Quantification of polarization distribution from polarizing light microscopy images of ferroelectric single crystals

Qualification of polarization can be realized either on a macroscopic scale as an average property by P-E hysteresis measurements or on a nano/micro scale by piezoelectric force microscopy,transmission electron microscopy,scanning electron microscopy,and so on.However,visualization and qualification of polarization distribution in the micron to millimeter scale is still a challenge.Polarizing light microscopy(PLM)is often used in the study of ferroelectric domain structures mainly for domain patterns.A phe-nomenon called“chromatic polarization”has been observed in transparent ferroelectric crystals by using a crossed-PLM system viewed with white light,which contains rich information about local polariza-tion distribution.In this study,an automatic full-angle light intensity detection(AFALID)algorithm com-bined with colorimetry is developed to analyze the distribution of nonuniform local spontaneous polar-ization distribution in transparent ferroelectric single crystals.Temperature-dependent spontaneous po-larizations from the color analysis for PMN-0.36PT single crystals with single tetragonal domain state are in good coincidence with those extracted from temperature-dependent hysteresis loops and pyroelectric current measurements.We further apply this method to quantify the nonuniform domain distributions with nano-indentations.This non-contact and non-destructive characterization can provide fast and au-tomatic detection of polarization distributions in ferroelectric materials.

Light-modulated graphene-based φ_(0) Josephson junction and -φ_(0) to φ_(0) transition

We investigate the chiral edge states-induced Josephson current–phase relation in a graphene-based Josephson junction modulated by the off-resonant circularly polarized light and the staggered sublattice potential.By solving the Bogoliubov–de Gennes equation,a φ_(0) Josephson junction is induced in the coaction of the off-resonant circularly polarized light and the staggered sublattice potential,which arises from the fact that the center of-mass wave vector of Cooper pair becomes finite and the opposite center of-mass wave vector to compensate is lacking in the nonsuperconducting region.Interestingly,when the direction of polarization of light is changed,-φ_(0) to φ_(0) transition generates,which generalizes the concept of traditional 0–πtransition.Our findings provide a purely optical way to manipulate a phase-controllable Josephson device and guidelines for future experiments to confirm the presence of graphene-based φ_(0)Josephson junction.

Self-powered circularly polarized light detector based on asymmetric chiral metamaterials

Circularly polarized light(CPL)has been given great attention because of its extensive application.While several devices for CPL detection have been studied,their performance is affected by the magnitude of photocurrent.In this paper,a self-powered photodetector based on hot electrons in chiral metamaterials is proposed and optimized.CPL can be distinguished by the direction of photocurrent without external bias owing to the interdigital electrodes with asymmetric chiral metamaterials.Distinguished by the direction of photocurrent,the device can easily detect the rotation direction of the CPL electric field,even if it only has a very weak responsivity.The responsivity of the proposed detector is near 1.9 mA/W at the wavelength of 1322 nm,which is enough to distinguish CPL.The detector we proposed has the potential for application in optical communication.

Circularly Polarized Light-Enabled Chiral Nanomaterials:From Fabrication to Application

For decades,chiral nanomaterials have been extensively studied because of their extraordinary properties.Chiral nanostructures have attracted a lot of interest because of their potential applications including biosensing,asymmetric catalysis,optical devices,and negative index materials.Circularly polarized light(CPL)is the most attractive source for chirality owing to its high availability,and now it has been used as a chiral source for the preparation of chiral matter.In this review,the recent progress in the field of CPL-enabled chiral nanomaterials is summarized.Firstly,the recent advancements in the fabrication of chiral materials using circularly polarized light are described,focusing on the unique strategies.Secondly,an overview of the potential applications of chiral nanomaterials driven by CPL is provided,with a particular emphasis on biosensing,catalysis,and phototherapy.Finally,a perspective on the challenges in the field of CPL-enabled chiral nanomaterials is given.

UV-Polarizing Linear Polyyne Molecules Aligned in PVA

Electronic absorption bands of conjugated linear carbon chain molecules, namely polyynes H(C≡C)nH (n=5-7), are exploited to devise light-polarizing films applicable to the UV. Laser ablated polyynes are separated in size and dispersed in a film of polyvinyl alcohol (PVA), which is stretched to align the trapped linear polyyne molecules inside. As a nature of the structural anisotropy, transition dipole of the UV absorption for polyyne molecules is in parallel with the molecular axis and the absorption occurs only for the electromagnetic wave having the amplitude of its electric vector along the molecular axis. Aligned and fixed orientationally in the solid PVA film, polyyne molecules act as selective absorbers of one of the polarization components of incident light at particular wavelength. Using a light source of linearly polarized UV light, whose direction of polarization is rotatable, angular dependence of the absorption intensity is investigated for the stretched PVA film containing aligned polyyne molecules and analyzed in terms of an order parameter in the theory of linear dichroism.

