Reduction effect of final-pass heavy reduction rolling on the texture development,tensile property and stretch formability of ZWK100 alloy plates

Obviously planar anisotropy due to‘TD split’orthotropic texture(TD indicates Transverse direction)always exist in the Rare-earth(RE)or Ca containing Mg alloy sheets,which is likely caused by the lowreduction rolling(and annealing)as revealed in our previous research.In this work,the as-cast billets of a ZWK100 alloy were subjected to final-pass heavy reduction rolling(FHRR)at 500°C with different reductions(30%-70%)after rough rolling,aiming to investigate the reduction effect on the microstructure and texture formation.The results show that FHRR with higher reductions above 50%is in favor of shear banding formation but has little effect on the as-deformed texture components,and the excellent formability with single-pass reduction up to 70%is mainly ascribed to the activation of prismatic slip.FHRR with reduction above 50%and annealing can generate uniform grain structures of~10μm and symmetrical‘oblique-line split’texture in(0001)pole figures,with basal poles tilting by about 50°from ND(Normal direction)towards some oblique-line of TD and RD(Rolling direction)as well as uniform distribution of counter lines as an annular shape,resulting in excellent elongation to failure of~50%and ultra-low planar anisotropyΔr_of~0.1 and high stretch formability(Erichsen value:8.1).The formation‘oblique-line split’texture in(0001)pole figures is mainly correlated with the preferred growth tendency of grains with■//RD,which was suggested to relate to the high mobility of some special boundaries such as 40°-45°■.The influences of starting textures on the mechanical properties,planar anisotropy and related deformation modes,as well as their correlations with the stretch formability were comparatively investigated with the‘TD split’orthotropic texture as a counterpoint.

Phase-pure two-dimensional Fe_(X)GeTe_(2) magnets with near-room-temperature Tc

Two-dimensional(2D)ferromagnets with out-of-plane(OOP)magnetic anisotropy are potential candidates for realizing the next-generation memory devices with ultra-low power consumption and high storage density.However,a scalable approach to synthesize 2D magnets with OOP anisotropy directly on the complimentary metal-oxide semiconductor(CMOS)compatible substrates has not yet been mainly explored,which hinders the practical application of 2D magnets.This work demonstrates a cascaded space confined chemical vapor deposition(CS-CVD)technique to synthesize 2D FexGeTe_(2) ferromagnets.The weight fraction of iron(Fe)in the precursor controls the phase purity of the as-grown FexGeTe2.As a result,high-quality Fe_(3)GeTe_(2) and Fe_(5)GeTe_(2) flakes have been grown selectively using the CS-CVD technique.Curie temperature(Tc)of the as-grown FexGeTe2 can be up to-280 K,nearly room temperature.The thickness and temperature-dependent magnetic studies on the Fe_(5)GeTe_(2) reveal a 2D Ising to 3D XY behavior.Also,Terahertz spectroscopy experiments on Fe_(5)GeTe_(2) display the highest conductivity among other FexGeTe_(2) 2D magnets.The results of this work indicate a scalable pathway for the direct growth and integration of 2D ternary magnets on CMOS-based substrates to develop spintronic memory devices.