The present study characterized NbSi2-Al2O3 nanocomposite powders plasma-sprayed on Ti-6Al-4Vsubstrates. The powders were agglomerated to obtain suitable particle sizes for spraying. The agglomerated powders were then...The present study characterized NbSi2-Al2O3 nanocomposite powders plasma-sprayed on Ti-6Al-4Vsubstrates. The powders were agglomerated to obtain suitable particle sizes for spraying. The agglomerated powders were then plasma-sprayed using atmospheric plasma spraying. The structural transformations of the powders along with the morphological and mechanical changes of the coatings were examined by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, and hard- ness testing. The results showed that after plasma spraying, the grain size increased, and the lattice strain decreased. However, the grain size of this compound after spraying was still in the nanometer range. The coating was uniform and exhibited good adhesion to the substrate. The microhardness and fracture toughness of the nanocomposite coating were higher than those of a nanostructured NbSi2 coating.展开更多
The thermal barrier coatings with NiCrAlY alloy bonding layer, NiCrAlY Y 2O 3 stabilized ZrO 2 transition layer and Y 2O 3 stabilized ZrO 2 ceramic layer are prepared on nickel alloy substrates using the plasma spray ...The thermal barrier coatings with NiCrAlY alloy bonding layer, NiCrAlY Y 2O 3 stabilized ZrO 2 transition layer and Y 2O 3 stabilized ZrO 2 ceramic layer are prepared on nickel alloy substrates using the plasma spray technique. The relationship among the composition, structure and property of the coatings are investiga ted by means of optical microscope, scanning electronic microscope and the experiments of thermal shock resistance cycling and high temperature oxidation resistance. The results show that the structure design of introdu cing a transition layer between Ni alloy substrate and ZrO 2 ceramic coating guarantees the high quality and properties of the coatings; ZrO 2 coatings doped with a little SiO 2 possesses better thermal shock resistance and more excellent hot corrosion resistance as compared with ZrO 2 coating materials without SiO 2 ;the improvement in performance of ZrO 2 coating doped with SiO 2 is due to forming more dense coating structure by self closing effects of the flaws and pores in the ZrO 2 coatings.展开更多
Surface treatment of engineering materials has recently become important for serviceable engineering components.Many techniques such as thermal and thermo chemical surface treatments have been used to develop surface ...Surface treatment of engineering materials has recently become important for serviceable engineering components.Many techniques such as thermal and thermo chemical surface treatments have been used to develop surface characteristics of materials.Hardness is the most important property,which influences considerably service life characteristics of coatings.In this investigation,alumina coatings were deposited by atmospheric plasma spray technique under different levels of power,stand-off distances and powder feed rates.Empirical relationship was developed to predict the micro hardness of alumina coatings by incorporating the plasma spray process parameters.The input power and the stand-off distance appeared to be the most significant two parameters affecting the hardness of the coating among the three investigated process parameters.Further,correlating the spray parameters with coating properties enables the identification of characteristics regime to achieve desired quality of coatings.展开更多
In order to reduce the friction coefficient of Ni-base alloy coating and further improve its wear resistance,Ni-base alloy composite coatings modified by both graphite and TiC particles were prepared by plasma spray t...In order to reduce the friction coefficient of Ni-base alloy coating and further improve its wear resistance,Ni-base alloy composite coatings modified by both graphite and TiC particles were prepared by plasma spray technology on the surface of 45 carbon steel.The results show that friction coefficient of the composite coating is 47.45% lower than that of the Ni-base alloy coating,and the wear mass loss is reduced by 59.1%.Slip lines and severe adhesive plastic deformation are observed on the worn surface of the Ni-base alloy coating,indicating that the wear mechanisms of the Ni-base alloy coating are multi-plastic deformation wear and adhesive wear.A soft transferred layer abundant in graphite and ferric oxide is developed on the worn surface of the composite coating,which reduces the friction coefficient and wear loss in a great deal.The main wear mechanism of the composite coating is fatigue delamination of the transferred layer.展开更多
Ceramic coatings were prepared on Ti-6Al-4V alloy in NaAlO2 solution by micro-plasma oxidation （MPO）. The salt spray tests of the coated samples and the substrates were carded out in a salt spray test machine. The p...Ceramic coatings were prepared on Ti-6Al-4V alloy in NaAlO2 solution by micro-plasma oxidation （MPO）. The salt spray tests of the coated samples and the substrates were carded out in a salt spray test machine. The phase composition and surface morphology of the coatings were investigated by XRD and SEAM. Severe corrosion occurred on the substrate surface, while there were no obvious corrosion phenomena on the coated samples. The coatings were composed of Al2TiO5 and a little α-Al2O3 and mille TiO2, and the salt spray test did not change the composition of the coatings. The weight loss rate of the coatings decreased with increasing MPO time because of the increase in density and thickness of the coatings. The surface morphology of the coatings was influenced by salt spray corrosion test. Among the coated samples, the coating prepared for 2 h has the best corrosion resistance under salt spray test.展开更多
