It is reported that the highly dispersed Pt nanoparticles on carbon nanotubes can be synthesized under mild conditions by in situ plasma treatment.The carbon nanotube was pretreated by O_2 plasma to transform into oxi...It is reported that the highly dispersed Pt nanoparticles on carbon nanotubes can be synthesized under mild conditions by in situ plasma treatment.The carbon nanotube was pretreated by O_2 plasma to transform into oxide carbon nanotubes（O-CNTs）,and then it was mixed with the precursors（the mixture of H_2 PtCl_6and PdCl_6）.After that,the O-CNTs and the precursors were simultaneously treated by H_2 plasma.The precursors were transformed into Pt-Pd nanoparticles（NPs）and the O-CNTs transformed into CNT.The synthesized CNT-based Pt-Pd nanoparticles were characterized by scanning electron microscopy,transmission electron microscopy,X-ray diffraction and X-ray photoelectron spectroscopy.All the analysis showed that the Pt-Pd nanoparticles were deposited on CNT as a form of face-centered cubical structure.展开更多
Hydrogen dielectric-barrier discharge (H<sub>2</sub>-DBD) plasma was successfully used to prepare carbon nanotubes (CNTs)-supported cobalt (Co) catalyst. The H<sub>2</sub>-DBD plasma treatment ...Hydrogen dielectric-barrier discharge (H<sub>2</sub>-DBD) plasma was successfully used to prepare carbon nanotubes (CNTs)-supported cobalt (Co) catalyst. The H<sub>2</sub>-DBD plasma treatment simultaneously decomposed and reduced the cobalt precursor at a lower temperature and in a shorter time than the conventional method (calcination and hydrogen reduction). It is considered that the H<sub>2</sub>-DBD plasma method can remarkably decrease the amount of energy input compared to traditional methods used to prepare the Co-based catalyst in Fischer-Tropsch synthesis (FTS). Results showed that the Co catalyst prepared by H<sub>2</sub>-DBD plasma had an equivalent catalytic performance for FTS as that prepared using the conventional method in calcination and hydrogen reduction, thereby determining that H<sub>2</sub>-DBD plasma was an effective alternative treatment for preparing the Co/CNTs catalyst for FTS. This technology will provide a new strategy for preparing catalysts in other catalysis processes.展开更多
We used a chemical reduction method to synthesize the catalysts of cobalt(Co) and cobalt-ruthenium(Co-Ru) bifunctional supported on carbon nanotubes(CNTs) for Fischer–Tropsch synthesis(FTS) in a fixedbed reactor. The...We used a chemical reduction method to synthesize the catalysts of cobalt(Co) and cobalt-ruthenium(Co-Ru) bifunctional supported on carbon nanotubes(CNTs) for Fischer–Tropsch synthesis(FTS) in a fixedbed reactor. These Co-Ru/CNTs catalysts were synthesized with various weight proportions of Ru/Co(0.1 to 0.4 wt%) with keeping a fixed amount of cobalt(10 wt%). Moreover, for comparison purpose, CNTs supported Co-and Co(Ru)-based catalysts at same loading as the above catalysts were prepared through impregnation method. We characterize the present catalysts through the various techniques such as Energy–dispersive X-ray(EDX), Transmission Electron Microscopy(TEM), Brunauer–Emmett–Teller(BET),Hydrogen-Temperature-Programmed Reduction(H_2-TPR), Hydrogen-Temperature-Programmed Desorption(H_2-TPD) and O_2 titration. Thus using the chemical reduction method, a narrow particle size distribution was obtained so that the small cobalt particles were confined inside the CNTs. The Co-based catalyst prepared by impregnation was compared with the Co-Ru catalysts at the same loading. The results demonstrated that the use of chemical reduction method led to decrease the average Co oxide cluster size to8.7 nm so that the reduction enhanced about 24% and stabilized an earlier time at the stream. Among the prepared catalysts, the results indicated that the Co-Ru/CNTs catalysts demonstrated high catalytic activity with the highest long-chain hydrocarbons(C_(5+)), selectivity up to 74.76%, which was higher than those we obtained by the Co-Ru/γ-Al_2O_3(61._20%), Co/CNTs(43.68%) and Co/γ-Al_2O_3(37.69%). At the same time, comparing with those catalyst synthesized by impregnation, the use of chemical reduction led to enhancement of the C_(5+) selectivity from 59.30% to 68.83% and increment in FTS rate about 11% for the Co-Ru/CNTs catalyst.展开更多
