A Single-Layer Piezoelectric Composite Separator for Durable Operation of Li Metal Anode at High Rates

Piezoelectric ceramic and polymeric separators have been proposed to effectively regulate Li deposition and suppress dendrite growth,but such separators still fail to satisfactorily support durable operation of lithium metal batteries owing to the fragile ceramic layer or low-piezoelectricity polymer as employed.Herein,by combining PVDF-HFP and ferroelectric BaTiO_(3),we develop a homogeneous,single-layer composite separator with strong piezoelectric effects to inhibit dendrite growth while maintaining high mechanical strength.As squeezed by local protrusion,the polarized PVDF-HFP/BaTiO_(3)composite separator generates a local voltage to suppress the local-intensified electric field and further deconcentrate regional lithium-ion flux to retard lithium deposition on the protrusion,hence enabling a smoother and more compact lithium deposition morphology than the unpoled composite separator and the pure PVDF-HFP separator,especially at high rates.Remarkably,the homogeneous incorporation of BaTiO_(3)highly improves the piezoelectric performances of the separator with residual polarization of 0.086 pC cm^(-2)after polarization treatment,four times that of the pure PVDF-HFP separator,and simultaneously increases the transference number of lithium-ion from 0.45 to 0.57.Beneficial from the prominent piezoelectric mechanism,the polarized PVDF-HFP/BaTiO_(3)composite separator enables stable cyclic performances of Li||LiFePO_(4)cells for 400 cycles at 2 C(1 C=170 mA g^(-1))with a capacity retention above 99%,and for 600 cycles at 5 C with a capacity retention over 85%.

Development,modeling and application of piezoelectric fiber composites

Piezoelectric materials are capable of actuation and sensing and have been used in a wide variety of smart devices and structures.Active fiber composite and macro fiber composite are newly developed types of piezoelectric composites,and show superior properties to monolithic piezoelectric wafer due to their distinctive structures.Numerous work has focused on the performance prediction of the composites by evaluation of structural parameters and properties of the constituent materials with analytical and numerical methods.Various applications have been explored for the piezoelectric fiber composites,including vibration and noise control,health monitoring,morphing of structures and energy harvesting,in which the composites play key role and demonstrate the necessity for further development.

FINITE ELEMENT MODELING OF MODERATELY THICK COMPOSITE PLATE WITH PIEZOELECTRIC SENSORS AND ACTUATORS

A rectangular finite element for laminated plate with bonded and/or embedded piezoelectric sensors and actuators is developed based on the variational principle and the first order shear deformation theory. The element has four-node, 20-degrees-of-freedom with one potential degree of freedom for each piezoelectric layer to represent the piezoelectric behavior. The higher order derivation of deflection is obtained by using the normal rotation expressions to take the effects of transverse shear deformation into considerations. The finite element can accurately simulate the deformation of both thin and moderately thick plates. A Fortran program is written and a number of benchmark tests are exercised to verify its effectiveness. Results are compared well with the existing data. The unbalanced composite with piezoelectric layers is then analyzed by using the model. Results show that the changes of the ratio between the thickness of positive angle layers and the negative angle layers have an effect on the deformation of the structure under the same electric loading.

Dielectric and piezoelectric properties of(Li,Ce) modified NaBi_5Ti_5O_(18) composite ceramics

Nominal （Li0.5Ce0.5）x（Na0.5Bi0.5）（1-x）Na0.5Bi4.5Ti5O18 composite ceramics were fabricated using conventional solid-state reaction method. The coexistence of bismuth layer-structured phase and perovskite phase was determined in these ceramics using XRD technique. At room temperature, the x=0.11 sample showed the largest piezoelectric constant, d33, of about 26.5 pC/N and the largest electromechanical coupling factor, kt, of about 30%. Even after annealing at 500 ℃, the value of d33 was still about 19 pC/N, in x=0.08-0.11 samples. Moreover these composite ceramics showed low temperature coefficients of dielectric constant and high electrical resistivity in the temperature region of 450-550 ℃. These results indicated that （Li, Ce） modified NaBi5Ti5O18 composite ceramics were promising piezoelectric materials for high-temperature applications.

