Physico-Chemical and Nutritional Properties of a Food Broth Based on Nere (Parkia biglobosa)

Purpose: Diet and eating habits are major risk factors for the health and the development of disease, such as, for example, metabolic disorder leading to cardiovascular pathology and cancer, decreased immunity exposing to infections. This study of the physico-chemical and nutritional properties of a soumara-based food broth was carried out with the aim of promoting the consumption of organic broth made from nere seeds (soumara). That is to alleviate certain metabolic diseases, which is a matter of food safety, and also to limit the risk for the health about the consumption of some cooking stocks on the market. Methods: Several natural ingredients such as nere seeds (soumara), ginger, black pepper, parsley and garlic were used to create a nere-based stock. All these ingredients were freeze-dried and the powder obtained was used to make the broth, regarding their physical and chemical properties. Results: The broth had a good protein content of 17.41 ± 0.367 g/100g, a lipid content of 16.80 ± 0.08 g/100g and a fiber content of 8.66 ± 0.04 g/100g. In terms of nutritional values, the broth showed good levels of calcium 184.21 ± 0.09 mg/100g, potassium 50.04 ± 1.45 mg/100g and iron and zinc. In terms of antioxidant activity, the broth also showed good antioxidant activity. Conclusion: Regarding the properties of our food broth, whose composition is based on natural ingredients, could be recommended for consumption and, its properties, could play an important role in preventing and combating certain metabolic diseases.

Physico-Chemical Properties of Soils from Diguel and Koudalwa Tchad,and Phytoremediation Potentials of Acasia and Kinkeliba Plants in Removing Cr and Cu from These Soils

The aim of this study to investigate the physico-chemical properties of soils from Diguel and Koudalwa Tchad,and phytoremediation potentials of acasia and kinkeliba plants in removing Cr and Cu from these soils.Soil was sampled from the tannery plant in Diguel and agricultural land around crude oil activities in Koudalwa.Soils were characterized by the following properties:pH,(Electrical Conductivity),TDS(Total Dissolved Solids),salinity,bulk density,OM(Organic Matter),nitrate,phosphate,clay,silt,sand,and textural class.The acasia and kinkeliba plants were used to decontaminate Cu and Cr from sample soils for 30 days period.The bulk density of all the soil samples from Kouldawa was higher compared to Diguil,ranging from 1.421 to 1.64 g/cm^(3)compared to 1.21 to 1.51 g/cm^(3)for Diguel.Most of the soils in Kouldawa are mineral soils,while those of Diguel are mostly mineral soil with some organics.Diguel soils are richer in nitrate(577.9 to 2,687.32 mg/kg in Diguel and 33.64 to 197.64 mg/kg in Kouldawa)and phosphate than soils from Kouldawa.Soils from the studied areas are not saline except for a subsurface soil in Diguel(salinity,4.21;EC,4.280 dS/m;TDS,3,040 mg/L).The highest amount of Cr and Cu removed by acasia is 78%and 53.12%compared to 73.8%and 52.21%by kinkeliba.Diguel soil can be very suitable for agriculture and Kouldawa soils for construction.Acasia and kinkeliba can be effectively used to decontaminate the studied soils from heavy metal pollution.

Effect of heat treatment of titanium substrates on the properties of IrO_2-Ta_2O_5 coated anodes

The Ti substrates of IrO 2 -Ta 2 O 5 coated anodes were treated by solid-solution and aging, stress relieving annealing, and recrystallization annealing, and the coatings were prepared by thermal decomposition of a mixture of H 2 IrCl 6 ·6H 2 O dissolved in hydrochloric acid and TaCl 5 dissolved in alcohol. Scanning electron microscopy （SEM）, cyclic voltammetry （CV）, electrochemical impedance spectroscopy （EIS）, and accelerated life test （ALT） were employed to study the microstructure and electrochemical properties of the anodes. Compared with the anode without heat treatment, the anodes with heat treatment are of higher electrochemical activity and longer accelerated life; especially, the anode with recrystallization annealing treatment has the best electrochemical properties and the longest accelerated life.

