Effects of galactooligosaccharide glycation on the functional properties of soy protein isolate and its application in noodles

Soybean protein has high nutritional value, but its functional properties are easily affected by external factors,which limits its application in food industry. In the study, soybean protein isolate(SPI) was modified by dry heat glycation of galactooligosaccharides(GOS). The gel properties, antioxidant properties and structural changes of SPI-GOS conjugates were investigated. The application of SPI-GOS conjugates in noodles was also explored. The results observed that the glycation degree of SPI increased with the increasing reaction time. SDS-PAGE and spectral analysis showed the changes of spatial conformation of SPI after glycation. The antioxidant activity of SPI increased after glycation and DPPH radical scavenging activity of SPI-GOS peaked at 48 h of reaction. The hardness, elasticity and resilience of soybean protein gel reached their relative maximum at 48 h, 48 h and 12 h of glycation reaction, respectively. Moreover, the appropriate addition of glycated SPI improved the quality of noodles. The noodles with 4% addition of SPI-GOS had higher hardness, elasticity and tensile properties. This study will provide an effective method to modify soybean protein and expand the use of soybean protein in food industry.

Effect of Exchange-Correlation Functional on the Structural, Mechanical, and Optoelectronic Properties of Orthorhombic RbSrBr3 Perovskite

In the present study, the effect of the exchange-correlation functional on the structural, mechanical, and optoelectronic properties of orthorhombic RbSrBr3 perovskite has been investigated using various functionals in Density Functional Theory (DFT) with the CASTEP code. The optimized lattice parameters are quite similar for all the functionals. The electronic properties have shown that RbSrBr3 perovskite is a wide direct band gap compound with a band gap energy ranging from 4.296 eV to 4.494 eV for all the functionals. The mechanical parameters like elastic constants, Young’s modulus, Shear modulus, Poisson’s ratio, Pugh’s ratio, and an anisotropic factor reveal that the RbSrBr3 perovskite has ductile behavior and an anisotropic nature which signifies the mechanical stability of the compound. The Debye temperature might withstand lattice vibration heat. High absorption coefficient (>104 cm−1), high optical conductivity, and very low reflectivity have been found in the RbSrBr3 perovskite for all functions. The computed findings on the RbSrBr3 perovskite suggested that the presented studied material is potentially applicable for photodetector and optoelectronic devices.

Application of Pomegranate Rind Extract for Improvement of Functional Properties of Various Materials—A Critical Review

Pomegranate rind is abundantly available as a waste material. Pomegranate Rind Extract (PRE) can be applied to cotton fabrics for its natural colours, as a mordanting agent and also for imparting certain functional properties such as fire retardancy and antimicrobial properties. This paper reviews the feasibility of Pomegranate Rind Extract to improve the functional properties of cellulosic fabrics. Studies show that varying concentrations and higher temperatures that were used to apply the extract on the fabric, resulted in enhanced functional properties. At a particular concentration, the treated fabric showed a 15 times lower burning rate in comparison with the control fabric. Also, antimicrobial efficacy has been observed against Gram-positive and Gram-negative bacteria. Due to the natural colouring material, it can be used as a natural dye on cotton material. The fire retardancy of pomegranate rind extract was tested on jute material under varying alkalinity. Research has indicated that pomegranate rind extract could be used to dye polyamide as well. The rubbing and wash fastness of the finished fabrics is good. The light fastness was fair, and its antibacterial efficiency against tested bacteria was good.

Design and additive manufacturing of bionic hybrid structure inspired by cuttlebone to achieve superior mechanical properties and shape memory function

