The development of modern agriculture requires the reduction of water and chemical N fertilizer inputs.Increasing the planting density can maintain higher yields,but also consumes more of these restrictive resources.H...The development of modern agriculture requires the reduction of water and chemical N fertilizer inputs.Increasing the planting density can maintain higher yields,but also consumes more of these restrictive resources.However,whether an increased maize density can compensate for the negative effects of reduced water and N supply on grain yield and N uptake in the arid irrigated areas remains unknown.This study is part of a long-term positioning trial that started in 2016.A split-split plot field experiment of maize was implemented in the arid irrigated area of northwestern China in 2020 to 2021.The treatments included two irrigation levels:local conventional irrigation reduced by 20%(W1,3,240 m^(3)ha^(-1))and local conventional irrigation(W2,4,050 m^(3)ha^(-1));two N application rates:local conventional N reduced by 25%(N1,270 kg ha^(-1))and local conventional N(360 kg ha^(-1));and three planting densities:local conventional density(D1,75,000 plants ha^(-1)),density increased by 30%(D2,97,500 plants ha-1),and density increased by 60%(D3,120,000 plants ha^(-1)).Our results showed that the grain yield and aboveground N accumulation of maize were lower under the reduced water and N inputs,but increasing the maize density by 30% can compensate for the reductions of grain yield and aboveground N accumulation caused by the reduced water and N supply.When water was reduced while the N application rate remained unchanged,increasing the planting density by 30% enhanced grain yield by 13.9% and aboveground N accumulation by 15.3%.Under reduced water and N inputs,increasing the maize density by 30% enhanced N uptake efficiency and N partial factor productivity,and it also compensated for the N harvest index and N metabolic related enzyme activities.Compared with W2N2D1,the N uptake efficiency and N partial factor productivity increased by 28.6 and 17.6%under W1N1D2.W1N2D2 had 8.4% higher N uptake efficiency and 13.9% higher N partial factor productivity than W2N2D1.W1N2D2 improved urease activity and nitrate reductase activity by 5.4% at the R2(blister)stage and 19.6% at the V6(6th leaf)stage,and increased net income and the benefit:cost ratio by 22.1 and 16.7%,respectively.W1N1D2 and W1N2D2 reduced the nitrate nitrogen and ammoniacal nitrogen contents at the R6 stage in the 40-100 cm soil layer,compared with W2N2D1.In summary,increasing the planting density by 30% can compensate for the loss of grain yield and aboveground N accumulation under reduced water and N inputs.Meanwhile,increasing the maize density by 30% improved grain yield and aboveground N accumulation when water was reduced by 20% while the N application rate remained constant in arid irrigation areas.展开更多
Mung bean (Vigna radiata L. Wilczek.) is a warm-season, C<sub>3</sub> pulse crop of the legume family that has been widely cultivated in Asian countries. As the demand for mung bean continues to increase i...Mung bean (Vigna radiata L. Wilczek.) is a warm-season, C<sub>3</sub> pulse crop of the legume family that has been widely cultivated in Asian countries. As the demand for mung bean continues to increase in the United States, the ecophysiology, growth, and yield of mung bean varieties in the southeastern US need to be assessed. A field experiment was conducted at the Agricultural Research and Education Center of Tennessee State University to investigate the effects of four varieties (OK2000, Berken, TSU-1, AAMU-1) and three planting densities (5, 10, and 15 cm spacing) on the ecophysiology and yield of mung bean. Results showed that the relative chlorophyll content, plant height, pod dry biomass, pod number, crop yield, and harvest index significantly varied among the varieties. Density only influenced transpiration, relative chlorophyll content, and plant dry biomass. OK2000 had 101.0% more pods per plant and a 42.4% higher harvest index and produced a 45.3% higher yield than other varieties, but no significant difference in yield was found among the other three varieties. This study demonstrated that the mung bean variety OK2000 with a high yield would be ideal for commercial production in the southeastern US.展开更多
Excessive use of nitrogen fertilizer and high planting density reduce grain weight in wheat.However,the effects of high nitrogen and planting density on the filling of grain located in different positions of the wheat...Excessive use of nitrogen fertilizer and high planting density reduce grain weight in wheat.However,the effects of high nitrogen and planting density on the filling of grain located in different positions of the wheat spikelet are unknown.A two-year field experiment was conducted to investigate this question and the underlying mechanisms with respect to hormone and carbohydrate activity.Both high nitrogen application and planting density significantly increased spike density,while reducing kernel number per spike and 1000-kernel weight.However,the effects of high nitrogen and high plant density on kernel number per spike and 1000-kernel weight were different.The inhibitory effect of high nitrogen application and high planting density on kernel number per spike was achieved mainly by a reduction in kernel number per spikelet in the top and bottom spikelets.However,the decrease in 1000-kernel weight was contributed mainly by the reduced weight of grain in the middle spikelets.The grain-filling rate of inferior grain in the middle spikelets was significantly decreased under high nitrogen input and high planting density conditions,particularly during the early and middle grain-filling periods,leading to the suppression of grain filling and consequent decrease in grain weight.This effect resulted mainly from inhibited sucrose transport to and starch accumulation in inferior grain in the middle spikelets via reduction of the abscisic acid/ethylene ratio.This mechanism may explain how high nitrogen application and high planting density inhibit the grain filling of inferior wheat grain.展开更多
To date,little attention has been paid to the effects of leaf source reduction on photosynthetic matter production,root function and post-silking N uptake characteristics at different planting densities.In a 2-year fi...To date,little attention has been paid to the effects of leaf source reduction on photosynthetic matter production,root function and post-silking N uptake characteristics at different planting densities.In a 2-year field experiment,Xianyu 335,a widely released hybrid in China,was planted at 60 000 plants ha^(–1 )(conventional planting density,CD) and 90 000 plants ha^(–1) (high planting density,HD),respectively.Until all the filaments protruded from the ear,at which point the plants were subjected to the removal of 1/2 (T1),1/3 (T2) and 1/4 (T3) each leaf length per plant,no leaf removal served as the control(CK).We evaluated the leaf source reduction on canopy photosynthetic matter production and N accumulation of different planting densities.Under CD,decreasing leaf source markedly decreased photosynthetic rate (P_(n)),effective quantum yield of photosystem II (ΦPSII) and the maximal efficiency of photosystem II photochemistry (F_(v)/F_(m)) at grain filling stage,reduced post-silking dry matter accumulation,harvest index (HI),and the yield.Compared with the CK,the 2-year average yields of T1,T2 and T3 treatments decreased by 35.4,23.8 and 8.3%,respectively.Meanwhile,decreasing leaf source reduced the root bleeding sap intensity,the content of soluble sugar in the bleeding sap,post-silking N uptake,and N accumulation in grain.The grain N accumulation in T1,T2 and T3 decreased by 26.7,16.5 and 12.8% compared with CK,respectively.Under HD,compared to other treatments,excising T3 markedly improved the leaf P_(n),ΦPSII and F_(v)/F_(m) at late-grain filling stage,increased the post-silking dry matter accumulation,HI and the grain yield.The yield of T3 was 9.2,35.7 and 20.1% higher than that of CK,T1 and T2 on average,respectively.The T3 treatment also increased the root bleeding sap intensity,the content of soluble sugar in the bleeding sap and post-silking N uptake and N accumulation in grain.Compared with CK,T1 and T2 treatments,the grain N accumulation in T3 increased by 13.1,40.9 and 25.2% on average,respectively.In addition,under the same source reduction treatment,the maize yield of HD was significantly higher than that of CD.Therefore,planting density should be increased in maize production for higher grain yield.Under HD,moderate decreasing leaf source improved photosynthetic performance and increased the post-silking dry matter accumulation and HI,and thus the grain yield.In addition,the improvement of photosynthetic performance improved the root function and promoted postsilking N uptake,which led to the increase of N accumulation in grain.展开更多
