Functional Optical Fiber Sensors Detecting Imperceptible Physical/Chemical Changes for Smart Batteries

The battery technology progress has been a contradictory process in which performance improvement and hidden risks coexist.Now the battery is still a“black box”,thus requiring a deep understanding of its internal state.The battery should“sense its internal physical/chemical conditions”,which puts strict requirements on embedded sensing parts.This paper summarizes the application of advanced optical fiber sensors in lithium-ion batteries and energy storage technologies that may be mass deployed,focuses on the insights of advanced optical fiber sensors into the processes of one-dimensional nano-micro-level battery material structural phase transition,electrolyte degradation,electrode-electrolyte interface dynamics to three-dimensional macro-safety evolution.The paper contributes to understanding how to use optical fiber sensors to achieve“real”and“embedded”monitoring.Through the inherent advantages of the advanced optical fiber sensor,it helps clarify the battery internal state and reaction mechanism,aiding in the establishment of more detailed models.These advancements can promote the development of smart batteries,with significant importance lying in essentially promoting the improvement of system consistency.Furthermore,with the help of smart batteries in the future,the importance of consistency can be weakened or even eliminated.The application of advanced optical fiber sensors helps comprehensively improve the battery quality,reliability,and life.

GIS-Based Assessment of Soil Chemical and Physical Properties as a Basis for Land Reclamation in Toshka Area, Aswan, EGYPT

The accurate assessment of soil properties is a crucial factor for composing and implementing reclamation plans. The main objective of this study was to evaluate soil chemical and physical properties and calculate the chemical and fertility index for assisting land reclamation in Toshka area. The Toshka area is located between latitudes 31°32'N and 31°36'N and longitudes 32°40'E and 32°60'E. GIS was used to select 16 sites. The results revealed the soil has undesirable characteristics. The soil pH ranged from slightly alkaline to moderately alkaline. Furthermore, it was characterized as saline (with a ECe of 4.65 - 11.45 dS⋅m−1) and moderately calcareous soil (with CaCO3 at 11.85% - 17.20%). The soil had a low soil organic matter content which did not exceed 0.18%. The soil was dominated by a sandy loam texture (62.50%) followed by a sandy clay loam texture (18.75%). The bulk density, total soil porosity and saturated hydraulic conductivity values varied with 1.38 - 1.55 Mg⋅cm−3, 41.85% - 48.45% and 1.20 - 3.34 cm⋅h−1, respectively. The chemical index ranged from low to moderate quality. The correlations between the parameters osculated between negative and positive. Therefore, the soil may be reclaimed if the soil properties are improved and crop selection is optimized for this soil.

Assessment of the Variations in Soil Physicochemical Parameters of the Natural Forest and Plantations in Orumba North Local Government Area, Anambra State, Nigeria

Soil physicochemical parameters are the physical and chemical characteristics of soil such as pH, bulk density, organic carbon, nitrogen content, and nutrient levels at different soil depths. These parameters vary from one vegetation to the other and from one soil to the other. The study assessed the variations in soil physicochemical parameters of the natural forest and plantations in Agu Eke (Eke bush) in Etti village, Nanka and Umunnebo village, Ufuma both located in Orumba North Local Government Area, Anambra State. The experimental research design and stratified random sampling methods were used for the study and a total of 12 soil samples were collected at 30 cm depth from the selected locations of natural forest, cashew and palm plantations. The samples were analyzed using laboratory Varian AA240 Atomic Absorption Spectrophotometer, after which the result was subjected to statistical analysis—Analysis of Variance (ANOVA). The study found that there was no significant difference (variation) between the moisture contents of natural forests and the plantations;that is, the moisture contents were the same. It was also found that there was no significant variation between the bulk densities of the natural forest, oil plantation, and cashew plantation, meaning that the bulk densities were significantly the same. However, there were significant variations in nitrogen, potassium and phosphates, with p-values: sig = .000 < .05, sig = .010 < .05 and sig = .000 < .05, respectively. That is, the nitrogen and phosphate contents of the natural forest significantly vary more than those of the oil palm and cashew plantations, which probably means that by reducing natural forest to plantation, the nitrogen and phosphate contents of the natural forest reduced from what it used to be when the lands were mere forests. This shows that plantations do not have the same function of maintaining or improving soil quality as natural forests. The study recommended adopting a sustainable plantation agricultural system, such as using diverse nutrient sources (manure and compost), in order to maintain the desired soil quality.