A new hierarchical composite consisted of multi-walled carbon nanotubes （CNTs） layer anchored on macroscopic a-A1203 host matrix was synthesized and used as support for Fischer-Tropsch synthesis （FTS）. The composi...A new hierarchical composite consisted of multi-walled carbon nanotubes （CNTs） layer anchored on macroscopic a-A1203 host matrix was synthesized and used as support for Fischer-Tropsch synthesis （FTS）. The composite constituted by a thin shell of a homogeneous, highly entan-gled and structure-opened carbon nanotubes network and it exhibited a relatively high and fully accessible specific surface area of 76 m2.g-1, compared with that of 5 m2.g-1 of the original a-A1203support. The metal-support interaction between carbon nanotubes surface and cobalt precursor and high effective surface area led to a relatively high dispersion of cobalt nanoparticles. This hierarchically supported cobalt catalyst exhibited a high FTS activity along with an extremely high selectivity towards liquid hydrocarbons compared with the cobalt-based catalyst supported on pristine a-A1203 or on CNTs carriers. This improvement can attribute to the high accessibility of composite surface area com- paring with the macroscopic host structure alone or to the bulk CNTs where the nanoscopic dimension induced a dense packing with low mass transfer which favoured the problem of reactants competitive diffusion towards the cobalt active site. In addition, intrinsic thermal conductivity of decorated CNTs could help the heat dissipating throughout the catalyst body, thus avoiding the formation of local hot spots which appeared in high CO conversion under pure syngas feed in FTS reaction. Cobalt supported on CNTs decorated a-A1203 catalyst also exhibited satisfied high stability during more than 200 h on stream under relatively severe conditions compared with other catalysts reported in the literature. Finally, the macroscopic shape of such composite easily rendered its usage as catalyst support in a fixed-bed configuration without facing problems of transport and pressure drop as encountered with the bulk CNTs.展开更多
Co-based catalysts were prepared by using dielectric-barrier discharge （DBD） plasma as an alternative method to conventional thermal calcination. The characterization results of N2-physisorption, temperature program...Co-based catalysts were prepared by using dielectric-barrier discharge （DBD） plasma as an alternative method to conventional thermal calcination. The characterization results of N2-physisorption, temperature programmed reduction （TPR）, transmission electron microscope （TEM）, and X-ray diffraction （XRD） indicated that the catalysts prepared by DBD plasma had a higher specific surface area, lower reduction temperature, smaller particle size and higher cobalt dispersion as compared to calcined catalysts. The DBD plasma method can prevent the sintering and aggregation of active particles on the support due to the decreased treatment time （0.5 h） at lower temperature compared to the longer thermal calcination at higher temperature （at 500~C for 5 h）. As a result, the catalytic performance of the Fischer-Tropsch synthesis on DBD plasma treated Co/Si02 catalyst showed an enhanced activity, C5＋ selectivity and catalytic stability as compared to the conventional thermal calcined Co/SiO2 catalyst.展开更多
Carbon nanotube （CNT）-supported Ru nanoparticles with mean sizes ranging from 2.3 to 9.2 nm were prepared by different post-treatments and studied for Fischer-Tropsch （FT） synthesis. The effects of Ru particle siz...Carbon nanotube （CNT）-supported Ru nanoparticles with mean sizes ranging from 2.3 to 9.2 nm were prepared by different post-treatments and studied for Fischer-Tropsch （FT） synthesis. The effects of Ru particle size on catalytic behaviors were investigated at both shorter and longer contact times. At shorter contact time, where the secondary reactions were insignificant, the turnover frequency （TOF） for CO conversion was dependent on the mean size of Ru particles; TOF increased with the mean size of Ru particles from 2.3 to 6.3 nm and then decreased slightly. At the same time, the selectivities to C5＋ hydrocarbons increased gradually with the mean size of Ru particles up to 6.3 nm and then kept almost unchanged with a further increase in Ru particle size. At longer contact time, C10-C20 selectivity increased significantly at the expense of C21＋ selectivity, suggesting the occurrence of the selective hydrocracking of C21＋ to C10-C20 hydrocarbons.展开更多