Detecting Spin Bias with Circularly Polarized Light

We theoretically study the spin transport through a two-terminal quantum dot device under the influence of a symmetric spin bias and circularly polarized light. It is found that the combination of the circularly polarized light and the applied spin bias can result in a net charge current. The resultant charge current is large enough to be measured when properly choosing the system parameters. The resultant charge current can be used to deduce the spin bias due to the fact that there exists a simple linear relation between them. When the external circuit is open, a charge bias instead of a charge current can be induced, which is also measurable by present technologies. These findings indicate a new approach to detect the spin bias by using circularly polarized light.

Light-modulated electron retroreflection and Klein tunneling in a graphene-based n-p-n junction

We investigate the electron retroreflection and the Klein tunneling across a graphene-based n-p-n junction irradiated by linearly polarized off-resonant light with the polarization along the x direction.The linearly polarized off-resonant light modifies the band structure of graphene,which leads to the anisotropy of band structure.By adjusting the linearly polarized light and the direction of n-p-n junction simultaneously,the electron retroreflection appears and the anomalous Klein tunneling,the perfect transmission at a nonzero incident angle regardless of the width and height of potential barrier,happens,which arises from the fact that the light-induced anisotropic band structure changes the relation of wavevector and velocity of electron.Our finding provides an alternative and flexible method to modulate electron retroreflection and Klein tunneling.

MONTE CARLO SIMULATION OF POLARIZED LIGHT SCATTERING IN TISSUES

We investigate the propagation of polarized light in fibrous tissues such as muscle and skin.The myofibrils and collagen fibers are approximated as long cylinders and the tissue phantom is composed of spherical and cylindrical structures.We apply Monte Carlo method based on this phantom to simulate and analyze polarization imaging process of muscle.The good agreement between the simulation results and the experimental results validate the assumption of the phantom composition.This paper also presents how to describe the fiber orientation distribution and tissue anisotropy according to three parameters derived from the polarization imaging.

Depolarizing isotropic collisions of the CN solar molecule with electrons

Existence of linear polarization,formed by anisotropic scattering in the photosphere,has been demonstrated observationally as well as theoretically and is called second solar spectrum(SSS).The SSS is distinguished by its structure,which is rich in terms of information.In order to analyze the SSS,it is necessary to evaluate the(de)polarizing effect of isotropic collisions between CN solar molecules and electrons or neutral hydrogen atoms.This work is dedicated to calculations of the polarization transfer rates associated with CN-electron isotropic collisions.We show that usual rates serve as a proxy for polarization transfer rates.Then,we take advantage of available usual excitation collisional rates obtained via sophisticated quantum methods in order to derive the polarization transfer rates for the X^2Σ+-B^2Σ+(violet) and X^2Σ+-A^2Π(red) systems of CN.Our approach is based on the infinite order sudden(IOS)approximation and can be applied for other solar molecules.We discuss the effectiveness of collisions with electrons on the SSS of the CN lines.Our results contribute to reducing the degree of complication in modeling the formation of the SSS of CN.

E®ect of light polariztion on pattern illumination super-resolution imaging

Far-¯eld°uorescence microscopy has made great progress in the spatial resolution,limited by light diffraction,since the super-resolution imaging technology appeared.And stimulated emission depletion(STED)microscopy and structured illumination microscopy(SIM)can be grouped into one class of the super-resolution imaging technology,which use pattern illumination strategy to circumvent the di®raction limit.We simulated the images of the beads of SIM imaging,the intensity distribution of STED excitation light and depletion light in order to observe effects of the polarized light on imaging quality.Compared to¯xed linear polarization,circularly polarized light is more suitable for SIM on reconstructed image.And right-handed circular polarization(CP)light is more appropriate for both the excitation and depletion light in STED system.Therefore the right-handed CP light would be the best candidate when the SIM and STED are combined into one microscope.Good understanding of the polarization will provide a reference for the patterned illumination experiment to achieve better resolution and better image quality.

Relationship between Colored Microstructure under Polarized Light and Shape Recovery Characteristics on the Thermomechanical Cycled CuAlNi Single Crystals

The paper studied the relationship between microstructure and shape recovery characteristics by using colored microstructure analysis under polarized light on the thermomechanical cycled CuAlNi single crystals. The two-way shape memory effect in quenched thin bar resulted from the preferential formation/extinction of martensite variant due to the internal quench stress, and the variant was formed at an angle of about 45 deg. with the tension direction ([001] of the βphase). Initial thermomechanical cycling under relatively low stress single variant stress-induced martensite was formed at an angle of 45 deg. with the tension and its morphology was a lath of parallel twins. More than one group of variants were formed after several training cycles and such variants also caused tilting of some thermally formed accommodated martensite. By overheating the trained sample containing stabilized multi-variants of stress-induced martensite, very coarse martensite structure with a strong asymmetry was produced, which caused the reverse two-way shape memory effect.

