By using transfer matrix,the lower-order natural frequencies of the Watt type planar six-barlinkage are calculated in this paper.The experiment of the modal analysis is done with the SignalProcessor 7T17S,and the expe...By using transfer matrix,the lower-order natural frequencies of the Watt type planar six-barlinkage are calculated in this paper.The experiment of the modal analysis is done with the SignalProcessor 7T17S,and the experiment results agree with the calculated ones.This method only re-quires calculation of lower-order transfer matrix and determinant values,so that, it can be done ona minicomputer such as IBM/PC.The method adopted in this paper is also suitable for vibrationanalysis of other types of linkages.展开更多
A method for improving dynamic characteristics of planar linkages by activelyvarying the speed function of the input link is presented. Design criteria and constraints for thedynamic design of variable speed planar li...A method for improving dynamic characteristics of planar linkages by activelyvarying the speed function of the input link is presented. Design criteria and constraints for thedynamic design of variable speed planar linkages are developed. Both analytical and optimizationapproaches for determining suitable input speed functions to minimize the driving torque, theshaking moment, or both simultaneously of planar linkages, subject to various design requirementsand constraints, are derived. Finally, some examples are given to illustrate the design procedureand to verify its feasibility.展开更多
The uncertainty of the mechanism motion error is mostly caused by the manufacturing process,so the motion error cannot be effectively predicted at the design phase.The problems of manufacturing complexity and the rela...The uncertainty of the mechanism motion error is mostly caused by the manufacturing process,so the motion error cannot be effectively predicted at the design phase.The problems of manufacturing complexity and the relationship between design and manufacturing are analyzed,and the influence of dimensional tolerance and fit tolerance on the motion accuracy of the system is considered in the design process.Then based on the Monte Carlo simulation,an optimal design model of planar linkage mechanism is set up.A typical offset slider-crank mechanism is used as an illustrative example to carry out the optimal design.Compared with the result of typical robustness design,the similar variation characteristics of the mean value and the standard deviation can be found,so the proposed method is effective.The method is furthermore applied in the optimization of the schemes with different fit tolerances and the prediction of motion errors in the design phase is achieved.A set of quantitative evaluation system for mechanism optimal design is provided.Finally,a basic strategy is presented to balance the motion precision and manufacturing cost.展开更多
This paper relates to the deep research on the Splinc Model Method of KED analysis. With the use of cubic B-splinc function as a link’s transverse deflection interpolation function, the principle of virtual displacem...This paper relates to the deep research on the Splinc Model Method of KED analysis. With the use of cubic B-splinc function as a link’s transverse deflection interpolation function, the principle of virtual displacement is presented as a basic theory for the general formulation of the equations of motion, and thus abandoned the kinematic assumption and the instantaneous structure assumption which arc used in the Spline Model Method. In thc same time, the nonlinear terms sue as coupling terms between thc rigid body motion and elastic deformation arc included. New member’s spline models are established. Mass matrix, Coriolis mass matrix, normal and tangential mass matrix, linear stiffness matrix, nonlinear stiffness matrix and rotation matrix arc derived. The kinematic differential equations of a member and system are deduced in the end. The Newmark direct integration method is used as the solution scheme of the kinematic differential equations to get the periodic response.展开更多
Crank shaft net torque of pumping units is a volatile alternating load, while output torque of a general motor is basically constant. Thus, load characteristics of pumping units and motors are not able to ＂harmoniou...Crank shaft net torque of pumping units is a volatile alternating load, while output torque of a general motor is basically constant. Thus, load characteristics of pumping units and motors are not able to ＂harmoniously＂ match each other; this resulted in a higher output of the motor, lower efficiency, and higher energy consumption of the pumping units. A new six-bar linkage pumping unit is presented according to moment-changing theory. It allows to adjust automatically following the changes of polished rod load, and achieves small crank shaft curve fluctuation. The new pumping unit improves motor efficiency, reduces motor output power, and saves energy. According to the design scheme, kinematics and kinetics models of the new six-bar linkages pumping unit are built up. An optimum design on the main peoCormance parameters and functional analysis were peoCormed.展开更多
This paper focuses on a newly developed transmission for a milli-scale eight-legged crawling robot called OriSCO.The transmission allows intuitive steering by directly changing the direction of the propulsion force.Th...This paper focuses on a newly developed transmission for a milli-scale eight-legged crawling robot called OriSCO.The transmission allows intuitive steering by directly changing the direction of the propulsion force.The transmission is based on the constrained spherical six-bar linkage.The constrained spherical six-bar linkage passes only reciprocating motion out of the motor’s rotating motion,allowing the crawling legs to kick the ground and obtain propulsion.Steering is achieved by adjusting the geometric constraints of the spherical six-bar using a servomotor,allowing the direction of propulsion to be changed.As a result,the OriSCO can move along the ground at a speed of 2.15 body lengths/s,and the robot is 60 mm long.展开更多