The production of high quality single-walled carbon nanotubes(SWCNTs)on a bulk scale has been an issue of considerable interest.Recently,it has been demonstrated that high quality SWCNTs can be continuously synthesize...The production of high quality single-walled carbon nanotubes(SWCNTs)on a bulk scale has been an issue of considerable interest.Recently,it has been demonstrated that high quality SWCNTs can be continuously synthesized on large scale by using induction thermal plasma technology.In this process,the high energy density of the thermal plasma is employed to generate dense vapor-phase precursors for the synthesis of SWCNTs.With the current reactor system,a carbon soot product which contains approximately 40 wt%of SWCNTs can be continuously synthesized at the high production rate of~100 g/h.In this article,our recent research efforts to achieve major advances in this technology are presented.Firstly,the processing parameters involved are examined systematically in order to evaluate their individual inuences on the SWCNT synthesis.Based on these results,the appropriate operating conditions of the induction thermal plasma process for an effective synthesis of SWCNTs are discussed.A characterization study has also been performed on the SWCNTs produced under the optimum processing conditions.Finally,a mathematical model of the process currently under development is described.The model will help us to better understand the synthesis of SWCNTs in the induction plasma process.展开更多
Copper-decorated carbon nanotubes(CNTs) have important applications as precursors for ultraconductive copper wires. Tenorite-decorated CNTs(CuO-CNTs) are ideal candidates and are currently developed using laborious pr...Copper-decorated carbon nanotubes(CNTs) have important applications as precursors for ultraconductive copper wires. Tenorite-decorated CNTs(CuO-CNTs) are ideal candidates and are currently developed using laborious processes. For this reason, we have developed a facile and scalable method for the synthesis of CuO-CNTs from copper acetate. It was found that the optimal loading of copper acetate onto the CNTs was 23.1 wt% and that three 1-minute microwave treatments were sufficient for the decomposition of copper acetate to copper oxide. The loading of copper oxide onto the nanotubes was confirmed using X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy and thermogravimetric analysis. The materials were characterised using X-ray diffraction and scanning electron microscopy.展开更多
In spite of the current prevalence of the CVD-based processes, the electric arc remains an interesting process for the synthesis of carbon nanoforms, thanks to its versatility, robustness and easiness. It also allows ...In spite of the current prevalence of the CVD-based processes, the electric arc remains an interesting process for the synthesis of carbon nanoforms, thanks to its versatility, robustness and easiness. It also allows performing in-situ substitution of carbon atoms by hetero-elements in the graphene lattice. Our work aims to establish a correlation between the plasma properties, type and chemical composition （and the substitution rate） of the obtained single-wall carbon nan- otubes. The plasma was characterized by optical emission spectroscopy and the products were analyzed by high resolution transmission electron microscopy and core level Electron Energy-Loss Spectroscopy （EELS）. Results show that a high boron content leads to a plasma temperature decrease and hinders the formation of nanotubes. This effect can be compensated by increasing the arc current and/or yttrium content. The optimal conditions for the synthesis of boron- and/or nitrogen-substituted nanotubes correspond to a high axial plasma temperature associated to a strong radial gradient. EELS analysis confirmed that the boron incorporates into the graphenic lattice.展开更多
A pulse plasma chemical vapor deposition (CVD) technique was developed for improving the growth yield of single-walled carbon nanotubes (SWNTs) with a narrow chirality distribution. The growth yield of the SWNTs could...A pulse plasma chemical vapor deposition (CVD) technique was developed for improving the growth yield of single-walled carbon nanotubes (SWNTs) with a narrow chirality distribution. The growth yield of the SWNTs could be improved by repetitive short duration pulse plasma CVD, while maintaining the initial narrow chirality distribution. Detailed growth dynamics is discussed based on a systematic investigation by changing the pulse parameters. The growth of SWNTs with a narrow chirality distribution could be controlled by the difference in the nucleation time required using catalysts comprising relatively small or large particles as the key factor. The nucleation can be controlled by adjusting the pulse on/ofF time ratio and the total processing time.展开更多
