Planar Hall Effect in the Charge-Density-Wave Bi_(2)Rh_(3)Se_(2)

We systematically investigate in-plane transport properties of ternary chalcogenideBi_(2)Rh_(3)Se_(2).Upon rotating the magnetic field within the plane of the sample, one can distinctly detect the presence of both planar Hall resistance and anisotropic longitudinal resistance, and the phenomena appeared are precisely described by the theoretical formulation of the planar Hall effect (PHE). In addition, anisotropic orbital magnetoresistance rather than topologically nontrivial chiral anomalies dominates the PHE in Bi_(2)Rh_(3)Se_(2). The finding not only provides another platform for understanding the mechanism of PHE, but could also be beneficial for future planar Hall sensors based on two-dimensional materials.

Angular and planar transport properties of antiferromagnetic V_(5)S_(8)

Systemically angular and planar transport investigations are performed in layered antiferromagnetic(AF)V_(5)S_(8).In this AF system,obvious anomalous Hall effect(AHE)is observed with a large Hall angle of 0.1 compared to that in ferromagnetic(FM)system.It can persist to the temperatures above AF transition and exhibit strong angular field dependence.The phase diagram reveals various magnetic states by rotating the applied field.By analyzing the anisotropic transport behavior,magnon contributions are revealed and exhibit obvious angular dependence with a spin-flop vanishing line.The observed prominent planar Hall effect and anisotropic magnetoresisitivity exhibit two-fold systematical angular dependent oscillations.These behaviors are attributed to the scattering from spin–orbital coupling instead of nontrivial topological origin.Our results reveal anisotropic interactions of magnetism and electron in V5S8,suggesting potential opportunities for the AF spintronic sensor and devices.

An approach for determination of lateral limit angle in kinematic planar sliding analysis for rock slopes

Planar sliding is one of the frequently observed types of failure in rock slopes.Kinematic analysis is a classic and widely used method to examine the potential failure modes in rock masses.The accuracy of planar sliding kinematic analysis is significantly influenced by the value assigned to the lateral limit angleγlim.However,the assignment ofγlim is currently used generally based on an empirical criterion.This study aims to propose an approach for determining the value ofγlim in deterministic and probabilistic kinematic planar sliding analysis.A new perspective is presented to reveal thatγlim essentially influences the probability of forming a potential planar sliding block.The procedure to calculate this probability is introduced using the block theory method.It is found that the probability is correlated with the number of discontinuity sets presented in rock masses.Thus,different values ofγlim for rock masses with different sets of discontinuities are recommended in both probabilistic and deterministic planar sliding kinematic analyses;whereas a fixed value ofγlim is commonly assigned to different types of rock masses in traditional method.Finally,an engineering case was used to compare the proposed and traditional kinematic analysis methods.The error rates of the traditional method vary from 45%to 119%,while that of the proposed method ranges between 1%and 17%.Therefore,it is likely that the proposed method is superior to the traditional one.

Nonlinear dynamic modeling of planar moving Timoshenko beam considering non-rigid non-elastic axial effects

Due to the importance of vibration effects on the functional accuracy of mechanical systems,this research aims to develop a precise model of a nonlinearly vibrating single-link mobile flexible manipulator.The manipulator consists of an elastic arm,a rotary motor,and a rigid carrier,and undergoes general in-plane rigid body motion along with elastic transverse deformation.To accurately model the elastic behavior,Timoshenko’s beam theory is used to describe the flexible arm,which accounts for rotary inertia and shear deformation effects.By applying Newton’s second law,the nonlinear governing equations of motion for the manipulator are derived as a coupled system of ordinary differential equations(ODEs)and partial differential equations(PDEs).Then,the assumed mode method(AMM)is used to solve this nonlinear system of governing equations with appropriate shape functions.The assumed modes can be obtained after solving the characteristic equation of a Timoshenko beam with clamped boundary conditions at one end and an attached mass/inertia at the other.In addition,the effect of the transverse vibration of the inextensible arm on its axial behavior is investigated.Despite the axial rigidity,the effect makes the rigid body dynamics invalid for the axial behavior of the arm.Finally,numerical simulations are conducted to evaluate the performance of the developed model,and the results are compared with those obtained by the finite element approach.The comparison confirms the validity of the proposed dynamic model for the system.According to the mentioned features,this model can be reliable for investigating the system’s vibrational behavior and implementing vibration control algorithms.