There are clearances in mechanism because of manufacture and assembly error,which reduces operation life and working accuracy of mechanism and has a great impact on dynamical responses.At the moment,research in this a...There are clearances in mechanism because of manufacture and assembly error,which reduces operation life and working accuracy of mechanism and has a great impact on dynamical responses.At the moment,research in this area mainly focuses on single degree⁃of⁃freedom mechanism considering one clearance,while research of multi⁃DOF mechanism considering multi⁃clearance is less.With the purpose of studying the dynamical characteristics of complex multi⁃DOF mechanism with multi⁃clearances,a dynamic model was developed.The dynamic responses of 2⁃DOF mechanism with two clearances under different positions,values,and numbers of clearance were analyzed.The displacement,velocity,acceleration,collision force,and the axis trajectory at clearance were then given.In addition,there is a limited amount of literature on chaotic phenomena,which mainly focuses on the chaotic phenomena of end⁃effector of mechanism.But in this paper,the non⁃linear characteristics were analyzed by chaotic phenomenon of clearance joint,then chaotic phenomenon was identified by Poincarémappings and phase diagrams.Bifurcation diagrams were given.The results will offer a reliable technical support for the study of dynamical responses of planar mechanisms and the analysis of chaotic phenomena.展开更多
Based on the geometrical relation between the relative pole and the rotationangles of links in the four-bar linkage, a third order algebraic equation withsingle variable for the closed form solution of planar function...Based on the geometrical relation between the relative pole and the rotationangles of links in the four-bar linkage, a third order algebraic equation withsingle variable for the closed form solution of planar function generators hasbeen derived by using computer symbolic manipulating technique. The newlydeveloped solution method eliminates the requirement of solving system ofnoulinear equations. All solutions of the problem can be obtained directly andeasily without the need of initial values. A numerical example is givendemonstratiap the efficiency and the advantages of this method.展开更多
This paper presents the idea of constructing reconfigurable limbs by integrating metamorphic linkages as subchains.The planar five-bar metamorphic linkages that have three phases resulting from locking of motors are c...This paper presents the idea of constructing reconfigurable limbs by integrating metamorphic linkages as subchains.The planar five-bar metamorphic linkages that have three phases resulting from locking of motors are considered.Under the assumption that the constraint exerted by the reconfigurable limb can switch between no constraint,a constraint force,and a constraint couple,the output motions of the metamorphic linkage in its two planar four-bar linkage phases are identified.By adding an appropriate joint to planar four-bar linkages with translational output,four planar five-bar linkages that can be employed in the construction of reconfigurable limbs are enumerated.Serial chains that can provide a constraint couple and a constraint force are synthesized based on screw theory.Reconfigurable limbs that have three configurations associated with the three distinct phases of the metamorphic linkages are assembled with planar five-bar metamorphic linkages and serial chains with four degrees of freedom.A class of reconfigurable parallel mechanisms are constructed by connecting a moving platform and a base with three identical reconfigurable limbs.The degrees of freedom of the reconfigurable parallel mechanism in different configurations with the metamorphic linkages in different phases are given.Finally,the actuation scheme for this kind of mechanisms is addressed.展开更多
文摘By using transfer matrix,the lower-order natural frequencies of the Watt type planar six-barlinkage are calculated in this paper.The experiment of the modal analysis is done with the SignalProcessor 7T17S,and the experiment results agree with the calculated ones.This method only re-quires calculation of lower-order transfer matrix and determinant values,so that, it can be done ona minicomputer such as IBM/PC.The method adopted in this paper is also suitable for vibrationanalysis of other types of linkages.
基金This project is supported by National Natural Science Foundation of China(No.50405004, No.50335040).
文摘A method for improving dynamic characteristics of planar linkages by activelyvarying the speed function of the input link is presented. Design criteria and constraints for thedynamic design of variable speed planar linkages are developed. Both analytical and optimizationapproaches for determining suitable input speed functions to minimize the driving torque, theshaking moment, or both simultaneously of planar linkages, subject to various design requirementsand constraints, are derived. Finally, some examples are given to illustrate the design procedureand to verify its feasibility.
基金supported by the National Natural Science Foundation of China(No.51275365)the National High-tech R&D Program (863 Program ) (No. 2014AA041504)
文摘The uncertainty of the mechanism motion error is mostly caused by the manufacturing process,so the motion error cannot be effectively predicted at the design phase.The problems of manufacturing complexity and the relationship between design and manufacturing are analyzed,and the influence of dimensional tolerance and fit tolerance on the motion accuracy of the system is considered in the design process.Then based on the Monte Carlo simulation,an optimal design model of planar linkage mechanism is set up.A typical offset slider-crank mechanism is used as an illustrative example to carry out the optimal design.Compared with the result of typical robustness design,the similar variation characteristics of the mean value and the standard deviation can be found,so the proposed method is effective.The method is furthermore applied in the optimization of the schemes with different fit tolerances and the prediction of motion errors in the design phase is achieved.A set of quantitative evaluation system for mechanism optimal design is provided.Finally,a basic strategy is presented to balance the motion precision and manufacturing cost.