A new technique for the synthesis of carbon nanotubes from coal is introduced in this paper. In this process, coal is selected as the raw material to injected into plasma jet directly, nanotubes are formed on the reac...A new technique for the synthesis of carbon nanotubes from coal is introduced in this paper. In this process, coal is selected as the raw material to injected into plasma jet directly, nanotubes are formed on the reactor wall. The metal elements contained in parent coal such as Cu, Al act as the catalyst. This technique is different from the traditional arc discharge process and has the advantages of easy and steady operation and low cost of raw material, so it is an attractive process.展开更多
Nanothermites (metal oxide/metal) can offer tremendously exothermic self sustained reactions. CuO is one of the most effective oxidizers for naonothermite applications. This study reports on two prospectives for the m...Nanothermites (metal oxide/metal) can offer tremendously exothermic self sustained reactions. CuO is one of the most effective oxidizers for naonothermite applications. This study reports on two prospectives for the manufacture of CuO nanoparticles. Colloidal CuO particles of 15 nm particle size were developed using hydrothermal synthesis technique. Multiwalled carbon nanotubes (MWCNTs) with surface are 700m2/g was employed as a substrate for synthesis of CuO-coated MWCNTs using electroless plating. On the other hand, aluminium particles with combustion heat of 32000 J/g is of interest as high energy density material. The impact of stoichiometric nanothermite particles (CuO/Al & Cuo-coated MWCNTs/Al) on shock wave strength of Al/TNT nanocomposite was evaluated using ballistic mortar test. While CuO-coated MWCNTs decreased the shock wave strength by 15%;colloidal CuO enhanced the shock wave strength by 30%. The superior performance of colloidal CuO particles was correlated to their steric stabilization with employed organic solvent. This is the first time ever to report on fabrication, isolation, and integration of stablilized colloidal nanothermite particles into energetic matrix where intimate mixing between oxidizer and metal fuel could be achieved.展开更多
基金supported by National Natural Science Foundation of China(Nos.11305218,11575253)the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2015262)+1 种基金the CASHIPS Director’s Fund(No.YZJJ201505)Anhui Provincial Natural Science Foundation for Distinguished Young Scholars of China(No.1608085J03)
文摘It is reported that the highly dispersed Pt nanoparticles on carbon nanotubes can be synthesized under mild conditions by in situ plasma treatment.The carbon nanotube was pretreated by O_2 plasma to transform into oxide carbon nanotubes（O-CNTs）,and then it was mixed with the precursors（the mixture of H_2 PtCl_6and PdCl_6）.After that,the O-CNTs and the precursors were simultaneously treated by H_2 plasma.The precursors were transformed into Pt-Pd nanoparticles（NPs）and the O-CNTs transformed into CNT.The synthesized CNT-based Pt-Pd nanoparticles were characterized by scanning electron microscopy,transmission electron microscopy,X-ray diffraction and X-ray photoelectron spectroscopy.All the analysis showed that the Pt-Pd nanoparticles were deposited on CNT as a form of face-centered cubical structure.
基金Supported by the National Natural Science Foundation of China (No.21506154)the program for New Century Excellent Talents in University of Ministry of Education of China (NCET-06-0239)
文摘Hydrogen dielectric-barrier discharge (H<sub>2</sub>-DBD) plasma was successfully used to prepare carbon nanotubes (CNTs)-supported cobalt (Co) catalyst. The H<sub>2</sub>-DBD plasma treatment simultaneously decomposed and reduced the cobalt precursor at a lower temperature and in a shorter time than the conventional method (calcination and hydrogen reduction). It is considered that the H<sub>2</sub>-DBD plasma method can remarkably decrease the amount of energy input compared to traditional methods used to prepare the Co-based catalyst in Fischer-Tropsch synthesis (FTS). Results showed that the Co catalyst prepared by H<sub>2</sub>-DBD plasma had an equivalent catalytic performance for FTS as that prepared using the conventional method in calcination and hydrogen reduction, thereby determining that H<sub>2</sub>-DBD plasma was an effective alternative treatment for preparing the Co/CNTs catalyst for FTS. This technology will provide a new strategy for preparing catalysts in other catalysis processes.
