Piezoelectric actuators are distributed on both side of a rectangular wing model,and the possibility of improvement of aircraft rolling power is investigated. The difference between the model with aileron deflection a...Piezoelectric actuators are distributed on both side of a rectangular wing model,and the possibility of improvement of aircraft rolling power is investigated. The difference between the model with aileron deflection and the model without aileron (fictitious control surface, FCS) is studied. The analytical results show that these two cases are substantial different. In aileron deflection case, the aeroelastic effect is disadvantageous, so the structural stiffness should be high until the electrical voltage is not necessary. But in the case of FCS,the aeroelastic effect is advantageous and it means that lower structural stiffness can lead to lower voltage. Compared with aileron project, the FCS project can save structure weight.展开更多
Inertial piezoelectric actuators are widely applied in precision devices with simple structure and accurate movement.However,existing inertial piezoelectric actuators still face the challenges of rollback motion and b...Inertial piezoelectric actuators are widely applied in precision devices with simple structure and accurate movement.However,existing inertial piezoelectric actuators still face the challenges of rollback motion and bulky power supply.In this work,an alternate excitation strategy and a customized small power supply for a bimorph rotary piezoelectric actuator(BRPA)are proposed to solve the problems.The BRPA prototype is designed with a bipedal symmetrical structure,measuring 35 mm in height and 32 mm in diameter,which has a maximum rotation velocity of 0.247 rad/s and a resolution of 0.66μrad.Thanks to the bipedal symmetrical structure,the friction directions between the driving feet and the rotor can be coordinated to suppress the rollback.The rollback ratio is almost zero when the phase difference of the exciting signal is set as 180°.The customized power supply is designed and manufactured,whose size is 58 mm×56 mm×46 mm.It can output signals for the single step mode and the continuous mode,and they are adopted to excite BRPA to achieve a small stroke with one single step and a large stroke with continuous step,respectively.Then,an experimental system for optical fiber alignment is developed based on the BRPA and the customized small power supply,the experiment has verified the practicability of this work in the precision fields,especially in the miniaturized precision systems.展开更多
This paper presents a general analytical model of flexible isolation system for application to the installation of high-speed machines and lightweight structures. Piezoelectric stack actuators are employed in the mode...This paper presents a general analytical model of flexible isolation system for application to the installation of high-speed machines and lightweight structures. Piezoelectric stack actuators are employed in the model to achieve vibration control of flexible structures, and dynamic characteristics are also investigated. Mobility technique is used to derive the governing equations of the system. The power flow transmitted into the foundation is solved and considered as a cost function to achieve optimal control of vibration isolation. Some numerical simulations revealed that the analytical model is effective as piezoelectric stack actuators can achieve substantial vibration attenuation by selecting proper value of the input voltage.展开更多
When saving energy in a pneumatic system,the problem of energy losses is usually solved by reducing the air supply pressure.The power-matching method is applied to optimize the air-supply pressure of the pneumatic sys...When saving energy in a pneumatic system,the problem of energy losses is usually solved by reducing the air supply pressure.The power-matching method is applied to optimize the air-supply pressure of the pneumatic system,and the energy-saving effect is verified by experiments.First,the experimental platform of a pneumatic rotary actuator servo-control system is built,and the mechanism of the valve-controlled cylinder system is analyzed.Then,the output power characteristics and load characteristics of the system are derived,and their characteristic curves are drawn.The employed air compressor is considered as a constant-pressure source of a quantitative pump,and the power characteristic of the system is matched.The power source characteristic curve should envelope the output characteristic curve and load characteristic curve.The minimum gas supply pressure obtained by power matching represents the optimal gas supply pressure.The comparative experiments under two different gas supply pressure conditions show that the system under the optimal gas supply pressure can greatly reduce energy losses.展开更多
文摘Piezoelectric actuators are distributed on both side of a rectangular wing model,and the possibility of improvement of aircraft rolling power is investigated. The difference between the model with aileron deflection and the model without aileron (fictitious control surface, FCS) is studied. The analytical results show that these two cases are substantial different. In aileron deflection case, the aeroelastic effect is disadvantageous, so the structural stiffness should be high until the electrical voltage is not necessary. But in the case of FCS,the aeroelastic effect is advantageous and it means that lower structural stiffness can lead to lower voltage. Compared with aileron project, the FCS project can save structure weight.
基金supported by the National Natural Science Foundation of China(Grant Nos.52105015 and 52225501)the China Postdoctoral Science Foundation(Grant No.2021M690830)the Postdoctoral Science Foundation of Heilongjiang Province,China(Grant No.LBH-Z21018)。
文摘Inertial piezoelectric actuators are widely applied in precision devices with simple structure and accurate movement.However,existing inertial piezoelectric actuators still face the challenges of rollback motion and bulky power supply.In this work,an alternate excitation strategy and a customized small power supply for a bimorph rotary piezoelectric actuator(BRPA)are proposed to solve the problems.The BRPA prototype is designed with a bipedal symmetrical structure,measuring 35 mm in height and 32 mm in diameter,which has a maximum rotation velocity of 0.247 rad/s and a resolution of 0.66μrad.Thanks to the bipedal symmetrical structure,the friction directions between the driving feet and the rotor can be coordinated to suppress the rollback.The rollback ratio is almost zero when the phase difference of the exciting signal is set as 180°.The customized power supply is designed and manufactured,whose size is 58 mm×56 mm×46 mm.It can output signals for the single step mode and the continuous mode,and they are adopted to excite BRPA to achieve a small stroke with one single step and a large stroke with continuous step,respectively.Then,an experimental system for optical fiber alignment is developed based on the BRPA and the customized small power supply,the experiment has verified the practicability of this work in the precision fields,especially in the miniaturized precision systems.
基金Project (No. 2004035223) supported by the Postdoctoral ScienceFoundation of China
文摘This paper presents a general analytical model of flexible isolation system for application to the installation of high-speed machines and lightweight structures. Piezoelectric stack actuators are employed in the model to achieve vibration control of flexible structures, and dynamic characteristics are also investigated. Mobility technique is used to derive the governing equations of the system. The power flow transmitted into the foundation is solved and considered as a cost function to achieve optimal control of vibration isolation. Some numerical simulations revealed that the analytical model is effective as piezoelectric stack actuators can achieve substantial vibration attenuation by selecting proper value of the input voltage.
基金Supported by Henan Province Science and Technology Key Project of China(Grant Nos.202102210081,202102210082)Fundamental Research Funds for Henan Province Colleges and Universities of China(Grant No.NSFRF140120)Doctor Foundation of Henan Polytechnic University(Grant No.B2012-101).
文摘When saving energy in a pneumatic system,the problem of energy losses is usually solved by reducing the air supply pressure.The power-matching method is applied to optimize the air-supply pressure of the pneumatic system,and the energy-saving effect is verified by experiments.First,the experimental platform of a pneumatic rotary actuator servo-control system is built,and the mechanism of the valve-controlled cylinder system is analyzed.Then,the output power characteristics and load characteristics of the system are derived,and their characteristic curves are drawn.The employed air compressor is considered as a constant-pressure source of a quantitative pump,and the power characteristic of the system is matched.The power source characteristic curve should envelope the output characteristic curve and load characteristic curve.The minimum gas supply pressure obtained by power matching represents the optimal gas supply pressure.The comparative experiments under two different gas supply pressure conditions show that the system under the optimal gas supply pressure can greatly reduce energy losses.