Lightweight porous materials with high load-bearing,damage tolerance and energy absorption(EA)as well as intelligence of shape recovery after material deformation are beneficial and critical for many applications,e.g.aerospace,automobiles,electronics,etc.Cuttlebone produced in the cuttlefish has evolved vertical walls with the optimal corrugation gradient,enabling stress homogenization,significant load bearing,and damage tolerance to protect the organism from high external pressures in the deep sea.This work illustrated that the complex hybrid wave shape in cuttlebone walls,becoming more tortuous from bottom to top,creates a lightweight,load-bearing structure with progressive failure.By mimicking the cuttlebone,a novel bionic hybrid structure(BHS)was proposed,and as a comparison,a regular corrugated structure and a straight wall structure were designed.Three types of designed structures have been successfully manufactured by laser powder bed fusion(LPBF)with NiTi powder.The LPBF-processed BHS exhibited a total porosity of 0.042% and a good dimensional accuracy with a peak deviation of 17.4μm.Microstructural analysis indicated that the LPBF-processed BHS had a strong(001)crystallographic orientation and an average size of 9.85μm.Mechanical analysis revealed the LPBF-processed BHS could withstand over 25000 times its weight without significant deformation and had the highest specific EA value(5.32 J·g^(−1))due to the absence of stress concentration and progressive wall failure during compression.Cyclic compression testing showed that LPBF-processed BHS possessed superior viscoelastic and elasticity energy dissipation capacity.Importantly,the uniform reversible phase transition from martensite to austenite in the walls enables the structure to largely recover its pre-deformation shape when heated(over 99% recovery rate).These design strategies can serve as valuable references for the development of intelligent components that possess high mechanical efficiency and shape memory capabilities.

Changes of structure and functional properties of rice protein in the fresh edible rice during the seed development

It has been reported that fresh edible rice has more bioactive compounds and its protein is easier to digest and has lower hypoallergenic than mature rice. In this paper, the changes in structure and functional properties of proteins at five different stages, including early milky stage(EMS), middle milky stage(MMS), late milky stage(LMS), waxy ripe stage(WS)and ripening stage(RS), during the seed development were investigated. It was found that with the seed developing, the molecular weight of fresh rice protein gradually become larger while the secondary structure changed from the highest content of disordered structure at MMS to the highest content of ordered structure at RS, which affect the surface hydrophobicity and then the functional properties of proteins, including foaming properties, emulsifying properties and oil holding capacity. Fresh rice protein at MMS has the strongest surface hydrophobicity while fresh edible rice protein at RS has the strongest oil holding capability. The results of our study can provide a theoretical basis for the application of fresh rice protein in the food industry and help to develop new fresh edible rice food.

Leguminosae plants play a key role in affecting soil physical-chemical and biological properties during grassland succession after farmland abandonment in the Loess Plateau,China

Leguminosae are an important part of terrestrial ecosystems and play a key role in promoting soil nutrient cycling and improving soil properties.However,plant composition and species diversity change rapidly during the process of succession,the effect of leguminosae on soil physical-chemical and biological properties is still unclear.This study investigated the changes in the composition of plant community,vegetation characteristics,soil physical-chemical properties,and soil biological properties on five former farmlands in China,which had been abandoned for 0,5,10,18,and 30 a.Results showed that,with successional time,plant community developed from annual plants to perennial plants,the importance of Leguminosae and Asteraceae significantly increased and decreased,respectively,and the importance of grass increased and then decreased,having a maximum value after 5 a of abandonment.Plant diversity indices increased with successional time,and vegetation coverage and above-and below-ground biomass increased significantly with successional time after 5 a of abandonment.Compared with farmland,30 a of abandonment significantly increased soil nutrient content,but total and available phosphorus decreased with successional time.Changes in plant community composition and vegetation characteristics not only change soil properties and improve soil physical-chemical properties,but also regulate soil biological activity,thus affecting soil nutrient cycling.Among these,Leguminosae have the greatest influence on soil properties,and their importance values and community composition are significantly correlated with soil properties.Therefore,this research provides more scientific guidance for selecting plant species to stabilize soil ecosystem of farmland to grassland in the Loess Plateau,China.

