Effect of different process conditions on the physicochemical and antimicrobial properties of plasma-activated water

The physicochemical properties of plasma-activated water(PAW)generated under different process conditions were investigated,and their changes under different storage conditions were also studied.The results showed that increasing the processing time and power,and decreasing generated water volume,could cause an increase in the redox potential,conductivity,and temperature of PAW,and a decrease in its pH.A slower dissipation of the reactive oxygen and nitrogen species in PAW was found on storage at 4℃in a sealed conical flask than on storage at room temperature.The inactivation ability of plasma-activated lactic acid(LA)to Listeria monocytogenes(L.monocytogenes)and Pseudomonas aeruginosa(P.aeruginosa)was higher than that of PAW or LA alone under the same experimental conditions.The results of this study may provide theoretical information for the application of PAW as a potential antimicrobial agent in the future.

Catalytic Effect of Activated Carbon and Activated Carbon Fiber in Non-Equilibrium Plasma-Based Water Treatment

Catalysis and regeneration efficiency of granular activated carbon （GAC） and activated carbon fiber （ACF） were investigated in a non-equilibrium plasma water treatment reactor with a combination of pulsed streamer discharge and GAC or ACF. The experimental results show that the degradation efficiency of methyl orange （MO） by the combined treatment can increase 22% （for GAC） and 24% （for ACF） respectively compared to pulsed discharge treatment alone, indicating that the combined treatment has a synergetic effect. The MO degradation efficiency by the combined treatment with pulsed discharge and saturated GAC or ACF can increase 12% and 17% respectively compared to pulsed discharge treatment alone. Both GAC and ACF show catalysis and the catalysis of ACF is prominent. Meanwhile, the regeneration of GAC and ACF are realized in this process. When H202 is introduced into the system, the utilization efficiency of ozone and ultraviolet light is improved and the regeneration efficiency of GAC and ACF is also increased.

Rice plant growth and yield: foliar application of plasma activated water

Plasma activated water(PAW)was prepared for 10 min to be applied one tofive times as a foliar spray to rice plants,to investigate plant growth,yield and the concentrations of total soluble protein and sugar in the rice grains produced.The results reveal that(1)the plant height,stem diameter,dry weight,chlorophyll and total carotene concentrations were improved by∼15%,∼25%,∼24%,∼47%and∼45%,respectively,with respect to control,(2)defense mechanisms of the plants treated with PAW were improved,(3)concentrations of total soluble protein and sugar were enhanced in the rice grains of PAW treated plants and(4)yield was increased by∼14%.

Removal of NO and SO2 in Corona Discharge Plasma Reactor with Water Film

In this paper, a novel type of a corona discharge plasma reactor was designed, which consists of needle-plate-combined electrodes, in which a series of needle electrodes are placed in a glass container filled with flue gas, and a plate electrode is immersed in the water. Based on this model, the removal of NO and SO2 was tested experimentally. In addition, the effect of streamer polarity on the reduction of SO2 and NO was investigated in detail. The experimental results show that the corona wind formed between the high-voltage needle electrode and the water by corona discharge enhances the cleaning efficiency of the flue gas because of the presence of water, and the cleaning efficiency will increase with the increase of applied dc voltage within a definite range. The removal efficiency of SO2 up to 98%, and about 85% of NOx removal under suitable conditions is obtained in our experiments.

Systemic study on the safety of immuno-deficient nude mice treated by atmospheric plasma-activated water

Cold atmospheric-pressure plasma is a new technology, widely used in many fields of biomedicine,especially in cancer treatment. Cold plasma can selectively kill a variety of tumor cells, and its biological safety in clinical trials is also very important. In many cases, the patient’s immune level is relatively low, so we first studied the safety assessment of plasma treatment in an immunocompromised animal model. In this study, we examined the safety of immuno-deficient nude mice by oral lavage treatment of plasma-activated water, and studied the growth status, main organs and blood biochemical indexes. Acute toxicity test results showed that the maximum dose of plasma treatment for 15 min had no lethal effect and other acute toxicity. There were no significant changes in body weight and survival status of mice after 2 min and 4 min of plasma-activated water(PAW)treatment for 2 weeks. After treatment, the major organs, including heart, liver, spleen, lung and kidney, were not significantly changed in organ coefficient and tissue structure. Blood biochemical markers showed that blood neutrophils and mononuclear cells were slightly increased, and the others remained unchanged. Liver function, renal function, electrolytes, glucose metabolism and lipid metabolism were not affected by different doses of PAW treatment. The above results indicate that PAW treatment can be used to treat immuno-deficient nude mice without significant safety problems.

The Aging Study on Polyethylene Terephthalate with Surface Modification by Water Vapor Plasma

The aging effects of the contact angle and surface energy on polyethylene terephthalate (PET) have been investigated with surface modification by water vapor plasma. The experimental results show that the contact angle of water and PET decreases obviously and surface energy increases. However, with the increase of the aging time, the contact angle and surface energy change back gradually to original state.