Physico-Chemical Properties of Flour, Starch, and Modified Starch of Two Rice Varieties

The physical and chemical properties of the flours, starches, and modified starches of indica rice and japonica rice were investigated in this paper. Results showed that the swelling powers of flour, starch, and phosphate starch [substitution degree （DS）=0.065] of japonica rice were significantly higher than those （DS=0.065） of indica rice. The transmittance of modified starches was highest; and that of flours was lowest. The pasting property investigated with rapid visco analyzer （RVA） indicated that the peak viscosity and breakdown value of paste with high swelling power were high. Furthermore, the effect of protein and amylose content on pasting property were investigated. The results of rheological properties determined using rheological rheometer showed that at the same temperature, the storage modulus （G′ of flour, starch, and modified starch of indica rice was higher than that of japonica rice. For each variety, the G′of flour was the highest, while the G′of modified starch was the lowest.

Physico-Chemical Properties and Enzyme Activities of the Arable Soils in Lhasa,Tibet,China

An understanding of the physical,chemical,and biological properties of a soil provides a basis for soil use and management.This paper reports the major physico-chemical properties and enzyme activities of the soils of Lhasa's main arable lands and the factors that influence these soil properties.Composite and core samples were taken from the three main arable soil types(alluvial soil,subalpine arable steppe soil,and subalpine arable meadow soil) and were analysed using standard methods.The bulk density and the ventilation porosity ratio of the soils were close to the recommended values for arable lands,and the dominant soil texture was sandy.The soil moisture release rates were arable steppe soil > alluvial soil > arable meadow soil.Soil organic matter content,Cation-Exchange Capacity(CEC),total and available nitrogen content,and catalase activity of the arable meadow soil were higher than those of the alluvial and the arable steppe soils,while soil pH in the arable meadow was lower.Most of the measured properties did not show a significant variance among these three soils.However,the measured indices(apart from the total potassium) indicate that there are notable differences among the three types of soil.The results implied that the utilisation patterns of the arable soil or human activities,such as tillage practices and fertiliser applications,have a substantialeffect on the soil properties in this region.Our results suggest that the cultivation practices in the region have apparently positive impact on the soil organic matter,nutrient contents and bulk density probably due to the sound fertiliser management such as the applications of farmyard manure and chemical fertilisers.However,intense cultivation practices lowered the activity of most soil enzymes.The results demonstrate that the choice of soil management strategy had a significant impact on the soil physicochemical and biological properties in the region studied.

Soil Physico-Chemical Properties and Microflora as Influenced by Bispyribac Sodium 10% SC in Transplanted Kharif Rice

The effects of bispyribac sodium 10% SC and butachlor 50% SC on soil physico-chemical properties and microflora in transplanted kharifrice were investigated over two seasons （2010 and 2011 ） Effects of the herbicide on bulk density, water holding capacity, moisture content, soil pH, organic matter content, electrical conductivity, as well as total nitrogen, available phosphorus and available potassium contents were analyzed along with microflora population （total bacteria, actinomycetes and fungi）. No significant changes in soil physico-chemical properties were observed. Herbicide treatments resulted in decreases in microbial counts initially. With the degradation of applied herbicides within a considerable time, the microflora populations even exceeded the initial count at 60 d after application of the herbicide.

Effects of Plant Types on Physico-chemical Properties of Reclaimed Mining Soil in Inner Mongolia,China

A field experiment was conducted in Jungar Banner,Inner Mongolia,China to study the effects of plant types on the physical structure and chemical properties of open-cast mining soils reclaimed for 15 years,and to analyze the triggering factors of the soil formation.Results indicate that plant types affect soil-forming process especially in the upper layer (0-20 cm),and the spatial structure of reclaimed plant is the main reason for variability of the soil-forming process.In the upper soil layer at the site reclaimed with mixed plants,the concentrations of soil organic matter (SOM) and soil organic carbon (SOC) are the highest,and they were significantly higher at the sites reclaimed with Leymus chinensis,Caragana sinica,which is mainly due to a large amount of litter fall and root exudation in herbages and shrubs.However,the concentrations of SOM and SOC in the soils at the reclaimed sites are quite low comparing with those in local primary soil,which indicates the importance of using organic amendments during the ecological restoration in the study area.