Pectin fractions extracted sequentially from Cerasus humilis:Their compositions,structures,functional properties and antioxidant activities

Three pectin fractions(water-soluble fraction(WSF),chelator-soluble fraction(CSF),and sodium carbonatesoluble fraction(NSF))were obtained from Chinese dwarf cherry(Cerasus humilis)fruits.All of them were branched low methoxylated pectins with an amorphous or partially nanocrystalline nature and eight neutral monosaccharides(arabinose and galactose were most abundant).WSF,CSF and NSF had a degree of methylation(DM)of 35.82%,14.85%and 7.13%,uronic acid(UA)content of 76.02%,83.71%and 69.01%,and total protein content of 2.4%,2.1%and 8.8%,respectively.Their molecular weights were 340.31,330.16 and 141.31 kg/mol,respectively(analyzed by gel permeation chromatography(GPC)).WSF,CSF and NSF exhibited good rheological,thermal,emulsifying,emulsion-stabilizing,water-adsorbing,oil-binding,cholesterol-binding and antioxidant properties.NSF had the highest emulsifying,emulsion stabilizing,water-/oil-/cholesterol-binding and antioxidant capacities,followed by CSF.NSF had the highest viscosity(406.77 m Pa·s),flowability,and resistance to heat-induced changes/damage,which may be related to its lowest polydispersity index,DM and UA content and highest protein content.The three pectin fractions with desirable characteristics can be used as food additives/ingredients and dietary supplements.

Investigation of the structural, electronic and mechanical properties of CaO–SiO_(2) compound particles in steel based on density functional theory

CaO–SiO_(2)compounds compromise one of the most common series of oxide particles in liquid steels, which could significantly affect the service performance of the steels as crack initiation sites. However, the structural, electronic, and mechanical properties of the compounds in CaO–SiO_(2)system are still not fully clarified due to the difficulties in the experiments. In this study, a thorough investigation of these properties of CaO–SiO_(2)compound particles in steels was conducted based on first-principles density functional theory. Corresponding phases were determined by thermodynamic calculation, including gamma dicalcium silicate(γ-C2S), alpha-prime(L) dicalcium silicate(αL′-C2S), alpha-prime(H) dicalcium silicate(αH′-C2S), alpha dicalcium silicate(α-C2S), rankinite(C3S2), hatrurite(C3S), wollastonite(CS), and pseudowollastonite(Ps-CS). The results showed that the calculated crystal structures of the eight phases agree well with the experimental results. All the eight phases are stable according to the calculated formation energies, and γ-C2S is the most stable. O atom contributes the most to the reactivity of these phases. The Young’s modulus of the eight phases is in the range of 100.63–132.04 GPa. Poisson’s ratio is in the range of0.249–0.281. This study provided further understanding concerning the CaO–SiO_(2)compound particles in steels and fulfilled the corresponding property database, paving the way for inclusion engineering and design in terms of fracture-resistant steels.

Experimental Evaluation of Thermal Conductivity and Other Thermophysical Properties of Nanofluids Based on Functionalized (-OH) Mwcnt Nanoparticles Dispersed in Distilled Water

A possible way to increase thermal conductivity of working fluids, while keeping pressure drop at acceptable levels, is through nanofluids. Nanofluids are nano-sized particles dispersed in conventional working fluids. A great number of materials have potential to be used in nanoparticles production and then in nanofluids;one of them is Multi-Walled Carbon Nano Tubes (MWCNT). They have thermal conductivity around 3000 W/mK while other materials used as nanoparticles like CuO have thermal conductivity of 76.5 W/mK. Due to this fact, MWCNT nanoparticles have potential to be used in nanofluids production, aiming to increase heat transfer rate in energy systems. In this context, the main goal of this paper is to evaluate from the synthesis to the experimental measurement of thermal conductivity of nanofluid samples based on functionalized (-OH) MWCNT nanoparticles. They will be analyzed nanoparticles with different functionalization degrees (4% wt, 6% wt, and 9% wt). In addition, it will be quantified other thermophysical properties (dynamic viscosity, specific heat and specific mass) of the synthetized nanofluids. So, the present work can contribute with experimental data that will help researches in the study and development of MWCNT nanofluids. According to the results, the maximum increment obtained in thermal conductivity was 10.65% in relation to the base fluid (water).