Static Laser Light Scattering Studies from Red Blood Cells

A homemade Static Light scattering studies has been used to determine angle resolved scattered intensity for different polarization states of the incident laser light. Classical light scattering set ups are being used to study morphological aspects of scatterers using simple set ups using low power lasers. Red blood cells form rather interesting as well as a challenging system for scattering experiments. The scattering spectrometer consists of a scattering arm, a scattering turn table and collimating arm. Along with polarizers integrated in the collimating arm as well as scattering arms ensures collection of scattered flux with the required polarization state. This technique is being developed for its in vitro studies using fresh red blood cells. A brief review of the theoretical models used for scattering from Red Blood Cells (RBC) has been discussed in the paper. Scattering pattern (scattering plots) as well as polar plots of scattered flux have been determined for different polarization state of the incident light. Insight into the orientation of major axis of particles can be inferred from the polar plots.

Advancing respirable coal mine dust source apportionment:a preliminary laboratory exploration of optical microscopy as a novel monitoring tool

Exposure to respirable coal mine dust(RCMD)can cause chronic and debilitating lung diseases.Real-time monitoring capabilities are sought which can enable a better understanding of dust components and sources.In many underground mines,RCMD includes three primary components which can be loosely associated with three major dust sources:coal dust from the coal seam itself,silicates from the surrounding rock strata,and carbonates from the inert‘rock dust’products that are applied to mitigate explosion hazards.A monitor which can reliably partition RCMD between these three components could thus allow source apportionment.And tracking silicates,specifically,could be valuable since the most serious health risks are typically associated with this component-particularly if abundant in crystalline silica.Envisioning a monitoring concept based on field microscopy,and following up on prior research using polarized light,the aim of the current study was to build and test a model to classify respirable-sized particles as either coal,silicates,or carbonates.For model development,composite dust samples were generated in the laboratory by successively depositing dust from high-purity materials onto a sticky transparent substrate,and imaging after each deposition event such that the identity of each particle was known a priori.Model testing followed a similar approach,except that real geologic materials were used as the source for each dust component.Results showed that the model had an overall accuracy of 86.5%,indicating that a field-microscopy based moni-tor could support RCMD source apportionment and silicates tracking in some coal mines.

The Infiltration Process and Texture Transition of 2D C/C Composites

2D needle-punched fiber felt was infiltrated by a kind of rapid isothermal chemical vapor infiltration technique. The infiltration process and texture transition of the infiltrated C/C composites were investigated. The porosity and the variations of the cumulative pore volume were determined by mercury porosimetry. The texture of matrix carbon was studied under a polarized light microscope. The results show that the relative mass gain of the sample increases directly as the infiltration time at the initial stage until 20 h, and subsequently the increasing rate of the relative mass gain decreases gradually with the prolonging of infiltration time. Three layers of pyrocarbon were formed around fibers. Low-textured pyrocarbon was obtained at the initial stage. With the densification going on, high-textured pyrocarbon was formed on the surface of low-textured pyrocarbon. Then, low-textured pyrocarbon was produced again during the final stage of densification. The texture transition is ascribed to the variation of the ratio of cumulative inner surface area to volume of pores and the gas partial pressure in pores.

Tuning the velocity and flux of a low-velocity intense source of cold atomic beam

We investigate experimentally and numerically the quantitative dependence of characteristics of a low-velocity intensity source（LVIS） of atomic beam on light parameters, especially the polarization of cooling laser along the atomic beam axis（pushing beam）. By changing the polarization of the pushing beam, the longitudinal mean velocity of a rubidium atomic beam can be tuned continuously from 10 to 20 m/s and the flux can range from 3 × 10^-8 to 1 × 10^-9 atoms/s, corresponding to the maximum sensitivity of the velocity with respect to the polarization angle of 20（m/s）/rad and the mean sensitivity of flux of 1.2 × 10^-9（atoms/s）/rad. The mechanism is explained with a Monte-Carlo based numerical simulation method, which shows a qualitative agreement with the experimental result. This is also a demonstration of a method enabling the fast and continuous modulation of a low-velocity intense source of cold atomic beam on the velocity or flux,which can be used in many fields, like the development of a cold atomic beam interferometer and atom lithography.