Field experiments were conducted from 2012 to 2015 in an arid region of Northwest China to investigate the effects of planting density on plant growth, yield, and water use efficiency(WUE) of maize for seed producti...Field experiments were conducted from 2012 to 2015 in an arid region of Northwest China to investigate the effects of planting density on plant growth, yield, and water use efficiency(WUE) of maize for seed production. Five planting densities of 6.75, 8.25, 9.75, 11.25 and 12.75 plants/m^2 were conducted in 2012, and a planting density of 14.25 plants/m^2 was added from 2013 to 2015. Through comparison with the Aqua Crop yield model, a modified model was developed to estimate the biomass accumulation and yield under different planting densities using adjustment coefficient for normalized biomass water productivity and harvest index. It was found that the modified yield model had a better performance and could generate results with higher determination coefficient and lower error. The results indicated that higher planting density increased the leaf area index and biomass accumulation, but decreased the biomass accumulation per plant. The total yield increased rapidly as planting density increased to 11.25 plants/m^2, but only a slight increase was observed when the density was greater than 11.25 plants/m^2. The WUE also reached the maximum when planting density was 11.25 plants/m^2, which was the recommended planting density of maize for seed production in Northwest China.展开更多
Cotton yield per unit ground area has stagnated for a dozen years in Hubei Province, China, although a series of new high- yielding varieties have been commercialized. A multi-location investigation was carried out in...Cotton yield per unit ground area has stagnated for a dozen years in Hubei Province, China, although a series of new high- yielding varieties have been commercialized. A multi-location investigation was carried out in 2008 and 2009 in 13 counties to determine if increased planting population density (PPD) would break the stagnant yield. The results showed that significant differences among the fields existed in theoretical yield, PPD, and bolls per square meter (BPM). The lowest yield of 1 641.1 kg ha-I was resulted from the lowest PPD of 1.7 plants m-2 and the lowest BPM of 71.8 bolls m-2, while the highest yield of 2 779.7 kg ha-~ was resulted from the highest PPD of 2.5 plants m-2, and the highest BPM of 129.4 bolls m-z. Plant mapping revealed that boll retention rate (BRR) was maintained over 30 or 40% for the first 17-18 fruiting branches (FBs) and decreased dramatically thereafter, rotten boll rate (RBR) decreased, but open boll rate (OBR) rose first and dropped later with rising FB from the bottom to the top. But BRR, RBR, and OBR were all dropped with the fruiting positions (FPs) extending outwards. The optimum range of plant density would be 2-3 plants m-2 and the proper individual plant structure would be 16-19 FBs with 5-7 FPs for cotton production in Hubei Province.展开更多
To address the relationships between the amount of nitrogen fertilizer application and the yield of double cropping rice systems,we investigated the effects of a cultivation pattern of strong seedlings with increased ...To address the relationships between the amount of nitrogen fertilizer application and the yield of double cropping rice systems,we investigated the effects of a cultivation pattern of strong seedlings with increased planting density and reduced nitrogen application(SDN)on the morphological and physiological characteristics of double cropping rice.Our results indicated that the effects of SDN on the morphological characteristics of the single plant roots of double cropping rice were not significant,but the morphological characteristics of the population roots were largely different.Specifically,SDN significantly increased the morphological indexes of the root population such as root fresh weight,root volume,root number,root length and root dry weight.The effects of SDN on the total root absorption areas and root active absorption areas of the single plants were non-significant,but it dramatically enhanced the total root absorption areas and root active absorption areas of the plant population during the tillering,heading and mature stages.In addition,SDN significantly increased the root bleeding intensity and elevated the soluble sugar and free amino acid contents of root bleeding sap.Compared to the traditional cultivation pattern(CK),SDN significantly increased root bleeding intensity at the heading stage by 4.37 and 8.90% for early and late rice,respectively.Meanwhile,SDN profoundly enhanced the soluble sugar contents of root bleeding sap by 12.85 and 10.41% for early and late rice,respectively.In addition,SDN also significantly enhanced free amino acid content of root bleeding sap by 43.25% for early rice and by 37.50% for late rice systems compared to CK.Furthermore,SDN increased the actual yield of double cropping rice mainly due to the higher effective panicle number and the larger seedsetting rate.The actual yields of early rice under SDN were higher than CK by 9.37 and 5.98% in 2016 and 2017,and the actual yields of late rice under SDN were higher than CK by 0.20 and 1.41% in 2016 and 2017,respectively.Correlation analysis indicated that the significant positive correlations were observed between the majority of the root indexes and the actual yield across the four different growth stages.展开更多
Lodging in maize leads to yield losses worldwide.In this study,we determined the effects of traditional and optimized nitrogen management strategies on culm morphological characteristics,culm mechanical strength,ligni...Lodging in maize leads to yield losses worldwide.In this study,we determined the effects of traditional and optimized nitrogen management strategies on culm morphological characteristics,culm mechanical strength,lignin content,root growth,lodging percentage and production in maize at a high plant density.We compared a traditional nitrogen(N)application rate of 300 kg ha–1(R)and an optimized N application rate of 225 kg ha^(–1)(O)under four N application modes:50%of N applied at sowing and 50%at the 10th-leaf stage(N1);100%of N applied at sowing(N2);40%of N applied at sowing,40%at the 10th-leaf stage and 20%at tasseling stage(N3);and 30%of N applied at sowing,30%at the 10th-leaf stage,20%at the tasseling stage,and 20%at the silking stage(N4).The optimized N rate(225 kg ha^(–1))significantly reduced internode lengths,plant height,ear height,center of gravity height and lodging percentage.The optimized N rate significantly increased internode diameters,filling degrees,culm mechanical strength,root growth and lignin content.The application of N in four split doses(N4)significantly improved culm morphological characteristics,culm mechanical strength,lignin content,and root growth,while it reduced internode lengths,plant height,ear height,center of gravity height and lodging percentage.Internode diameters,filling degrees,culm mechanical strength,lignin content,number and diameter of brace roots,root volume,root dry weight,bleeding safe and grain yield were significantly negatively correlated with plant height,ear height,center of gravity height,internode lengths and lodging percentage.In conclusion,treatment ON4 significantly reduced the lodging percentage by improving the culm morphological characteristics,culm mechanical strength,lignin content,and root growth,so it improved the production of the maize crop at a high plant density.展开更多
Poplar is raw material for various panel, paper and fiber products. The 12 sample trees of clone Nanlin-895 from four spacings were destructively harvested after thirteen growing seasons to assess the influence of spa...Poplar is raw material for various panel, paper and fiber products. The 12 sample trees of clone Nanlin-895 from four spacings were destructively harvested after thirteen growing seasons to assess the influence of spacing on radial growth and wood properties. Spacing significantly affected tree-ring width and wood basic density (p < 0.05) but not fiber traits. The highest diameter and wood basic density at breast height (1.3 m) was in 6 m × 6 m and 3 m × 8 m spacings, respectively. However, no significant differences in tree-ring width, wood basic density and fiber traits were observed among the four sampling directions in discs taken at 1.3 m for each spacing. Growth rings from the pith and tree heights had significant effects on wood basic density and fiber anatomical characteristics, highlighting obvious temporal-spatial variations. Pearson correlation analysis showed a significantly negative relationship of tree-ring width to wood basic density, fiber length and fiber width, but a significantly positive relationship to hemicellulose. There was no relationship with cellulose and lignin contents. Based on a comprehensive assessment by the TOPSIS method, the 6 m × 6 m spacing is recommended for producing wood fiber at similar sites in the future.展开更多
