Rollover and jack-knifing of tractor semi-trailer are serious threats for vehicle safety, and accordingly active safety technologies have been widely used to reduce or prevent the occurrence of such accidents. However...Rollover and jack-knifing of tractor semi-trailer are serious threats for vehicle safety, and accordingly active safety technologies have been widely used to reduce or prevent the occurrence of such accidents. However, currently tractor semi-trailer stability control is generally only a single hazardous condition (rollover or jack-knifing) control, it is difficult to ensure the vehicle comprehensive stability of various dangerous conditions. The main objective of this study is to introduce a multi-objective stability control algorithm which can improve the vehicle stability of a tractor semi-trailer by using differential braking. A vehicle controller is designed to minimize the likelihood of rollover and jack-knifing. First a linear vehicle model of tractor semi-trailer is constructed. Then an optimal yaw control for tractor using differential braking is applied to minimize the yaw rate and lateral acceleration deviation of tractor, as well as the hitch articulation angle of tractor semi-trailer, so as to improve the vehicle stability. Second a braking scheme and variable structure control with sliding mode control are introduced in order to achieve the best braking effect. Last Fishhook maneuver is introduced to the active safety simulation and the active control system effect verification. The simulation results show that multi-objective stability control algorithm of semi-trailer could improve the vehicle stability significantly during the transient maneuvers. The proposed multi-objective stability control algorithm is effective to prevent the vehicle rollover and jackknifing.展开更多
In order to solve internal logistics problems of iron and steel works,such as low transportation efficiency of vehicles and high transportation cost,the production process and traditional transportation style of iron ...In order to solve internal logistics problems of iron and steel works,such as low transportation efficiency of vehicles and high transportation cost,the production process and traditional transportation style of iron and steel works were introduced.The internal transport tasks of iron and steel works were grouped based on cluster analysis according to demand time of the transportation.An improved vehicle scheduling model of semi-trailer swap transport among loading nodes and unloading nodes in one task group was set up.The algorithm was designed to solve the vehicle routing problem with simultaneous pick-up and delivery(VRPSPD) problem based on semi-trailer swap transport.A solving program was written by MATLAB software and the method to figure out the optimal path of each grouping was obtained.The dropping and pulling transportation plan of the tractor was designed.And an example of semi-trailer swap transport in iron and steel works was given.The results indicate that semi-trailer swap transport can decrease the numbers of vehicles and drivers by 54.5% and 88.6% respectively compared with decentralized scheduling in iron and steel works,and the total distance traveled reduces by 43.5%.The semi-trailer swap transport can help the iron and steel works develop the production in intension.展开更多
In order to evaluate two different schemes＇ structural dynamic characters, dynamic response analysis of a commercial truck＇s main chassis frames is carried out. On the basis of correlation study between the tested a...In order to evaluate two different schemes＇ structural dynamic characters, dynamic response analysis of a commercial truck＇s main chassis frames is carried out. On the basis of correlation study between the tested and calculated modal results, the assembled frames＇ finite element analysis （FEA） models with sufficient precision are built up. Random response analysis in frequency domain is carried out with these FEA models, RMS values of yon Mises and main principle stresses of these two frames are obtained. It shows that the analysis resuits of the distributing tendency and concrete value ranges are coincident very well with test results. And from the results, it could be concluded that frames of scheme A endures relative better loading conditions and should be adopted as the final scheme.展开更多
It is different for the liquid tank semi-trailer to keep roll stability during turning or emergency voidance,and that may cause serious accidents.Although the scholars did lots of research about the roll stability of ...It is different for the liquid tank semi-trailer to keep roll stability during turning or emergency voidance,and that may cause serious accidents.Although the scholars did lots of research about the roll stability of liquid tank semi-trailer in theory by calculating and simulation,how to make an effective early warning of rollover is still unsolved in practice.The reasons include the complex driving condition and the difficulty of the vehicle parameter obtaining.The feasible method used currently is evaluating the roll stability of a liquid tank semi-trailer by the lateral acceleration or the attitude of the vehicle.Unfortunately,the lateral acceleration is more useful for sideslip rather than rollover,and the attitude is a kind of posterior way,which means it is hard to take measures to cope with the rollover accident when the attitude exceeds the safety threshold.Considering the movement of the vehicle is totally caused by the wheel force,the rollover could also be predicted by the changing of the wheel force.Therefore,in this paper,we developed a method to analyze the roll stability by the vertical wheel force.A thorough experiment environment is established,and the effectiveness of the proposed method is verified in real driving conditions.展开更多