Discharge Characteristics of DC Arc Water Plasma for Environmental Applications

A water plasma was generated by DC arc discharge with a hafnium embedded rodtype cathode and a nozzle-type anode. The discharge characteristics were examined by changing the operation parameter of the arc current. The dynamic behavior of the arc discharge led to significant fluctuations in the arc voltage and its frequency. Analyses of the high speed image and the arc voltage waveform showed that the arc discharge was in the restrike mode and its frequency varied within several tens of kilohertz according to the operating conditions. The larger thermal plasma volume was generated by the higher flow from the forming steam with a higher restrike frequency in the higher arc current conditions. In addition, the characteristics of the water plasma jet were investigated by means of optical emission spectroscopy to identify the abundant radicals required in an efficient waste treatment process.

Esterification by the Plasma Acidic Water:Novel Application of Plasma Acid

This work explores the possibility of plasma acid as acid catalyst in organic reactions. Plasma acidic water was prepared by dielectric barrier discharge and used to catalyze esterification of n-heptanioc acid with ethanol. It is found that the plasma acidic water has a stable and better performance than sulfuric acid, meaning that it is an excellent acid catalyst. The plasma acidic water would be a promising alternative for classic mineral acid as a more environment friendly acid.

Decomposition of Glycerine by Water Plasmas at Atmospheric Pressure

High concentration of aqueous glycerine was decomposed using a direct current （DC） plasma torch at atmospheric pressure. The torch can generate the plasma with water as the plasma-supporting gas in the absence of any additionM gas supply system and cooling devices. The results indicated that 5 mol% glycerine was completely decomposed by water plasmas at arc powers of 0.55~1.05 kW. The major products in the effluent gas were H2 （68.9%~71.1%）, CO2 （18.9%~23.0%）, and CO （0.2%~0.6%）. However, trace levels of formic acid （HCOOH） and formaldehyde （HCHO） were observed in the liquid effluent. The results indicated that the water plasma waste treatment process is capable of being an alternative green technology for organic waste decomposition.

A simple derivative spectrophotometric method for simultaneously detecting nitrate and nitrite in plasma treated water

A spectrophotometric technique is developed to simultaneously quantify nitrate and nitrite in plasma treated water.The measurement is based on examining the inflection points(wavelengths)in the derivative absorbance of the nitrate or nitrite solution.At the inflection points of the pure nitrate solution,the derivative absorbance is zero and independent of the nitrate’s concentration,and thus the nitrite’s concentration in a mixed nitrate and nitrite solution can be obtained by using the Beer’s law at these points.The nitrate’s concentration can also be achieved from the inflection points of nitrite in the same manner.The relation between the tested substance’s(nitrate or nitrite)concentration and the second-or the third-order absorbances is obtained at these inflection points.Test measurements for mixed aqueous solutions of nitrate and nitrite with or without hydrogen peroxide confirm the reliability of this technique.We applied this technique to quantify the nitrate and nitrite generated in air plasma treated aqueous solutions.The results indicate that both nitrate and nitrite concentrations increase with the plasma treatment time,and the nitrite species is found to be generated prior to the nitrate species in the air plasma treated aqueous solution.Moreover,the production rate of total nitrogen species is independent of the solutions’p H value.These results are relevant to diverse applications of plasma activated solutions in materials processing,biotechnology,medicine and other fields.

Molecular mechanism study of Astragalus adsurgens Pall synergistically induced by plasma and plasma-activated water

The mutagenic effects of discharge plasma and plasma+PAW(plasma and its activated water combined) on Astragalus adsurgens Pall seeds were explored. Needle array-plate dielectric-barrier discharge plasma was used to treat A. adsurgens Pall seeds and PAW was prepared at the same time.The deionized water and the obtained PAW were used to cultivate plasma-treated seeds in groups and the survival rate of each group was counted. Results showed that the survival rate of the treated seeds of A. adsurgens Pall when cultured with deionized water was not significantly different from that of the control check(CK). The culture with PAW had an obvious lethal effect and each group reached the half-lethal dose. Reactive oxygen species(ROS) and RNA-Seq analysis of seedlings in the 3 h treatment group showed that the content of ROS in the 3 d post-treatment group was significantly higher than that of the CK. Because expression of the gene with the function of scavenging superoxide free radicals was upregulated, the ROS content of seedlings on the sixth day was significantly lower than that on the third day. Plasma and plasma+PAW treatments changed a large number of gene expressions;particularly, the plasma+PAW group caused plant-growth genes to be significantly upregulated. After treatment, the seedlings of A. adsurgens Pall may grow faster and have higher nutritional value. This research is of great significance to the wider application of isoelectronic bodies and their activated water physicochemical mutagens in biological effects and breeding research.