On the (Δ + 2)-Total-Colorability of Planar Graphs with 7-Cycles Containing at Most Two Chords

The Total Coloring Conjecture (TCC) proposes that every simple graph G is (Δ + 2)-totally-colorable, where Δ is the maximum degree of G. For planar graph, TCC is open only in case Δ = 6. In this paper, we prove that TCC holds for planar graph with Δ = 6 and every 7-cycle contains at most two chords.

Pythagorean Neutrosophic Planar Graphs with an Application in Decision-Making

Graph theory has a significant impact and is crucial in the structure of many real-life situations.To simulate uncertainty and ambiguity,many extensions of graph theoretical notions were created.Planar graphs play a vital role in modelling which has the property of non-crossing edges.Although crossing edges benefit,they have some drawbacks,which paved the way for the introduction of planar graphs.The overall purpose of the study is to contribute to the conceptual development of the Pythagorean Neutrosophic graph.The basic methodology of our research is the incorporation of the analogous concepts of planar graphs in the Pythagorean Neutrosophic graphs.The significant finding of our research is the introduction of Pythagorean Neutrosophic Planar graphs,a conceptual blending of Pythagorean Neutro-sophic and Planar graphs.The idea of Pythagorean Neutrosophic multigraphs and dual graphs are also introduced to deal with the ambiguous situations.This paper investigates the Pythagorean Neutrosophic planar values,which form the edges of the Pythagorean neutrosophic graphs.The concept of Pythagorean Neutrosophic dual graphs,isomorphism,co-weak and weak isomorphism have also been explored for Pythagorean Neutrosophic planar graphs.A decision-making algorithm was proposed with a numerical illustra-tion by using the Pythagorean Neutrosophic fuzzy graph.

Enhancing the stability of planar perovskite solar cells by green and inexpensive cellulose acetate butyrate

Although the efficiency of organic–inorganic hybrid halide perovskite solar cells has been improved rapidly, the intrinsic instability of perovskite materials restricts their commercial application. Here, an eco-friendly and low-cost organic polymer, cellulose acetate butyrate(CAB), was introduced to the grain boundaries and surfaces of perovskite, resulting in a high-quality and low-defect perovskite film with a nearly tenfold improvement in carrier lifetime. More importantly, the CAB-treated perovskite films have a well-matched energy level with the charge transport layers, thus suppressing carrier nonradiative recombination and carrier accumulation. As a result, the optimized CAB-based device achieved a champion efficiency of 21.5% compared to the control device(18.2%). Since the ester group in CAB bonds with Pb in perovskite, and the H and O in the hydroxyl group bond with the I and organic cations in perovskite,respectively, it will contribute to superior stability under heat, high humidity, and light soaking conditions. After aging under 35% humidity(relative humidity, RH) for 3300 h, the optimized device can still maintain more than 90% of the initial efficiency;it can also retain more than 90% of the initial efficiency after aging at 65 ℃, 65% RH, or light(AM 1.5G) for 500 h. This simple optimization strategy for perovskite stability could facilitate the commercial application of perovskite solar cells.

Recent progress on the planar Hall effect in quantum materials

The planar Hall effect(PHE),which originates from anisotropic magnetoresistance,presents a qualitative and simple approach to characterize electronic structures of quantum materials by applying an in-plane rotating magnetic field to induce identical oscillations in both longitudinal and transverse resistances.In this review,we focus on the recent research on the PHE in various quantum materials,including ferromagnetic materials,topological insulators,Weyl semimetals,and orbital anisotropic matters.Firstly,we briefly introduce the family of Hall effect and give a basic deduction of PHE formula with the second-order resistance tensor,showing the mechanism of the characteristicπ-period oscillation in trigonometric function form with aπ/4 phase delay between the longitudinal and transverse resistances.Then,we will introduce the four main mechanisms to realize PHE in quantum materials.After that,the origin of the anomalous planar Hall effect(APHE)results,of which the curve shapes deviate from that of PHE,will be reviewed and discussed.Finally,the challenges and prospects for this field of study are discussed.

