Surface plasmon resonance-induced tunable polarization filters based on nanoscale gold film-coated photonic crystal fibers

Surface plasmon resonance induced tunable polarization filters based on nanoscale gold film-coated photonic crystal fibers were proposed and analyzed. The characteristics of the polarization filter were calculated by finite element method （FEM）. The gold film was selectively coated on the inner wall of one cladding air hole which was located near the fiber core along the y-axis direction. When the phase of core fundamental mode and surface plasmon polaritons （SPPs） mode matches, the two modes couple with each other intensely. Numerical results show that the resonance wavelength and strength vary with fiber structural parameters and the index of the infilling liquid. The fiber parameters were optimized to achieve specific functions. Under the optimal structure, we realized a dual channel filter at the communication wavelength of 1.31 μm and 1.55 μm fory polarization direction and x polarization direction. Then a single channel polarized filter at the communication wavelength of 1.55 μm is also achieved by adjusting the refractive index of the infilling liquid. The proposed polarization filters realized dual channel filtering and single channel filtering simultaneously under the same structure for the first time to the best of our knowledge.

Ground roll attenuation using a time-frequency dependent polarization filter based on the S transform

The ground roll and body wave usually show significant differences in arrival time, frequency content, and polarization characteristics, and conventional polarization filters that operate in either the time or frequency domain cannot consider all these elements. Therefore, we have developed a time-frequency dependent polarization filter based on the S transform to attenuate the ground roll in seismic records. Our approach adopts the complex coefficients of the S transform of the multi-component seismic data to estimate the local polarization attributes and utilizes the estimated attributes to construct the filter function. In this study, we select the S transform to design this polarization filter because its scalable window length can ensure the same number of cycles of a Fourier sinusoid, thereby rendering more precise estimation of local polarization attributes. The results of applying our approach in synthetic and real data examples demonstrate that the proposed polarization filter can effectively attenuate the ground roll and successfully preserve the body wave.

Robust adaptive polarization analysis method for eliminating ground roll in 3C land seismics

To improve the data quality of converted waves, and better identify and suppress the strong ground-roll interference in three-component （3C） seismic recordings on land, we present an adaptive polarization filtering method, which can effectively separate the ground- roll interference by combining complex polarization and instantaneous polarization analysis. The ground roll noise is characterized by elliptical plane polarization, strong energy, low apparent velocity, and low frequency. After low-pass filtering of the 3C data input within a given time-window of the ground roll, the complex covariance matrix is decomposed using the sliding time window with overlapping data and length that depends on the dominant ground-roll frequency. The ground-roll model is established using the main eigenvectors, and the ground roll is detected and identified using the instantaneous polarization area attributes and average energy constraints of the ground-roll zone. Finally, the ground roll is subtracted. The threshold of the method is stable and easy to select, and offers good ground- roll detection. The method is a robust polarization filtering method. Model calculations and actual data indicate that the method can effectively identify and attenuate ground roll while preserving the effective signals.

Modification of polarization filtering technique in HF ground wave radar

The polarization filter using three orthogonal linear polarization antennas can suppress more disturbances than the polarization filter using two orthogonal linear polarization antennas in HF ground wave radar. But the algorithm of the threedimension filter is relatively complicated and not suitable for real-time processing. It can＇t use linear and nonlinear polarization vector translation technique directly. A modified polarization filter which is simple and has same suppressing ability as the three-dimension polarization filter is given. It only has half parameters of the primary one. Some problems about estimation of polarization parameters and selection of disturbances are discussed. A method of holding the phase of radar backscatter signal constantly is put forward so that unstationary disturbance signal can be processed.

Novel polarization filter design for wideband radar

Usually the polarization of the interference and the target backscattering may vary constantly, so the optimal receiving polarization of the polarization filter should be recalculated, which makes the filter realization very difficult. Also the predict method of the necessary parameters is not explained in most papers, which makes the polarization filter realization impossible. A novel modi- fied interference suppression （MIS） polarization filter is proposed, which resolves these problems by a new polarization designed strategy. The computation of this polarization filter is easy in most conditions, and the necessary parameters estimation method in real time is introduced, which makes polarization filter design possible.