Changing Rules of Physical and Chemical Properties of Eucalyptus uraphylla spp. Forest at Different Ages in Southwest Yunnan Province

[Objective] The aim was to study on changing rules of physical and chemical properties of Eucalyptus uraphylla spp. forest at different ages in Southwest of Yunnan Province. [Method] In the research, field survey and laboratory analysis were adopted to study on physical and chemical properties of soils for the Eucalyptus uraphylla spp. at the first cutting ages in Lancang County. [Result] With the increasing of forest ages, for physical properties of soils, soil bulk density was increasing, and soil structure became poor; water contents in soils and capillary porosity were improving, but total soil porosity and non-capillary porosity were decreasing. For chemical properties, pH of soil dropped, but soil acidity improved; organic matter, total N, hydrolysable nitrogen, available phosphorus, and available potassium all declined; exchangeable Ca and Mg were improving due to fertilization and Ca and Mg lower consumption. The results showed that plays important roles in water absorption of soils and vegetation growth were improved with age increase by Eucalyptus uraphylla spp. forest, but ventilation and fertility declined accordingly. [Conclusion] The research indicated that dry branches and fallen leaves should be preserved and nutrient cycling should be protected during introduction and management of Eucalyptus uraphylla spp. to guarantee the nutrients in dry branches and leaves are back to soils, providing theoretical references for management of forest plantation and environment protection.

Changing Rule of Physical and Chemical Indicators of Sediment in Tilapia Aquaculture Ponds

To provide basic information for studying balancing mechanism of nutrition environment in aquaculture ponds, sediment samples were collected periodically during the breeding process of tilapia in ponds. Then various types of nutrient content of the samples were detected and the changing rule was summarized. The results showed that dry weight of the sediment and content of TP, TN and TOC generally presented a trend of first increasing and then decreasing. The main production period of each nutrient was from July to September and the production percentage was close to 80% of the total production. The content of NH4^＋-N increased gradually and reached a peak in early August, then maintained at the peak level. NO2^--N content of the sediment in each pond was basically the same in the earlier aquaculture stage and decreased in middle stage with a big difference, then rose again in the later stage.

Soil Physical and Chemical Properties of Five Subtropical Forests in Lingao of Hainan

With 5 types of typical forests as research object, the physical and chemical properties of different types of forests were analyzed by sample plot investigation method. The results showed that： the soil total porosity was the highest in the Casuarina equisetifolia forest （46.168%）, but the lowest in the Encalyptus robusta forest （39.46%）. The soil capillary porosity was the highest in the Acacia mangium forest （22.57%）, but the lowest in the secondary forest （18.95%）. The soil water content was the highest in the C. equisetifolia forest, with a mean value of 27.85%, but the lowest in the secondary forest, with a mean value of 4.34%. The soil pH values were in the range of 4.81-6.59, the soils in the A. mangium forest, C. equisetifolia forest and E. robusta forest were strongly acidic （pH 4.5-5.5）, and the soils in the secondary forest and C. nucifera forest were weakly acidic. The soils had organic matter contents in the range of 0.34-28.68 g/kg, and showed an order of A. mangium forest〉C. equisetifolia forest〉E. robusta forest〉secondary forest〉C. nucifera forest, with a decreasing trend with the soil depth increasing. The soil total N contents were in the range of 0.10-1.63 g/kg, the A. mangium forest showed the highest soil total N contents, while the C. nucifera forest exhibited the lowest soil total N contents; the soil total P contents were in the range of 0.21-1.74 g/kg, and the E. robusta forest had the highest soil total P contents; and the soil total K contents were in the range of 0.16-2.15 g/kg, and the A. mangium forest exhibited the highest soil total K contents. The soil available P contents were in the range of 0.98-132.46 mg/kg; and the secondary forests had the highest soil available P contents; and the soil rapidly available K contents were in the range of 3.03-27.35 mg/kg, and the C. nucifera forest exhibited the highest soil rapidly available K contents. The soil ammonium N contents were in the range of 1.38-5.15 mg/kg, and the nitrate N contents were in the range were in the range of 0.56 -3.51 mg/kg. The A. mangium forest showed the highest soil nitrate N contents （with a mean value of 2.29 mg/kg） and ammonium N contents （with a mean value of 3.93 mg/kg）. For the same forest type, with the increase of soil depth, the nitrate nitrogen and ammonium nitrogen content also showed a decreasing trend.