Increasing the planting density is one way to enhance grain production in maize.However,high planting density brings about growth and developmental defects such as barrenness,which is the major factor limiting grain y...Increasing the planting density is one way to enhance grain production in maize.However,high planting density brings about growth and developmental defects such as barrenness,which is the major factor limiting grain yield.In this study,the barrenness was characterized in an association panel comprising 280 inbred lines under normal(67500 plants ha–1,ND)and high(120000 plants ha–1,HD)planting densities in 2017 and 2018.The population was genotyped using 776254 single nucleotide polymorphism(SNP)markers with criteria of minor allele frequency>5%and<20%missing data.A genome-wide association study(GWAS)was conducted for barrenness under ND and HD,as well as the barrenness ratio(HD/ND),by applying a Mixed Linear Model that controls both population structure and relative kinship(Q+K).In total,20 SNPs located in nine genes were significantly(P<6.44×10–8)associated with barrenness under the different planting densities.Among them,seven SNPs for barrenness at ND and HD were located in two genes,four of which were common under both ND and HD.In addition,13 SNPs for the barrenness ratio were located in seven genes.A complementary pathway analysis indicated that the metabolic pathways of amino acids,such as glutamate and arginine,and the mitogen-activated protein kinase(MAPK)signaling pathway might play important roles in tolerance to high planting density.These results provide insights into the genetic basis of high planting density tolerance and will facilitate high yield maize breeding.展开更多
Background Mepiquat chloride(MC)application and plant population density(PPD)increasing are required for modern cotton production.However,their interactive effects on leaf physiology and carbohydrate metabolism remain...Background Mepiquat chloride(MC)application and plant population density(PPD)increasing are required for modern cotton production.However,their interactive effects on leaf physiology and carbohydrate metabolism remain obscure.This study aimed to examine whether and how MC and PPD affect the leaf morpho-physiological characteristics,and thus final cotton yield.PPD of three levels(D1:2.25 plants·m^(-2),D2:4.5 plants·m^(-2),and D3:6.75 plants·m^(-2))and MC dosage of two levels(MC0:0 g·ha^(-2),MC1:82.5 g·ha^(-2))were combined to create six treatments.The dynamics of nonstructual carbohydrate concentration,carbon metabolism-related enzyme activity,and photosynthetic attributes in cotton leaves were examined during reproductive growth in 2019 and 2020.Results Among six treatments,the high PPD of 6.75 plants·m^(-2)combined with MC application(MC1D3)exhibited the greatest seed cotton yield and biological yield.The sucrose,hexose,starch,and total nonstructural carbohydrate(TNC)concentrations peaked at the first flowering(FF)stage and then declined to a minimum at the first boll opening(FBO)stage.Compared with other treatments,MC1D3 improved starch and TNC concentration by 5.4%~88.4%,7.8%~52.0% in 2019,and by 14.6%~55.9%,13.5%~39.7% in 2020 at the FF stage,respectively.Additionally,MC1D3 produced higher transformation rates of starch and TNC from the FF to FBO stages,indicating greater carbon production and utilization efficiency.MC1D3 displayed the maximal specific leaf weight(SLW)at the FBO stage,and the highest chlorophyll a(Chl a),Chl b,and Chl a+b concentration at the mid-late growth phase in both years.The Rubisco activity with MC1D3 was 2.6%~53.2% higher at the flowering and boll setting stages in both years,and 2.4%~52.7% higher at the FBO stage in 2020 than those in other treatments.These results provided a explanation of higher leaf senescence-resistant ability in MC1D3.Conclusion Increasing PPD coupled with MC application improves cotton yield by enhancing leaf carbohydrate production and utilization efficiency and delaying leaf senescence.展开更多
Increasing the planting density is an effective way to increase the yield of maize(Zea mays L.),although it can also aggravate ovary apical abortion-induced bald tips of the ears,which might,in turn,reduce the yield.W...Increasing the planting density is an effective way to increase the yield of maize(Zea mays L.),although it can also aggravate ovary apical abortion-induced bald tips of the ears,which might,in turn,reduce the yield.While the mechanism underlying the regulation of drought-related abortion in maize is well established,high planting density-related abortion in maize remains poorly understood.Therefore,the present study was designed to investigate the mechanism underlying the ovary apical abortion response to high density.This was achieved by evaluating the effects of four different plant densities(60000 plants ha^(–1)(60 k),90 k,120 k,and 150 k)on plant traits related to plant architecture,the plant ear,flowering time,and silk development in two inbred lines(Zheng58 and PH4CV)and two hybrid lines(Zhengdan958 and Xianyu335).The phenotypes of both inbred and hybrid plants were observed under different planting density treatments,and the high planting density was found to increase the phenotypic performance values of the evaluated traits.The anthesis–silking interval(ASI)was extended,and the amount of the silk extruded from husks was reduced upon increasing the planting density.Delayed silk emergence resulted in asynchronous flowering and ear bald tips.Observations of the silk cells revealed that the silk cells became smaller as planting density increased.The changes in transcript abundances in the silks involved the genes associated with expansive growth rather than carbon metabolism.These findings further our understanding of silk growth regulation under high planting density and provide a theoretical basis for further research on improving high planting density breeding in maize.展开更多
Forage soybean is an important source of high protein forage.Variety screening and breeding not only can solve the adjustment of agricultural planting structure,but also can provide a large amount of high-protein fora...Forage soybean is an important source of high protein forage.Variety screening and breeding not only can solve the adjustment of agricultural planting structure,but also can provide a large amount of high-protein forage material,and effectively solve the problem of a serious shortage of high-protein forage in herbivorous animal husbandry in China.In this study,the feeding-type soybean strain HN389 was selected as experimental material,with three planting densities of 270000,405000 and 540000 plants•hm^(-2) and three cutting periods of the initial pod stage(R1),the initial grain stage(R2)and the early mature stage(R3)were set to determine the yield and feeding quality,in order to obtain the best planting density and harvest time of the variety.The results showed that in forage soybean strain HN389 at the R1 and R2 stages,plant height increased with increasing planting densities,while fresh and dry weight per plant decreased with increasing planting densities,and there was no significant difference at the R3 stage.The yield of hay at the R1,R2 and R3 stages increased firstly and then decreased with the increase of planting densities,and the yield per hectare was R3>R2>R1.The order of contents of crude protein(CP),neutral detergent fibers(NDF)and acid detergent fiber(ADF)in feeding quality of HN389 were R2>R1>R3,and ether extract(EE)content order was R3>R1>R2,and there was no significant difference among different groups.Two principal components were extracted from five forage indexes including CP,NDF,ADF,EE and fresh grass yield by principal component analysis.The cumulative contribution rate of principal components 1 and 2 was 90.053%,and their characteristic values were 3.617 and 0.885,respectively.After a comprehensive evaluation,harvested at the R3 stage and the density was 405000 plants•hm^(-2),HN389 had the highest comprehensive score of 0.344,yield of 38035.53 kg•hm^(-2),CP,NDF,ADF and EE contents of 17.61%,17.61%,21.54%and 3.81%,respectively.展开更多