Plasma activated water prepared by different plasma sources:physicochemical properties and decontamination effect on lentils sprouts

The pulsed corona discharge(CD)generated in contact with water and directly in water,and high-power air plasma jet(APJ)were studied for production of plasma activated water(PAW).The changes of physical(pH,redox potential,conductivity,temperature)and chemical(peroxides,nitrites,nitrates concentrations)properties of treated water were investigated.The comparison of CD generated in gas/water interface and underwater configuration in the same system showed that the interaction of reactive oxygen and nitrogen species formed in ambient air in gas/water system induces different chemical processes,leading to lower pH,higher oxidation-reduction potential(ORP)and higher conductivity of PAW than in underwater discharge.High yield of peroxide was observed in both configurations.The PAW prepared by APJ exhibits high concentration of nitrites and nitrates according to supplied energy,and related significant decrease of pH and increase of ORP and conductivity after treatment.The antimicrobial effect of PAW prepared by CD and plasma jet on lentils sprouts was studied in different treatment and washing times.The APJ appears to have great efficacy on water activation resulted in strong decontamination effect.The PAW treated by APJ for 10 min led to bacterial reduction from initial 8.3 to 5.9 and 4.0 log10 CFU g^(-1)after 10 and 30 min of washing,respectively.

Influence of water content on the inactivation of P. digitatum spores using an air–water plasma jet

In order to investigate whether an air–water plasma jet is beneficial to improve the efficiency of inactivation, a series of experiments were done using a ring-needle plasma jet. The water content in the working gas（air） was accurately measured based on the Karl Fischer method. The effects of water on the production of OH（A;Σ;–X;Π;） and O（3p;P–3s;S） were also studied by optical emission spectroscopy. The results show that the water content is in the range of 2.53–9.58 mg l;, depending on the gas/water mixture ratio. The production of OH（A;Σ;–X;Π;） rises with the increase of water content, whereas the O（3p;P–3s;S） shows a declining tendency with higher water content. The sterilization experiments indicate that this air–water plasma jet inactivates the P. digitatum spores very effectively and its efficiency rises with the increase of the water content. It is possible that OH（A;Σ;–X;Π;） is a more effective species in inactivation than O（3p;P–3s;S） and the water content benefit the spore germination inhibition through rising the OH（A;Σ;–X;Π;） production. The maximum of the inactivation efficacy is up to 93% when the applied voltage is -6.75 kV and the water content is 9.58 mg l;.

Cutting properties of water vapor plasma arc on 7A52 aluminum alloy plate

7A52 aluminum alloy was cut with an integrated equipment for welding and cutting using water vapor plasma arc. Various cutting mediums were tested. The arc force, electron density and cutting speed in each medium were tested and calculated. The fractography and microstructure of the cuts were also analyzed. Results show that the arc force, electron density and cutting speed #wreased with increasing acetone concentration. However, above a certain value （40%）, higher acetone concentrations contribute little to the arc force and cutting speed. The microstrueture of material near the cut was greatly influenced by the water vapor plasma arc. While the microstructure of the material beyond 10 mm from the cut was hardly influenced by the cutting heat. It was demonstrated that the water vapor plasma arc can be used for cutting of aluminum alloys in open field or emergency situations.

Fast inactivation of microbes and degradation of organic compounds dissolved in water by thermal plasma

The multifunctionality and the advantages of thermal plasma for the fast inactivation of viable cells and degradation of organic compounds dissolved in waste water are presented.A complete bacterial inactivation process was observed and studied using a thermal plasma treatment source with very short application times,in particular for Staphylococcus aureus bundle spore survival.The survival curves and analyses of the experimental data of the initial and final densities of S.aureus bacteria show a dramatic inhibitory effect of the plasma discharge on the residual bacteria survival ratio.As the exposure time increased,the inactivation process rate increased for direct exposure more than it did for indirect exposure.The evaluation of direct and indirect exposure was based on the analysis of the ultraviolet spectrum from the absorbance spectra of the organic compound dye called benzene sulfonate（C（16）H（11）N2Na O4S）and of viable cells called S.aureus.Organic compounds were degraded and viable cells were killed in a short time by thermal plasma.Moreover,analyses of total carbon,total organic carbon,and total inorganic carbon showed a fast decrease in organically bound carbon,however,this was not as fast as the absorbance spectra revealed by the exposure time increasing more for direct exposure than indirect exposure.After 100 s of exposure to the organic compound dye the removal had a maximun of 40%for samples with indirect exposure to the plasma and a maximum of 90%for samples with the direct exposure.For both samples,where some organic contaminants still remained in treated water,four electrolytes（KCl,Na Cl,Na2SO4,and CH3COONa）were added to be effective for complete sterilization,reaching a purity of 100%.A proposal is made for an optimized thermal plasma water purification system（TPWPS）to improve fast inactivation of microbes and the degradation of organic compounds dissolved in water（especially for direct exposure rather than indirect exposure）using a hybrid plasma torch with an electrical power of 125 kW（500 V–250 A）producing a high-temperature（10 000 K–19 000 K）plasma jet with a maximum gas consumption of 28 mg s^-1.