Peculiar influence of linearly polarized spectrum illumination patterns on the sensitivity characteristics of locust response to polarized light

This study investigated the influence of different linearly polarized spectrum lights on locusts polartactic response characteristics linearly polarized vector sensitivity mode and polartactic response by using linearly polarized spectrum vector light module and experimental device.The objective was to clarify the vector sensitivity characteristics and functional effect of linearly polarized light spectrum intensity on locusts polartactic response,determine the influence specificity of linearly polarized spectrum illumination properties on locusts polarization-related behavior.When spectrum and illumination were constant,locusts polartactic response,presenting the response feature of sine and cosine function change specificity,was related to spectrum attribute.The visual acuity effect stimulated by violet spectrum was the best,whereas the optical distance modulation effect induced by orange spectrum was the strongest.When illumination was enhanced,locusts vector sensitivity mode shifted to present the specific sensitivity prompted by light intensity at long distance and inhibited by light intensity at short distance.Moreover,the regulating function of violet spectrum was the strongest,and the regulatory mutation effect of orange spectrum was the least significant.Simultaneously,locusts polartactic sensitivity to 300°vector at 100 lx,whereas to 240°vector at 1000 lx of linearly polarized violet light was the strongest.Locusts polartactic aggregation and visual tendency sensitivity to 90°vector at 100 lx,whereas to 270°vector at 1000 lx of linearly polarized violet light was the strongest.The heterogeneous regulation function of different linearly polarized spectrum couplings with light intensity led to significant variations in locusts vector sensitivity mode.This was derived from the antagonistic and specific tuning characteristics of locusts polartactic vision,reflecting the integrated output effect of locusts vector dependence regulated by linearly polarized spectrum intensity attribute.The findings were significant for the construction of pest polarization induction light sources and the investigation of the sensitive physiology pathway of locusts polarization vision.

Accurate Jones Matrix of the Practical Faraday Rotator

The Jones matrix of practical Faraday rotators is often used in the engineering calculation of non-reciprocal optical field. Nevertheless, only the approximate Jones matrix of practical Faraday rotators has been presented by now. Based on the theory of polarized light, this paper presents the accurate Jones matrix of practical Faraday rotators. In addition, an experiment has been carried out to verify the validity of the accurate Jones matrix. This matrix accurately describes the optical characteristics of practical Faraday rotators, including rotation, loss and depolarization of the polarized light. The accurate Jones matrix can be used to obtain the accurate results for the practical Faraday rotator to transform the polarized light, which paves the way for the accurate analysis and calculation of practical Faraday rotators in relevant engineering applications.

Significant discrepancy between the ionization time for parallel and anti-parallel electron emission in sequential double ionization

The ionization time in sequential double ionization with an elliptically polarized laser pulse has been examined theo- retically using a semiclassical method. The significant discrepancy between the ionization time for parallel and anti-parallel electron emission is predicted numerically for the first time. The impact of the carrier envelope phase offset is also studied in this work.

Measurement of Rotatory Optics Element in Tensor Dielectric Matrix for Rotatory Optical Fiber

The rotatory optics element in the tensor dielectric coefficient matrix is an important para-(meter) for analyzing and calculating a rotatory optical fiber by electromagnetic theory. But the mea-(surement) of rotatory optics element is difficult for the rotatory optical fiber. A simple principle and method for measuring rotatory optics element are put forward in this paper. Firstly by using electromagnetic theory it was demonstrated that the rotatory optics element has a simple linear relation with the rotatory angle, and then the rotatory optics element has a simple linear relation with the magnetic field strength (or bias current in the helix coil) . Secondly a measurement system for the rotatory optics element in the rotatory optical fiber was designed. Using the measurement system the rotatory element can be obtained by measuring the bias current simply.

Discrimination and quantification of scar tissue by Mueller matrix imaging with machine learning

Scarring is one of the biggest areas of unmet need in the long-term success of glaucoma filtration surgery.Quantitative evaluation of the scar tissue and the post-operative structure with micron scale resolution facilitates development of anti-fibrosis techniques.However,the distinguishment of conjunctiva,sclera and the scar tissue in the surgical area still relies on pathologists'experience.Since polarized light imaging is sensitive to anisotropic properties of the media,it is ideal for discrimination of scar in the subconjunctival and episcleral area by characterizing small differences between proportion,organization and the orientation of the fibers.In this paper,we defined the conjunctiva,sclera,and the scar tissue as three target tissues after glaucoma filtration surgery and obtained their polarization characteristics from the tissue sections by a Mueller matrix microscope.Discrimination score based on parameters derived from Mueller matrix and machine learning was calculated and tested as a diagnostic index.As a result,the discrimination score of three target tissues showed significant difference between each other(p<0.001).The visualization of the discrimination results showed significant contrast between target tissues.This study proved that Mueller matrix imaging is effective in ocular scar discrimination and paves the way for its application on other forms of ocular fibrosis as a substitute or supplementary for clinical practice.