Research on Physical and Chemical Properties of Corynebacterium glutamicum in Fermentation Process of the Glucose of Wheat Starch

[Objective] This study aimed to investigate the physical and chemical char- acteristic of Corynebacterium glutamicum in fermentation process of the glucose of wheat starch. [Method] The purity of glutamic acid in fermentation period, optical density and cell viability of bacteria were detected as indicators for regression com- parison and analysis. [Result] The relative error d=-3.316 6% within the experimental range of Warburg trace breathing apparatus and double function analyzer. The linear relationship was s1=（1-d）s2. During the fermentation process of the glucose of wheat starch, the average cell activity was 6.24 μA and the maximum cell activity was 6.61 μA. [Conclusion] Compared with optical density, cell viability can more accurate- ly reflect the physical and chemical properties of Corynebacterium glutamicum in fermentation process of the glucose of wheat starch. There was certain correlation between cell membrane phospholipids and cell viability.

Classification and Distribution of Common Aroma Components in Tobacco Leaf Based on Their Physical and Chemical Properties

[Objective] This study was aimed to find a new method for the classification of common aroma components in tobacco leaves. [Method] Sixty-four common aroma components in tobacco leaves were classified by cluster analysis based on their relative molecular weight. The contents and distribution of aroma components in another 71 C3F and 64 B2F tobacco leaf samples were analyzed by using the new method. [Result] The 64 common aroma components were divided into three categories trough the cluster analysis based on their molecular weight. CategoryⅠ consisted of 12 aroma components which had high molecular weight（281.308±21.536on average） and high boiling point（371.311±29.904 ℃ on average）. Category Ⅱ included 27 components which had low molecular weight（103.722 ± 13.115 on average） and low boiling point（176.132±42.342 ℃ on average）. Category Ⅲ included 25components which had middle molecular weight（175.393 ± 24.906 on average） and middle boiling point（250.562±45.431 ℃ on average）. The content of high-molecularweight aroma components in middle leaves（547.344±224.391 μg/g） was much higher than that in upper leaves（477.549±182.066 μg/g）. The content of low-molecularweight aroma component in middle leaves（17.468±3.459 μg/g） was also significantly higher than that in upper leaves（15.936±3.456 μg/g）. The content of middle-molecular-weight aroma component in middle leaves（44.931 ±8.953 μg/g） was extremely significantly higher than that in upper leaves（37.997±6.042 μg/g）. [Conclusion] This study proposed a new way to classify the aroma components in flue-cured tobacco leaves using the relative molecular weight as the index, which will provide theoretical reference for developing special tobacco leaves.

Effects of Green Manure Mixed Cropping Patterns on Physical and Chemical Properties of Soil and Economic Characters of Flue-cured Tobacco

[Objective] The aim was to clear the suitable green manure cropping pat- terns in Xiangxi tobacco-planting areas. [Method] 8 treatments were set to study the effects of the monoculture and mixed cropping of common vetch （Vicia gigantea Bge.）, perennial ryegrass （Lofium） and rapeseed （Brassica campestris L.） on physi- cal and chemical properties of soil and economic characters of flue-cured tobacco. [Result] （1） Green manure turnover can reduce soil bulk density by 1.08%-8.62%, and the effect of green manure mixed cropping pattern was the best. （2） Green manure turnover also can increase the soil nutrient, soil organic matter, total nitro- gen （N）, total phosphorus （P）, total potassium （K）, alkali-hydrolyzale N, rapidly available P and rapidly available K by 1.44%-6.10%, 0.01-0.12 g/kg, 1.89%- 11.32%, 0.12%-3.56%, 1.06%-11.76%, 0.04%-18.93% and 0.98%-23.12%, respec- tively, and the effect of the monoculture of common vetch was the best.（3） The overall change of soil pH was not obvious.（4）Green manure turnover can increase the yield and output of flue-cured tobacco, and the effect of the monoculture of common vetch was the best. [Conclusion] The monoculture of common vetch can be generalized in the dry land of Xiangxi tobacco-planting areas.