Artificial Magnetic Conductor as Planar Antenna for 5G Evolution

A 5G wireless system requests a high-performance compact antenna device.This research work aims to report the characterization and verification of the artificial magnetic conductor(AMC)metamaterial for a high-gain planar antenna.The configuration is formed by a double-side structure on an intrinsic dielectric slab.The 2-D periodic pattern as an impedance surface is mounted on the top surface,whereas at the bottom surface the ground plane with an inductive narrow aperture source is embedded.The characteristic of the resonant transmission is illustrated based on the electromagnetic virtual object of the AMC resonant structure to reveal the unique property of a magnetic material response.The characteristics of the AMC metamaterial and the planar antenna synthesis are investigated and verified by experiment using a low-cost FR4 dielectric material.The directional antenna gain is obviously enhanced by guiding a primary field radiation.The loss effect in a dielectric slab is essentially studied having an influence on antenna radiation.The verification shows a peak of the antenna gain around 9.7 dB at broadside which is improved by 6.2 dB in comparison with the primary aperture antenna without the AMC structure.The thin antenna profile ofλ/37.5 is achieved at 10GHz for 5Gevolution.The emission property in an AMCstructure herein contributes to the development of a lowprofile and high-gain planar antenna for a compact wireless component.

Unveiling the planar deformation mechanisms for improved formability in pre-twinned AZ31 Mg alloy sheet at warm temperature

To investigate the role of pre-twins in Mg alloy sheets during warm planar deformation, the stretch forming is conducted at 200 ℃. Results suggest the formability of the pre-twinned AZ31 Mg alloy sheet is enhanced to 11.30 mm. The mechanisms for the improved formability and the deformation behaviors during the planar stretch forming are systematically investigated based on the planar stress states. The Schmid factor for deformation mechanisms are calculated, the results reveal that planar stress states extremely affect the Schmid factor for {10-12}twinning. The detwinning is activated and the prismatic slip is enhanced in the pre-twinned sheet, especially under the planar extension stress state in the outer region. Consequently, the thickness-direction strain is accommodated better. The dynamic recrystallization(DRX) type is continuous DRX(CDRX) regardless of the planar stress state. However, the CDRX degree is greater under the planar extension stress state.Some twin lattices deviate from the perfect {10-12} twinning relation due to the planar compression stress state and the CDRX. The basal texture is weakened when the planar stress state tends to change the texture components.

Planar InAlAs/InGaAs avalanche photodiode with 360 GHz gain×bandwidth product

This paper describes a guardring-free planar InAlAs/InGaAs avalanche photodiode(APD)by computational simulations and experimental results.The APD adopts the structure of separate absorption,charge,and multiplication(SACM)with top-illuminated.Computational simulations demonstrate how edge breakdown effect is suppressed in the guardringfree structure.The fabricated APD experiment results show that it can obtain a very low dark current while achieving a high gain×bandwidth(GB)product.The dark current is 3 nA at 0.9Vb r,and the unit responsivity is 0.4 A/W.The maximum3 dB bandwidth of 24 GHz and a GB product of 360 GHz are achieved for the fabricated APD operating at 1.55μm.

Enhanced topological superconductivity in an asymmetrical planar Josephson junction

As a platform for holding Majorana zero models(MZMs),the two-dimensional planar topological Josephson junction that can be used as carriers for topological quantum computing faces some challenges.One is a combination of mirror and time-reversal symmetries may make the system hold multiple pairs of MZMs.The other is that a soft gap dominated by a large momentum occurs in a clean system.To solve these problems,asymmetric junction can be introduced.Breaking this symmetry changes the symmetry class from class BDI to class D,and only a single pair of MZMs can be left at the boundary of the system.We numerically study four cases that create an asymmetric system and find out different superconducting pairing potential,different coupling coefficients between two-dimensional electron gases(2DEGs)and two superconducting bulks,different widths of two superconducting bulks make the gap of the system decrease at the optimal value,but make the gap at the minimum value increases.And the zigzag-shape quasi-one-dimensional junction eliminates the large momentum parallel to the junction and enhances the gap at the large momentum.However,the zigzag-shape junction cannot increase the gap at the region of multiple pairs of MZMs in a symmetric system.We show that by combining zigzag-shape junction with different coupling coefficients,the system can maintain a large gap(≈0.2△)in a wide region of the parameter space.

