Plastic scintillators(PSs)embedded with wavelength-shifting fibers are widely used in high-energy particle physics,such as in muon taggers,as well as in medical physics and other applications.In this study,a simulatio...Plastic scintillators(PSs)embedded with wavelength-shifting fibers are widely used in high-energy particle physics,such as in muon taggers,as well as in medical physics and other applications.In this study,a simulation package was built to evaluate the effects of the diameter and layout of optical fibers on the light yield with different configurations.The optimal optical configuration was designed based on simulations and validated using two PS prototypes under certain experimental condi-tions.A top veto tracker(TVT)for the JUNO-TAO experiment,comprising four layers of 160 strips of PS,was designed and evaluated.The threshold was evaluated when the muon tagging efficiency of a PS strip was>99%.The efficiency of three layer out of four layer of TVT is>99%,even with a tagging efficiency of a single strip as low as 97%,using a threshold of 10 photoelectrons and assuming a 40%silicon PM photon detection efficiency.展开更多
An optical code generating device has been developed based on a 1×2 asymmetric plastic optical fiber （POF） coupler. The code generating device provides a unique series of output power which are successively use...An optical code generating device has been developed based on a 1×2 asymmetric plastic optical fiber （POF） coupler. The code generating device provides a unique series of output power which are successively used as an optical code in a portable optical access-card system. The device utilizing a tap-off ratio （TOFR） technique based on a simple variation of the tap width of an asymmetric Y-branch splitter, allows various ratios of optical power to be generated. The POF coupler has been fabricated using low cost acrylic material and computer numerical control （CNC） machining technique. The simulated and fabricated results show the same linear characteristics between the TOFR and the tap width. The fabricated device enables a variation of the TOFR from 10% up to 50% for a tap width of 500 um to 1 mm.展开更多
The anti-radiation mechanism of polymeric plastic fiber is analyzed. The radiation characteristic of this type fiber is studied. Our experimental results indicate that under the low radiation dosage (below 1 kGy) the ...The anti-radiation mechanism of polymeric plastic fiber is analyzed. The radiation characteristic of this type fiber is studied. Our experimental results indicate that under the low radiation dosage (below 1 kGy) the plastic optical fiber’s transmission rate rises instead of descends while this type of fiber is radiated by γ ray, electron beam and proton beam respectively. After a period of time, it gradually reaches a constant value. But under the high radiation dosage (above 1 kGy) the fiber’s transmission rate descends after radiation. Later, it gradually goes up to a constant value.展开更多
针对传统塑料光纤在传输过程中损耗大,使用长度较短的问题,提出在光纤连接部位制备一种新型共轭聚合物CN-PPV掺杂塑料光纤放大器材料,并对其制备工艺、荧光特性和增益特性进行研究。试验结果表明,在25 mL MMA、0.032 g BPO、20~75μL n...针对传统塑料光纤在传输过程中损耗大,使用长度较短的问题,提出在光纤连接部位制备一种新型共轭聚合物CN-PPV掺杂塑料光纤放大器材料,并对其制备工艺、荧光特性和增益特性进行研究。试验结果表明,在25 mL MMA、0.032 g BPO、20~75μL n-BM的工艺条件下制备的预制棒表面状态良好,内部无气泡出现,并在拉伸温度为150~177℃的条件下成功拉丝。塑料光纤最大发射截面为1.7×10^(-20) m^(2);当泵浦光传输距离增加,光谱出现明显红移现象,最大红移波长为12 nm。在光纤长度为50 cm的条件下,掺杂质量浓度为1 mg/L的光纤存在最大增益值,达到25 dB。而掺杂质量浓度为0.2 mg/L的光纤具备持续光放大能力,更适合作为光纤放大器的制备材料。展开更多
A corrugated surface long period grating(LPG)was fabricated on a flat-shaped plastic optical fiber(POF)as a refractive index(RI)sensor by a simple pressing with the heat pressure and mechanical die press print method....A corrugated surface long period grating(LPG)was fabricated on a flat-shaped plastic optical fiber(POF)as a refractive index(RI)sensor by a simple pressing with the heat pressure and mechanical die press print method.The light propagation characteristics of an LPG imprinted on a multi-mode POF were analyzed by the method of geometrical optics.Theoretical and experimental results showed that the structural parameters of the sensor affected the RI sensing performance,and the sensor with a thinner flat thickness,a deeper groove depth of the corrugated surface LPG,and a longer LPG exhibited better RI sensing performance.When the POF with a diameter of 1 mm was pressed with the heat pressure to a flat shape with a thickness of 600μm,an LPG with a period of 300μm,a groove depth of 200μm,and a length of 6 cm was fabricated on it,and the RI sensitivity of 1447%/RIU was obtained with a resolution of 5.494×10^(−6) RIU.In addition,the influences of the POF cladding,tilting of LPG,and bending of the sensing structure were investigated.The results demonstrated that after removing the cladding and tilting or bending the LPG,the RI sensing performance was improved.When the LPG imprinted on the flat-shaped POF was bent with a curvature radius of 6/πcm,the highest sensitivity of 6563%/RIU was achieved with a resolution of 2.487×10^(−9) RIU in the RI range of 1.3330–1.4230.The proposed sensor is a low-cost solution for RI measurement with the features of easy fabrication,high sensitivity,and intensity modulation at the visible wavelengths.展开更多
