This paper investigates the characteristics of surface mobility when power transmission over the contact area between sub-structures is considered. An analytical formula of the surface mobility of an infinite homogene...This paper investigates the characteristics of surface mobility when power transmission over the contact area between sub-structures is considered. An analytical formula of the surface mobility of an infinite homogeneous plate over a rectangular contact area subject to a uniform, conphase force excitation is derived by using complex power method and the concept of structural intensity. This formula provides a theoretical tool for investigating power transmission over the contact area between sub-structures. The influences of the size, the dimension and the aspect ratio of the contact area on power transmission are analyzed and described according to the results calculated, that provides an effectively theoretical method for investigation of vibration isolation.展开更多
Hot deformation behavior of a novel Ni-Cr-Mo-B heavy plate steel was studied by hot compression tests,which were conducted on a Gleeble-3800thermo-mechanical simulator corresponding to the temperature range of850-1 15...Hot deformation behavior of a novel Ni-Cr-Mo-B heavy plate steel was studied by hot compression tests,which were conducted on a Gleeble-3800thermo-mechanical simulator corresponding to the temperature range of850-1 150℃ with the strain rates of 0.01-10s-1 and the true strain of 0.8.The results suggest that the majority of flow curves exhibit a typical dynamic recrystallization(DRX)behavior with an apparent single peak stress followed by agradual fall towards a steady-state stress.Important characteristic parameters of flow behavior as critical stress/strain for initiation of DRX and peak and steady-state stress/strain were derived from curves of strain hardening rate versus stress and stress versus strain,respectively.Material constants of the investigated steel were determined based on Arrhenius-type constitutive equation,and then the peak stress was predicted by the equation with the hot deformation activation energy of 379 139J/mol,and the predicted values agree well with the experimental values.Furthermore,the effect of Zener-Hollomon parameter on the characteristic points of flow curves was studied using the power law relation,and the ratio of critical stress and strain to peak stress and strain were found to be 0.91and0.46,respectively.展开更多
文摘This paper investigates the characteristics of surface mobility when power transmission over the contact area between sub-structures is considered. An analytical formula of the surface mobility of an infinite homogeneous plate over a rectangular contact area subject to a uniform, conphase force excitation is derived by using complex power method and the concept of structural intensity. This formula provides a theoretical tool for investigating power transmission over the contact area between sub-structures. The influences of the size, the dimension and the aspect ratio of the contact area on power transmission are analyzed and described according to the results calculated, that provides an effectively theoretical method for investigation of vibration isolation.
基金Sponsored by National Natural Science Foundation of China(51071019,51371030)National High Technology Research and Development Program of China(2013AA031601)National Key Technology Research and Development Program of the Ministry of Science and Technology of China(2011BAE25B01)
文摘Hot deformation behavior of a novel Ni-Cr-Mo-B heavy plate steel was studied by hot compression tests,which were conducted on a Gleeble-3800thermo-mechanical simulator corresponding to the temperature range of850-1 150℃ with the strain rates of 0.01-10s-1 and the true strain of 0.8.The results suggest that the majority of flow curves exhibit a typical dynamic recrystallization(DRX)behavior with an apparent single peak stress followed by agradual fall towards a steady-state stress.Important characteristic parameters of flow behavior as critical stress/strain for initiation of DRX and peak and steady-state stress/strain were derived from curves of strain hardening rate versus stress and stress versus strain,respectively.Material constants of the investigated steel were determined based on Arrhenius-type constitutive equation,and then the peak stress was predicted by the equation with the hot deformation activation energy of 379 139J/mol,and the predicted values agree well with the experimental values.Furthermore,the effect of Zener-Hollomon parameter on the characteristic points of flow curves was studied using the power law relation,and the ratio of critical stress and strain to peak stress and strain were found to be 0.91and0.46,respectively.