Influence of Different Substrates on the Electrochromic Property of Polyaniline Films

The polyaniline （PANI） films doped with complex acid （sulfuric acid and sulfosalicylic acid） were prepared using the potentiostatic method on bare nickel flake （NF） and flexible polyethylene terephthalate （PET）/indium tin oxide （ITO） substrates. The contents of the PANI films,surface elements, electrochromic property and electrical conductivity were characterized by energy dispersive X-ray spectrometer （EDS）, cyclic voltammetry （CV） and electrochemical impedance spectroscopy （EIS）. The experimental results show that differences exist among cycle stability, redox reversibility and response time of polyaniline films on these two kinds of substrates, but the electrochromic phenomenon of the PANI films is in substantial agreement. The equilibrium transmittance spectra in the visible region （400-800 nm） for the PANI film on flexible PET/ITO substrate was obtained at different applied potential from -0.4 to 1.5 V. The results show that the transmittance of the PANI film by applying voltage is adjustable in a row and has excellent electrochromic performance.

Properties of Reactive Magnetron Sputtered ITO Films without in-situ Substrate Heating and Post-deposition Annealing

Indium tin oxide (ITO) films were prepared on polyester, Si and glass substrate with relatively high deposition rate of above 0.9 nm/s by DC reactive magnetron sputtering technique at the sputtering pressure of 0.06 Pa system, respectively. The dependence of resistivity on deposition parameters, such as deposition rate, target-to-substrate distance (TSD), oxygen flow rate and sputtering time (thickness), has been investigated, together with the structural and the optical properties. It was revealed that all ITO films exhibited lattice expansion. The resistivity of ITO thin films shows significant substrate effect: much lower resistivity and broader process window have been reproducibly achieved for the deposition of ITO films onto polyester rather than those prepared on both Si and glass substrates. The films with resistivity of as low as 4.23 x 10^-4 Ω.cm and average transmittance of ～78% at wavelength of 400～700 nm have been achieved for the films on polyester at room temperature.

Evaluation of sensory properties and their correlation coefficients with physico-chemical indices in Turkish set-type yoghurts

Sensory properties and physico-chemical parameters of 10 most popular brands of commercial set-type Turkish yoghurts were evaluated and correlation coefficients between the two indices were investigated. The results indicated that increases in volatile compounds (acetaldehyde, 2-butanone, 2-nanonane, ethyl acetate), titratable acidity, ash and fat contents inversely correlated with the overall acceptability score of the yoghurt. However, diacetyl, C4 to C12 free fatty acids, pH, whiteness index and texture positively correlated with overall acceptability of the yoghurt products. It was concluded that the acceptability of the Turkish set-type yoghurts is mainly governed by the fifteen volatile compounds as well as the physico-chemical properties determined. Thus, the overall acceptability of the yoghurts was not influenced by a single characteristic, but rather by complex in nature.

Characteristics of physico-chemical properties, volatile compounds and free fatty acid profiles of commercial set-type Turkish yoghurts

Ten most popular brands of commercial Turkish set-type yoghurts were collected from local retail outlets in Hatay, Turkey for two separate periods, and analyzed for basic nutrients, physico-chemical properties, volatile aroma compounds and free fatty acid profiles to compare their differences among the yoghurt products. The results showed that there were significant differences (P<0.05, 0.01, or 0.001) and variations in physico-chemical indices, volatile aroma compounds and volatile free fatty acid profiles among the yoghurt brands, which ultimately influence the flavor quality of the product. Acetaldehyde was predominant volatile compound in yoghurts, which followed by acetone, acetoin, diacetyl and ethanol. The level of diacetly was inversely related to titratable acidity, acetaldehyde and ethanoic acid. From ketones with high carbones 2-undecanone and 2-pentadecanone were higher than 2-butanone, 2-nanonane and 2-tridecanone. These ketones are related to fat content of yoghurt. Among short chain free fatty acids, ethanoic (acetic) acid was the most abundant in yoghurts, followed by hexanoic, octanoic and butanoic acids. These differences in detected chemical compositions of volatile compounds and free fatty acids would be applicable to predict flavor, nutritional value, quality control or shelf-life of the commmercial set-type Turkish yoghurts.