Ningqiao 1 was selected as the material to study the effects of planting density on physiological indices,agronomic traits and yield of buckwheat.The results showed that high density resulted in decreases of chlorophy...Ningqiao 1 was selected as the material to study the effects of planting density on physiological indices,agronomic traits and yield of buckwheat.The results showed that high density resulted in decreases of chlorophyll content,soluble protein content and activity of SOD,POD and CAT,and acceleration of MDA accumulation under drought conditions.Low density could effectively improve the grain number per plant,grain weight per plant,1000-grain weight and yield in drought conditions.展开更多
To get the cultivation pattern featured by improved varieties and fine methods for strong-gluten and high-yielding wheat variety Taishan 27,this paper used Taishan 27 as material to study the effect of fertilizing amo...To get the cultivation pattern featured by improved varieties and fine methods for strong-gluten and high-yielding wheat variety Taishan 27,this paper used Taishan 27 as material to study the effect of fertilizing amount and planting density on yield and quality of material.The results showed that Taishan 27 had high yield under fertilizing amount of 225 kg/ha pure nitrogen and planting density of 240 × 104-300× 10~4/ha; the yield was lowest under fertilizing amount of 300 kg/ha pure nitrogen and planting density of 360 × 10~4/ha. The suitable planting density for Taishan 27 was 240 × 104-300 × 10~4/ha,and the fertilizing amount of nitrogen should be based on different soil fertility conditions to avoid water and fertilizer stress and improve yield.展开更多
[Objectives]To study the optimum sowing density of quinoa in Chengde region.[Methods]Yanli No.2 cultivated by Institute of Millet Crops,Hebei Academy of Agriculture and Forestry Sciences was taken as test material.In ...[Objectives]To study the optimum sowing density of quinoa in Chengde region.[Methods]Yanli No.2 cultivated by Institute of Millet Crops,Hebei Academy of Agriculture and Forestry Sciences was taken as test material.In Chengde region,single-factor density test design was used to study the effects of sowing on agronomic characters and yield of quinoa.[Results]Quinoa had the highest comprehensive yield when row spacing was 30 cm and plant spacing was 25 cm.[Conclusions]The research could provide theoretical basis for quinoa planting in Chengde region.展开更多
[ Objective] This study was conducted to investigate the relationship between each of planting density and row spacing and plant productivity of forage sweet sorghum planted in autumn idle land. [ Methods] Using split...[ Objective] This study was conducted to investigate the relationship between each of planting density and row spacing and plant productivity of forage sweet sorghum planted in autumn idle land. [ Methods] Using split-plot experiment design experiment method and LSD method of IBM. SPSS. Statistics. v22 statistics software, the effects of planting density and row spacing on plant productivity of forage sweet sorghum planted in autumn idle land were compared. [ Result] The results showed that the planting density and row spacing had important influences on plant productivity of forage sweet sorghum planted in autumn idle land. Moreover, the optimal combination of plant productivity for A1B4 , i. e. ,under the combination of the planting density of 7.5 × 10^4 plants/hm^2 and the row spacing of 40 cm, the fresh weight and dry weight per plant were 654.37 and 147.11 g/plant, respectively. [ Conclusion ] The results provided a theoretical basis for the production of forage sweet sorghum in autumn idle land.展开更多
Achieving high maize yields and efficient phosphorus(P)use with limited environmental impacts is one of the greatest challenges in sustainable maize production.Increasing plant density is considered an effective appro...Achieving high maize yields and efficient phosphorus(P)use with limited environmental impacts is one of the greatest challenges in sustainable maize production.Increasing plant density is considered an effective approach for achieving high maize yields.However,the low mobility of P in soils and the scarcity of natural P resources have hindered the development of methods that can simultaneously optimize P use and mitigate the P-related environmental footprint at high plant densities.In this study,meta-analysis and substance flow analysis were conducted to evaluate the effects of different types of mineral P fertilizer on maize yield at varying plant densities and assess the flow of P from rock phosphate mining to P fertilizer use for maize production in China.A significantly higher yield was obtained at higher plant densities than at lower plant densities.The application of single superphosphate,triple super-phosphate,and calcium magnesium phosphate at high plant densities resulted in higher yields and a smaller environmental footprint than the application of diammonium phosphate and monoammonium phosphate.Our scenario analyses suggest that combining the optimal P type and application rate with a high plant density could increase maize yield by 22%.Further,the P resource use efficiency throughout the P supply chain increased by 39%,whereas the P-related environmental footprint decreased by 33%.Thus,simultaneously optimizing the P type and application rate at high plant densities achieved multiple objectives during maize production,indicating that combining P management with cropping techniques is a practical approach to sustainable maize production.These findings offer strategic,synergistic options for achieving sustainable agricultural development.展开更多
Increasing the planting density can exacerbate crop competition for water,nutrients and space which results in a decline in the crop yields.However,the effect of increasing planting density on crop growth and soil bio...Increasing the planting density can exacerbate crop competition for water,nutrients and space which results in a decline in the crop yields.However,the effect of increasing planting density on crop growth and soil biological characteristics in barren sandy land in the semi-arid regions are still unclear.In this study,we investigated the effects of six planting densities(5.4×10^(4),6.45×10^(4),7.95×10^(4),9.5×10^(4),9.75×10^(4) and 10.5×10^(4) plants/hm^(2))on maize growth,photosynthesis characteristics,yield and soil biological characteristics in barren sandy soil in the semi-arid region of Ningxia,China.The results indicated that the stem diameter and spike length decreased linearly with increasing planting density.The plant height,spike weight,grain weight and 100-grain weight decreased with increasing plating density.Moreover,the root length increased with increasing planting density.The diameter,volume and activity increased and then decreased with increasing planting density.There was no significant difference(p>0.05)in the effect of planting density on transpiration rate intercellular CO_(2) concentration.As well,the soil microbial biomass carbon and microbial biomass nitrogen decreased with increasing planting density.The soil catalase activities increased and then decreased with increasing planting density.The alkaline phosphatase activity,the amounts of soil bacteria and actinomycetes increased with increasing planting density.Generally,a moderately increasing planting density can improve maize yield when water and nutrients are sufficient.The optimal planting density was 8.29×10^(4) plants/hm^(2) and the highest yield was 15.84 t/hm^(2) in barren sandy soil in semi-arid region of Ningxia,China.This study provides a theoretical basis for high yield and high efficiency of maize.展开更多
Increasing plant density is an effective way to enhance maize yield, but often increases lodging rate and severity, significantly elevating the risk and cost of maize production. Therefore, lodging is a major factor r...Increasing plant density is an effective way to enhance maize yield, but often increases lodging rate and severity, significantly elevating the risk and cost of maize production. Therefore, lodging is a major factor restricting future increases in maize yield through high-density planting. This paper reviewed previous research on the relationships between maize lodging rate and plant morphology, mechanical strength of stalks, anatomical and biochemical characteristics of stalks, root characteristics, damage from pests and diseases, environmental factors, and genomic characteristics. The effects of planting density on these factors and explored possible ways to improve lodging resistance were also analyzed in this paper. The results provide a basis for future research on increasing maize lodging resistance under high-density planting conditions and can be used to develop maize cultivation practices and lodging-resistant maize cultivars.展开更多