WAVE PROPAGATION IN PIEZOELECTRIC/PIEZOMAGNETIC LAYERED PERIODIC COMPOSITES

This paper is concerned with the dynamic behaviors of wave propagation in layered periodic composites consisting of piezoelectric and piezomagnetic phases. The dispersion relations of Lamb waves axe derived. Dispersion curves and displacement fields are calculated with different piezoelectric volume fractions. Numerical results for BaTiO3/CoFe2O4 composites show that the dispersion curves resemble the symmetric Lamb waves in a plate. Exchange between the longitudinal （i.e. thickness） mode and coupled mode takes place at the crossover point between dispersion curves of the first two branches. With the increase of BaTiO3 volume fraction, the crossover point appears at a lower wave number and wave velocity is higher. These findings are useful for magnetoelectric transducer applications.

A refined finite element method for bending analysis of laminated plates integrated with piezoelectric fiber-reinforced composite actuators

This research presents a finite element formulation based on four-variable refined plate theory for bending analysis of cross-ply and angle-ply laminated composite plates integrated with a piezoelectric fiber-reinforced composite actuator under electromechanical loading. The four-variable refined plate theory is a simple and efficient higher-order shear deformation theory, which predicts parabolic variation of transverse shear stresses across the plate thickness and satisfies zero traction conditions on the plate free surfaces. The weak form of governing equations is derived using the principle of minimum potential energy, and a 4-node non-conforming rectangular plate element with 8 degrees of freedom per node is introduced for discretizing the domain. Several benchmark problems are solved by the developed MATLAB code and the obtained results are compared with those from exact and other numerical solutions, showing good agreement.

Double Hopf bifurcation of composite laminated piezoelectric plate subjected to external and internal excitations

The double Hopf bifurcation of a composite laminated piezoelectric plate with combined external and internal excitations is studied. Using a multiple scale method, the average equations are obtained in two coordinates. The bifurcation response equations of the composite laminated piezoelectric plate with the primary parameter resonance, i.e., 1：3 internal resonance, are achieved. Then, the bifurcation feature of bifurcation equations is considered using the singularity theory. A bifurcation diagram is obtained on the parameter plane. Different steady state solutions of the average equations are analyzed. By numerical simulation, periodic vibration and quasi-periodic vibration responses of the Composite laminated piezoelectric plate are obtained.

Dielectric and Piezoelectric Properties of 0-3 PZT/PVDF Composite Doped with Polyaniline

Lead zirconate titanate （ PZT ） / polyvinylidene fluoride （PVDF） 0-3 piezoelectric composites doped with polyaniline （PANI） were obtained by hot-press method. The polarization properties of the composites were characterized by XRD and P- E hysteresis loops at room temperature. And the dielectric and piezoelectric properties were also measured. The results show that the poling of PZT could be effectively carried oat and the dielectric constant e, and dissipation tanδ increase monatonously by increasing the volume fraction of PANI in the composite. The piezoelectric constant d33, and the planar electromechanical coupling factor kp increase while the mechanical quality factor Qm decreases with the increase in the content of PANI. The d33, kp and Qm show the extremum values at 8 vol%-10 vol% PANI.

Disbond detection with piezoelectric wafer active sensors in RC structures strengthened with FRP composite overlays

The capability of embedded piezoelectric wafer active sensors(PWAS)to perform in-situ nondestructive evaluation(NDE)for structural health monitoring(SHM)of reinforced concrete(RC)structures strengthened with fiber reinforced polymer(FRP)composite overlays is explored.First,the disbond detection method were developed on coupon specimens consisting of concrete blocks covered with an FRP composite layer.It was found that the presence of a disbond crack drastically changes the electromecfianical(E/M)impedance spectrum lneasurcd at the PWAS terlninals.The spectral changes depend on the distance between the PWAS and the crack tip.Second,large scale experiments were conducted on a RC beam strengthened with carbon fiber reinforced polymer(CFRP)composite overlay.The beam was subject to an accelerated fatigue load regime in a three-point bending configuration up to a total of 807,415 cycles.During these fatigue tests,the CFRP overlay experienced disbonding beginning at about 500,000 cycles.The PWAS were able to detect the disbonding before it could be reliably seen by visual inspection.Good correlation between the PWAS readings and the position and extent of disbond damage was observed.These preliminary results demonstrate the potential of PWAS technology for SHM of RC structures strengthened with FRP composite overlays.