Theoretical Investigation of Influence of Mechanical Stress on Magnetic Properties of Ferromagnetic/Antiferromagnetic Bilayers Deposited on Flexible Substrates

Effect of mechanical stress on magnetic properties of an exchange-biased ferromagnetic/antiferromagnetic bilayer deposited on a flexible substrate is investigated. The hysteresis loops with different magnitudes and orientations of the stress can be classified into three types. The corresponding physical conditions for each type of the loop are deduced based on the principle of minimal energy. The equation of the critical stress is derived, which can judge whether the loops show hysteresis or not. Numerical calculations suggest that except for the magnitude of the mechanical stress, the relative orientation of the stress is also an important factor to tune the exchange bias effect.

Mechanical and magnetocaloric adjustable properties of Fe3O4/PET deformed nanoparticle film

The flexibility of nanoparticle films is a topic of rapidly growing interest in both scientific and engineering researches due to their numerous potential applications in a broad range of wearable electronics and biomedical devices.This article presents the elucidation of the properties of nanoparticle films.Here,a flexible film is fabricated based on polyethylene terephthalate(PET)and magnetic iron oxide at the nanoscale using layer-by-layer technology.The 2D thin flexible film material can be bent at different angles from 0°to 360°.With an increase in elastic deformation angles,the magnetocaloric effect of the film gradually increases in the alternating magnetic field.The test results from a vibrating sample magnetometer and a low-frequency impedance analyzer demonstrate that the film has a good magnetic response and anisotropy.The magnetocaloric effect and magnetic induction effect are controlled by deformation,providing a new idea for the application of elastic films.It combines the flexibility of the nanoparticle PET substrate and,in the future,it may be used for skin adhesion for administration and magnetic stimulation control.

Optical and Irradiation-Resistant Properties of ITO Films on F46 and PI Substrates

This study investigated indium tin oxide(ITO) films that were deposited on fluororesin-46(F46) and polyimide(PI) transparent flexible substrates by a DC magnetron sputtering system. The optical properties of ITO films on F46 and PI including transmittance and reflectance in visible, near-infrared, and infrared spectral regions were obtained, and the surface morphology, and optical and electrical properties of ITO/F46 and ITO/PI after vacuum ultraviolet irradiation were investigated. The results showed that the mean transmittances of ITO/F46 and ITO/PI decreased and the sheet resistance increased after the irradiation, and these effects were mainly attributed to the greater surface roughness and crystal defects caused by the irradiation.

Relationship between the eating quality and the physico-chemical properties of high grain quality rice in China

Relationship between eating quality(EQ)andphysico-chemical properties of 78 high grainquality rice varieties,45 indica and 33 japoni-ca,were studied in 1995.The samples werecollected from different rice growing regions in20 provinces.The physico-chemical proper-ties,including grain length(GL),length towidth ratio(L/W),chalky grain rate(CG),chalkiness(CH),translucency(TR),gela-tinization temperature(GT,measured by alka-li spreading value),gel consistency(CA2),amylase content(AC),and protein content(PC)were measured according to the standard

Effect of radio-frequency substrate bias on ion properties and sputtering behavior of 2 MHz magnetron sputtering

The effect of radio-frequency substrate bias on ion properties and sputtering behavior of 2 MHz magnetron discharge was investigated. The ion velocity distribution function(IVDF), the maximum ion energy and ion flux density were measured at the substrate by a retarding field energy analyzer. The sputtering behavior was investigated by the electric characteristics of target and bias discharges using voltage–current probe technique. It was found that the substrate bias led to the decrease of sputtering power, voltage and current with the amplitude <7.5%. The substrate bias also led to the broadening of IVDFs and the increase of ion flux density, made the energy divergent of ions impacting the substrate. This effect was further enhanced by increasing bias power and reducing discharge pressure.