Effect of fire severity on physical and biochemical soil properties in Zagros oak(Quercus brantii Lindl.)forests in Iran

Fire affects the physical and chemical properties and soil biological activity of natural ecosystems. This study was conducted in the Miyan Tang region, Ilam Province in western Iran. The study site was 110 hectares, where we sampled soils in areas that were classified by fire severity： low （LS）, high （HS） and medium severity （MS）, and unburned （UB）, which served as the control. In each severity class, 25 transect points were randomly selected for measurement. Around each transect plot center, 3 soil samples were selected randomly and soils collected from the 0 to 20 cm depth were combined into a composite sample that was used in laboratory analysis to represent conditions at that point. Plots in the UB and LS fire classes had similar soil conditions and had higher values of factors such as saturated moisture, organic carbon, carbon dioxide, and silt and clay content. In contrast, plots in the HS and MS fire severity classes were clustered in the positive direction along the first axis that represented gradients in soil acidity, electrical conductivity, cation exchange capacity, accessible phosphorus, accessible potassium, bulk density, and sand. Soil attributes were similar in areas of HS and MS fire severity classes, whereas soil conditions in the LS class and UB controls were most similar. Fire in the LS areas either did not significantly alter the physicalchemical soil properties and microbial basal respiration, or soils were able to recover quickly after being burned.

Effects of Crude Oil Contamination on Soil Physical and Chemical Properties in Momoge Wetland of China

Large oilfields are often coincidentally located in major river deltas and wetlands,and potentially damage the structure,function and ecosystem service values of wetlands during oil exploration.In the present study,the effects of crude oil contamination during oil exploration on soil physical and chemical properties were investigated in marshes of the Momoge National Nature Reserve in Jilin Province,China.The concentrations of total petroleum hydrocarbons in the marsh soil near the oil wells are significantly higher than those in the adjacent control marsh.Soil water contents in oil-contaminated marshes are negatively correlated with soil temperature and are significantly lower than those in the control area,especially in fall.Crude oil contamination significantly increases the soil pH up to8.0,and reduces available phosphorus concentrations in the soil.The concentrations of total organic carbon are significantly different among sampling sites.Therefore,crude oil contamination could potentially alkalinize marsh soils,adversely affect soil fertility and physical properties,and cause deterioration of the marshes in the Momoge National Nature Reserve.Phyto-remediation by planting Calamagrostis angustifolia has the potential to simultaneously restore and remediate the petroleum hydrocarbon-contaminated wetlands.Crude oil contamination affects the soil physical and chemical properties,so developing an effective restoration program in the Momoge wetland is neccesary.

Calcium sulfate whisker prepared by flue gas desulfurization gypsum:A physical–chemical coupling production process

In this paper,the solid waste desulfurization gypsum produced by coal-fired power plants was used as a raw material to prepare calcium sulfate whiskers with high application prospects.Calcium sulfate whiskers with uniform morphology and high aspect ratio can be prepared by hydrothermal method in sulfuric acid solution.A new process of desulfurization gypsum activated by high-energy grinding to reduce the reaction temperature and sulfuric acid concentration was developed.Through the comparison of product morphology,the best grinding time was determined to be 3.5 h.The mechanism of desulfurization gypsum through physical–chemical coupling to reduce energy consumption was clarified.The activation of desulfurization gypsum by grinding and the acidic environment provided by the sulfuric acid solution made the calcium sulfate solution reached rapid saturation and accelerated the nucleation rate.By calculating the conversion and crystallization rate of calcium sulfate whiskers,it was found that there were obvious"autocatalytic"kinetic characteristics during the crystallization process.

Macroalgae in a spring stream in Shanxi Province:composition and relation to physical and chemical variables

Fourteen stream segments were investigated throughout the Xin’an Spring in Shanxi Province, China in 2004. The variation ranges in stream size, current velocity, discharge, dissolved oxygen, and specific conductance were large. Twenty-two macroalgae species were found in the stream. Major divisions in terms of species numbers were Chlorophyta (59.1%), Cyanophyta (22.8%), Xanthophyta (9.1%), Rhodophyta (4.5%) and Charophyta (4.5%). The most widespread species, Cladophora rivularis (50.0%), also Oedogonium sp. (42.9%) and Spirogyra sp. (42.9%) were well represented throughout the stream, whereas another 10 species were found in only one sampling site. Total percentage cover varied from <1% to 90%. Red algae Batrachospermum acuatum and the charophytes Chara vulgaris have the highest percentage cover. Among the parameters analyzed, the stream width, specific conductance and dissolved oxygen were the ones that more closely related to the species number and percentage cover of macroalgal communities. The species number of each site was negatively correlated with dissolved oxygen content. The total percentage cover of the macroalgae was negatively correlated with the stream width and the specific conductance.

