Second-order difference scheme for a nonlinear model of wood drying process

A numerical simulation for a model of wood drying process is considered. The model is given by a couple of nonlinear differential equations. One is a nonlinear parabolic equation and the other one is a nonlinear ordinary equation. A difference scheme is derived by the method of reduction of order. First, a new variable is introduced and the original problem is rewritten into a system of the first-order differential equations. Secondly, a difference scheme is constructed for the later problem. The solvability, stability and convergence of the difference scheme are proved by the energy method. The convergence order of the difference scheme is secondorder both in time and in space. A prior error estimate is put forward. The new variable is put aside to reduce the computational cost. A numerical example testifies the theoretical result.

PREPARATION AND SECOND-ORDER OPTICAL NONLINEARITY OF NOVEL PHENOXYSILICON NETWORKS BY SOL-GEL PROCESS

Four phenoxysilicon networks for nonlinear optical (NLO) applications were designed and prepared by an extended sol-gel process without additional H2O and catalyst. All poled polymer network films possess high second-order nonlinear optical coefficients (d(33)) Of 10(-7)similar to 10(-8) esu. The investigation of NLO temporal stability at room temperature and elevated temperature (120 degreesC) indicated that these films exhibit high d(33) stability because the orientation of the chromophores are locked in the phenoxysilicon organic/inorganic networks.

Necessary Conditions for the Application of Moving Average Process of Order Three

Invertibility is one of the desirable properties of moving average processes. This study derives consequences of the invertibility condition on the parameters of a moving average process of order three. The study also establishes the intervals for the first three autocorrelation coefficients of the moving average process of order three for the purpose of distinguishing between the process and any other process (linear or nonlinear) with similar autocorrelation structure. For an invertible moving average process of order three, the intervals obtained are , -0.5ρ2ρ1<0.5.

Design of Smith Predictor Based Fractional Controller for Higher Order Time Delay Process

Normally all real world process in a process industry will have time delay.For those processes with time delays,obtaining satisfactory closed loop performances becomes very difficult.In this work,three interacting cylindrical tank process is considered for study and the objective of the work is to compensate for time delays using smith predictor structure and to maintain the level in the third tank.Input/Output data is generated for the three interacting tank process.It is approximated as Integer First Order Plus Dead Time system(IFOPDT)and Fractional First Order Plus Dead Time system(FFOPDT).Smith predictor based fractional order Proportional Integral controller and Integer order Proportional Integral controller is designed for the IFOPDT and FFOPDT model using frequency response technique and their closed loop performance indices are compared and tabulated.The servo and regulatory responses are simulated using Matlab/Simulink.

Fault detection of large-scale process control system with higher-order statistical and interpretative structural model

Nonlinear characteristic fault detection and diagnosis method based on higher-order statistical(HOS) is an effective data-driven method, but the calculation costs much for a large-scale process control system. An HOS-ISM fault diagnosis framework combining interpretative structural model(ISM) and HOS is proposed:(1) the adjacency matrix is determined by partial correlation coefficient;(2) the modified adjacency matrix is defined by directed graph with prior knowledge of process piping and instrument diagram;(3) interpretative structural for large-scale process control system is built by this ISM method; and(4) non-Gaussianity index, nonlinearity index, and total nonlinearity index are calculated dynamically based on interpretative structural to effectively eliminate uncertainty of the nonlinear characteristic diagnostic method with reasonable sampling period and data window. The proposed HOS-ISM fault diagnosis framework is verified by the Tennessee Eastman process and presents improvement for highly non-linear characteristic for selected fault cases.

Adaptive Consistent Parameter Estimation for Non－Gaussian MA Processes Using 4th Order Cumulant

This paper addresses the problem of adaptively estimating the consistent parameters for non Gaussian nonminimum MA processes with symmetric PDF using the fourth order cumulant of the underlying processes. The processes may be corrupted by additive noise.

Quality oriented multimode processes monitoring based on a novel hierarchical common and specific structure with different order information

Due to higher demands on product diversity,flexible shift between productions of different products in one equipment becomes a popular solution,resulting in existence of multiple operation modes in a single process.In order to handle such multi-mode process,a novel double-layer structure is proposed and the original data are decomposed into common and specific characteristics according to the relationship between variables among each mode.In addition,both low and high order information are considered in each layer.The common and specific information within each mode can be captured and separated into several subspaces according to the different order information.The performance of the proposed method is further validated through a numerical example and the Tennessee Eastman(TE)benchmark.Compared with previous methods,superiority of the proposed method is validated by the better monitoring results.