基金financial support of the National Natural Science Foundation of China(U21A20218 and 32101857)the‘Double First-Class’Key Scientific Research Project of Education Department in Gansu Province,China(GSSYLXM-02)+1 种基金the Fuxi Young Talents Fund of Gansu Agricultural University,China(Gaufx03Y10)the“Innovation Star”Program of Graduate Students in 2023 of Gansu Province,China(2023CXZX681)。
文摘The development of modern agriculture requires the reduction of water and chemical N fertilizer inputs.Increasing the planting density can maintain higher yields,but also consumes more of these restrictive resources.However,whether an increased maize density can compensate for the negative effects of reduced water and N supply on grain yield and N uptake in the arid irrigated areas remains unknown.This study is part of a long-term positioning trial that started in 2016.A split-split plot field experiment of maize was implemented in the arid irrigated area of northwestern China in 2020 to 2021.The treatments included two irrigation levels:local conventional irrigation reduced by 20%(W1,3,240 m^(3)ha^(-1))and local conventional irrigation(W2,4,050 m^(3)ha^(-1));two N application rates:local conventional N reduced by 25%(N1,270 kg ha^(-1))and local conventional N(360 kg ha^(-1));and three planting densities:local conventional density(D1,75,000 plants ha^(-1)),density increased by 30%(D2,97,500 plants ha-1),and density increased by 60%(D3,120,000 plants ha^(-1)).Our results showed that the grain yield and aboveground N accumulation of maize were lower under the reduced water and N inputs,but increasing the maize density by 30% can compensate for the reductions of grain yield and aboveground N accumulation caused by the reduced water and N supply.When water was reduced while the N application rate remained unchanged,increasing the planting density by 30% enhanced grain yield by 13.9% and aboveground N accumulation by 15.3%.Under reduced water and N inputs,increasing the maize density by 30% enhanced N uptake efficiency and N partial factor productivity,and it also compensated for the N harvest index and N metabolic related enzyme activities.Compared with W2N2D1,the N uptake efficiency and N partial factor productivity increased by 28.6 and 17.6%under W1N1D2.W1N2D2 had 8.4% higher N uptake efficiency and 13.9% higher N partial factor productivity than W2N2D1.W1N2D2 improved urease activity and nitrate reductase activity by 5.4% at the R2(blister)stage and 19.6% at the V6(6th leaf)stage,and increased net income and the benefit:cost ratio by 22.1 and 16.7%,respectively.W1N1D2 and W1N2D2 reduced the nitrate nitrogen and ammoniacal nitrogen contents at the R6 stage in the 40-100 cm soil layer,compared with W2N2D1.In summary,increasing the planting density by 30% can compensate for the loss of grain yield and aboveground N accumulation under reduced water and N inputs.Meanwhile,increasing the maize density by 30% improved grain yield and aboveground N accumulation when water was reduced by 20% while the N application rate remained constant in arid irrigation areas.
文摘Mung bean (Vigna radiata L. Wilczek.) is a warm-season, C<sub>3</sub> pulse crop of the legume family that has been widely cultivated in Asian countries. As the demand for mung bean continues to increase in the United States, the ecophysiology, growth, and yield of mung bean varieties in the southeastern US need to be assessed. A field experiment was conducted at the Agricultural Research and Education Center of Tennessee State University to investigate the effects of four varieties (OK2000, Berken, TSU-1, AAMU-1) and three planting densities (5, 10, and 15 cm spacing) on the ecophysiology and yield of mung bean. Results showed that the relative chlorophyll content, plant height, pod dry biomass, pod number, crop yield, and harvest index significantly varied among the varieties. Density only influenced transpiration, relative chlorophyll content, and plant dry biomass. OK2000 had 101.0% more pods per plant and a 42.4% higher harvest index and produced a 45.3% higher yield than other varieties, but no significant difference in yield was found among the other three varieties. This study demonstrated that the mung bean variety OK2000 with a high yield would be ideal for commercial production in the southeastern US.
基金This work was supported by the National Natural Science Foundation of China(31871567)the National Key Research and Development Program of China(2017YFD0300202-2)the Young Scholar of Tang(2017).
文摘Excessive use of nitrogen fertilizer and high planting density reduce grain weight in wheat.However,the effects of high nitrogen and planting density on the filling of grain located in different positions of the wheat spikelet are unknown.A two-year field experiment was conducted to investigate this question and the underlying mechanisms with respect to hormone and carbohydrate activity.Both high nitrogen application and planting density significantly increased spike density,while reducing kernel number per spike and 1000-kernel weight.However,the effects of high nitrogen and high plant density on kernel number per spike and 1000-kernel weight were different.The inhibitory effect of high nitrogen application and high planting density on kernel number per spike was achieved mainly by a reduction in kernel number per spikelet in the top and bottom spikelets.However,the decrease in 1000-kernel weight was contributed mainly by the reduced weight of grain in the middle spikelets.The grain-filling rate of inferior grain in the middle spikelets was significantly decreased under high nitrogen input and high planting density conditions,particularly during the early and middle grain-filling periods,leading to the suppression of grain filling and consequent decrease in grain weight.This effect resulted mainly from inhibited sucrose transport to and starch accumulation in inferior grain in the middle spikelets via reduction of the abscisic acid/ethylene ratio.This mechanism may explain how high nitrogen application and high planting density inhibit the grain filling of inferior wheat grain.
基金the National Key Research and Development Program of China(2016YFD0300103,2017YFD0300603)the Innovation Engineering Plan Project of Jilin Province,China(CXGC2017ZY015)。
文摘To date,little attention has been paid to the effects of leaf source reduction on photosynthetic matter production,root function and post-silking N uptake characteristics at different planting densities.In a 2-year field experiment,Xianyu 335,a widely released hybrid in China,was planted at 60 000 plants ha^(–1 )(conventional planting density,CD) and 90 000 plants ha^(–1) (high planting density,HD),respectively.Until all the filaments protruded from the ear,at which point the plants were subjected to the removal of 1/2 (T1),1/3 (T2) and 1/4 (T3) each leaf length per plant,no leaf removal served as the control(CK).We evaluated the leaf source reduction on canopy photosynthetic matter production and N accumulation of different planting densities.Under CD,decreasing leaf source markedly decreased photosynthetic rate (P_(n)),effective quantum yield of photosystem II (ΦPSII) and the maximal efficiency of photosystem II photochemistry (F_(v)/F_(m)) at grain filling stage,reduced post-silking dry matter accumulation,harvest index (HI),and the yield.Compared with the CK,the 2-year average yields of T1,T2 and T3 treatments decreased by 35.4,23.8 and 8.3%,respectively.Meanwhile,decreasing leaf source reduced the root bleeding sap intensity,the content of soluble sugar in the bleeding sap,post-silking N uptake,and N accumulation in grain.The grain N accumulation in T1,T2 and T3 decreased by 26.7,16.5 and 12.8% compared with CK,respectively.Under HD,compared to other treatments,excising T3 markedly improved the leaf P_(n),ΦPSII and F_(v)/F_(m) at late-grain filling stage,increased the post-silking dry matter accumulation,HI and the grain yield.The yield of T3 was 9.2,35.7 and 20.1% higher than that of CK,T1 and T2 on average,respectively.The T3 treatment also increased the root bleeding sap intensity,the content of soluble sugar in the bleeding sap and post-silking N uptake and N accumulation in grain.Compared with CK,T1 and T2 treatments,the grain N accumulation in T3 increased by 13.1,40.9 and 25.2% on average,respectively.In addition,under the same source reduction treatment,the maize yield of HD was significantly higher than that of CD.Therefore,planting density should be increased in maize production for higher grain yield.Under HD,moderate decreasing leaf source improved photosynthetic performance and increased the post-silking dry matter accumulation and HI,and thus the grain yield.In addition,the improvement of photosynthetic performance improved the root function and promoted postsilking N uptake,which led to the increase of N accumulation in grain.
