pH Influence on Performance of Phytic Acid Conversion Coatings on AZ31 Magnesium Alloy in Simulated Body Fluid

Phytic acid （PA） conversion coating on AZ31 magnesium alloy is prepared by a deposition method. pH influences on the formation process, microstructure and properties of the conversion coating are investigated. Electrochemical tests including polarization curve and electrochemical impedance spectroscopy are used to examine the corrosion resistance, and scanning electron microscopy is used to observe the microstructure. The chemical nature of conversion coating is investigated by energy dispersive spectroscopy. And thermodynamic method is used to analyze the optimum pH. The results show that PA conversion coating can improve the corrosion resistance of AZ31 Mg alloy. The maximum efficiency achieves 89.19% when the AZ31 Mg alloy is treated by PA solution with pH=5. It makes the corrosion potential of sample shift positively about 156 mV and corrosion current density is nearly an order of magnitude less than that of the untreated sample. The thermodynamic analysis shows that the corrosion resistance of PA coatings is affected by not only the concentration of PA ion and Mg2＋ but also the release rate of hydrogen.

Study on Phytic Acid Conversion Coating on Mg-Li Alloy

The impact of phytic acid concentration,immersion time and soaking temperature on phytic acid conversion coating of the Mg-Li alloy are studied.The surface morphology and the corrosion of the phytic acid conversion coating are tested by using scanning electron microscopy and the electrochemical analyzer.The results show that phytic acid concentration and immersion time,soaking temperature affects the microstructure and corrosion resistance of the phytic acid conversion coating.There is a passivation interval with a smaller capacitor and larger resistor in the phytic acid conversion coating.The phytic acid conversion coating is made up of white particle and flake film.