Test on Sensor Effect of Cement Matrix Piezoelectric Composite

A novel cement matrix smart piezoelectric composite and its application as sensing element are presented.A cement matrix smart piezoelectric composite piece encapsulated in a cement mortar formed a practical sensor, and it was tested on material test system with cyclic loading.According to the theoretical analysis, the function of the cement matrix piezoelectric sensor output voltage was expressed in terms of the magnitude of the input cyclic loading amplitude and frequency.The curve fitting of gain function that is defined as sensor′s gain factor under different frequencies of input loading was carried out. From the results of curve fitting, it is found that the cement matrix smart piezoelectric composite has a simple relationship between input loading and output voltage.Therefore the cement matrix piezoelectric composite sensor is suitable to be applied in structural health monitoring.

Enhanced mechanical behaviour of lead zirconate titanate piezoelectric composites incorporating zinc oxide nanowhiskers

This paper reports that the lead zirconate titanate （PZT） piezoelectric composites incorporating zinc oxide nanowhiskers （ZnOw） were prepared by the conventional solid state processing. The whisker-dispersed PZT composites （PZT/ZnOw） presented a significant enhancement in the mechanical properties such as Young＇s modulus, tensile strength and compressive strength. Especially, the compressive strength increased from 153 MPa for the PZT to 228 MPa for the PZT/ZnOw composites. The reinforcement mechanism in strength of the composites was discussed. The me- chanical quality factors of the PZT/ZnOw composites increased considerably, while the piezoelectric constants and electromechanical coupling coefficient decreased slightly. The composites with good electrical and excellent mechanical properties are promising for further applications.

Fabrication and Performances of 1-3-2 Piezoelectric Ceramic/Polymer Composite

A novel 1-3-2 piezoelectric composite has been developed,which consists of piezoelectric ceramic plate and 1-3 piezoelectric composite.The composite was fabricated by dicing PZT ceramic along mutual perpendicular two directions and then filling epoxy into grooves.The piezoelectric and electromechanical properties of the novel composite were determined. The results show a coefficient d_ (33) of 405pC/N,a vibration displacement of 113.5pm,an acoustic impendence of 13.3 Mraly, a bandwidth of 12kHz and a thickness electromechanical coupling coefficient of 0.56.

Time-varying nonlinear dynamics of a deploying piezoelectric laminated composite plate under aerodynamic force

Using Reddy’s high-order shear theory for laminated plates and Hamilton’s principle, a nonlinear partial differential equation for the dynamics of a deploying cantilevered piezoelectric laminated composite plate, under the combined action of aerodynamic load and piezoelectric excitation, is introduced. Two-degree of freedom(DOF)nonlinear dynamic models for the time-varying coefficients describing the transverse vibration of the deploying laminate under the combined actions of a first-order aerodynamic force and piezoelectric excitation were obtained by selecting a suitable time-dependent modal function satisfying the displacement boundary conditions and applying second-order discretization using the Galerkin method. Using a numerical method, the time history curves of the deploying laminate were obtained, and its nonlinear dynamic characteristics,including extension speed and different piezoelectric excitations, were studied. The results suggest that the piezoelectric excitation has a clear effect on the change of the nonlinear dynamic characteristics of such piezoelectric laminated composite plates. The nonlinear vibration of the deploying cantilevered laminate can be effectively suppressed by choosing a suitable voltage and polarity.

Analysis on vibration characteristics of large-size rectangular piezoelectric composite plate based on quasi-periodic phononic crystal structure

Based on the theory of composite materials and phononic crystals(PCs),a large-size rectangular piezoelectric composite plate with the quasi-periodic PC structure composed of PZT-4 and epoxy is proposed in this paper.This PC structure can suppress the transverse vibration of the piezoelectric composite plate so that the thickness mode is purer and the thickness vibration amplitude is more uniform.Firstly,the vibration of the model is analyzed theoretically,the electromechanical equivalent circuit diagram of three-dimensional coupled vibration is established,and the resonance frequency equation is derived.The effects of the length,width,and thickness of the piezoelectric composite plate at the resonant frequency are obtained by the analytical method and the finite element method,the effective electromechanical coupling coefficient is also analyzed.The results show that the resonant frequency can be changed regularly and the electromechanical conversion can be improved by adjusting the size of the rectangular piezoelectric plate.The effect of the volume fraction of the scatterer on the resonant frequency in the thickness direction is studied by the finite element method.The band gap in X and Y directions of large-size rectangular piezoelectric plate with quasi-periodic PC structures are calculated.The results show that the theoretical results are in good agreement with the simulation results.When the resonance frequency is in the band gap,the decoupling phenomenon occurs,and then the vibration mode in the thickness direction is purer.