基金the research grants from the National Natural Science Foundation of China (51379208, 91425302, 51621061)the Government Public Research Funds for Projects of the Ministry of Agriculture (201503125)the Discipline Innovative Engineering Plan (111 Program, B14002)
文摘Field experiments were conducted from 2012 to 2015 in an arid region of Northwest China to investigate the effects of planting density on plant growth, yield, and water use efficiency(WUE) of maize for seed production. Five planting densities of 6.75, 8.25, 9.75, 11.25 and 12.75 plants/m^2 were conducted in 2012, and a planting density of 14.25 plants/m^2 was added from 2013 to 2015. Through comparison with the Aqua Crop yield model, a modified model was developed to estimate the biomass accumulation and yield under different planting densities using adjustment coefficient for normalized biomass water productivity and harvest index. It was found that the modified yield model had a better performance and could generate results with higher determination coefficient and lower error. The results indicated that higher planting density increased the leaf area index and biomass accumulation, but decreased the biomass accumulation per plant. The total yield increased rapidly as planting density increased to 11.25 plants/m^2, but only a slight increase was observed when the density was greater than 11.25 plants/m^2. The WUE also reached the maximum when planting density was 11.25 plants/m^2, which was the recommended planting density of maize for seed production in Northwest China.
基金funded by the Professional (Agriculture) Researching Project for Public Benefit of Ministry of Agriculture,China (3-5)High-Yielding Promotion Project of Ministry of Agriculture,Chinathe National Industrial System Program of Modern Agriculture,China
文摘Cotton yield per unit ground area has stagnated for a dozen years in Hubei Province, China, although a series of new high- yielding varieties have been commercialized. A multi-location investigation was carried out in 2008 and 2009 in 13 counties to determine if increased planting population density (PPD) would break the stagnant yield. The results showed that significant differences among the fields existed in theoretical yield, PPD, and bolls per square meter (BPM). The lowest yield of 1 641.1 kg ha-I was resulted from the lowest PPD of 1.7 plants m-2 and the lowest BPM of 71.8 bolls m-2, while the highest yield of 2 779.7 kg ha-~ was resulted from the highest PPD of 2.5 plants m-2, and the highest BPM of 129.4 bolls m-z. Plant mapping revealed that boll retention rate (BRR) was maintained over 30 or 40% for the first 17-18 fruiting branches (FBs) and decreased dramatically thereafter, rotten boll rate (RBR) decreased, but open boll rate (OBR) rose first and dropped later with rising FB from the bottom to the top. But BRR, RBR, and OBR were all dropped with the fruiting positions (FPs) extending outwards. The optimum range of plant density would be 2-3 plants m-2 and the proper individual plant structure would be 16-19 FBs with 5-7 FPs for cotton production in Hubei Province.
基金financially supported by the National Key Research and Development Program of China(2017YFD0300106,2018YFD0301103,and 2016YFD0300108)the National Key Technologies R&D Program of China during the 12th Five-Year Plan period(2013BAD07B12)the National Natural Science Foundation of China(31601263)。
文摘To address the relationships between the amount of nitrogen fertilizer application and the yield of double cropping rice systems,we investigated the effects of a cultivation pattern of strong seedlings with increased planting density and reduced nitrogen application(SDN)on the morphological and physiological characteristics of double cropping rice.Our results indicated that the effects of SDN on the morphological characteristics of the single plant roots of double cropping rice were not significant,but the morphological characteristics of the population roots were largely different.Specifically,SDN significantly increased the morphological indexes of the root population such as root fresh weight,root volume,root number,root length and root dry weight.The effects of SDN on the total root absorption areas and root active absorption areas of the single plants were non-significant,but it dramatically enhanced the total root absorption areas and root active absorption areas of the plant population during the tillering,heading and mature stages.In addition,SDN significantly increased the root bleeding intensity and elevated the soluble sugar and free amino acid contents of root bleeding sap.Compared to the traditional cultivation pattern(CK),SDN significantly increased root bleeding intensity at the heading stage by 4.37 and 8.90% for early and late rice,respectively.Meanwhile,SDN profoundly enhanced the soluble sugar contents of root bleeding sap by 12.85 and 10.41% for early and late rice,respectively.In addition,SDN also significantly enhanced free amino acid content of root bleeding sap by 43.25% for early rice and by 37.50% for late rice systems compared to CK.Furthermore,SDN increased the actual yield of double cropping rice mainly due to the higher effective panicle number and the larger seedsetting rate.The actual yields of early rice under SDN were higher than CK by 9.37 and 5.98% in 2016 and 2017,and the actual yields of late rice under SDN were higher than CK by 0.20 and 1.41% in 2016 and 2017,respectively.Correlation analysis indicated that the significant positive correlations were observed between the majority of the root indexes and the actual yield across the four different growth stages.
基金supported by projects funded by the China Postdoctoral Science Foundation(2019M663837 and 2021M701521)the National High-Tech Research and Development Programs of China(2013AA102902)the special fund for Agro-scientific Research in the Public Interest,China(201303104)。
文摘Lodging in maize leads to yield losses worldwide.In this study,we determined the effects of traditional and optimized nitrogen management strategies on culm morphological characteristics,culm mechanical strength,lignin content,root growth,lodging percentage and production in maize at a high plant density.We compared a traditional nitrogen(N)application rate of 300 kg ha–1(R)and an optimized N application rate of 225 kg ha^(–1)(O)under four N application modes:50%of N applied at sowing and 50%at the 10th-leaf stage(N1);100%of N applied at sowing(N2);40%of N applied at sowing,40%at the 10th-leaf stage and 20%at tasseling stage(N3);and 30%of N applied at sowing,30%at the 10th-leaf stage,20%at the tasseling stage,and 20%at the silking stage(N4).The optimized N rate(225 kg ha^(–1))significantly reduced internode lengths,plant height,ear height,center of gravity height and lodging percentage.The optimized N rate significantly increased internode diameters,filling degrees,culm mechanical strength,root growth and lignin content.The application of N in four split doses(N4)significantly improved culm morphological characteristics,culm mechanical strength,lignin content,and root growth,while it reduced internode lengths,plant height,ear height,center of gravity height and lodging percentage.Internode diameters,filling degrees,culm mechanical strength,lignin content,number and diameter of brace roots,root volume,root dry weight,bleeding safe and grain yield were significantly negatively correlated with plant height,ear height,center of gravity height,internode lengths and lodging percentage.In conclusion,treatment ON4 significantly reduced the lodging percentage by improving the culm morphological characteristics,culm mechanical strength,lignin content,and root growth,so it improved the production of the maize crop at a high plant density.
基金The work was supported by the National Key Research and Development Program of China(Grant Number 2016YFD0600402).