A refractive index(RI)sensor based on perfluorinated plastic optical fiber(PF-POF)is introduced in this paper.The PF-POF as multi-mode fiber was side-polished(SP)to form a macro-bending single-mode-multimode-single-mo...A refractive index(RI)sensor based on perfluorinated plastic optical fiber(PF-POF)is introduced in this paper.The PF-POF as multi-mode fiber was side-polished(SP)to form a macro-bending single-mode-multimode-single-mode(SMS)structure.Both ends of the sensor were closely connected to single-mode quartz optical fiber(SMF).The spectral char-acteristics of the sensor are measured,analyzed and discussed.The results show that when the length of PF-POF is 8 cm,the macro-bending radius is 3 cm,and the SP-depth is 20μm.The intensity sensitivity reaches−219.504 dBm/RIU in the range of RI=1.330~1.356.A reference is provided for the application of PF-POF in RI sensor in the future.The sensor is featured with low-cost,good flexibility and high efficiency.展开更多
基金supported by the School of Physics at Sun Yat-sen University,China
文摘Plastic scintillators(PSs)embedded with wavelength-shifting fibers are widely used in high-energy particle physics,such as in muon taggers,as well as in medical physics and other applications.In this study,a simulation package was built to evaluate the effects of the diameter and layout of optical fibers on the light yield with different configurations.The optimal optical configuration was designed based on simulations and validated using two PS prototypes under certain experimental condi-tions.A top veto tracker(TVT)for the JUNO-TAO experiment,comprising four layers of 160 strips of PS,was designed and evaluated.The threshold was evaluated when the muon tagging efficiency of a PS strip was>99%.The efficiency of three layer out of four layer of TVT is>99%,even with a tagging efficiency of a single strip as low as 97%,using a threshold of 10 photoelectrons and assuming a 40%silicon PM photon detection efficiency.
基金supported by the Malaysian E-Science Fund under Grant No 01-01-01-SF0197
文摘An optical code generating device has been developed based on a 1×2 asymmetric plastic optical fiber （POF） coupler. The code generating device provides a unique series of output power which are successively used as an optical code in a portable optical access-card system. The device utilizing a tap-off ratio （TOFR） technique based on a simple variation of the tap width of an asymmetric Y-branch splitter, allows various ratios of optical power to be generated. The POF coupler has been fabricated using low cost acrylic material and computer numerical control （CNC） machining technique. The simulated and fabricated results show the same linear characteristics between the TOFR and the tap width. The fabricated device enables a variation of the TOFR from 10% up to 50% for a tap width of 500 um to 1 mm.
文摘The anti-radiation mechanism of polymeric plastic fiber is analyzed. The radiation characteristic of this type fiber is studied. Our experimental results indicate that under the low radiation dosage (below 1 kGy) the plastic optical fiber’s transmission rate rises instead of descends while this type of fiber is radiated by γ ray, electron beam and proton beam respectively. After a period of time, it gradually reaches a constant value. But under the high radiation dosage (above 1 kGy) the fiber’s transmission rate descends after radiation. Later, it gradually goes up to a constant value.
文摘A corrugated surface long period grating(LPG)was fabricated on a flat-shaped plastic optical fiber(POF)as a refractive index(RI)sensor by a simple pressing with the heat pressure and mechanical die press print method.The light propagation characteristics of an LPG imprinted on a multi-mode POF were analyzed by the method of geometrical optics.Theoretical and experimental results showed that the structural parameters of the sensor affected the RI sensing performance,and the sensor with a thinner flat thickness,a deeper groove depth of the corrugated surface LPG,and a longer LPG exhibited better RI sensing performance.When the POF with a diameter of 1 mm was pressed with the heat pressure to a flat shape with a thickness of 600μm,an LPG with a period of 300μm,a groove depth of 200μm,and a length of 6 cm was fabricated on it,and the RI sensitivity of 1447%/RIU was obtained with a resolution of 5.494×10^(−6) RIU.In addition,the influences of the POF cladding,tilting of LPG,and bending of the sensing structure were investigated.The results demonstrated that after removing the cladding and tilting or bending the LPG,the RI sensing performance was improved.When the LPG imprinted on the flat-shaped POF was bent with a curvature radius of 6/πcm,the highest sensitivity of 6563%/RIU was achieved with a resolution of 2.487×10^(−9) RIU in the RI range of 1.3330–1.4230.The proposed sensor is a low-cost solution for RI measurement with the features of easy fabrication,high sensitivity,and intensity modulation at the visible wavelengths.
基金supports in part by from the National key re-search and development plan of China(No.2016YFC0401902)in part by the National Natural Science Foundation of China(No.U1833104,No.61775163,No.61735011,No.61675152 and No.61405139).
文摘A refractive index(RI)sensor based on perfluorinated plastic optical fiber(PF-POF)is introduced in this paper.The PF-POF as multi-mode fiber was side-polished(SP)to form a macro-bending single-mode-multimode-single-mode(SMS)structure.Both ends of the sensor were closely connected to single-mode quartz optical fiber(SMF).The spectral char-acteristics of the sensor are measured,analyzed and discussed.The results show that when the length of PF-POF is 8 cm,the macro-bending radius is 3 cm,and the SP-depth is 20μm.The intensity sensitivity reaches−219.504 dBm/RIU in the range of RI=1.330~1.356.A reference is provided for the application of PF-POF in RI sensor in the future.The sensor is featured with low-cost,good flexibility and high efficiency.