A tunable infrared plasmonic polarization filter with asymmetrical cross resonator

A tunable infrared plasmonic polarization filter is proposed and investigated in this paper. The filter is based on the sandwich absorption structure which consists of three layers. The top layer is an array of asymmetrical cross resonator. The middle and bottom layers are dielectric spacer and metal film respectively. By absorbing specific wavelength of the incident light perfectly, the reflection spectrum of the structure shows filter performance. The calculated results show that the absorption wavelength is strongly dependent on the length of branch of the asymmetrical cross resonator which is parallel to the light polarization and independent of the length of the vertical one. Therefore, the asymmetrical cross resonator filter structure opens the way for freely tuning the filtering wavelength for a different light polarization. We can fix a resonant wavelength （absorption wavelength） corresponding to one polarization and change the resonant wavelength for the other polarization by adjusting the corresponding branch length of the asymmetrical cross resonator, or change the two resonant wavelengths of both two polarizations at the same time.

Photonic crystal fiber polarization filter with two large apertures coated with gold layers

A novel photonic crystal fiber（PCF） polarization filter is designed and fabricated; it consists of two large apertures coated with gold. The asymmetric structure separates the resonance position in the vertical direction well. Due to the metal layer covering, loss is greatly improved. Finite element method is applied for numerical simulation. The influences of varying gold thickness and varying the diameters and the center positions of the larger apertures on filtering performance are evaluated. Theory of coupling between surface plasma and core mode is introduced. By modulating the parameters, we realize a single polarization filter at 1.31 μm and 1.55 μm. The basal mode loss in the y direction can reach 1408.80 dB/cm at 1.31 μm and 1911.22 dB/cm at 1.55 μm respectively, but basal mode loss in the x direction is relatively small, 0.82 dB/cm and 1.87 dB/cm. In addition, two kinds of broadband polarization filters are proposed. If the fiber length is set to 200 μm,the extinction ratio is greater than 20 dB with width of 570 nm and 490 nm. The filter has simple structure and excellent performance.

Wideband Tunable Frequency-Doubling Optoelectronic Oscillator Using a Polarization Modulator and an Optical Bandpass Filter

A wideband tunable frequency-doubling optoelectronic oscillator （FD-OEO） is proposed and experimentally demonstrated based on a polarization modulator and an optical bandpass filter （OBPF）. The central frequency of the correspondingly fundamental OEO could be adjusted by tuning the bandwidth and central frequency of the OBPF, which could also be regarded as a photonic-assisted tunable microwave filter. The frequency tuning range of the FD-OEO covers from 9.5 to 32.8？GHz, and the single sideband phase noise of the fundamental signal is lower than -100dBc/Hz at an offset of 10？kHz. Moreover, the frequency stability of the generated signal is investigated by measuring its Allan deviation. The Allan deviation of the generated fundamental signal at 10？GHz is 2.39×10^-9.

On measured-error pretreatment of bionic polarization navigation

A signal pre-treatment algorithm based on combination of 3-dimension system identification and Kalman filtering estimation（3DSKE）is proposed.The aim of designing the 3DSKE algorithm is to reduce errors caused by random noise,but leave the systematical errors caused by signal source remained to be solved by a special method.The 3DSKE algorithm is especially suitable for time series of pure measured data without dynamic equation and on-line real-time execution.The simulated result shows that the 3DSKE algorithm can help the basic theoretic calculation to realize feasible,stable,fast,high accurate and auto-executing computing process for the navigation applications.

