The feeding of coarse particles (>0.5 mm diameter) directly into a riser operating at positive pressure is important for drying and pre-heating applications. The presence of the feeding device can lead to heterogen...The feeding of coarse particles (>0.5 mm diameter) directly into a riser operating at positive pressure is important for drying and pre-heating applications. The presence of the feeding device can lead to heterogeneity of drying and heating, and is the main factor responsible for pressure loss in short conveying systems. However, there is a lack of information concerning the axial and radial distributions of coarse particles in this type of configuration, despite the recent advances when dealing with fine particles (FCC catalyst). The present work therefore investigates a vertical venturi feeder with the conveying system operating in dilute-phase regime with 1 mm spherical glass particles. Experimental assays revealed the behavior of the mass flow rate of solids in the system, and pressure measurements were made along the riser in order to evaluate the accuracy of simulations. Euler-Euler simulations provided close estimation of the experimental pressure drop and the pressure drop according to distance in the linear region. Simulation of the fluid dynamics in the riser showed that solids clusters were formed at low concentrations near the feeding device, reflecting heterogeneity in the solid phase volume fraction.展开更多
When the traditional drill and blast method is applied to rock crushing projects,it has strong vibration,loud noise and dust pollution,so it cannot be used in densely populated areas such as urban public works.We deve...When the traditional drill and blast method is applied to rock crushing projects,it has strong vibration,loud noise and dust pollution,so it cannot be used in densely populated areas such as urban public works.We developed a supercritical CO_(2)true triaxial pneumatic rock-breaking experimental system,and conducted laboratory and field tests of dry ice powder pneumatic rock-breaking.The characteristics of the blast-induced vibration velocity waveform and the evolution of the vibration velocity and frequency with the focal distance were analyzed and discussed.The fracturing mechanism of dry ice powder pneumatic rock breaking is studied.The research results show that:(1)The vibration velocity induced by dry ice powder pneumatic rock breaking decays as a power function with the increase of the focal distance;(2)The vibration frequency caused by dry ice powder pneumatic rock breaking is mainly distributed in 1–120 Hz.Due to the dispersion effect,the dominant frequency of 10–30 Hz appears abnormally attenuated;(3)The traditional CO_(2)phase change fracturing energy calculation formula is also applicable to dry ice pneumatic rock breaking technology,and the trinitrotoluene(TNT)equivalent of fracturing energy is applicable to the Sadovsky formula;(4)Dry ice powder pneumatic rock breaking is shock wave and highenergy gas acting together to fracture rock,which can be divided into three stages,among which the gas wedge action of high-energy gas plays a dominant role in rock mass damage.展开更多
Axiomatic design (AD) and theory of inventive problem solving (TRIZ) are widely used in conceptual design. Both of them have limitations, however. We presented an integrated model of these two methods to increase the ...Axiomatic design (AD) and theory of inventive problem solving (TRIZ) are widely used in conceptual design. Both of them have limitations, however. We presented an integrated model of these two methods to increase the efficiency and quality of the problem solving process for conceptual design. AD is used for systematically defining and structuring a problem into a hierarchy. Sometimes, the design matrix is coupled in AD which indicates the functional requirements are coupled. TRIZ separation principles can be used to separate non-independent design parameters, which provide innovative solutions at each hierarchical level. We applied the integrated model to the heating and drying equipment of bitumen reproduction device. The result verifies that the integrated model can work very well in conceptual design.展开更多