文摘We used a chemical reduction method to synthesize the catalysts of cobalt(Co) and cobalt-ruthenium(Co-Ru) bifunctional supported on carbon nanotubes(CNTs) for Fischer–Tropsch synthesis(FTS) in a fixedbed reactor. These Co-Ru/CNTs catalysts were synthesized with various weight proportions of Ru/Co(0.1 to 0.4 wt%) with keeping a fixed amount of cobalt(10 wt%). Moreover, for comparison purpose, CNTs supported Co-and Co(Ru)-based catalysts at same loading as the above catalysts were prepared through impregnation method. We characterize the present catalysts through the various techniques such as Energy–dispersive X-ray(EDX), Transmission Electron Microscopy(TEM), Brunauer–Emmett–Teller(BET),Hydrogen-Temperature-Programmed Reduction(H_2-TPR), Hydrogen-Temperature-Programmed Desorption(H_2-TPD) and O_2 titration. Thus using the chemical reduction method, a narrow particle size distribution was obtained so that the small cobalt particles were confined inside the CNTs. The Co-based catalyst prepared by impregnation was compared with the Co-Ru catalysts at the same loading. The results demonstrated that the use of chemical reduction method led to decrease the average Co oxide cluster size to8.7 nm so that the reduction enhanced about 24% and stabilized an earlier time at the stream. Among the prepared catalysts, the results indicated that the Co-Ru/CNTs catalysts demonstrated high catalytic activity with the highest long-chain hydrocarbons(C_(5+)), selectivity up to 74.76%, which was higher than those we obtained by the Co-Ru/γ-Al_2O_3(61._20%), Co/CNTs(43.68%) and Co/γ-Al_2O_3(37.69%). At the same time, comparing with those catalyst synthesized by impregnation, the use of chemical reduction led to enhancement of the C_(5+) selectivity from 59.30% to 68.83% and increment in FTS rate about 11% for the Co-Ru/CNTs catalyst.
基金the China Scholarship Council (CSC) for the PhD grant during his stay at the LMSPC
文摘A new hierarchical composite consisted of multi-walled carbon nanotubes （CNTs） layer anchored on macroscopic a-A1203 host matrix was synthesized and used as support for Fischer-Tropsch synthesis （FTS）. The composite constituted by a thin shell of a homogeneous, highly entan-gled and structure-opened carbon nanotubes network and it exhibited a relatively high and fully accessible specific surface area of 76 m2.g-1, compared with that of 5 m2.g-1 of the original a-A1203support. The metal-support interaction between carbon nanotubes surface and cobalt precursor and high effective surface area led to a relatively high dispersion of cobalt nanoparticles. This hierarchically supported cobalt catalyst exhibited a high FTS activity along with an extremely high selectivity towards liquid hydrocarbons compared with the cobalt-based catalyst supported on pristine a-A1203 or on CNTs carriers. This improvement can attribute to the high accessibility of composite surface area com- paring with the macroscopic host structure alone or to the bulk CNTs where the nanoscopic dimension induced a dense packing with low mass transfer which favoured the problem of reactants competitive diffusion towards the cobalt active site. In addition, intrinsic thermal conductivity of decorated CNTs could help the heat dissipating throughout the catalyst body, thus avoiding the formation of local hot spots which appeared in high CO conversion under pure syngas feed in FTS reaction. Cobalt supported on CNTs decorated a-A1203 catalyst also exhibited satisfied high stability during more than 200 h on stream under relatively severe conditions compared with other catalysts reported in the literature. Finally, the macroscopic shape of such composite easily rendered its usage as catalyst support in a fixed-bed configuration without facing problems of transport and pressure drop as encountered with the bulk CNTs.