A high performance tunable optical filter based on cascaded polarization interference filter

A new kind of tunable optical filter is proposed for DWDM optical communication application. It is based on cascaded polarization interference filter (PIF). The period and bandpass width of each PIF are decided by its optical path difference between o-ray and e-ray (OPDOE). When their OPDOEs are proportionately designed, the tuning range and bandpass width depend on OPDOE in the first and the last PIF, respectively. The tuning range, bandpass width and crosstalk are independent each other. The crosstalk is related to the OPDOE ratios among PIFs and can be suppressed by designing the PIF's OPDOE. A set of OPDOE is suggested that are l1, 2 × l1, 22 ×l1, 23 ×l1, 24 ×l1, ..., 2N-4 × l1, 15 × 2N-7 ×l1, 10 × 2N-6 × l1 and 2N-2 ×l1 from the first to the last. This suggested OPDOEs can yield -50-dB crosstalk for any tuning range and bandpass width. The insert loss is less than 1 dB. As its loose alignment requirement, there is no limitation on cascaded PIF number. When 11 PIFs are cascaded, it can achieve 170-nm tuning range, -50-dB crosstalk, bandpass width applicable to 25-GHz channel spacing and 1 dB insert loss.

A position sensor based on grating projection with spatial filtering and polarization modulation

A position sensor based on grating projection with spatial filtering and polarization modulation is presented. A grating is projected onto the object to be measured through a 4f optical system with a spatial filter. After reflected by the object, the grating projection is imaged on a detection grating through another 4f optical system to form moiré fringes, The polarization modulated moiré signal is detected to obtain the position information of the object. In the position sensor, the moiré signal varies sinusoidally with the position of object. The measurement is independent of the incident intensity on the projection grating and the reflectivity of the object to be measured, In experiments, the effectiveness of the position sensor is proved, and the root mean square （RMS） error at each measurement position is less than 13 nm.

Intense ke V IAP generation by orthogonally polarized multicycle midinfrared two-color laser fields

We theoretically investigate the attosecond pulse generation in an orthogonal multicycle midinfrared two-color laser field. It is demonstrated that multiple continuum-like humps, which consist of about twenty orders of harmonics and an intensity of about one order higher than the adjacent normal harmonics, are generated when longer wavelength driving fields are used. By filtering these humps, intense isolated attosecond pulses（IAPs） are directly generated without any phase compensation. Our proposal provides a simple technique to generate intense IAPs with various central photon energies covering the multi-ke V spectral regime by using multicycle midinfrared driving pulses with high pump energy in the experiment.

Ultranarrow bandwidth tunable atomic filter via quantum interference-induced polarization rotation in Rb vapor

We report the experimental demonstration of an ultranarrow bandwidth atomic filter by optically induced polarization rotation in multilevel electromagnetically induced transparency systems in hot Rb vapor. With a coupling intensity of 2.3 W/cm^2, the filter shows a peak transmission of 33.2% and a bandwidth of 10 MHz. By altering the coupling frequency, a broad tuning range of several Doppler linewidths of the D1 line transitions of STRb atoms can be obtained. The presented atomic filter has useful features of ultranarrow bandwidth, and the operating frequency can be tuned resonance with the atomic transition. Such narrowband tunable atomic filter can be used as an efficient noise rejection tool in classical and quantum optical applications.

Filter control polarization mode dispersion in dispersion managed soliton systems

In this paper, the dispersion managed soliton (DMS) transmission equation is built on considering the effects of polarization mode dispersion (PMD) and filter control. The DMS transmission of filtering control in constant birefringence fibers is firstly analyzed by varitional method, from which the evolving rules of characteristical DMS parameters are obtained. Secondly, the stability of DMS transmission and its timing jitter are investigated in the random varying birefringence fibers with the conventional model of PMD. The results reveal that filter control DMS system has powerful robustness to PMD effects and DMS's timing jitter can be decreased considerably with the help of filters.

Flexible polarization demultiplexing method based on an adaptive process noise covariance Kalman filter

A flexible polarization demultiplexing method based on an adaptive Kalman filter（AKF） is proposed in which the process noise covariance has been estimated adaptively. The proposed method may significantly improve the adaptive capability of an extended Kalman filter（EKF） by adaptively estimating the unknown process noise covariance. Compared to the conventional EKF, the proposed method can avoid the tedious and time consuming parameter-by-parameter tuning operations. The effectiveness of this method is confirmed experimentally in 128 Gb/s 16 QAM polarization-division-multiplexing（PDM） coherent optical transmission systems. The results illustrate that our proposed AKF has a better tracking accuracy and a faster convergence（about 4 times quicker）compared to a conventional algorithm with optimal process noise covariance.