Crossing Limit Cycles of Planar Piecewise Hamiltonian Systems with Linear Centers Separated by Two Parallel Straight Lines

In this paper, we have studied several classes of planar piecewise Hamiltonian systems with three zones separated by two parallel straight lines. Firstly, we give the maximal number of limit cycles in these classes of systems with a center in two zones and without equilibrium points in the other zone (or with a center in one zone and without equilibrium points in the other zones). In addition, we also give examples to illustrate that it can reach the maximal number.

Modulating J-V hysteresis of planar perovskite solar cells and mini-modules via work function engineering

Commercialization of perovskite solar cells(PSCs) requires the development of high-efficiency devices with none current density-voltage(J-V) hysteresis. Here, electron transport layers(ETLs) with gradual change in work function(WF) are successfully fabricated and employed as an ideal model to investigate the energy barriers, charge transfer and recombination kinetics at ETL/perovskite interface. The energy barrier for electron injection existing at ETL/perovskite is directly assessed by surface photovoltage microscopy, and the results demonstrate the tunable barriers have significant impact on the J-V hysteresis and performance of PSCs. By work function engineering of ETL, PSCs exhibit PCEs over 21% with negligible hysteresis. These results provide a critical understanding of the origin reason for hysteresis effect in planar PSCs, and clear reveal that the J-V hysteresis can be effectively suppressed by carefully tuning the interface features in PSCs. By extending this strategy to a modified formamidinium-cesium-rubidium(FA-Cs-Rb) perovskite system, the PCEs are further boosted to 24.18%. Moreover, 5 cm × 5 cm perovskite mini-modules are also fabricated with an impressive efficiency of 20.07%, demonstrating compatibility and effectiveness of our strategy on upscaled devices.

Simulation and Modeling of Common Mode EMI Noise in Planar Transformers

The transformer is the key circuit component of the common-mode noise current when an isolated converter is working.The highfrequency characteristics of the transformer have an important influence on the common-mode noise of the converter.Traditionally,the measurement method is used for transformer modeling,and a single lumped device is used to establish the transformer model,which cannot be predicted in the transformer design stage.Based on the transformer common-mode noise transmission mechanism,this paper derives the transformer common-mode equivalent capacitance under ideal conditions.According to the principle of experimental measurement of the network analyzer,the electromagnetic field finite element simulation software three-dimensional(3D)modeling and simulation method is used to obtain the two-port parameters of the transformer,extract the high-frequency parameters of the transformer,and establish its electromagnetic compatibility equivalent circuit model.Finally,an experimental prototype is used to verify the correctness of the model by comparing the experimental measurement results with the simulation prediction results.

平面端射圆极化天线进展综述

全面总结了平面端射圆极化天线的发展历程和重要突破。以正交磁偶极子和平面互补振子两大核心工作原理为主线,深入剖析平面端射圆极化天线的一般性设计方法,阐明其形态演变规律,详细介绍了平面端射圆极化天线的宽带设计技术、波束调控技术以及高增益设计技术等研究现状,最后探讨平面端射圆极化天线的可能发展方向,用于指导该领域的科学研究和工程设计。

类氦C离子诱发不同金属厚靶原子的K-X射线

利用中国原子能科学研究院HI-13MV串列加速器上提供的动能为15—55 MeV的类氦C离子分别轰击Fe,Ni,Nb和Mo金属厚靶,采用HpGe探测器测量了K-X射线,获得了相应的K-X射线的发射截面.本文中由于各个靶原子外壳层电离度的不同,类氦C离子与Fe,Ni靶原子相互作用发射的K_(β)与K_(α)X射线的分支强度比随入射离子动能增加而减小,而Nb,Mo靶原子发射的K-X射线分支强度比变化不明显.利用厚靶截面公式计算了靶原子K-X射线的发射截面,并与不同的理论模型及质子的结果进行了对比.结果表明随类氦C离子动能的增大,Fe,Ni靶原子发射的K_(β)与K_(α)X射线的总产生截面与考虑多电离的两体碰撞近似修正模型最为符合Nb,Mo靶原子发射的K_(β)与K_(α)X射线的总产生截面与平面波恩近似模型的理论值最为接近.质子与单核子C离子能量相同时,质子比类氦C离子激发不同靶的K-X射线产生截面约小3个数量级.

