Reversible data hiding in encrypted image(RDHEI)is a widely used technique for privacy protection,which has been developed in many applications that require high confidentiality,authentication and integrity.Proposed R...Reversible data hiding in encrypted image(RDHEI)is a widely used technique for privacy protection,which has been developed in many applications that require high confidentiality,authentication and integrity.Proposed RDHEI methods do not allow high embedding rate while ensuring losslessly recover the original image.Moreover,the ciphertext form of encrypted image in RDHEI framework is easy to cause the attention of attackers.This paper proposes a reversible data hiding algorithm based on image camouflage encryption and bit plane compression.A camouflage encryption algorithm is used to transform a secret image into another meaningful target image,which can cover both secret image and encryption behavior based on“plaintext to plaintext”transformation.An edge optimization method based on prediction algorithm is designed to improve the image camouflage encryption quality.The reversible data hiding based bit-plane level compression,which can improve the redundancy of the bit plane by Gray coding,is used to embed watermark in the camouflage image.The experimental results also show the superior performance of the method in terms of embedding capacity and image quality.展开更多
Recrystallization behavior of a low carbon X70 pipeline steel was studied in the plane strain compression condition. It was found that the dynamic recovery but no dynamic recrystal- lization occurred in the current ex...Recrystallization behavior of a low carbon X70 pipeline steel was studied in the plane strain compression condition. It was found that the dynamic recovery but no dynamic recrystal- lization occurred in the current experimental condition. A method for examining the prior austenite grain boundary corrosion was supposed.展开更多
This paper presents an indirect boundary integration equation method for diffraction of plane P waves by a two-dimensional canyon of arbitrary shape in poroelastic half-space. The Green＇s functions of compressional a...This paper presents an indirect boundary integration equation method for diffraction of plane P waves by a two-dimensional canyon of arbitrary shape in poroelastic half-space. The Green＇s functions of compressional and shear wave sources in poroelastic half-space are derived based on Biot＇s theory. The scattered waves are constructed using the fictitious wave sources close to the boundary of the canyon, and magnitude of the fictitious wave sources are determined by the boundary conditions. The precision of the method is verified by the satisfaction extent of boundary conditions, the comparison between the degenerated solutions of single-phased half-space and the well-known solutions, and the numerical stability of the method.展开更多
A layer-stripping method is presented for simultaneous inversion of compressional velocity and shear velocity in layered medium from single precritical-incident-angle data of P-P and P-SV plane wave seismogram. A fini...A layer-stripping method is presented for simultaneous inversion of compressional velocity and shear velocity in layered medium from single precritical-incident-angle data of P-P and P-SV plane wave seismogram. A finite bandwidth algorithm is provided and results obviously better than previous research work are obtained by the numerical experiments for band-limited seismogram and synthetic data including noise.展开更多
Thermomechanical Controlled Processing (TMCP) including accelerated cooling after the final hot rolling pass is a well-established technology,widely applied in HSLA steel plate production.However,there are still certa...Thermomechanical Controlled Processing (TMCP) including accelerated cooling after the final hot rolling pass is a well-established technology,widely applied in HSLA steel plate production.However,there are still certain limitations,especially for thicker plate.The rolling schedule includes a long holding period (HP) after the roughing stage to allow the temperature to fall sufficiently for optimised TMCP during finishing.Intermediate Forced Cooling (IFC) applied during the HP can increase productivity by decreasing the required hold time,can restrict austenite grain growth,and can also improve the subsequent strain penetration in thick plate with further metallurgical benefits.Multi-pass plane strain compression (PSC) tests have been performed on the thermomechanical compression (TMC) machine at Sheffield University including different severities of IFC.Clearly it is impossible to simulate all aspects of the temperature and strain gradients present in thick plates in laboratory specimens,and most of the tests were conducted at temperatures and strains calculated by Finite Element modelling as relevant to specific positions through the plate thickness.However,some aspects of the gradients were addressed with tests using cold platens.The results have indeed shown that IFC can shorten the HP and reduce austenite grain growth and its variation across thick plate.展开更多
基金supported in part by the National Key R&D Program of China(2019YFB1406504)the National Natural Science Foundation of China(U1836108,U1936216,62002197).
文摘Reversible data hiding in encrypted image(RDHEI)is a widely used technique for privacy protection,which has been developed in many applications that require high confidentiality,authentication and integrity.Proposed RDHEI methods do not allow high embedding rate while ensuring losslessly recover the original image.Moreover,the ciphertext form of encrypted image in RDHEI framework is easy to cause the attention of attackers.This paper proposes a reversible data hiding algorithm based on image camouflage encryption and bit plane compression.A camouflage encryption algorithm is used to transform a secret image into another meaningful target image,which can cover both secret image and encryption behavior based on“plaintext to plaintext”transformation.An edge optimization method based on prediction algorithm is designed to improve the image camouflage encryption quality.The reversible data hiding based bit-plane level compression,which can improve the redundancy of the bit plane by Gray coding,is used to embed watermark in the camouflage image.The experimental results also show the superior performance of the method in terms of embedding capacity and image quality.
文摘Recrystallization behavior of a low carbon X70 pipeline steel was studied in the plane strain compression condition. It was found that the dynamic recovery but no dynamic recrystal- lization occurred in the current experimental condition. A method for examining the prior austenite grain boundary corrosion was supposed.
基金support from the Program for New Century Excellent Talents in University (NCET-05-0248)the Key Program for Applied Basic Research of Tianjin Municipality (07JCZDJC10100)
文摘This paper presents an indirect boundary integration equation method for diffraction of plane P waves by a two-dimensional canyon of arbitrary shape in poroelastic half-space. The Green＇s functions of compressional and shear wave sources in poroelastic half-space are derived based on Biot＇s theory. The scattered waves are constructed using the fictitious wave sources close to the boundary of the canyon, and magnitude of the fictitious wave sources are determined by the boundary conditions. The precision of the method is verified by the satisfaction extent of boundary conditions, the comparison between the degenerated solutions of single-phased half-space and the well-known solutions, and the numerical stability of the method.
基金Project supported by the National Natural Science Foundation of China and General Corp. for Oil and Gas and Daqing Oilfield.
文摘A layer-stripping method is presented for simultaneous inversion of compressional velocity and shear velocity in layered medium from single precritical-incident-angle data of P-P and P-SV plane wave seismogram. A finite bandwidth algorithm is provided and results obviously better than previous research work are obtained by the numerical experiments for band-limited seismogram and synthetic data including noise.
基金Tata Steel Europe Research Development & Technology for their financial and technical support
文摘Thermomechanical Controlled Processing (TMCP) including accelerated cooling after the final hot rolling pass is a well-established technology,widely applied in HSLA steel plate production.However,there are still certain limitations,especially for thicker plate.The rolling schedule includes a long holding period (HP) after the roughing stage to allow the temperature to fall sufficiently for optimised TMCP during finishing.Intermediate Forced Cooling (IFC) applied during the HP can increase productivity by decreasing the required hold time,can restrict austenite grain growth,and can also improve the subsequent strain penetration in thick plate with further metallurgical benefits.Multi-pass plane strain compression (PSC) tests have been performed on the thermomechanical compression (TMC) machine at Sheffield University including different severities of IFC.Clearly it is impossible to simulate all aspects of the temperature and strain gradients present in thick plates in laboratory specimens,and most of the tests were conducted at temperatures and strains calculated by Finite Element modelling as relevant to specific positions through the plate thickness.However,some aspects of the gradients were addressed with tests using cold platens.The results have indeed shown that IFC can shorten the HP and reduce austenite grain growth and its variation across thick plate.
