Al-Cr-pillared montmorillonite was synthesized by using bentonite and Al-Cr pillaring solutions as starting materials.The basal spacing and specific surface areas of the materials were significantly increased relative...Al-Cr-pillared montmorillonite was synthesized by using bentonite and Al-Cr pillaring solutions as starting materials.The basal spacing and specific surface areas of the materials were significantly increased relative to those of untreated clays.When the Al/Cr molar ratio(R) was 0.10,the d(001) value and specific surface area of pillared montmorillonite were 1.9194 nm and 165.7 m2 g -1,respectively.Thermal stability of the materials was determined using calcined tests and X-ray diffraction (XRD) analysis.The materials formed at different R(0.05;0.10;0.15;0.25) exhibit a high thermal stability at 300℃,especially at initial R=0.10,the basal interlayer spacing of materials is stabilized at 1.7313 nm after calcined at 500℃ for 2 h.Adsorption behavior of the materials was studied by adsorption experiments.The results show that the Al-Cr-pillared montmorillonites exhibit much stronger adsorption capacity on Cr 6+ in aqueous solution than untreated clays do.展开更多
Al-pillared interlayered montmorillonite (Al-PILM) was prepared using the artificial Na-montmorillonite from the Qingfengshan bentonite mine as a starting material mixed with Al-pillaring solutions.The microstructure ...Al-pillared interlayered montmorillonite (Al-PILM) was prepared using the artificial Na-montmorillonite from the Qingfengshan bentonite mine as a starting material mixed with Al-pillaring solutions.The microstructure of the materials was studied by an X-ray powder diffractometer and a Fourier transform infrared (FTIR) spectrometer.The results indicated that the basal spacing [d(001) value] of the materials was increased significantly to 1.9194 nm relative to Na-montmorillonite (1.2182 nm).After calcined for 2 h at 300℃,the basal spacing was stabilized at 1.8394 nm and the layered structure of the materials was not destroyed.Thermal analysis was conducted by a thermal gravimetry and differential thermal analysis (TG-DTA) instrument,it showed that Al-PILM lost physically adsorbed water below 230.6℃ and water formed by dehydroxylation of the pillars at around 497.1℃, with a peak of the phase transformation at 903.0℃.展开更多
Al-Mn-pillared montmorillonite(AMPM) was prepared by using the artificial Na-montmoril-lonite from the Qingfengshan bentonite mine as starting materials mixed with Al-Mn pillaring solutions at different Al/Mn molar ra...Al-Mn-pillared montmorillonite(AMPM) was prepared by using the artificial Na-montmoril-lonite from the Qingfengshan bentonite mine as starting materials mixed with Al-Mn pillaring solutions at different Al/Mn molar ratios (R). The basal spacing and specific surface area of the materials were increased significantly compared with untreated clays. When R = 0.5, the d (001) value and specific surface area of pillared montmoril-lonite were 1.8987 ran and 146.01 m2 g-1, respectively. The thermal stability was determined using calcined tests , X-ray diffraction ( XRD ) analysis, thermal gravimetry and differential thermal analysis (TG - DTA). The materials formed at initial R = 0.5 exhibited a high stability, the basal interlayer spacing was stabilized at 1.7859 nm after calcined for 2 h at 300℃. The adsorption behavior of the materials was studied by adsorption experiments. The results show the AMPM and calcined Al-Mn-pillared montmorillonite ( CAMPM) exhibit a strong capacity of adsorbing the Zn(Ⅱ) in aqueous solution at pH 10.0.展开更多
文摘Al-Cr-pillared montmorillonite was synthesized by using bentonite and Al-Cr pillaring solutions as starting materials.The basal spacing and specific surface areas of the materials were significantly increased relative to those of untreated clays.When the Al/Cr molar ratio(R) was 0.10,the d(001) value and specific surface area of pillared montmorillonite were 1.9194 nm and 165.7 m2 g -1,respectively.Thermal stability of the materials was determined using calcined tests and X-ray diffraction (XRD) analysis.The materials formed at different R(0.05;0.10;0.15;0.25) exhibit a high thermal stability at 300℃,especially at initial R=0.10,the basal interlayer spacing of materials is stabilized at 1.7313 nm after calcined at 500℃ for 2 h.Adsorption behavior of the materials was studied by adsorption experiments.The results show that the Al-Cr-pillared montmorillonites exhibit much stronger adsorption capacity on Cr 6+ in aqueous solution than untreated clays do.
文摘Al-pillared interlayered montmorillonite (Al-PILM) was prepared using the artificial Na-montmorillonite from the Qingfengshan bentonite mine as a starting material mixed with Al-pillaring solutions.The microstructure of the materials was studied by an X-ray powder diffractometer and a Fourier transform infrared (FTIR) spectrometer.The results indicated that the basal spacing [d(001) value] of the materials was increased significantly to 1.9194 nm relative to Na-montmorillonite (1.2182 nm).After calcined for 2 h at 300℃,the basal spacing was stabilized at 1.8394 nm and the layered structure of the materials was not destroyed.Thermal analysis was conducted by a thermal gravimetry and differential thermal analysis (TG-DTA) instrument,it showed that Al-PILM lost physically adsorbed water below 230.6℃ and water formed by dehydroxylation of the pillars at around 497.1℃, with a peak of the phase transformation at 903.0℃.
基金Supported by Foundation for University Key Teacher by the Ministry of Education
文摘Al-Mn-pillared montmorillonite(AMPM) was prepared by using the artificial Na-montmoril-lonite from the Qingfengshan bentonite mine as starting materials mixed with Al-Mn pillaring solutions at different Al/Mn molar ratios (R). The basal spacing and specific surface area of the materials were increased significantly compared with untreated clays. When R = 0.5, the d (001) value and specific surface area of pillared montmoril-lonite were 1.8987 ran and 146.01 m2 g-1, respectively. The thermal stability was determined using calcined tests , X-ray diffraction ( XRD ) analysis, thermal gravimetry and differential thermal analysis (TG - DTA). The materials formed at initial R = 0.5 exhibited a high stability, the basal interlayer spacing was stabilized at 1.7859 nm after calcined for 2 h at 300℃. The adsorption behavior of the materials was studied by adsorption experiments. The results show the AMPM and calcined Al-Mn-pillared montmorillonite ( CAMPM) exhibit a strong capacity of adsorbing the Zn(Ⅱ) in aqueous solution at pH 10.0.
