real measurements conducted in the tropical region.For each weather condition(categorized according to irradiance and temperature levels),the temperatures of the PV modules obtained using the proposed approach is compared with the corresponding experimentally measured value.The results show that the proposed models have a smaller Root Mean Squared Error than other models developed in the literature for all weather conditions,which confirms the reliability of the proposed framework.