基金supported by Open Research Fund of State Key Laboratory of Automobile Dynamics Simulation, China (Grant No. 20101103)National Natural Science Foundation of China (Grant No. 51075176)
文摘Rollover and jack-knifing of tractor semi-trailer are serious threats for vehicle safety, and accordingly active safety technologies have been widely used to reduce or prevent the occurrence of such accidents. However, currently tractor semi-trailer stability control is generally only a single hazardous condition (rollover or jack-knifing) control, it is difficult to ensure the vehicle comprehensive stability of various dangerous conditions. The main objective of this study is to introduce a multi-objective stability control algorithm which can improve the vehicle stability of a tractor semi-trailer by using differential braking. A vehicle controller is designed to minimize the likelihood of rollover and jack-knifing. First a linear vehicle model of tractor semi-trailer is constructed. Then an optimal yaw control for tractor using differential braking is applied to minimize the yaw rate and lateral acceleration deviation of tractor, as well as the hitch articulation angle of tractor semi-trailer, so as to improve the vehicle stability. Second a braking scheme and variable structure control with sliding mode control are introduced in order to achieve the best braking effect. Last Fishhook maneuver is introduced to the active safety simulation and the active control system effect verification. The simulation results show that multi-objective stability control algorithm of semi-trailer could improve the vehicle stability significantly during the transient maneuvers. The proposed multi-objective stability control algorithm is effective to prevent the vehicle rollover and jackknifing.
基金Project(70671108) supported by the National Natural Science Foundation of China
文摘In order to solve internal logistics problems of iron and steel works,such as low transportation efficiency of vehicles and high transportation cost,the production process and traditional transportation style of iron and steel works were introduced.The internal transport tasks of iron and steel works were grouped based on cluster analysis according to demand time of the transportation.An improved vehicle scheduling model of semi-trailer swap transport among loading nodes and unloading nodes in one task group was set up.The algorithm was designed to solve the vehicle routing problem with simultaneous pick-up and delivery(VRPSPD) problem based on semi-trailer swap transport.A solving program was written by MATLAB software and the method to figure out the optimal path of each grouping was obtained.The dropping and pulling transportation plan of the tractor was designed.And an example of semi-trailer swap transport in iron and steel works was given.The results indicate that semi-trailer swap transport can decrease the numbers of vehicles and drivers by 54.5% and 88.6% respectively compared with decentralized scheduling in iron and steel works,and the total distance traveled reduces by 43.5%.The semi-trailer swap transport can help the iron and steel works develop the production in intension.
文摘In order to evaluate two different schemes＇ structural dynamic characters, dynamic response analysis of a commercial truck＇s main chassis frames is carried out. On the basis of correlation study between the tested and calculated modal results, the assembled frames＇ finite element analysis （FEA） models with sufficient precision are built up. Random response analysis in frequency domain is carried out with these FEA models, RMS values of yon Mises and main principle stresses of these two frames are obtained. It shows that the analysis resuits of the distributing tendency and concrete value ranges are coincident very well with test results. And from the results, it could be concluded that frames of scheme A endures relative better loading conditions and should be adopted as the final scheme.
基金This work was supported by the Suzhou Key industrial technology innovation project SYG202031.
文摘It is different for the liquid tank semi-trailer to keep roll stability during turning or emergency voidance,and that may cause serious accidents.Although the scholars did lots of research about the roll stability of liquid tank semi-trailer in theory by calculating and simulation,how to make an effective early warning of rollover is still unsolved in practice.The reasons include the complex driving condition and the difficulty of the vehicle parameter obtaining.The feasible method used currently is evaluating the roll stability of a liquid tank semi-trailer by the lateral acceleration or the attitude of the vehicle.Unfortunately,the lateral acceleration is more useful for sideslip rather than rollover,and the attitude is a kind of posterior way,which means it is hard to take measures to cope with the rollover accident when the attitude exceeds the safety threshold.Considering the movement of the vehicle is totally caused by the wheel force,the rollover could also be predicted by the changing of the wheel force.Therefore,in this paper,we developed a method to analyze the roll stability by the vertical wheel force.A thorough experiment environment is established,and the effectiveness of the proposed method is verified in real driving conditions.
