What Is the Impact of Ploughing on Eucalyptus Plantations in Bambou Mingali (Plateaux Batéké, Republic of Congo)?

Soil ploughing is an important stage in the preparation of planting, causing disturbance to the physical, chemical and biological properties of the soil. Soil ploughing can affect the availability of nutrients and water resources, and its effect can be short, medium or long-term. Soil ploughing accelerates surface heating and air circulation and encourages mineralisation by transforming organic matter into mineral salts, making nutrients soluble and accessible to plants. The aim of this study is to determine how soil ploughing affects the distribution of nutrients in the soil profile. The study focuses on nitrogen, carbon, phosphorus, calcium and magnesium, which are major elements of soil fertility on the Batéké plateaux in Congo. The results indicate that ploughing significantly modifies the distribution at depth des elements nutritifs: there is more accumulation at the surface than at depth (ei: nitrogen 1.34 t/ha ± 0.035 at 10 cm compared with 1.034 t/ha ± 0.098 at 50 cm) with a higher concentration of carbon (13.89 t/ha ± 0.87) followed by nitrogen (1.34 t/ha ± 0.035).

Effects of Ploughing Astragalus sinicus at Maturity Stage on Rice Yield and Soil Properties of Paddy Field

[Objective] The effects of ploughing Astragalus sinicus at maturity stage as green manure on paddy soil properties were studied to provide references for ad- vancing the green manure production and field sustainable development. [Methods] A three-year field positioning experiment was carried out. In the first year, five differ- ent levels （0, 2.81, 5.61, 8.42, 11.23 t/hm~） of Astragalus sinicus ploughed at matu- rity stage were designed. And in the next two years, the amounts of ploughed As- tragalus sinicus at maturity stage were based on the natural growth amounts of As- tragalus sinicus at maturity stage of the former year in each plot field. The yields of Astragalus sinicus at maturity stage were estimated and ploughed directly before rice transplanting. Rice yield, soil nutrients, biological properties and water-stable aggre- gates of paddy fields were measured as well. [Results] The effective panicles and rice yields increased significantly after ploughing Astragalus sinicus at maturity stage. Meanwhile, the organic acid content in paddy field increased and the activities of soil phosphatases, invertase and catalase were higher. The soil dissolved organic carbon also increased with the increasing application of green manure. However, excess amount of green manure inhibited the soil microbial biomass carbon content. The macro aggregates and micro aggregates gathered to middle aggregates. [Conclusion] As green manure, the use of Astragalus sinicus at maturity stage could improve soil physiochemical and biological properties, improve soil fertility and increase rice yield significantly. But the ploughing amount of Astragalus sinicus at maturity stage before rice transplanting should be less than 8.42 t/hm2 （dry weight.

Fin formation model during pre-roll ploughing of copper 3D outside fin tube

The mechanism of pre roll ploughing for 3D fins on the outside surface of copper tube was studied systematically, and especially the process and conditions of 3D fin formation were analyzed. The right mathematical model was also established. Based on the volume of fin ploughed out is equal to the volume of the metal extruded up by the extruding face of the tool, the relations between fin height, pre roll ploughing feed and pre roll ploughing depth have been achieved. With the increase of pre roll ploughing depth which must be equal to groove depth, the fin height gradually becomes larger. There are different critical feeds with the various depths of pre roll ploughing. The pre roll ploughing feed is the critical one, the height of fin is largest. And when the feed is above the critical one, the fin height will reduce with the increase of feed. The theoretical analysis basically accords with experimental results.

Effect of Ploughing Depth on the Growth and Yield of Heracleum candicans:a Threatened Medicinal Herb and a Less-explored Potential Crop of the Himalayan Region

This paper examines the effect of ploughing depths （A -- 60 cm, B -- 45 cm and C -- 30 cm） on the growth and yield of Heracleum candicans Wall （Apiaceae）, a threatened medicinal herb of the Himalayan region. This less-explored plant is being suggested as a potential crop for the mountain agriculture. The study was carried out in an orchard in Himachal Pradesh, India at 2500 m altitude, for two successive growth years. During the first year, all plants remained in juvenile state; in the second year, nearly 65 % plants produced flowers only under 60cm ploughing depth. Among its morphological traits, plant height, collar diameter and aboveground flesh weight were found to be strongly correlated （P 〈 0.01） with the belowground biomass during the first year （r =0.968, 0.925 and 0.973, respectively） and during the second year （r=0.945, 0.928 and 0.775, respectively）. Increase in the ploughing depth was significantly correlated （P〈0.01） with all growth parameters, including the belowground dry weight, marketable portion of the produce. The belowground biomass （commercial yield; 16.28 Qt/hec） at depth A was about 2.6 and 4.7 times higher than those recorded at depths B and C, respectively. The results clearly justify the importance of deep ploughing and this paper strongly recommends it for economically sustainable cropping.