基金supported by National Natural Science Foundation of China (No.21076151)
文摘Co-based catalysts were prepared by using dielectric-barrier discharge （DBD） plasma as an alternative method to conventional thermal calcination. The characterization results of N2-physisorption, temperature programmed reduction （TPR）, transmission electron microscope （TEM）, and X-ray diffraction （XRD） indicated that the catalysts prepared by DBD plasma had a higher specific surface area, lower reduction temperature, smaller particle size and higher cobalt dispersion as compared to calcined catalysts. The DBD plasma method can prevent the sintering and aggregation of active particles on the support due to the decreased treatment time （0.5 h） at lower temperature compared to the longer thermal calcination at higher temperature （at 500~C for 5 h）. As a result, the catalytic performance of the Fischer-Tropsch synthesis on DBD plasma treated Co/Si02 catalyst showed an enhanced activity, C5＋ selectivity and catalytic stability as compared to the conventional thermal calcined Co/SiO2 catalyst.
基金supported by the National Basic Research Program of China (No. 2013CB933100)the National Natural Science Foundation of China (21173174, 21161130522, 21033006 and 20923004)+1 种基金the Program for Changjiang Scholars and Innovative Research Team in University (No. IRT1036)the Research Fund for the Doctoral Program of Higher Education (No. 20090121110007)
文摘Carbon nanotube （CNT）-supported Ru nanoparticles with mean sizes ranging from 2.3 to 9.2 nm were prepared by different post-treatments and studied for Fischer-Tropsch （FT） synthesis. The effects of Ru particle size on catalytic behaviors were investigated at both shorter and longer contact times. At shorter contact time, where the secondary reactions were insignificant, the turnover frequency （TOF） for CO conversion was dependent on the mean size of Ru particles; TOF increased with the mean size of Ru particles from 2.3 to 6.3 nm and then decreased slightly. At the same time, the selectivities to C5＋ hydrocarbons increased gradually with the mean size of Ru particles up to 6.3 nm and then kept almost unchanged with a further increase in Ru particle size. At longer contact time, C10-C20 selectivity increased significantly at the expense of C21＋ selectivity, suggesting the occurrence of the selective hydrocracking of C21＋ to C10-C20 hydrocarbons.
基金This work was supported by the Natural Science and Engineering Research Council(NSERC)of Canada.
文摘The production of high quality single-walled carbon nanotubes(SWCNTs)on a bulk scale has been an issue of considerable interest.Recently,it has been demonstrated that high quality SWCNTs can be continuously synthesized on large scale by using induction thermal plasma technology.In this process,the high energy density of the thermal plasma is employed to generate dense vapor-phase precursors for the synthesis of SWCNTs.With the current reactor system,a carbon soot product which contains approximately 40 wt%of SWCNTs can be continuously synthesized at the high production rate of~100 g/h.In this article,our recent research efforts to achieve major advances in this technology are presented.Firstly,the processing parameters involved are examined systematically in order to evaluate their individual inuences on the SWCNT synthesis.Based on these results,the appropriate operating conditions of the induction thermal plasma process for an effective synthesis of SWCNTs are discussed.A characterization study has also been performed on the SWCNTs produced under the optimum processing conditions.Finally,a mathematical model of the process currently under development is described.The model will help us to better understand the synthesis of SWCNTs in the induction plasma process.