As the important evaluation parameters concerning the spray qualities, the porosity and surface roughness of the coatings obtained by thermal spray forming have great influence on their forming accuracy, mechanical pr...As the important evaluation parameters concerning the spray qualities, the porosity and surface roughness of the coatings obtained by thermal spray forming have great influence on their forming accuracy, mechanical properties and service lifetime. But it is difficult to predict or control the two parameters for such a highly nonlinear process. A two-dimensional simulation of coating porosity and surface roughness of nickel-aluminum alloy (Ni-5%Al) in plasma spray forming was presented, which was based on the multi-dimensional statistical behaviors of the droplets as well as the simplification and digitization of the typical splat cross sections. Further analysis involving the influence of the droplet diameters and the scanning velocities of the spray gun on the two parameters was conducted. The simulation and analysis results indicate that the porosity and surface roughness are more influenced by the droplet diameters, but less influenced by the spray gun velocities. The results will provide basis for the prediction or control of coating mechanical properties by depositing parameters.展开更多
The NiCrAlY+ZrO2 thermal barrier coating was prepared on the surface of TiAl alloy by plasma spraying technique. The microstructure and phase structure were analyzed using scanning electron microscopy(SEM) and X-ray d...The NiCrAlY+ZrO2 thermal barrier coating was prepared on the surface of TiAl alloy by plasma spraying technique. The microstructure and phase structure were analyzed using scanning electron microscopy(SEM) and X-ray diffractometry(XRD). The high temperature oxidation resistance of the plasma sprayed samples at 850℃ was investigated. The results show that the bonding between thermal barrier coating and substrate is very good. Surface hardness of TiAl alloy is improved too. The microhardness of the coating surface is about HV 900 after the oxidation test at 850 ℃ . The oxidation resistance of the samples is improved remarkably.展开更多
An oxidation resistant Al-Cu-Fe quasicrystalline coating was fabricated on substrate of Ti alloy by low pressure plasma spraying (LPPS) method. As-sprayed Al-Cu-Fe coating has a rapidly solidified lamellar microstruct...An oxidation resistant Al-Cu-Fe quasicrystalline coating was fabricated on substrate of Ti alloy by low pressure plasma spraying (LPPS) method. As-sprayed Al-Cu-Fe coating has a rapidly solidified lamellar microstructure consisting of quasicrystalline phase and crystalline phase. The formation of quasicrystalline coating is related to the annealing. The results from the ox!dat!on experiments showed that Al-Cu-Fe quasicrystalline coating improved the oxidation resistance of Ti-base alloys. During the oxidation period there is no evident spallation of the coating from the substrate. Oxide formed on the surface of Al-Cu-Fe quasicrystalline coating after oxidation consisted of Al2O3. Oxidation occurs Ieading to a change of concentration and phase transformation in the coating surface. Selective oxidation of AI transforms the quasicrystalline phase into the phase.展开更多
TiO2-hydroxyapatite （HA） nanostructured coatings were produced by atmospheric plasma spray method. The effects of starting powder composition and grain size on their mechanical properties were investigated. The micr...TiO2-hydroxyapatite （HA） nanostructured coatings were produced by atmospheric plasma spray method. The effects of starting powder composition and grain size on their mechanical properties were investigated. The microstructure and morphology were characterized by X-ray diffraction and scanning electron microscopy （SEM）. It is found that the coating with 10% HA has the best mechanical properties. Based on Rietveld refinement method, the mean grain size of the as-received powder （212 nm） extensively decreases to 66.4 nm after 20 h of high-energy ball milling. In spite of grain growth, the deposited coatings maintain their nanostructures with the mean grain size of 112 nm. SEM images show that there is a lower porosity in the coating with a higher HA content. Optical microscopy images show that uniform thickness is obtained for all the coatings.展开更多
The oxidation and hot corrosion behaviors of HVAF-sprayed conventional and nanostructured NiCrC coatings were studied.The oxidation experiment was conducted in air,and the hot corrosion was conducted in the Na2SO4-30%...The oxidation and hot corrosion behaviors of HVAF-sprayed conventional and nanostructured NiCrC coatings were studied.The oxidation experiment was conducted in air,and the hot corrosion was conducted in the Na2SO4-30%K2SO4 environment, in the temperature range of 550-750℃for periods up to 160 h.The corrosion kinetics was tested with the thermogravimetric method. The corrosion products were characterized by scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDX)and X-ray diffractometry(XRD).As indicated by the results,both types of coatings possess high corrosion resistance,especially the nanostructured NiCrC coating.The enhanced grain boundary diffusion in the nanostructured coating not only promotes the formation of a denser Cr2O3 scale with a higher rate,but also helps to mitigate the Cr depletion at the metal/scale interface.The less porosity of the nanostructured coating is also thought to be beneficial to the anti-corrosion properties.展开更多