Formation of integral fins function-surface by extrusion-ploughing process

An extrusion-ploughing process was presented to fabricate the integral fin function-surface. Cutting edge inclination angle and rake angle can be calculated from the tool’s geometry relationship. The description of fins’ geometry characters was standardized. The experiments show that, when the middle cutting edge’s inclination angle η is less than 35°, continuous fin will come out; when η is between 35° and 55°, the fins will be saw-tooth ones, and the fins will be torn when this angle is above 55°; when the extrusion angle θ is between 60° and 150°, the fins will appear, or else, the fins will be torn into chips from the base. Forming angle and clearance angle have little effect on fin’s formation. For continuous fin, its height is close to cutting depth when it is small, but it will become approximately constant as cutting depth grows; for saw-tooth fins, the width, the height, as well as the clearance will increase with the increase of cutting depth, but the increment of clearance is small; neither for continuous fin, nor for saw-tooth ones, cutting velocity has little influence on their structure parameters.

GYANTSE SPRING PLOUGHING CEREMONY

With a total of 765.6 hectares of plowed land,Kharmey Township is the principal place for grain production in Gyantse.Villagers, including both men and women,old or young and dressed in festival costumes,are crowding together at the edge of the field in the early morning;they place buttered tea, barley yeasted wine,sutra steamers, and incense burners for prayers

FEM analysis of workpiece curvature influence on groove deformation during plough process

To investigate the workpiece curvature influence on groove deformation,numerical studies with curvature varying from negative to positive were conducted on copper material.Groove deformations were analyzed,including groove geometry,effective stress distribution and plough force.The curled groove shape whose workpiece curvature was 0.133 mm-1 was validated by experiments.Moreover,a series of geometry models with various curvatures were introduced to analyze the change of groove deformation.The results show that positive curvatures influence groove deformation more intensively than negative or zero curvature.It is mainly due to the action of the tool forming face during plough process.

Reconstruction of Highly-efficient Smash-ridging Ecological Cultivation Method for Sustainable Yield-increasing of Soil Plough Layers

With consideration of highly-efficient use of natural resources, reducing production cost and construction of high-standard agricultural fields, rice production of good seed＋fertilizer investment is reformed on basis of research of smash-ridging technology, and rice smash-ridging ecological and highly-efficient cultivation was pro- posed, namely, smash-ridging based deeply poughing and rotary tillage technology was used to loosen soils deeply, with the depth from 13-15 cm to 26-28 cm. Fur- thermore, after soils softening, seedling slinging or direct seeding was adopted, which is dominated by natural rainfall and supplemented by artificial irrigation. The test proved that the technology help increasing yield and profits over 20%, with chemical fertilizer reduced by more than 10%, and labor cost reduced by 10%. What＇s more, if the technology applied once, no-tillage or slight tillage is recom- mended in the field, which would maintain original eco-conditions of soils and reach high yield, with energy, water, labor costs reduced in an environment-friendly way.

Effect of plough pans on the growth of soybean roots in the black-soil region of northeastern China

Plough pans （PPs）, common in the black-soil region of northeastern China, have significant effects on the root systems of crops. We conducted a field experiment to study the distribution of soybean roots under the influence of PPs. The soybean roots showed compensatory growth above the PP, with higher root length and weight in soil with a PP compared to those without a PP. Roots were heavier and longer in the 15-75 cm soil layer without a PP than with a PP. Soil porosity was lower in the PP and the soil below the PP, which likely decreased the oxygen content of the soil and induced more growth of roots above the PP. The PP is also likely to decrease infiltration of rain-water and hinder the migration of nitrate downward, which in turn increased the density and length of soybean root hairs, which, hence, promoted growth.