文摘This paper relates to the deep research on the Splinc Model Method of KED analysis. With the use of cubic B-splinc function as a link’s transverse deflection interpolation function, the principle of virtual displacement is presented as a basic theory for the general formulation of the equations of motion, and thus abandoned the kinematic assumption and the instantaneous structure assumption which arc used in the Spline Model Method. In thc same time, the nonlinear terms sue as coupling terms between thc rigid body motion and elastic deformation arc included. New member’s spline models are established. Mass matrix, Coriolis mass matrix, normal and tangential mass matrix, linear stiffness matrix, nonlinear stiffness matrix and rotation matrix arc derived. The kinematic differential equations of a member and system are deduced in the end. The Newmark direct integration method is used as the solution scheme of the kinematic differential equations to get the periodic response.
文摘Crank shaft net torque of pumping units is a volatile alternating load, while output torque of a general motor is basically constant. Thus, load characteristics of pumping units and motors are not able to ＂harmoniously＂ match each other; this resulted in a higher output of the motor, lower efficiency, and higher energy consumption of the pumping units. A new six-bar linkage pumping unit is presented according to moment-changing theory. It allows to adjust automatically following the changes of polished rod load, and achieves small crank shaft curve fluctuation. The new pumping unit improves motor efficiency, reduces motor output power, and saves energy. According to the design scheme, kinematics and kinetics models of the new six-bar linkages pumping unit are built up. An optimum design on the main peoCormance parameters and functional analysis were peoCormed.
基金supported by the Research Program funded by the SeoulTech(Seoul National University of Science and Technology).
文摘This paper focuses on a newly developed transmission for a milli-scale eight-legged crawling robot called OriSCO.The transmission allows intuitive steering by directly changing the direction of the propulsion force.The transmission is based on the constrained spherical six-bar linkage.The constrained spherical six-bar linkage passes only reciprocating motion out of the motor’s rotating motion,allowing the crawling legs to kick the ground and obtain propulsion.Steering is achieved by adjusting the geometric constraints of the spherical six-bar using a servomotor,allowing the direction of propulsion to be changed.As a result,the OriSCO can move along the ground at a speed of 2.15 body lengths/s,and the robot is 60 mm long.
基金Sponsored by the Shandong Key Research and Development Public Welfare Program(Grant No.2019GGX104011)the Natural Science Foundation of Shandong Province(Grant No.ZR2017MEE066).
文摘There are clearances in mechanism because of manufacture and assembly error,which reduces operation life and working accuracy of mechanism and has a great impact on dynamical responses.At the moment,research in this area mainly focuses on single degree⁃of⁃freedom mechanism considering one clearance,while research of multi⁃DOF mechanism considering multi⁃clearance is less.With the purpose of studying the dynamical characteristics of complex multi⁃DOF mechanism with multi⁃clearances,a dynamic model was developed.The dynamic responses of 2⁃DOF mechanism with two clearances under different positions,values,and numbers of clearance were analyzed.The displacement,velocity,acceleration,collision force,and the axis trajectory at clearance were then given.In addition,there is a limited amount of literature on chaotic phenomena,which mainly focuses on the chaotic phenomena of end⁃effector of mechanism.But in this paper,the non⁃linear characteristics were analyzed by chaotic phenomenon of clearance joint,then chaotic phenomenon was identified by Poincarémappings and phase diagrams.Bifurcation diagrams were given.The results will offer a reliable technical support for the study of dynamical responses of planar mechanisms and the analysis of chaotic phenomena.
文摘Based on the geometrical relation between the relative pole and the rotationangles of links in the four-bar linkage, a third order algebraic equation withsingle variable for the closed form solution of planar function generators hasbeen derived by using computer symbolic manipulating technique. The newlydeveloped solution method eliminates the requirement of solving system ofnoulinear equations. All solutions of the problem can be obtained directly andeasily without the need of initial values. A numerical example is givendemonstratiap the efficiency and the advantages of this method.
基金supported by the National Natural Science Foundation of China(Grant Nos.51075025,51175029)Beijing Natural Science Foundation of China(Grant No.3132019)the Program for New Century Excellent Talents in University of China(Grant No.NCET-12-0769)
文摘This paper presents the idea of constructing reconfigurable limbs by integrating metamorphic linkages as subchains.The planar five-bar metamorphic linkages that have three phases resulting from locking of motors are considered.Under the assumption that the constraint exerted by the reconfigurable limb can switch between no constraint,a constraint force,and a constraint couple,the output motions of the metamorphic linkage in its two planar four-bar linkage phases are identified.By adding an appropriate joint to planar four-bar linkages with translational output,four planar five-bar linkages that can be employed in the construction of reconfigurable limbs are enumerated.Serial chains that can provide a constraint couple and a constraint force are synthesized based on screw theory.Reconfigurable limbs that have three configurations associated with the three distinct phases of the metamorphic linkages are assembled with planar five-bar metamorphic linkages and serial chains with four degrees of freedom.A class of reconfigurable parallel mechanisms are constructed by connecting a moving platform and a base with three identical reconfigurable limbs.The degrees of freedom of the reconfigurable parallel mechanism in different configurations with the metamorphic linkages in different phases are given.Finally,the actuation scheme for this kind of mechanisms is addressed.