Chemical and physical characteristics of quartz from gold deposits in the North China platform: relationship to gold mineralization

This paper seeks to identify macroscopic metallogenic mechanisms of various mineral deposits by studying microscopic typomorphic characteristics of typical minerals associated with the deposits and to reveal the mechanism of lattice gold in detail by studying both physical and chemical characteristics of quartz from representative gold deposits in the North China Platform.As part of their extensive research,the authors examine the relationship between trace elements with wall rock,the ore-forming media,and gold immigration of various types of gold deposits,including their salinity,type,temperature.These are key factors to revealing the mineralization mechanism,and indicators for mineral prospecting,exploration,mining,and metallurgical technology.In order to address the questions posed,the following methods were used:field investigations of geology and sampling of the representative gold deposits,physical study and chemical analysis of quartz including,but not limited to,fluid inclusions as well as their compositions and trace elements in quartz,the unit cell parameters,electron paramagnetic resonance spectrum(EPR),and infrared spectroscopic analysis(ISA).As a result of this study,the authors observe the following key findings:unit cell parameters of quartz vary with their contents of foreign elements including gold,paragenetic stage,wall rock type,and other factors;the higher the forming temperature and the lower the gold content in quartz,the smaller the unit cell parameters,and vice versa.Additionally,the EPR absorption lines resulted from the O–Al defect center.The density of these types of hole centers increases and the EPR signal strengthens when the temperature decreases.Based on the findings,the authors conclude that lattice gold exists in quartz.Gold,in the form of Au^(+)and/or Au^(3+),entering quartz and producing an electron–hole center,namely,the O-Au hole center,makes the center produce spin resonance absorption and results in the EPR absorption peak#I.Both unit cell parameters and EPR of quartz can potentially be used in mineral prospecting,relative ore-forming temperature determination,and grade control during mining.

Robinia pseudoacacia leaves improve soil physical and chemical properties

The role of the leaves of Robinia pseudoacacia L., which is widely distributed in the arid lands, on improving soil physical and chemical properties was analyzed at various incubation periods. The incubated soils added with 0, 25, 50 and 75 g Robinia pseudoacacia leaves were tested after consecutive incubation intervals of 6, 8 and 10 months and the different soil parameters were measured. The results showed the increases in organic matter (OM), extractable K, cation exchange capacity (CEC), aggregate stability and water holding capacity, but the decreases in pH value and bulk density after 6 months’ incubation. The gradual decrease in change rates of soil properties indicated less microbial population and organic residual mineralization under acidic conditions, which were resulted from fast decomposition of leaves after the first 6 months incubation. The increases in soil organic matter content, extractable K, CEC, aggregate stability and water holding capacity and the decreases in soil pH and bulk density provide favorable conditions for crop’s growth.

Effect of Garlic Straw on Physical and Chemical Characteristics of Continuous Cropping Soil and Root Activity of Tomato in Solar Greenhouse

Taking tomato ＂Kate two＂ as the experimental material, the effects of different dosage of garlic straw on physical and chemical characteristics of continuous cropping soil and root activity of tomato in solar greenhouse were studied. The results showed that after applying with garlic straw, maximal and minimal temperatures in 0-15 cm soil layers were directly proportional to the amount of returned garlic straw, which were 2.39 ℃ and 1℃ higher than that of the control respectively. The unit weight was decreasing upon the amount of applied garlic straws of soils in different depths, but the porosity of soil was increasing. For example, unit weight and porosity changed the most significantly in soils in the depths of 0-10 cm, which went down by 6.71% and 6.18%, respectively. Besides, garlic straw returning to field improved soil pH, reduced soil conductivity and soil acidification and relieved soil secondary salinization, especially in 0-20 cm soil layers. In addition to that, the application of garlic straw increased the root activity of tomato （max 31.45%）, and delayed root system senescence in late stage. Therefore, garlic straw returning could improve the physical and chemical characteristics of soil by succession planting and root activity of tomato in solar greenhouse.