Computer Data Processing of the Hydrogen Peroxide Decomposition Reaction

Two methods of computer data processing, linear fitting and nonlinear fitting, are applied to compute the rate constant for hydrogen peroxide decomposition reaction. The results indicate that not only the new methods work with no necessity to measure the final oxygen volume, but also the fitting errors decrease evidently.

CONDITIONS FOR FOURTH-ORDER STATIONARITY AND ERGODICITY OF A HARMONIC RANDOM PROCESS

The finite data estimates of the complex fourth-order moments of a signal consisting of random harmonics are analyzed. Conditions for the fourth-order stationarity and ergodicity are obtained. Explicit formulas for the estimation error and its variance, as well as their limiting large sample values are derived. Finally, a special case relevant to cubic phase coupling is considered, and these results are stated for this case, the variance is shown to comprise an ergodic and a nonergodic part.

Higher-Order Statistics and Nonlinear Processes in Space Plasmas

Statistics of order 2 (variance, auto and cross-correlation functions, auto and cross-power spectra) and 3 (skewness, auto and cross-bicorrelation functions, auto and cross-bispectra) are used to analyze the wave-particle interaction in space plasmas. The signals considered here are medium scale electron density irregularities and ELF/ULF electrostatic turbulence. Nonlinearities are mainly observed in the ELF range. They are independently pointed out in time series associated with fluctuations in electronic density and in time series associated with the measurement of one electric field component. Peaks in cross-bicorrelation function and in mutual information clearly show that, in well delimited frequency bands, the wave-particle interactions are nonlinear above a certain level of fluctuations. The way the energy is transferred within the frequencies of density fluctuations is indicated by a bi-spectra analysis.

RESEARCH OF VOXELIZATION PROCESS IN SWEPT-VOLUME TECHNIQUE

Now the image display techniques have made great progress. The planar display and a fully new true 3-D volumetric display technique are rapidly researched and come into the application. A method based on the voxel makes the observer able to get a true 3-D effect freely without any additional facilities. This paper introduces the basic form of the swept-volume display technique and discusses its voxelization process. By the translational motion prototype, this paper emphasizes how to get the voxel mapping matrix. The translated image data are the data of the beam source deflections. Finally the voxel ordering and the optimizing are also discussed.

Adaptive broadband beamformer for nonuniform linear array based on second order cone programming

Adaptive broadband beamforraing is a key issue in array applications. The adaptive broadband beamformer with tapped delay line （TDL） structure for nonuniform linear array （NLA） is designed according to the rule of minimizing the beamformer＇s output power while keeping the distortionless response （DR） in the direction of desired signal and keeping the constant beamwidth （CB） with the prescribed sidelobe level over the whole operating band. This kind of beamforming problem can be solved with the interior-point method after being converted to the form of standard second order cone programming （SOCP）. The computer simulations are presented which illustrate the effectiveness of our beamformer.

Bayesian Reliability——Growth Analysis for Statistical of Diverse Population Based on Non-homogeneous Poisson Process

New armament systems are subjected to the method for dealing with multi-stage system reliability-growth statistical problems of diverse population in order to improve reliability before starting mass production. Aiming at the test process which is high expense and small sample-size in the development of complex system, the specific methods are studied on how to process the statistical information of Bayesian reliability growth regarding diverse populations. Firstly, according to the characteristics of reliability growth during product development, the Bayesian method is used to integrate the testing information of multi-stage and the order relations of distribution parameters. And then a Gamma-Beta prior distribution is proposed based on non-homogeneous Poisson process（NHPP） corresponding to the reliability growth process. The posterior distribution of reliability parameters is obtained regarding different stages of product, and the reliability parameters are evaluated based on the posterior distribution. Finally, Bayesian approach proposed in this paper for multi-stage reliability growth test is applied to the test process which is small sample-size in the astronautics filed. The results of a numerical example show that the presented model can make use of the diverse information synthetically, and pave the way for the application of the Bayesian model for multi-stage reliability growth test evaluation with small sample-size. The method is useful for evaluating multi-stage system reliability and making reliability growth plan rationally.

Bayesian estimation of a power law process with incomplete data

Due to the simplicity and flexibility of the power law process,it is widely used to model the failures of repairable systems.Although statistical inference on the parameters of the power law process has been well developed,numerous studies largely depend on complete failure data.A few methods on incomplete data are reported to process such data,but they are limited to their specific cases,especially to that where missing data occur at the early stage of the failures.No framework to handle generic scenarios is available.To overcome this problem,from the point of view of order statistics,the statistical inference of the power law process with incomplete data is established in this paper.The theoretical derivation is carried out and the case studies demonstrate and verify the proposed method.Order statistics offer an alternative to the statistical inference of the power law process with incomplete data as they can reformulate current studies on the left censored failure data and interval censored data in a unified framework.The results show that the proposed method has more flexibility and more applicability.