注塑件机器视觉缺陷检测的几何矫正方法研究

针对多面体注塑零件在机器视觉缺陷检测中的零件图像几何形变问题,提出了基于几何光学原理的矫正算法。在拍摄定位误差不大于1 mm的条件下,所述方法矫正误差理论上<0.1 mm,可满足注塑零件机器视觉缺陷检测的需要。首先对采集的图像进行预处理获取图像边缘;接着将轮廓线交点确定为零件顶点;根据顶点位置分割零件的不同表面并将其映射在二维平面;然后根据几何光学计算图像中每一个像素点的偏移量;最后使用基于几何光学的方法对图像中的像素点进行逐点矫正。利用一组六面体零件模拟实际工况,在不同的拍摄定位误差状态下进行实验,使用Matlab对矫正算法进行验证。实验结果表明,所述方法误差在0.1 mm以内,与理论分析相吻合,满足注塑零件在机器视觉缺陷检测中零件图像几何矫正精度的需要。

改良Lapidus截骨术第1跖楔关节单平面截骨联合第1跖骨下移治疗拇外翻的疗效分析

目的分析第1跖楔关节单平面截骨联合第1跖骨下移在改良Lapidus术中治疗拇外翻的疗效。方法选取2018年9月至2021年9月在承德市中心医院采用改良Lapidus截骨术治疗的中重度拇外翻患者共27例(34足)。所有患者均拍摄术前负重X线、术后1周非负重X线和术后随访足负重位X线,测量第1跖骨长度(first metatarsal length,FML),拇外翻角(hallux valgus angle,HVA),第1、2跖骨间夹角(intermetatarsal angle,IMA),胫侧籽骨位置(tibial sesamoid position,TSP),第1跖骨基底距离地面高度和第1跖骨与地面角度,并根据美国足踝外科学会前足评分量表(American Orthopedics Foot and Ankle Society,AOFAS)与疼痛视觉评分(visual analogue scale,VAS)评价该术式的临床疗效。对以上收集的数据进行统计分析。结果所有患者手术均顺利完成并获得12~48个月的随访,平均(23.71±8.05)个月。在FML方面,术后1周、末次随访与术前相比无明显变化,差异均无统计学意义(P>0.05)。在HVA、IMA及TSP方面,术后1周、末次随访与术前相比减小,差异均有统计学意义(P<0.05);但术后1周与末次随访比较无明显变化,差异无统计学意义(P>0.05)。在第1跖骨基底距离地面高度、第1跖骨与地面角度及VAS评分方面,末次随访时与术前相比减小,差异具统计学意义(P<0.05);在AOFAS评分方面,末次随访与术前相比增加,差异具有统计学意义(P<0.05)。所有患者无转移性疼痛等并发症,部分患者表现为影像学资料角度增加。结论第1跖楔关节单平面截骨联合第1跖骨下移不仅能够保证手术治疗效果,还可以有效预防传统Lapidus双平面截骨并发第1跖骨短缩及成角加大引起术后疼痛等并发症,是一种值得推广的手术方式。

基于Python的平面杆系结构有限元分析

基于Python程序,将杆单元位移不连续、理想刚杆两种力学对象关联统一,开展平面杆系结构有限元模型分析,并实现一种基于“变量标记”的自由度集中处理的计算模式.基于虚功原理引入并推证刚体荷载传递定理,表明耦合单元、刚杆及忽略某一自由度的有限元内置算法处理过程中,实质是将单元刚度矩阵进行“刚化”处理.算例分析表明,“变量标记”的计算模式与单元刚度矩阵的“刚化”处理,具有力学模型的普适性和统一性、编程的可行性以及结果的可靠性等特点,能解决平面任意杆系结构的建模问题.研究结果表明,“主从结点”、“刚杆”等建模方法,对于进一步开展有限元二次开发、大变形以及非线性等功能性扩展等有重要的参加价值,证明将Python程序应用于结构有限元分析的可行性.