Improvements of marine clay slurries using chemicale-physical combined method(CPCM)

In this paper, the effectiveness, applicability and validity of chemicalephysical combined methods（CPCMs） for treatment of marine clay （MC） slurries were evaluated. The method CPCM1 combineschemical stabilization and vacuum preloading （VP）, while CPCM2 is similar to CPCM1 but includes boththe application of surcharge and use of geo-bags to provide confinement during surcharge preloading.The key advantage of CPCM2 using geo-bags is that the surcharge can be immediately applied on thechemically stabilized slurries. Two types of geo-bags were investigated under simulated land filling anddyke conditions, respectively. The test results show that the shear strength （cu） of treated slurry byCPCM2 is generally much higher than that by CPCM1. Besides, the use of CPCM2 can significantly reducethe treatment time due to the short drainage paths created by geo-bags. Overall, CPCM2 allows fasterconsolidation and higher preloading that help to achieve higher mechanical properties of the stabilizedslurry. There are consistent relationships between cU and water content of slurries treated by CPCM2.Several important observations were also made based on comparisons of experimental data. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

Effects of Varieties and Cooking Methods on Physical and Chemical Characteristics of Cooked Rice

To analyze the effect of different lowland rice varieties and different cooking methods on physical and chemical characteristics of cooked rice. A factorial randomized block design with two factors was used and each combination of the factors was repeated three times. The first factor was rice variety（Ciherang and Ciliwung） and the second factor was the cooking method（stovetop, boiling and steaming, and rice cooker）. Results showed that Ciherang and Ciliwung varieties were classified into slender grain rice type with yellowred color. The amylose content of Ciherang was classified as moderate, while the amylose content of Ciliwung classified as low. The most abundant amino acid contained in Ciherang and Ciliwung varieties was glutamic acid. Statistical analysis showed that cooking method had significant effects on texture, lightness, chroma, hue and moisture content of cooked rice. Rice cooked with liwet method had the lowest texture value, lowest lightness value, highest chroma value, and highest moisture content.

Importance of Metal－Oxide Support Wettingandinteractions on Understanding of Physical and Chemical Behaviours of Supported Metal Catalysts

It has been generally recognised that the metal catalysts supported on oxide ceramic and non-oxide ceramic supports exhibit completely different characteristics as compared with the homogeneous ones. The na-ture of bonding and interactions occurring at the metal / ceramic interfaces are believed to be of importancefor the characteristics of such catalysts. The recently developed microscopic theory of adhesion and wettingin metal/ ceramic systems is briefly presented here with the emphasis on the ionocovalent oxide ceramics.and its consequence on the understanding of the physical and chemical behaviours of supported metal cata-lysts is exploited.

Selected physical and chemical properties of mechanically extracted neem seed oil sourced as a preservative for ligno-cellulose in south-western Nigeria

Most of the seeds produced by neem （Azadirachta indica A. Juss） trees in Nigeria are currently underutilized. Hence, relevant literature provides only limited information conceming many of the seed oils from this country, especially where it concems the potential applications of these oils as preservatives for ligno-cellulose against bio-deterioration. Using standard procedures therefore, this study was carried out to evaluate and document selected physical and chemical properties of neem seed oil （NSO）, mechanically extracted using a cold press at 31.03 N-mm^-2 pressure and a room temperature of 25 ± 2℃. The results show that oil yield was 38.42% with a specific gravity of 0.91 ± 0.01. The amount of acid was 18.24 ± 1.31 mg KOH.g^-1 and that of iodine 93.12 ± 2.01 g-100 g^- 1, while saponification and peroxide values were 172.88 ± 2.06 and 1.42 ± 0.04 mg·g^-1 respectively. The implication of the values obtained, particularly those for the chemical properties, as they concern the potential application of NSO as a preservative for ligno-eellulose, is likely that it may be useful in this regard since the values may support some of the documented anti-microbial properties of the oil, although other physical and chemical properties that may affect this potential are recommended for investigations. Conclusions and other recommendations follow in line with the results of the study.