文摘The present study characterized NbSi2-Al2O3 nanocomposite powders plasma-sprayed on Ti-6Al-4Vsubstrates. The powders were agglomerated to obtain suitable particle sizes for spraying. The agglomerated powders were then plasma-sprayed using atmospheric plasma spraying. The structural transformations of the powders along with the morphological and mechanical changes of the coatings were examined by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, and hard- ness testing. The results showed that after plasma spraying, the grain size increased, and the lattice strain decreased. However, the grain size of this compound after spraying was still in the nanometer range. The coating was uniform and exhibited good adhesion to the substrate. The microhardness and fracture toughness of the nanocomposite coating were higher than those of a nanostructured NbSi2 coating.
文摘The thermal barrier coatings with NiCrAlY alloy bonding layer, NiCrAlY Y 2O 3 stabilized ZrO 2 transition layer and Y 2O 3 stabilized ZrO 2 ceramic layer are prepared on nickel alloy substrates using the plasma spray technique. The relationship among the composition, structure and property of the coatings are investiga ted by means of optical microscope, scanning electronic microscope and the experiments of thermal shock resistance cycling and high temperature oxidation resistance. The results show that the structure design of introdu cing a transition layer between Ni alloy substrate and ZrO 2 ceramic coating guarantees the high quality and properties of the coatings; ZrO 2 coatings doped with a little SiO 2 possesses better thermal shock resistance and more excellent hot corrosion resistance as compared with ZrO 2 coating materials without SiO 2 ;the improvement in performance of ZrO 2 coating doped with SiO 2 is due to forming more dense coating structure by self closing effects of the flaws and pores in the ZrO 2 coatings.
文摘Surface treatment of engineering materials has recently become important for serviceable engineering components.Many techniques such as thermal and thermo chemical surface treatments have been used to develop surface characteristics of materials.Hardness is the most important property,which influences considerably service life characteristics of coatings.In this investigation,alumina coatings were deposited by atmospheric plasma spray technique under different levels of power,stand-off distances and powder feed rates.Empirical relationship was developed to predict the micro hardness of alumina coatings by incorporating the plasma spray process parameters.The input power and the stand-off distance appeared to be the most significant two parameters affecting the hardness of the coating among the three investigated process parameters.Further,correlating the spray parameters with coating properties enables the identification of characteristics regime to achieve desired quality of coatings.
文摘In order to reduce the friction coefficient of Ni-base alloy coating and further improve its wear resistance,Ni-base alloy composite coatings modified by both graphite and TiC particles were prepared by plasma spray technology on the surface of 45 carbon steel.The results show that friction coefficient of the composite coating is 47.45% lower than that of the Ni-base alloy coating,and the wear mass loss is reduced by 59.1%.Slip lines and severe adhesive plastic deformation are observed on the worn surface of the Ni-base alloy coating,indicating that the wear mechanisms of the Ni-base alloy coating are multi-plastic deformation wear and adhesive wear.A soft transferred layer abundant in graphite and ferric oxide is developed on the worn surface of the composite coating,which reduces the friction coefficient and wear loss in a great deal.The main wear mechanism of the composite coating is fatigue delamination of the transferred layer.
基金the National Natural Science Foundation of China (No. 50171026)the Natu-ral Science Foundation of Heilongjiang Province, China (No. E2007-36).
文摘Ceramic coatings were prepared on Ti-6Al-4V alloy in NaAlO2 solution by micro-plasma oxidation （MPO）. The salt spray tests of the coated samples and the substrates were carded out in a salt spray test machine. The phase composition and surface morphology of the coatings were investigated by XRD and SEAM. Severe corrosion occurred on the substrate surface, while there were no obvious corrosion phenomena on the coated samples. The coatings were composed of Al2TiO5 and a little α-Al2O3 and mille TiO2, and the salt spray test did not change the composition of the coatings. The weight loss rate of the coatings decreased with increasing MPO time because of the increase in density and thickness of the coatings. The surface morphology of the coatings was influenced by salt spray corrosion test. Among the coated samples, the coating prepared for 2 h has the best corrosion resistance under salt spray test.