Functional properties,antioxidant activity and in-vitro digestibility characteristics of brown and polished rice flours of Indian temperate region

The present investigation was aimed to study functional properties,antioxidant activity and in-vitro digestibility characteristics of brown and polished flours obtained from four rice cultivars(SR-4,K-39,Mushq Budij and Zhag)of Kashmir.Brown rice flours had higher total dietary fibre(3.08%-3.68%),oil absorption(116.0%-139.0%),emulsion capacity(4.78%-9.52%),emulsion stability(87.46%-99.93%)and resistant starch content(6.80%-9.00%)than polished flours.However,polished flours presented greater water absorption(102.0%-122.0%),foaming capacity(8.00%-13.63%),apparent amylose(19.16%-22.62%),peak(2260.0-2408.0 cP),trough(1372.0-1589.0 cP)and breakdown(714.0-978.0 cP)viscosities than their brown counterparts.Brown rice flours depicted highest total phenolic content(4.40-6.40 mg GAE/g)and inhibition of lipid peroxidation(19.50%-33.20%).However,equilibrium starch hydrolysis percentage(C∞)and predicted glycemic index of brown rice flours were lower than their polished counterparts.Among rice cultivars,brown Zhag flour had the highest total dietary fibre(3.68%),emulsion capacity(9.52%),emulsion stability(99.93%),resistant starch(9.00%),DPPH radical scavenging activity(85.45%)and inhibition of lipid peroxidation(33.20%),respectively.Emulsion capacity and emulsion stability were positively correlated with protein content of rice flours.However,peak,trough,breakdown and setback viscosities were negatively correlated with protein and fat contents of rice flour.The present investigation will be helpful in identifying nutritive role of rice flours from studied cultivars in human diet.

Effect of lipid peroxidation on the allergenicity and functional properties of soybeanβ-conglycinin(7S)and glycinin(11S)

This study aimed to analyze the effect of lipid peroxidation on the allergenicity and functional properties of soybeanβ-conglycinin(7 S)and glycinin(11 S).Oxidation complexes were determined using the lipid peroxidation method.Functional properties were analyzed based on emulsifying and foaming properties.The potential allergenicity was evaluated by in vitro and in vivo methods.The results found that oxidation altered structures of the proteins and resulted in the formation of cross-linked protein polymers.The emulsion and foaming properties of the proteins were improved after oxidation.The IgE-binding capacity of 7 S and11 S reduced after oxidation.KU812 cell assays showed that both histamine and IL-4 release decreased after oxidation treatment.A mouse model showed that oxidation reduced the IgE,IgG,and IgG1 levels,as well as reduced histamine and mMCP-1 release in serum,which might suppress the allergic reaction.In conclusion,the lipid peroxidation treatment likely causes changes to the functional properties of soybean,decreasing the potential allergenicity of 7 S and 11 S.

Density functional theory study of influence of impurity on electronic properties and reactivity of pyrite

The electronic property of pyrite supercell containing As,Se,Te,Co or Ni hetero atoms were calculated using density functional theory（DFT）,and the reactivities of pyrite with oxygen and xanthate were discussed by frontier orbital methods.The cell volume expands due to the presence of impurity.Co and Ni mainly affect the bands near Fermi levels,while As mainly affects the shallow and deep valence bands,and Se and Te mainly affect the deep valence bands.Electronic density analysis suggests that there exists a strong covalent interaction between hetero atom and its surrounding atoms.By frontier orbital calculation,it is suggested that As,Co and Ni have greater influence on the HOMO and LUMO of pyrite than Se and Te.In addition,pyrite containing As,Co or Ni is easier to oxidize by oxygen than pyrite containing Se or Te,and pyrite containing Co or Ni has greater interaction with collector.These are in agreement with the observed pyrite practice.