Study on the Generation Characteristics of Dielectric Barrier Discharge Plasmas on Water Surface

A new contact glow discharge electrode employed in this study. Because of the strong field the electrode and the water surface, glow discharge on the surface of water was designed and strength in the small air gap formed by plasmas were generated and used to treat waste water. The electric field distribution of the designed electrode model was simulated by MAXWELL 3D~ simulation software, and the discharge parameters were measured. Through a series of experiments, we investigated the impact of optimal designs, such as the dielectric of the electrode, immersion depths, and curvature radii of the electrode on the generation characteristics of plasmas. In addition, we designed an equipotential multi-electrode configuration to treat a Methyl Violet solution and observe the discoloration effect. The experimental and simulation results indicate that the designed electrodes can realize glow discharge with a relative low voltage, and the generated plasmas covered a large area and were in stable state. The efficiency of water treatment is improved and optimized with the designed electrodes.

Characteristic Analysis of AC Plasma Arc in Water

An experimental system of AC arc discharge in water was designed with pole-pole electrodes and a peak voltage of 1500 V and a test circuit was set up using virtual instrument technology. The mechanism of an AC plasma arc generated in water was analyzed. The voltage- current characteristic of the AC plasma are was obtained from the waveform. The temperature characteristic was tested with a spectrum diagnosis system, and the effect of different electrode materials on the striking voltage and peak current was analyzed. The results show that when a power supply of 6 kW is applied on electrodes with a gap of 2 mm in water, the striking voltage is from 900 V to 1300 V, the arc voltage is from 40 V to 100 V, the arc current is from 2 A to 7 A, and the zero rest period is from 1 ms to 2 ms. In addition, the arc voltage and current are different for electrodes in aluminum, copper and stainless steel. The arc voltage is lower and the current is higher for an aluminum electrode than those for copper and stainless steel ones. The highest temperature of the arc is 7643 K.

Plasma-Catalytic Decomposition of 2,4-Dichlorophenol in a Dielectric Barrier Discharge with a Vermiculite ZiO2 Composite

The paper presents comparative kinetic characteristics of the decomposition of 2,4-dichlorophenol in a dielectric barrier discharge and a combined plasma-catalytic process. Vermiculite containing 5% zirconium was used as a catalyst. The destruction processes of 2,4-DCP proceed efficiently, the degree of decomposition increases in the combined plasma-catalytic process by a factor of 1.33 and reaches 80%. The experimental results were processed according to the first-order kinetic law (R2 > 0.97), according to which the effective constants (0.36 ± 0.04) and (0.51 ± 0.03) s-1 and the decomposition rates of 2,4-DCP (106 and 123 μmol/l·s) when treating model solutions without a catalyst and with vermiculite + Zr 5%, respectively, and the energy costs are 0.012 and 0.017 molecules/100eV. The main decomposition products present in the solution have been determined to be carboxylic acids, aldehydes, the contribution of which does not exceed 2%, as well as chloride ions, and in the gas phase they are carbon dioxide and molecular chlorine (the share of which does not exceed 1.5% of total chlorine content in the system).

DBD等离子体与活化水对马铃薯生长特性及产量的影响

等离子体技术在农业生产、生物医学、环境保护等领域有着广泛的应用前景。论文采用多针-板电极制备等离子体活化水装置、板-板电极等离子体直接处理马铃薯装置,对比研究了不同放电功率下等离子体活化水、直接等离子体处理对马铃薯生长特性及产量的影响。2种装置均呈丝状放电,且放电功率与外施电压正相关;当最佳放电功率匹配时,等离子体活化水、直接等离子体处理均能显著改善马铃薯生长特性及产量。等离子体活化水的放电功率为53 W时,马铃薯植株高度、茎粗、鲜重、叶绿素质量分数及产量分别提升了6.4%、18.9%、25.9%、31.7%及17.5%;直接等离子体处理马铃薯的放电功率为8 W时,植株的各参数值增幅均在10%以上。研究结果表明:放电功率变化时,等离子体活化水的理化参数(pH值、氧化还原电位、电导率、过氧化氢、硝酸根离子、亚硝酸根离子)变化显著;随着放电功率的提升,直接等离子体处理的马铃薯吸水率先增长后下降,种皮刻蚀逐渐明显。论文的研究可为DBD等离子体与活化水在农业生产领域应用提供参考。