文摘Poplar is raw material for various panel, paper and fiber products. The 12 sample trees of clone Nanlin-895 from four spacings were destructively harvested after thirteen growing seasons to assess the influence of spacing on radial growth and wood properties. Spacing significantly affected tree-ring width and wood basic density (p < 0.05) but not fiber traits. The highest diameter and wood basic density at breast height (1.3 m) was in 6 m × 6 m and 3 m × 8 m spacings, respectively. However, no significant differences in tree-ring width, wood basic density and fiber traits were observed among the four sampling directions in discs taken at 1.3 m for each spacing. Growth rings from the pith and tree heights had significant effects on wood basic density and fiber anatomical characteristics, highlighting obvious temporal-spatial variations. Pearson correlation analysis showed a significantly negative relationship of tree-ring width to wood basic density, fiber length and fiber width, but a significantly positive relationship to hemicellulose. There was no relationship with cellulose and lignin contents. Based on a comprehensive assessment by the TOPSIS method, the 6 m × 6 m spacing is recommended for producing wood fiber at similar sites in the future.
基金the 2020 Research Program of Sanya Yazhou Bay Science and Technology City,China(SKJC-2020-02-005)the Agricultural Science and Technology Innovation Program(ASTIP)of Chinese Academy of Agricultural Sciences(CAAS-ZDRW202004 and CAAS-ZDRW202109).
文摘Increasing the planting density is one way to enhance grain production in maize.However,high planting density brings about growth and developmental defects such as barrenness,which is the major factor limiting grain yield.In this study,the barrenness was characterized in an association panel comprising 280 inbred lines under normal(67500 plants ha–1,ND)and high(120000 plants ha–1,HD)planting densities in 2017 and 2018.The population was genotyped using 776254 single nucleotide polymorphism(SNP)markers with criteria of minor allele frequency>5%and<20%missing data.A genome-wide association study(GWAS)was conducted for barrenness under ND and HD,as well as the barrenness ratio(HD/ND),by applying a Mixed Linear Model that controls both population structure and relative kinship(Q+K).In total,20 SNPs located in nine genes were significantly(P<6.44×10–8)associated with barrenness under the different planting densities.Among them,seven SNPs for barrenness at ND and HD were located in two genes,four of which were common under both ND and HD.In addition,13 SNPs for the barrenness ratio were located in seven genes.A complementary pathway analysis indicated that the metabolic pathways of amino acids,such as glutamate and arginine,and the mitogen-activated protein kinase(MAPK)signaling pathway might play important roles in tolerance to high planting density.These results provide insights into the genetic basis of high planting density tolerance and will facilitate high yield maize breeding.
基金supported by the National Natural Science Foundation of China(grant no.31960385)the Natural Science Foundation of Jiangxi,China(grant no.20212BAB215009)。
文摘Background Mepiquat chloride(MC)application and plant population density(PPD)increasing are required for modern cotton production.However,their interactive effects on leaf physiology and carbohydrate metabolism remain obscure.This study aimed to examine whether and how MC and PPD affect the leaf morpho-physiological characteristics,and thus final cotton yield.PPD of three levels(D1:2.25 plants·m^(-2),D2:4.5 plants·m^(-2),and D3:6.75 plants·m^(-2))and MC dosage of two levels(MC0:0 g·ha^(-2),MC1:82.5 g·ha^(-2))were combined to create six treatments.The dynamics of nonstructual carbohydrate concentration,carbon metabolism-related enzyme activity,and photosynthetic attributes in cotton leaves were examined during reproductive growth in 2019 and 2020.Results Among six treatments,the high PPD of 6.75 plants·m^(-2)combined with MC application(MC1D3)exhibited the greatest seed cotton yield and biological yield.The sucrose,hexose,starch,and total nonstructural carbohydrate(TNC)concentrations peaked at the first flowering(FF)stage and then declined to a minimum at the first boll opening(FBO)stage.Compared with other treatments,MC1D3 improved starch and TNC concentration by 5.4%~88.4%,7.8%~52.0% in 2019,and by 14.6%~55.9%,13.5%~39.7% in 2020 at the FF stage,respectively.Additionally,MC1D3 produced higher transformation rates of starch and TNC from the FF to FBO stages,indicating greater carbon production and utilization efficiency.MC1D3 displayed the maximal specific leaf weight(SLW)at the FBO stage,and the highest chlorophyll a(Chl a),Chl b,and Chl a+b concentration at the mid-late growth phase in both years.The Rubisco activity with MC1D3 was 2.6%~53.2% higher at the flowering and boll setting stages in both years,and 2.4%~52.7% higher at the FBO stage in 2020 than those in other treatments.These results provided a explanation of higher leaf senescence-resistant ability in MC1D3.Conclusion Increasing PPD coupled with MC application improves cotton yield by enhancing leaf carbohydrate production and utilization efficiency and delaying leaf senescence.
基金supported by the National Key R&D Program of China(2016YFD0101002)the National Natural Science Foundation of China(32072068)the Central Public-interest Scientific Institution Basal Research Fund,China(1610392021001)。
文摘Increasing the planting density is an effective way to increase the yield of maize(Zea mays L.),although it can also aggravate ovary apical abortion-induced bald tips of the ears,which might,in turn,reduce the yield.While the mechanism underlying the regulation of drought-related abortion in maize is well established,high planting density-related abortion in maize remains poorly understood.Therefore,the present study was designed to investigate the mechanism underlying the ovary apical abortion response to high density.This was achieved by evaluating the effects of four different plant densities(60000 plants ha^(–1)(60 k),90 k,120 k,and 150 k)on plant traits related to plant architecture,the plant ear,flowering time,and silk development in two inbred lines(Zheng58 and PH4CV)and two hybrid lines(Zhengdan958 and Xianyu335).The phenotypes of both inbred and hybrid plants were observed under different planting density treatments,and the high planting density was found to increase the phenotypic performance values of the evaluated traits.The anthesis–silking interval(ASI)was extended,and the amount of the silk extruded from husks was reduced upon increasing the planting density.Delayed silk emergence resulted in asynchronous flowering and ear bald tips.Observations of the silk cells revealed that the silk cells became smaller as planting density increased.The changes in transcript abundances in the silks involved the genes associated with expansive growth rather than carbon metabolism.These findings further our understanding of silk growth regulation under high planting density and provide a theoretical basis for further research on improving high planting density breeding in maize.
基金Supported by Fund of Popularization and Demonstration of Mixed Sowing of Forage Beans and Silage Corn to Improve Green Feeding Quality of Dairy Cows(2015RQXXJ013)。
文摘Forage soybean is an important source of high protein forage.Variety screening and breeding not only can solve the adjustment of agricultural planting structure,but also can provide a large amount of high-protein forage material,and effectively solve the problem of a serious shortage of high-protein forage in herbivorous animal husbandry in China.In this study,the feeding-type soybean strain HN389 was selected as experimental material,with three planting densities of 270000,405000 and 540000 plants•hm^(-2) and three cutting periods of the initial pod stage(R1),the initial grain stage(R2)and the early mature stage(R3)were set to determine the yield and feeding quality,in order to obtain the best planting density and harvest time of the variety.The results showed that in forage soybean strain HN389 at the R1 and R2 stages,plant height increased with increasing planting densities,while fresh and dry weight per plant decreased with increasing planting densities,and there was no significant difference at the R3 stage.The yield of hay at the R1,R2 and R3 stages increased firstly and then decreased with the increase of planting densities,and the yield per hectare was R3>R2>R1.The order of contents of crude protein(CP),neutral detergent fibers(NDF)and acid detergent fiber(ADF)in feeding quality of HN389 were R2>R1>R3,and ether extract(EE)content order was R3>R1>R2,and there was no significant difference among different groups.Two principal components were extracted from five forage indexes including CP,NDF,ADF,EE and fresh grass yield by principal component analysis.The cumulative contribution rate of principal components 1 and 2 was 90.053%,and their characteristic values were 3.617 and 0.885,respectively.After a comprehensive evaluation,harvested at the R3 stage and the density was 405000 plants•hm^(-2),HN389 had the highest comprehensive score of 0.344,yield of 38035.53 kg•hm^(-2),CP,NDF,ADF and EE contents of 17.61%,17.61%,21.54%and 3.81%,respectively.