High-throughput calculations combining machine learning to investigate the corrosion properties of binary Mg alloys

Magnesium(Mg)alloys have shown great prospects as both structural and biomedical materials,while poor corrosion resistance limits their further application.In this work,to avoid the time-consuming and laborious experiment trial,a high-throughput computational strategy based on first-principles calculations is designed for screening corrosion-resistant binary Mg alloy with intermetallics,from both the thermodynamic and kinetic perspectives.The stable binary Mg intermetallics with low equilibrium potential difference with respect to the Mg matrix are firstly identified.Then,the hydrogen adsorption energies on the surfaces of these Mg intermetallics are calculated,and the corrosion exchange current density is further calculated by a hydrogen evolution reaction(HER)kinetic model.Several intermetallics,e.g.Y_(3)Mg,Y_(2)Mg and La_(5)Mg,are identified to be promising intermetallics which might effectively hinder the cathodic HER.Furthermore,machine learning(ML)models are developed to predict Mg intermetallics with proper hydrogen adsorption energy employing work function(W_(f))and weighted first ionization energy(WFIE).The generalization of the ML models is tested on five new binary Mg intermetallics with the average root mean square error(RMSE)of 0.11 eV.This study not only predicts some promising binary Mg intermetallics which may suppress the galvanic corrosion,but also provides a high-throughput screening strategy and ML models for the design of corrosion-resistant alloy,which can be extended to ternary Mg alloys or other alloy systems.

Density Functional Theory Study on Electronic and Magnetic Properties of Mn-doped （MgO）n （n=2-10） Clusters

We study the geometries, stabilities, electronic and magnetic properties of （MgO）n （n=2-10） clusters doped with a single Mn atom using the density functional theory with the gener- alized gradient approximation. The optimized geometries show that the impurity Mn atom prefers to replace the Mg atom which has low coordination number in all the lowest-energy MnMgn-1On （n=2-10） structures. The stability analysis clearly represents that the average binding energies of the doped clusters are larger than those of the corresponding pure （MgO）n clusters. Maximum peaks of the second order energy differences are observed for MnMg~_1On clusters at n=6, 9, implying that these clusters exhibit higher stability than their neighboring clusters. In addition, all the Mn-doped Mg clusters exhibit high total magnetic moments with the exception of MnMgO2 which has 3.00μB. Their magnetic behavior is attributed to the impurity Mn atom, the charge transfer modes, and the size of MnMgn- 1On clusters.

Disparities in tree mortality among plant functional types(PFTs)in a temperate forest:Insights into size-dependent and PFT-specific patterns

Tree mortality significantly influences forest structure and function,yet our understanding of its dynamic patterns among a range of tree sizes and among different plant functional types(PFTs)remains incomplete.This study analysed size-dependent tree mortality in a temperate forest,encompassing 46 tree species and 32,565 individuals across different PFTs(i.e.,evergreen conifer vs.deciduous broadleaf species,shade-tolerant vs.shade-intolerant species).By employing all-subset regression procedures and logistic generalized linear mixed-effects models,we identified distinct mortality patterns influenced by biotic and abiotic factors.Our results showed a stable mortality patte rn in eve rgreen conifer species,contrasted by a declining pattern in deciduous broadleaf and shadetolerant,as well as shade-intolerant species,across size classes.The contribution to tree mortality of evergreen conifer species shifted from abiotic to biotic factors with increasing size,while the mortality of deciduous broadleaf species was mainly influenced by biotic factors,such as initial diameter at breast height(DBH)and conspecific negative density.For shade-tolerant species,the mortality of small individuals was mainly determined by initial DBH and conspecific negative density dependence,whereas the mortality of large individuals was subjected to the combined effect of biotic(competition from neighbours)and abiotic factors(i.e.,convexity and pH).As for shade-intolerant species,competition from neighbours was found to be the main driver of tree mortality throughout their growth stages.Thus,these insights enhance our understanding of forest dynamics by revealing the size-dependent and PFT-specific tree mortality patterns,which may inform strategies for maintaining forest diversity and resilience in temperate forest ecosystems.