基金Project(50675072) supported by the National Natural Science Foundation of ChinaProject(2006J0165) supported by the Natural Science Foundation of Fujian Province of ChinaProject(20062178) supported by the Natural Science Foundation of Liaoning Province of China
文摘As the important evaluation parameters concerning the spray qualities, the porosity and surface roughness of the coatings obtained by thermal spray forming have great influence on their forming accuracy, mechanical properties and service lifetime. But it is difficult to predict or control the two parameters for such a highly nonlinear process. A two-dimensional simulation of coating porosity and surface roughness of nickel-aluminum alloy (Ni-5%Al) in plasma spray forming was presented, which was based on the multi-dimensional statistical behaviors of the droplets as well as the simplification and digitization of the typical splat cross sections. Further analysis involving the influence of the droplet diameters and the scanning velocities of the spray gun on the two parameters was conducted. The simulation and analysis results indicate that the porosity and surface roughness are more influenced by the droplet diameters, but less influenced by the spray gun velocities. The results will provide basis for the prediction or control of coating mechanical properties by depositing parameters.
基金Project(20061D0500500151) supported by Beijing Excellent Talent Nurture and Sponsor Project
文摘The NiCrAlY+ZrO2 thermal barrier coating was prepared on the surface of TiAl alloy by plasma spraying technique. The microstructure and phase structure were analyzed using scanning electron microscopy(SEM) and X-ray diffractometry(XRD). The high temperature oxidation resistance of the plasma sprayed samples at 850℃ was investigated. The results show that the bonding between thermal barrier coating and substrate is very good. Surface hardness of TiAl alloy is improved too. The microhardness of the coating surface is about HV 900 after the oxidation test at 850 ℃ . The oxidation resistance of the samples is improved remarkably.
文摘An oxidation resistant Al-Cu-Fe quasicrystalline coating was fabricated on substrate of Ti alloy by low pressure plasma spraying (LPPS) method. As-sprayed Al-Cu-Fe coating has a rapidly solidified lamellar microstructure consisting of quasicrystalline phase and crystalline phase. The formation of quasicrystalline coating is related to the annealing. The results from the ox!dat!on experiments showed that Al-Cu-Fe quasicrystalline coating improved the oxidation resistance of Ti-base alloys. During the oxidation period there is no evident spallation of the coating from the substrate. Oxide formed on the surface of Al-Cu-Fe quasicrystalline coating after oxidation consisted of Al2O3. Oxidation occurs Ieading to a change of concentration and phase transformation in the coating surface. Selective oxidation of AI transforms the quasicrystalline phase into the phase.
文摘TiO2-hydroxyapatite （HA） nanostructured coatings were produced by atmospheric plasma spray method. The effects of starting powder composition and grain size on their mechanical properties were investigated. The microstructure and morphology were characterized by X-ray diffraction and scanning electron microscopy （SEM）. It is found that the coating with 10% HA has the best mechanical properties. Based on Rietveld refinement method, the mean grain size of the as-received powder （212 nm） extensively decreases to 66.4 nm after 20 h of high-energy ball milling. In spite of grain growth, the deposited coatings maintain their nanostructures with the mean grain size of 112 nm. SEM images show that there is a lower porosity in the coating with a higher HA content. Optical microscopy images show that uniform thickness is obtained for all the coatings.
基金Project(2002AA331080)supported by the National High-tech Research and Development Program of China
文摘The oxidation and hot corrosion behaviors of HVAF-sprayed conventional and nanostructured NiCrC coatings were studied.The oxidation experiment was conducted in air,and the hot corrosion was conducted in the Na2SO4-30%K2SO4 environment, in the temperature range of 550-750℃for periods up to 160 h.The corrosion kinetics was tested with the thermogravimetric method. The corrosion products were characterized by scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDX)and X-ray diffractometry(XRD).As indicated by the results,both types of coatings possess high corrosion resistance,especially the nanostructured NiCrC coating.The enhanced grain boundary diffusion in the nanostructured coating not only promotes the formation of a denser Cr2O3 scale with a higher rate,but also helps to mitigate the Cr depletion at the metal/scale interface.The less porosity of the nanostructured coating is also thought to be beneficial to the anti-corrosion properties.