Grid and substrate bias effects on mechanical properties of diamond films prepared by HFCVD

Diamond films were prepared at different grid bias and substrate bias in hot filament chemical vapor deposition (HFCVD) system. The Raman and SEM results show that grain size decreases and non-diamond impurities increase for applying grid and substrate bias currents. The defects and impurities in the film increase with the decrease of grain size, which causes the decrease of hardness and elastic modulus of diamond films. The fracture toughness of film increases because of the grain size effects by applying bias. The grid bias and substrate bias make the friction coefficient smaller because of the smaller grain size and lubricating effect of graphite in the film. But the excessively high substrate bias current will lead to the dramatic decrease of mechanical properties of CVD diamond as a lot of non-diamond impurities appear in the film.

Epitaxial Growth and Magnetic Properties of NiMnAs Films on GaAs Substrates

Single-phase Ni_(0.92)Mn_(1.08) As films with strained C_(1b) symmetry are grown on GaAs(001) substrates. In addition,a preferred epitaxial configuration of(110)-orientated Ni_(0.92)Mn_(1.08) As on(001)-orientated GaAs is revealed by synchrotron radiation measurement. The magnetic properties of the films are found to be significantly influenced by the growth temperature and the optimized growth temperature is determined to be ~370℃. According to the results of x-ray absorption spectroscopy, these phenomena can be attributed to the variation of the local electronic structure of the Mn atoms. Our work provides useful information for the further investigations of NiMnAs, which is a theoretically predicted half-metal.

Effect of substrate rotation speed on structure and properties of Al-doped ZnO thin films prepared by rf-sputtering

Al-doped ZnO(AZO)thin films were deposited on glass substrates by rf-sputtering at room temperature.The effects of substrate rotation speed(ωS)on the morphological,structural,optical and electrical properties were investigated.SEM transversal images show that the substrate rotation produces dense columnar structures which were found to be better defined under substrate rotation.AFM images show that the surface particles of the samples formed under substrate rotation are smaller and denser than those of a stationary one,leading to smaller grain sizes.XRD results show that all films have hexagonal wurtzite structure and preferred c-axis orientation with a tensile stress along the c-axis.The average optical transmittance was above90%in UV-Vis region.The lowest resistivity value(8.5×10?3Ω·cm)was achieved atωS=0r/min,with a carrier concentration of1.8×1020cm?3,and a Hall mobility of4.19cm2/(V·s).For all other samples,the substrate rotation induced changes in the carrier concentration and Hall mobility which resulted in the increasing of electrical resistivity.These results indicate that the morphology,structure,optical and electrical properties of the AZO thin films are strongly affected by the substrate rotation speed.

Resistivity and Radio-Frequency Properties of Two-Generation Trap-Rich Silicon-on-Insulator Substrates

Crystal morphologies and resistivity of polysilicon trap-rich layers of two-generation trap-rich silicon-on-insulator（TR-SOI） substrates are studied. It is found that the resistivity of the trap-rich layer of generation 2（TR-G2）is higher than that of generation 1（TR-G1）, although the crystal morphologies of the trap rich layers are the same. In addition, the rf performance of two-generation TR-SOI substrates is investigated by coplanar waveguide lines and inductors. The results show that both the rf loss and the second harmonic distortion of TR-G2 are smaller than those of TR-G1. These results can be attributed to the higher resistivity values of both the trap-rich layer and the high-resistivity silicon（HR-Si） substrate of TR-G2. Moreover, the rf performance of the TR-SOI substrate with thicker buried oxide is slightly better. The second harmonics of various TR-SOI substrates are simulated and evaluated with the harmonic quality factor model as well. It can be predicted that the TR-SOI substrate will see further improvement in rf performance if the resistivities of both the trap-rich layer and HR-Si substrate increase.