Structure,electronic,and nonlinear optical properties of superalkaline M_(3)O(M=Li,Na)doped cyclo[18]carbon

Cyclo[18]carbon has received considerable attention thanks to its novel geometric configuration and special electronic structure.Superalkalis have low ionization energy.Doping a superalkali in cyclo[18]carbon is an effective method to improve the optical properties of the system because considerable electron transfer occurs.In this paper,the geometry,bonding properties,electronic structure,absorption spectrum,and nonlinear optical(NLO)properties of superalkaline M_(3)O(M=Li,Na)-doped cyclo[18]carbon were studied by using density functional theory.M_(3)O and the C_(18) rings are not coplanar.The C_(18) ring still exhibits alternating long and short bonds.The charge transfer between M_(3)O and C_(18) forms stable[M_(3)O]+[C_(18)]-ionic complexes.C_(18)M_(3)O(M=Li,Na)shows striking optical nonlinearity,i.e.,their first-and second-order hyperpolarizability(βvec andγ||)increase considerably atλ=1907 nm and 1460 nm.

Wave propagation of a functionally graded plate via integral variables with a hyperbolic arcsine function

Several studies on functionally graded materials(FGMs)have been done by researchers,but few studies have dealt with the impact of the modification of the properties of materials with regard to the functional propagation of the waves in plates.This work aims to explore the effects of changing compositional characteristics and the volume fraction of the constituent of plate materials regarding the wave propagation response of thick plates of FGM.This model is based on a higher-order theory and a new displacement field with four unknowns that introduce indeterminate integral variables with a hyperbolic arcsine function.The FGM plate is assumed to consist of a mixture of metal and ceramic,and its properties change depending on the power functions of the thickness of the plate,such as linear,quadratic,cubic,and inverse quadratic.By utilizing Hamilton’s principle,general formulae of the wave propagation were obtained to establish wave modes and phase velocity curves of the wave propagation in a functionally graded plate,including the effects of changing compositional characteristics of materials.

Molecular simulation study of the microstructures and properties of pyridinium ionic liquid[HPy][BF_(4)]mixed with acetonitrile

The microstructures and thermodynamic properties of mixed systems comprising pyridinium ionic liquid[HPy][BF_(4)]and acetonitrile at different mole fractions were studied using molecular dynamics simulation in this work.The following properties were determined:density,self-diffusion coefficient,excess molar volume,and radial distribution function.The results show that with an increase in the mole fraction of[HPy][BF_(4)],the self-diffusion coefficient decreases.Additionally,the excess molar volume initially decreases,reaches a minimum,and then increases.The rules of radial distribution functions(RDFs)of characteristic atoms are different.With increasing the mole fraction of[HPy][BF_(4)],the first peak of the RDFs of HA1-F decreases,while that of CT6-CT6 rises at first and then decreases.This indicates that the solvent molecules affect the polar and non-polar regions of[HPy][BF_(4)]differently.

Structural, Electronic and Optical Properties of ScxAl1-xN alloys within DFT Calculations

Structural, electronic and optical properties of Sc-based aluminum-nitride alloy have been carried out with first-principles methods using both local density approximation (LDA) and Heyd-Scuseria-Ernzerhof (HSE) hybrid functional. This latter provides a more accurate description of the lattice parameters, enthalpy of formation, electronic and optical properties of our alloy than standard DFT. We found the transition from wurtzite to rocksalt structures at 61% of Sc concentration. By increasing the scandium concentration, the lattice parameters and the band gap decrease. The HSE band gap is in good agreement with available experimental data. The existence of the strong hybridization between Sc 3d and N 2p indicates the transport of electrons from Sc to N atoms. Besides, it is shown that the insertion of the Sc atom leads to the redshift of the optical absorption edge. The optical absorption of ScxAl1-xN is found to decrease with increasing Sc concentrations in the low energy range. Because of this, ScxAl1-xN have a great potential for applications in photovoltaics and photocatalysis.

GGA + U Study of the Optical Properties of α-BeH2

The optical properties of α-BeH2 in an Orthorhombic crystal structure with the space group (Ibam) are investigated. We have calculated the optical properties including dielelectric function, refractive index and extinction coefficient, using density functional approach. A theoretical explanation of the relationship between the dielectric function and other optical constants has been provided. Furthermore, the real and imaginary components of the dielectric function have been examined. The effects of the exchange-correlation potentials (GGA and GGA + U) applied on this compound’s absorption peaks and edges have also been investigated. It was found that using the GGA + U approximation caused the conduction band to shift, which in turn caused the initial absorption peak to shift.