Preparation and Electromechanical Properties of PVDF Matrix Piezoelectric Composites Containing Highly Oriented BaTiO_3 Whiskers

The piezoelectric composites containing highly oriented BaTiO3 whiskers as active phase and PVDF as matrix have been prepared by micro-hole extrusion and orientation in carried fibers. The morphology of oriented BaTiO3 whiskers and microstructure of the composites were observed by SEM. As for its electromechanical properties, it is found that the dielectric constant, piezoelectric constant and remnant of polarization in the BaTiO3 whisker-PVDF composite are considerably higher than that in the BaTiO3 powders-PVDF composite, while the loss factors follow the opposite trend. For the BaTiO3 whisker-PVDF composite, the values of ε, d33 and Pr parallel to the whisker orientation (normal specimen) are much higher than that perpendicular to the whisker orientation (parallel specimen). The significant effects of the connective passages of active phase on electromechanical properties of the piezoelectric composites has also been investigated.

Influence of Particle Size on Piezoelectricity of Piezo-composites

Serial material model （Dilute model）and Limited Units （LU）method were employed to analyze the performance of binary piezo-composite system.The reckoned electric potential deployments illustrated difference while the particles were different.Their piezoelectricities were also calculated according to the model,and furthermore comparation suggested that small particles living in the tolerance improve the piezoelectricity of piezo-composite.Experiments coinciding with analyses were processed simultaneously. Ceramics were milled for different time in order to control the concentration of particle size.The results showed that the filled particles enhanced the piezoelectricity of binary piezo-composite system efficiently whereas too many chips deteriorated the performance of piezo-composites.

Elastic properties of spherically anisotropic piezoelectric composites

Effective elastic properties of spherically anisotropic piezoelectric composites, whose spherically anisotropic piezoelectric inclusions are embedded in an infinite non-piezoelectric matrix, are theoretically investigated. Analytical solu- tions for the elastic displacements and the electric potentials under a uniform external strain are derived exactly. Taking into account of the coupling effects of elasticity, permittivity and piezoelectricity, the formula is derived for estimating the effective elastic properties based on the average field theory in the dilute limit. An elastic response mechanism is revealed, in which the effective elastic properties increase as inclusion piezoelectric properties increase and inclusion dielectric properties decrease. Moreover, a piezoelectric response mechanism, of which the effective piezoelectric response vanishes due to the symmetry of spherically anisotropic composite, is also disclosed.

THE EFFECTIVE PROPERTIES OF PIEZOELECTRIC COMPOSITE MATERIALS WITH TRANSVERSELY ISOTROPIC SPHERICAL INCLUSIONS

The effective properties of piezoelectric composite materials are very important in engineering. In this paper, the closed_form solutions of the constraint_strain and the constraint_electric_field of a transversely isotropic spherical inclusion in an infinite non_piezoelectric matrix are obtained. The dilute solutions of piezoelectric composite materials with transversely isotropic spherical inclusions are also given. The solutions in the paper can be readily utilized in analysis and design of piezoelectric composite materials or smart materials and smart structures.

The Role of PZT in Flexible 1-3 Piezoelectric Composite for Smart Structure

Piezoelectric composite materials have the ability to perform both sensing and actuating functions.It is a viable candidate for smart actuation in underwater noise controlling with its higher coupling factor and lower acoustic impedance, when the piezoelectric rods are inclined to control its both the shear and the compression damping characteristics.In this paper, a simple physical model of 1-3 piezoelectric composite is advanced for maximizing the electromechanical coupling factor,the acoustic impedance,and the hydrophone figure of merit.

Efficient Reliability-Based Optimization Scheme for Piezoelectric Composite Beams with Delamination under Axial Compression

An efficient computational framework for reliability analysis and reliability-based design optimization of piezoelectric composite beam with delamination is presented.In the proposed approach,the transverse shear deformation,delamination and piezoelectricity of the beam are taken into account.By introducing the Heaviside step function into the displacement components and using the Rayleigh-Ritz method,and the buckling governing equations for the piezoelectric composite beams is obtained.The reliability of the beams is obtained by integrating the support vector machine method and first order reliability method,further the reliability-based optimization is executed through employing genetic algorithm.The effects of ply style,delamination length and voltage are discussed in details.Numerical results indicate that the comprehensive computational scheme provides a unified numerical framework to analysis the nondeterministic buckling and reliability efficiently.