基金the financial support provided by the Welsh Government Sêr Cymru National Research Network in Advanced Engineering and Materials (NRN-150)the Sêr Cymru Chair Programme (A.R.B.)+8 种基金the Sêr Cymru II Fellowship (C.E.G.)the Sêr Cymru II Recapturing Talent Fellowship (E.K.)partly funded by the European Regional Development Fund (ERDF)part of the Flexible Integrated Energy Systems (FLEXIS) and Reducing Industrial Carbon Emissions (RICE) research operations funded by the Welsh European Funding Office (WEFO)provided by the Engineering and Physical Sciences Research Council (EPSRC) UK, the Robert A. Welch Foundation (C-0002)King Saud Universitythe assistance provided by the Swansea University AIM Facility, which was funded in part by the EPSRC (EP/M028267/1)the European Regional Development Fund through the Welsh Government (80708)the Sêr Solar project via the Welsh Government
文摘Copper-decorated carbon nanotubes(CNTs) have important applications as precursors for ultraconductive copper wires. Tenorite-decorated CNTs(CuO-CNTs) are ideal candidates and are currently developed using laborious processes. For this reason, we have developed a facile and scalable method for the synthesis of CuO-CNTs from copper acetate. It was found that the optimal loading of copper acetate onto the CNTs was 23.1 wt% and that three 1-minute microwave treatments were sufficient for the decomposition of copper acetate to copper oxide. The loading of copper oxide onto the nanotubes was confirmed using X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy and thermogravimetric analysis. The materials were characterised using X-ray diffraction and scanning electron microscopy.
文摘In spite of the current prevalence of the CVD-based processes, the electric arc remains an interesting process for the synthesis of carbon nanoforms, thanks to its versatility, robustness and easiness. It also allows performing in-situ substitution of carbon atoms by hetero-elements in the graphene lattice. Our work aims to establish a correlation between the plasma properties, type and chemical composition （and the substitution rate） of the obtained single-wall carbon nan- otubes. The plasma was characterized by optical emission spectroscopy and the products were analyzed by high resolution transmission electron microscopy and core level Electron Energy-Loss Spectroscopy （EELS）. Results show that a high boron content leads to a plasma temperature decrease and hinders the formation of nanotubes. This effect can be compensated by increasing the arc current and/or yttrium content. The optimal conditions for the synthesis of boron- and/or nitrogen-substituted nanotubes correspond to a high axial plasma temperature associated to a strong radial gradient. EELS analysis confirmed that the boron incorporates into the graphenic lattice.
文摘A pulse plasma chemical vapor deposition (CVD) technique was developed for improving the growth yield of single-walled carbon nanotubes (SWNTs) with a narrow chirality distribution. The growth yield of the SWNTs could be improved by repetitive short duration pulse plasma CVD, while maintaining the initial narrow chirality distribution. Detailed growth dynamics is discussed based on a systematic investigation by changing the pulse parameters. The growth of SWNTs with a narrow chirality distribution could be controlled by the difference in the nucleation time required using catalysts comprising relatively small or large particles as the key factor. The nucleation can be controlled by adjusting the pulse on/ofF time ratio and the total processing time.
文摘A new technique for the synthesis of carbon nanotubes from coal is introduced in this paper. In this process, coal is selected as the raw material to injected into plasma jet directly, nanotubes are formed on the reactor wall. The metal elements contained in parent coal such as Cu, Al act as the catalyst. This technique is different from the traditional arc discharge process and has the advantages of easy and steady operation and low cost of raw material, so it is an attractive process.
基金supported by the National Natural Science Foundation of China(21321002 and 21303191)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA09030100)~~
文摘Nanothermites (metal oxide/metal) can offer tremendously exothermic self sustained reactions. CuO is one of the most effective oxidizers for naonothermite applications. This study reports on two prospectives for the manufacture of CuO nanoparticles. Colloidal CuO particles of 15 nm particle size were developed using hydrothermal synthesis technique. Multiwalled carbon nanotubes (MWCNTs) with surface are 700m2/g was employed as a substrate for synthesis of CuO-coated MWCNTs using electroless plating. On the other hand, aluminium particles with combustion heat of 32000 J/g is of interest as high energy density material. The impact of stoichiometric nanothermite particles (CuO/Al & Cuo-coated MWCNTs/Al) on shock wave strength of Al/TNT nanocomposite was evaluated using ballistic mortar test. While CuO-coated MWCNTs decreased the shock wave strength by 15%;colloidal CuO enhanced the shock wave strength by 30%. The superior performance of colloidal CuO particles was correlated to their steric stabilization with employed organic solvent. This is the first time ever to report on fabrication, isolation, and integration of stablilized colloidal nanothermite particles into energetic matrix where intimate mixing between oxidizer and metal fuel could be achieved.