基金Ningxia Natural Science Foundation(NZ15270)National Agriculture Research System of Oat and Buckwheat(CARS-08-E-5).
文摘Ningqiao 1 was selected as the material to study the effects of planting density on physiological indices,agronomic traits and yield of buckwheat.The results showed that high density resulted in decreases of chlorophyll content,soluble protein content and activity of SOD,POD and CAT,and acceleration of MDA accumulation under drought conditions.Low density could effectively improve the grain number per plant,grain weight per plant,1000-grain weight and yield in drought conditions.
基金Supported by National Modern Agricultural Technology System for Wheat(CARS-3-2-22)Special Research Fund for National Public Service Sector(Agriculture)(201203033)+1 种基金Modern Agricultural Industry Technology System Project(nycytx-03)Shandong Modern Agricultural Industry Technology System(SDAIT-04-021-12)
文摘To get the cultivation pattern featured by improved varieties and fine methods for strong-gluten and high-yielding wheat variety Taishan 27,this paper used Taishan 27 as material to study the effect of fertilizing amount and planting density on yield and quality of material.The results showed that Taishan 27 had high yield under fertilizing amount of 225 kg/ha pure nitrogen and planting density of 240 × 104-300× 10~4/ha; the yield was lowest under fertilizing amount of 300 kg/ha pure nitrogen and planting density of 360 × 10~4/ha. The suitable planting density for Taishan 27 was 240 × 104-300 × 10~4/ha,and the fertilizing amount of nitrogen should be based on different soil fertility conditions to avoid water and fertilizer stress and improve yield.
基金Supported by Key R&D Projects in Hebei Province(19227527D)Science and Technology Innovation Team Project of Hebei Coarse Grain and Soybean Seed Industry。
文摘[Objectives]To study the optimum sowing density of quinoa in Chengde region.[Methods]Yanli No.2 cultivated by Institute of Millet Crops,Hebei Academy of Agriculture and Forestry Sciences was taken as test material.In Chengde region,single-factor density test design was used to study the effects of sowing on agronomic characters and yield of quinoa.[Results]Quinoa had the highest comprehensive yield when row spacing was 30 cm and plant spacing was 25 cm.[Conclusions]The research could provide theoretical basis for quinoa planting in Chengde region.
基金Supported by Special Fund for Agro-scientific Researchin the Public Interest(20120304201)
文摘[ Objective] This study was conducted to investigate the relationship between each of planting density and row spacing and plant productivity of forage sweet sorghum planted in autumn idle land. [ Methods] Using split-plot experiment design experiment method and LSD method of IBM. SPSS. Statistics. v22 statistics software, the effects of planting density and row spacing on plant productivity of forage sweet sorghum planted in autumn idle land were compared. [ Result] The results showed that the planting density and row spacing had important influences on plant productivity of forage sweet sorghum planted in autumn idle land. Moreover, the optimal combination of plant productivity for A1B4 , i. e. ,under the combination of the planting density of 7.5 × 10^4 plants/hm^2 and the row spacing of 40 cm, the fresh weight and dry weight per plant were 654.37 and 147.11 g/plant, respectively. [ Conclusion ] The results provided a theoretical basis for the production of forage sweet sorghum in autumn idle land.
基金supported by the National Natural Science Foundation of China(32301453 and 3272675)the China Postdoctoral Science Foundation(2023M730682)。
文摘Achieving high maize yields and efficient phosphorus(P)use with limited environmental impacts is one of the greatest challenges in sustainable maize production.Increasing plant density is considered an effective approach for achieving high maize yields.However,the low mobility of P in soils and the scarcity of natural P resources have hindered the development of methods that can simultaneously optimize P use and mitigate the P-related environmental footprint at high plant densities.In this study,meta-analysis and substance flow analysis were conducted to evaluate the effects of different types of mineral P fertilizer on maize yield at varying plant densities and assess the flow of P from rock phosphate mining to P fertilizer use for maize production in China.A significantly higher yield was obtained at higher plant densities than at lower plant densities.The application of single superphosphate,triple super-phosphate,and calcium magnesium phosphate at high plant densities resulted in higher yields and a smaller environmental footprint than the application of diammonium phosphate and monoammonium phosphate.Our scenario analyses suggest that combining the optimal P type and application rate with a high plant density could increase maize yield by 22%.Further,the P resource use efficiency throughout the P supply chain increased by 39%,whereas the P-related environmental footprint decreased by 33%.Thus,simultaneously optimizing the P type and application rate at high plant densities achieved multiple objectives during maize production,indicating that combining P management with cropping techniques is a practical approach to sustainable maize production.These findings offer strategic,synergistic options for achieving sustainable agricultural development.
基金supported by the China Ningxia Key Research and Development Project(Grant No.2022BEG02004).
文摘Increasing the planting density can exacerbate crop competition for water,nutrients and space which results in a decline in the crop yields.However,the effect of increasing planting density on crop growth and soil biological characteristics in barren sandy land in the semi-arid regions are still unclear.In this study,we investigated the effects of six planting densities(5.4×10^(4),6.45×10^(4),7.95×10^(4),9.5×10^(4),9.75×10^(4) and 10.5×10^(4) plants/hm^(2))on maize growth,photosynthesis characteristics,yield and soil biological characteristics in barren sandy soil in the semi-arid region of Ningxia,China.The results indicated that the stem diameter and spike length decreased linearly with increasing planting density.The plant height,spike weight,grain weight and 100-grain weight decreased with increasing plating density.Moreover,the root length increased with increasing planting density.The diameter,volume and activity increased and then decreased with increasing planting density.There was no significant difference(p>0.05)in the effect of planting density on transpiration rate intercellular CO_(2) concentration.As well,the soil microbial biomass carbon and microbial biomass nitrogen decreased with increasing planting density.The soil catalase activities increased and then decreased with increasing planting density.The alkaline phosphatase activity,the amounts of soil bacteria and actinomycetes increased with increasing planting density.Generally,a moderately increasing planting density can improve maize yield when water and nutrients are sufficient.The optimal planting density was 8.29×10^(4) plants/hm^(2) and the highest yield was 15.84 t/hm^(2) in barren sandy soil in semi-arid region of Ningxia,China.This study provides a theoretical basis for high yield and high efficiency of maize.
基金supported by the National Basic Research Program of China (973 Program, 2015CB150401)the National Key Research and Development Program of China (2016YFD0300101)the National Maize Industrial Technology System, China
文摘Increasing plant density is an effective way to enhance maize yield, but often increases lodging rate and severity, significantly elevating the risk and cost of maize production. Therefore, lodging is a major factor restricting future increases in maize yield through high-density planting. This paper reviewed previous research on the relationships between maize lodging rate and plant morphology, mechanical strength of stalks, anatomical and biochemical characteristics of stalks, root characteristics, damage from pests and diseases, environmental factors, and genomic characteristics. The effects of planting density on these factors and explored possible ways to improve lodging resistance were also analyzed in this paper. The results provide a basis for future research on increasing maize lodging resistance under high-density planting conditions and can be used to develop maize cultivation practices and lodging-resistant maize cultivars.