为解决HDT气流式烘丝机在烘丝过程中存在出口含水率控制精度低等问题,提出一种基于融合注意力时间卷积网络(Fused Attention Time Convolution Network,FATCN)的烘丝出口含水率控制方法。借助多元高斯分布检测和降噪自编码器对监测数据...为解决HDT气流式烘丝机在烘丝过程中存在出口含水率控制精度低等问题,提出一种基于融合注意力时间卷积网络(Fused Attention Time Convolution Network,FATCN)的烘丝出口含水率控制方法。借助多元高斯分布检测和降噪自编码器对监测数据进行实时处理、特征衍生与增强,利用FATCN模型对监测数据进行实时判别,精准识别控制参数的调整时机和调整量,实现烘丝过程的自动化控制。以成都卷烟厂生产的2种牌号卷烟为对象对FATCN模型、PID+人工调节和卷积神经网络模型的控制效果进行对比测试,结果表明:FATCN相较于其他2种控制方式,出口含水率平均偏差分别降低约0.105和0.086,降幅分别为60%和55%左右;干头物料质量分别减少约15.8和15.1 kg,降幅分别为12.6%和12.1%左右。该方法可为提高烘丝出口含水率的稳定性和准确性提供支持。展开更多
文摘The feeding of coarse particles (>0.5 mm diameter) directly into a riser operating at positive pressure is important for drying and pre-heating applications. The presence of the feeding device can lead to heterogeneity of drying and heating, and is the main factor responsible for pressure loss in short conveying systems. However, there is a lack of information concerning the axial and radial distributions of coarse particles in this type of configuration, despite the recent advances when dealing with fine particles (FCC catalyst). The present work therefore investigates a vertical venturi feeder with the conveying system operating in dilute-phase regime with 1 mm spherical glass particles. Experimental assays revealed the behavior of the mass flow rate of solids in the system, and pressure measurements were made along the riser in order to evaluate the accuracy of simulations. Euler-Euler simulations provided close estimation of the experimental pressure drop and the pressure drop according to distance in the linear region. Simulation of the fluid dynamics in the riser showed that solids clusters were formed at low concentrations near the feeding device, reflecting heterogeneity in the solid phase volume fraction.
基金supported by the State Key Laboratory Open Fund(No.HKLBEF202004)the Natural Science Foundation of Jiangsu Province(No.BK20201313)+2 种基金the Key Program of National Natural Science Foundation of China(No.51934007)the Major Scientific and Technological Innovation Program in Shandong Province(No.2019JZZY020505)the National Key Research and Development Program of China(No.2022YFC3004700)。
文摘When the traditional drill and blast method is applied to rock crushing projects,it has strong vibration,loud noise and dust pollution,so it cannot be used in densely populated areas such as urban public works.We developed a supercritical CO_(2)true triaxial pneumatic rock-breaking experimental system,and conducted laboratory and field tests of dry ice powder pneumatic rock-breaking.The characteristics of the blast-induced vibration velocity waveform and the evolution of the vibration velocity and frequency with the focal distance were analyzed and discussed.The fracturing mechanism of dry ice powder pneumatic rock breaking is studied.The research results show that:(1)The vibration velocity induced by dry ice powder pneumatic rock breaking decays as a power function with the increase of the focal distance;(2)The vibration frequency caused by dry ice powder pneumatic rock breaking is mainly distributed in 1–120 Hz.Due to the dispersion effect,the dominant frequency of 10–30 Hz appears abnormally attenuated;(3)The traditional CO_(2)phase change fracturing energy calculation formula is also applicable to dry ice pneumatic rock breaking technology,and the trinitrotoluene(TNT)equivalent of fracturing energy is applicable to the Sadovsky formula;(4)Dry ice powder pneumatic rock breaking is shock wave and highenergy gas acting together to fracture rock,which can be divided into three stages,among which the gas wedge action of high-energy gas plays a dominant role in rock mass damage.
基金Funded by the Natural Science Foundation of China (No. 50575083)
文摘Axiomatic design (AD) and theory of inventive problem solving (TRIZ) are widely used in conceptual design. Both of them have limitations, however. We presented an integrated model of these two methods to increase the efficiency and quality of the problem solving process for conceptual design. AD is used for systematically defining and structuring a problem into a hierarchy. Sometimes, the design matrix is coupled in AD which indicates the functional requirements are coupled. TRIZ separation principles can be used to separate non-independent design parameters, which provide innovative solutions at each hierarchical level. We applied the integrated model to the heating and drying equipment of bitumen reproduction device. The result verifies that the integrated model can work very well in conceptual design.