Mathematical model of electric hydraulic and powered support control system at a plough mining face

Given the actual working of a fully mechanized plough at a mining face, we have proposed a formula for running constraints between powered supports and a coal plough under assumed geological conditions of the coal face and, on this basis, established an automatic control model of powered supports for the coal plough face. We introduced the working principle of the powered support control system of the plough at the mining face. We established three advanced characteristics of this control system： response speed, reliability and easy maintenance of the system. As well, we briefly introduced, the principal function of primary and subordinate controllers and the realization of the communication system by a Single Bus. Ten controllers were constructed and tested in our laboratorium. The results show that the control model is practical and meets actual conditions. It provides a theoretical basis for designing a comouter control system for a oowered support system of a plough at a mining face.

Analysis and Research of Factors Affecting Coal Mining with Plough

Coal mining with ploughs is an ideal coal mining technology for thin and thinner coal seams. The existence conditions of coal seams are different for each other, which affects coal mining with ploughs to different degrees, and the application results are also different. The authors analyze the affecting factors by means of mathematical methods. The research is useful to the wide application of ploughs.

Design and Experiment of 1LFQ-325 Pneumatic Reversible Plough

A pneumatic reversible plough is developed, which complements to the tractor of 25.7-36.8 kW.The plough adopts the cylinder as reversing mechanism between the right and left plough bodies, and the cylinder can substitute the mechanical reversing mechanism. The pneumatic turnover allows the plough to be operated easily and turned over flexibly. Field experiment results show that indicators of plough performance meet the requirements of the relevant national standards.

盐碱地肥沃耕层构建水肥盐综合调控机理与技术研究进展

盐碱地是我国重要的后备耕地资源,我国历来高度重视盐碱地的改良和利用工作,但目前盐碱区淡水资源短缺严重制约了盐碱地的改良利用。如何在水资源约束下,优化调控土壤水肥盐动态是当前盐碱地可持续利用中亟待解决的关键科学问题。近年来,大量研究利用有机培肥、耕作、节水灌溉、田间覆盖、咸水利用等农艺措施,在盐碱地建立“控盐、保肥、保水”的肥沃耕作层,显著改变了水肥盐在土壤-植物-大气连续体中的运移过程,实现了盐碱地质量和产能快速提升,上述内容也日益成为盐碱地改良利用中的重要研究方向。本文系统总结了盐碱地改良和肥沃耕层构建等方面的研究进展,并针对盐碱地肥沃耕层构建下土壤水肥盐综合调控及其与植物生长的协同关系等进行了展望,以期为盐碱地可持续改良利用提供参考。

FDA批准Schering—Plough公司联合Pegintron和Rebetol用于治疗丙型肝炎的标签修订

FDA已批准先灵葆雅公司（Schering-Plough）聚乙二醇干扰素α-2b（Pegintron）和利巴韦林（Rebetol）联合治疗丙型肝炎的说明书修订。其修订内容如下：原有说明书中Rebetol的推荐剂量由一日800mg修订为一日800-1400mg（且可根据患者的体重进行具体的剂量调整），

Schering—Plough的sugammadex获得优先审核

美国FDA给了Schering—Plough公司的新型选择性肌松结合药Sugammadex（sugammadex sodium）优先审核地位。公司希望能够在今年第二季度得到FDA的决定。申请的依据是1700多名患者参加的10项全球性Ⅲ期试验，与向EU申请的文件是相同的。EMEA在去年7月已接受该药进行审核。Schering—Plough在11月收购Organon Biosciences时得到该产品。

EMEA接受Schering-Plough的生育治疗药的申报

Schering—Plough公司的一次注射，持续性卵泡刺激剂corifollitropin α（Ⅰ）的上市许可证申请已为EMEA接受审查。该公司称它近期没有将（Ⅰ）向其他任何市场申请的计划，也未推测进一步申报的潜在时机。

呼吸系统、特殊感官及皮肤用药——Schering—Plough公司申请哮喘合剂

欧洲医药管理局（EMEA）已同意审查Schering—Plough公司通过欧盟集中程序申请的皮质激素Asmanex（mometasone furoate，糠酸莫米松）（Ⅰ）与Norvartis公司的长效B2激动剂Foradil（formoterol fumarate，富马酸福莫特罗）（Ⅱ）的固定剂量吸入性合剂（Ⅲ）用于12岁及12岁以上的哮喘患者作维持治疗的上市许可证。