A New Configuration for Planar Magnetic Elements to Reduce Capacitive Couplings

This paper presents an analysis of planar magnetic element configurations in order to reduce capacitive couplings between the windings. The capacitive couplings between layers of planar magnetic elements introduce a stray capacitor which can conduct high frequency currents when high dv/dt voltage is applied. High frequency current may cause electromagnetic interference （EMI） and harmonic problems. The investigation and simulation results, both 2D and 3D Finite Element （FE） show the effect of shifting the planar layers in reduction of the capacitive couplings. The simulation results are compared with test results to validate the proposition.

A review of high frequency resonant DC-DC power converters:Topologies and planar magnetic technologies

With the development of high frequency resonant DC-DC power converters,the system efficiency,power density and dynamic characteristics have been significantly improved.High frequency resonant DC-DC converters have been applied in DC grid,renewable energy,transportation,aerospace,point-of-load(POL)power supply and many other fields.Under high switching frequencies,switching loss and magnetic loss are the main concerns;thus,the resonant topology and planar magnetic are two key technologies to reduce loss.This review compares different resonant topologies and analyzes the advantages and disadvantages respectively,such as LLC circuit,dual active bridge(DAB)circuit,and other high order resonant circuits.For planar magnetic components,optimal winding structures,modeling methods and integration methods are thoroughly surveyed.With corresponding topics,the opportunities and challenges in the future development are summarized,which mainly focus on the characteristics of wide bandgap devices,such as the dynamic resistance,output capacitance loss and also the integrated module.This review can be a helpful guidance when designing high frequency resonant DC-DC converters.

Overview of Planar Magnetics for High-frequency Resonant Converters

With the continuous development of power supplies toward miniaturization,light weights,and high levels of integration,research on high-frequency resonant conversion based on planar magnetics is becoming extensive.Combining the soft-switching characteristics of resonant converters with those of wide bandgap devices,the switching frequency can be increase to the MHz range,and the power density of the entire system can be improved considerably.However,higher switching frequencies impose new requirements for the structural design,loss distribution,and common mode(CM)noise suppression of passive magnetic components.Herein,a thorough survey of the-state-of-the-art of planar magnetics in high-frequency resonant converters is conducted.Printed circuit board winding-based planar magnetics,magnetic integration,and power-loss optimization strategies are summarized in detail.Suppression methods for CM noise in high-frequency planar magnetics are also clarified and discussed.An insight view into the future development of planar magnetics for high-frequency resonant converters is presented.

Planar Magnetic Integrated Harmonic Filter with Reduced EMI Noise

Through the analysis of the circuit structure and electromagnetic interference(EMI)conduction path,the structure of the traditional harmonic filter is optimized so that it has the ability to suppress EMI.Using the structure of planar magnetic integration not only ensures the basic harmonic suppression ability of the harmonic filter,but also improves the EMI suppression effect.With a single-phase voltage source 500-W SiC inverter as the platform,the feasibility and effectiveness of the design scheme are experimentally verified.The results indicated that the planar magnetic integrated harmonic EMI filter satisfies the design requirements.Additionally,the proposed planar magnetic integration scheme can significantly reduce the volume and weight of the filter and increase the power density of the entire system.

Method of measuring rotation speed of high spinning projectile based on plane magnetic induction coil

For the test of rotation speed of high spinning projectile, the general formula of the motional electromotive force （MEMF） of planar magnetic induction coil （PMIC） is derived in case of 3D rotation in a stable magnetic field. Under a reasona-ble assumption, the MEMF of PMIC is simplified after the aforementioned general formula is used to calculate high spinning PMIC in the geomagnetic field environment. The determination approach of half-cycle is discussed and the method of rotation speed test is studied, and a test is conducted in the paper. The rotation speed curve obtained by the approach in this paper is consistent with the curve by telemetry.