Experimental study on performance of pneumatic seeding system

The purpose of this study was to promote the development of large-scale agricultural machines in China and meet the demand of air seeder localization.This study investigated the relationship between the working parameters and the performance of pneumatic seeding system,Cangmai 6004 wheat seed was used.A test platform for pneumatic seeding systems was developed,and then a series of experiments were performed based on the quadratic general rotary unitized design and response surface methodology(RSM).The seeding rate and the air flow rate were selected as affecting factors,coefficient of variation(CV)of evenness of feeding rate between rows and CV of seeding stability of total rows were assigned as the test indexes.Regression models between factors and indexes were established,and finally,an optimal equation based on this pneumatic seeding system were established as well,which can determine the proper air flow rate once the seeding rate was set based on the practical agronomic requirements.For example,when the seeding rate is set as 250 kg/hm^(2),the proper air flow rate of 7.53 m3/min can be obtained.The verification experiment results showed that the predicted working parameters obtained by RSM were feasible,which might provide a theoretical basis for further research of pneumatic seed metering systems.

Preliminary bench experiment study on working parameters of pneumatic seeding mechanism for wheat in rice-wheat rotation areas

In order to solve the serious problems of soil adhesion and blockage as well as high operating resistance for wheat seeders under the condition of sticky heavy loam clay in rice-wheat rotation area,a new concept of non-contact pneumatic seeding technology that could rip wheat seed into the soil by high pressure accelerating airflow was proposed in this paper.A preliminary bench experiment was conducted and high-speed photography technology was used to study the parameters of wheat pneumatic seeding under five levels(30%,35%,40%,45%and 50%)of soil moisture content for loam clay.Experimental results showed that:wheat seeds could be ripped into soil without damage and acquired varying degrees of germination by way of pneumatic seeding;shooting depth shown a deepening tendency with the increase in shooting velocity,and the value of seeding depth and seeding velocity are closely related to the soil moisture level,which wheat seeds can achieve higher shooting depth with relative lower shooting velocity when the soil moisture content increases continuously;none of wheat seeds could be ripped into the soil with about 2.93 m/s shooting velocity that accelerated in the form of free fall,while the shooting velocity that wheat seeds needed in order to be completely ripped into soil with 3 mm shooting depth were 40-50 m/s(30%soil moisture content),30-40 m/s(35%soil moisture content),20-30 m/s(40%soil moisture content),10-20 m/s(45%soil moisture content)and 2.93-10 m/s(20%soil moisture content),respectively.The experimental results can provide basic data and technical support for the development of non-contact wheat seeding equipment in rice-wheat rotation area.

Design and indoor simulated experiment of pneumatic rice seed metering device

In order to meet the agronomy demand for hybrid rice direct seeding,a novel precise pneumatic rice seed metering device was designed with groups of sucking holes plate,by which 3-4 seeds could be synchronously sucked and synchronously dropped into the paddy field.The plate was divided into five sections:seed sucking,seed clearing,seed carrying,seed dropping,and blank sections.The seeds were sucked in sucking section by the vacuum,carried and rotated to the dropping section with the plate,blown away in dropping section by the positive pressure air,and thrown into the dropping tube.The influences of the hole diameter,vacuum degree,and clear-up equipment on precision of metering device were discussed.Experiments were conducted to investigate the seeding precision and simulate the field emergence rates on the indoor seeding test-bed.The subjects were pregnant Indic hybrid Peizataifeng under two kinds of moisture content(23.43%and 26.07%).Other experiment conditions included the vacuum degree of 2.60 kPa,the rotation speed of seed sucking plate of 30 r/min,three sucking holes with a diameter of 1.6 mm,and the seed layer thickness of 25 mm.The seeding results showed that,in condition of no more than two seeds per hill,the emergence probabilities under the two moisture contents were 11.82%and 11.95%,respectively,and in condition of 3-4 seeds per hill,the results were 64.81%and 65.84%,respectively.With 2-5 seeds per hill,the results were 92.08%and 92.60%,respectively.If the emergence probability was 80%,under the two moisture contents,the no seed per hill probabilities were 1.33%and 0.80%respectively;the probabilities with 3-4 seeds per hill were 56.13%and 56.40%respectively;the probabilities with 5 or more seeds per hill were 10.67%and 10.13%respectively;the probabilities with 2-5 seeds per hill were 87.60%and 88.13%respectively.The results showed the simulated experiment was an efficient and economic method to assess the capability of pneumatic rice seed drilling metering device,and the precise pneumatic rice seed drilling metering device had a good prospect in practical application.

Design of an active seed throwing and cleaning unit for pneumatic rice seed metering device

To address the clogging of the rice seed metering device after a long period of operation without affecting the precision of normal seeding,an active seed throwing and cleaning unit was designed based on the fact that magnets of the same pole were mutually exclusive.The working principle of the two devices was analysed theoretically,and a mechanical model was created according to the relationship between the repulsion forces of magnets and the spring forces of springs.The super hybrid rice Y-2 You 900 with 22.5%moisture content(wet basis)was used as the test object.The whole factor experiments were carried out under different negative pressures,rotational speeds of the suction plates,and lengths of probes.The results indicated that under any test conditions,the active seed throwing and cleaning unit worked normally.The results of high-speed photography showed that the rate of seed cleaning was 100%.The results also showed that the optimal negative pressure was 0.8 kPa.The probability of 1-3 seeds per hill for the seed metering device was approximately 95%under the optimal negative pressure.The optimal length of the probe was found to be 2 mm.The average qualified rate of hill space was 96.04%under the optimal length of probe,the longer the length of the probe,the lower the qualified rate of hill space.It also showed that an active seed throwing and cleaning unit could effectively avoid the hole clogging caused by the long-term operation and had no influence on the normal operation of the pneumatic rice seed metering device.The active seed throwing and cleaning unit improved the stability of the seed metering device,and the research provided a reference for the optimal design of seed throwing and cleaning structures of the pneumatic rice seed metering device.