Flexible piezoresistive pressure sensors can offer convenient detection of mechanical deformations for wearable electronics.Previous studies of flexible piezoresistive pressure sensors focus on the sensitivity but the...Flexible piezoresistive pressure sensors can offer convenient detection of mechanical deformations for wearable electronics.Previous studies of flexible piezoresistive pressure sensors focus on the sensitivity but the low-cost and self-powered sensors remain a challenge due to the deviation of resistance signal acquisition caused by thermoelectric voltage.Here,piezoresistive pressure sensors with ultralow Seebeck coefficient of-0.72μV/K based on carbon nanotubes(CNTs)/polyethyleneimine(PEI)/melamine(CPM)sponge are reported.Due to the diminished Seebeck effect,the CPM sponge pressure sensors successfully reduce the deviation to 18.75%and can keep stable sensitivity and resistance change under a very low working voltage and change temperature environment.The stable properties of the sensors make them successful to work for real-time sensing in self-powered wearable electronics.展开更多
研究黏性土中桩土界面的抗剪强度及其参数受超孔隙水压力影响的规律,对工程实践具有重要意义。利用自制的大型恒刚度直剪仪,完成了一系列不同界面粗糙度、不同试样含水率和不同剪切速率试验条件下的直剪试验,分析了在不同试验条件下超...研究黏性土中桩土界面的抗剪强度及其参数受超孔隙水压力影响的规律,对工程实践具有重要意义。利用自制的大型恒刚度直剪仪,完成了一系列不同界面粗糙度、不同试样含水率和不同剪切速率试验条件下的直剪试验,分析了在不同试验条件下超孔隙水压力变化规律,进而得到考虑超孔隙水压力的桩土界面抗剪强度及其参数的变化规律。研究结果表明:随着界面粗糙度等级提高,桩土界面超孔隙水压力减小,桩土界面抗剪强度、有效黏聚力和有效摩擦系数增加;随着含水率的增加,桩土界面超孔隙水压力增加,桩土界面抗剪强度降低,含水率对桩土界面抗剪强度的影响主要是改变了桩土界面的黏聚力,黏聚力先增大后减小,对摩擦系数的影响较小;特定试验条件下,随着剪切速率的增加,桩土界面超孔隙水压力增加,桩土界面抗剪强度降低,桩土界面黏聚力先增大后又减小,变化幅度不超过2 k Pa,对摩擦系数的影响较小。因此,桩土界面抗剪强度及其参数是界面粗糙度、试样含水率和剪切速率变化引起超孔隙水压力变化共同影响的结果,试验结果可供相关工程设计参考。展开更多
为了消除环境温度对硅压阻式传感器输出的影响,大幅提升硅压阻式传感器的测量精度,将传感器芯片与热源和测温原件封装在一起,通过控制加热的方式使传感器工作在恒定50℃的环境中,对传感器进行线性标定和测试。结果显示:在-45~45℃环境下...为了消除环境温度对硅压阻式传感器输出的影响,大幅提升硅压阻式传感器的测量精度,将传感器芯片与热源和测温原件封装在一起,通过控制加热的方式使传感器工作在恒定50℃的环境中,对传感器进行线性标定和测试。结果显示:在-45~45℃环境下,600~1 100 h Pa量程内气压传感器的测量误差小于0.3 h Pa。展开更多
基金Fundamental Research Fund for the Central Universities,China(Nos.2232020G-01 and 19D110106)Young Elite Scientists Sponsorship Program by China Association for Science and Technology,China(No.2017QNRC001)Graduate Student Innovation Fund of Donghua University,China(No.20D310111)。
文摘Flexible piezoresistive pressure sensors can offer convenient detection of mechanical deformations for wearable electronics.Previous studies of flexible piezoresistive pressure sensors focus on the sensitivity but the low-cost and self-powered sensors remain a challenge due to the deviation of resistance signal acquisition caused by thermoelectric voltage.Here,piezoresistive pressure sensors with ultralow Seebeck coefficient of-0.72μV/K based on carbon nanotubes(CNTs)/polyethyleneimine(PEI)/melamine(CPM)sponge are reported.Due to the diminished Seebeck effect,the CPM sponge pressure sensors successfully reduce the deviation to 18.75%and can keep stable sensitivity and resistance change under a very low working voltage and change temperature environment.The stable properties of the sensors make them successful to work for real-time sensing in self-powered wearable electronics.
文摘研究黏性土中桩土界面的抗剪强度及其参数受超孔隙水压力影响的规律,对工程实践具有重要意义。利用自制的大型恒刚度直剪仪,完成了一系列不同界面粗糙度、不同试样含水率和不同剪切速率试验条件下的直剪试验,分析了在不同试验条件下超孔隙水压力变化规律,进而得到考虑超孔隙水压力的桩土界面抗剪强度及其参数的变化规律。研究结果表明:随着界面粗糙度等级提高,桩土界面超孔隙水压力减小,桩土界面抗剪强度、有效黏聚力和有效摩擦系数增加;随着含水率的增加,桩土界面超孔隙水压力增加,桩土界面抗剪强度降低,含水率对桩土界面抗剪强度的影响主要是改变了桩土界面的黏聚力,黏聚力先增大后减小,对摩擦系数的影响较小;特定试验条件下,随着剪切速率的增加,桩土界面超孔隙水压力增加,桩土界面抗剪强度降低,桩土界面黏聚力先增大后又减小,变化幅度不超过2 k Pa,对摩擦系数的影响较小。因此,桩土界面抗剪强度及其参数是界面粗糙度、试样含水率和剪切速率变化引起超孔隙水压力变化共同影响的结果,试验结果可供相关工程设计参考。
文摘为了消除环境温度对硅压阻式传感器输出的影响,大幅提升硅压阻式传感器的测量精度,将传感器芯片与热源和测温原件封装在一起,通过控制加热的方式使传感器工作在恒定50℃的环境中,对传感器进行线性标定和测试。结果显示:在-45~45℃环境下,600~1 100 h Pa量程内气压传感器的测量误差小于0.3 h Pa。