Joint optimization of inspection-based and age-based preventive maintenance and spare ordering policies for single-unit systems

This paper presents a joint optimization policy of preventive maintenance(PM)and spare ordering for single-unit systems,which deteriorate subject to the delay-time concept with three deterioration stages.PM activities that combine a non-periodic inspection scheme with age-replacement are implemented.When the system is detected to be in the minor defective stage by an inspection for the first time,place an order and shorten the inspection interval.If the system has deteriorated to a severe defective stage,it is either repaired imperfectly or replaced by a new spare.However,an immediate replacement is required once the system fails,the maximal number of imperfect maintenance(IPM)is satisfied or its age reaches to a pre-specified threshold.In consideration of the spare’s availability as needed,there are three types of decisions,i.e.,an immediate or a delayed replacement by a regular ordered spare,an immediate replacement by an expedited ordered spare with a relative higher cost.Then,some mutually independent and exclusive renewal events at the end of a renewal cycle are discussed,and the optimization model of such a joint policy is further developed by minimizing the long-run expected cost rate to find the optimal inspection and age-replacement intervals,and the maximum number of IPM.A Monte-Carlo based integration method is also designed to solve the proposed model.Finally,a numerical example is given to illustrate the proposed joint optimization policy and the performance of the Monte-Carlo based integration method.

Joint optimization of inspection, maintenance, and spare ordering policy considering defective products loss

This paper proposes a joint inspection-based maintenance and spare ordering optimization policy that considers the problem of integrated inspection,preventive maintenance,spare ordering,and quality control for a four-state single-unit manufacturing system.When an inspection detects a minor defect,a second phase inspection is initiated and a regular order is placed.Product quality begins to deteriorate when the system undergoes a severe defect.To counter this,an advanced replacement of the minor defective system is carried out at the Jth second phase inspection.If a severe defect is recognized prior to the Jth inspection,or if system failure occurs,preventive or corrective replacement is executed.The timeliness of replacement depends on the availability of spare.We adopt two modes of ordering:a regular order and an emergency order.Meanwhile,a threshold level is introduced to determine whether an emergency order is preferred even when the regular order is already ordered but has not yet arrived.The optimal joint inspection-based maintenance and spare ordering policy is formulated by minimizing the expected cost per unit time.A simulation algorithm is proposed to obtain the optimal two-phase inspection interval,threshold level and advanced replacement interval.Results from several numerical examples demonstrate that,in terms of the expected cost per unit time,our proposed model is superior to some existing models.

Active disturbance rejection control on first-order plant

Conventional PI control encounters some problems when dealing with large lag process in the presence of parameter uncertainties.For the typical first-order process,an observerbased linear active disturbance rejection control（LADRC） scheme is presented to cope with the difficulties,and a reduced-order observer scheme is proposed further.Some quantitative dynamic results with regard to non-overshoot characteristics are obtained.Finally,the performance boundaries of LADRC and PI control are explicitly compared with each other,which shows that the former is more superior in most cases.

A novel approach to topological defects in a vector order parameter system

Based on Duan＇s topological current theory,we propose a novel approach to study the topological properties of topological defects in a two-dimensional complex vector order parameter system.This method shows explicitly the fine topological structure of defects.The branch processes of defects in the vector order parameter system have also been investigated with this method.

An interconnecting bus power optimization method combining interconnect wire spacing with wire ordering

On-chip interconnect buses consume tens of percents of dynamic power in a nanometer scale integrated circuit and they will consume more power with the rapid scaling down of technology size and continuously rising clock frequency, therefore it is meaningful to lower the interconnecting bus power in design. In this paper, a simple yet accurate interconnect parasitic capacitance model is presented first and then, based on this model, a novel interconnecting bus optimization method is proposed. Wire spacing is a process for spacing wires for minimum dynamic power, while wire ordering is a process that searches for wire orders that maximally enhance it. The method, i.e., combining wire spacing with wire ordering, focuses on bus dynamic power optimization with a consideration of bus performance requirements. The optimization method is verified based on various nanometer technology parameters, showing that with 50% slack of routing space, 25.71% and 32.65% of power can be saved on average by the proposed optimization method for a global bus and an intermediate bus, respectively, under a 65-nm technology node, compared with 21.78% and 27.68% of power saved on average by uniform spacing technology. The proposed method is especially suitable for computer-aided design of nanometer scale on-chip buses.