Regional pole assignment for uncertain delta-operator systems

The pole assignment in a specified disk by state feedback for uncertain delta-operator systems is studied. By making use of algebra Riccati equations, a sufficient and necessary condition of pole assignment for a kind of parameter uncertain delta-operator system in a specified disk by state feedback is presented. And the design method of state feedback controller is also developed. The proposed method can unify some previous related results of continuous and discrete time systems into the delta framework. The efficiency of the design method is illustrated by a numerical example.

A Pole Assignment Design Method of Process Control System for Tubular Heat Exchanger

This Paper has first studied the simplified model of tubular heat exchanger which is widely used in the industry and other field.On the basis of reference 2,a new pole assignment design method of pro-cess control system with derivative control action is found.For the above system,the method and the for-mation which calculate the feedback matrix K and gain matrix L is given,and the simulation of the system is made.

On the Role of Zeros in the Pole Assignment of Scalar High-Order Fully Actuated Linear Systems

It is well known that for a linear system in state space form,controllability is equivalent to arbitrary pole assignment by state feedback.This brief points out that for a scalar high-order fully actuated linear system,the pole assignment problem is solvable if and only if the desired pole set of the closed-loop system should not include the zero set of the open-loop system if the implementation issue of the controller is taken into account,that is,controllability cannot guarantee arbitrary pole assignment by state feedback.

Regional Pole Assignment Robustness for Linear VSC System Subject to Structured Perturbations

An approach is proposed to analyze pole assignment robustness in some specific regions for linear variable structure control systems subject to structured perturbations.A sufficient condition of robustness is presented and the upper bound of structured perturbations which ensure the robustness is computed by numerical analysis.

ON STATE FEEDBACK AND POLE ASSIGNMENT OF THE SECOND ORDER COUPLED SINGULAR DISTRIBUTED PARAMETER SYSTEMS IN HILBERT SPACE

State feedback and pole assignment of the second order coupled singular distributed parameter systems are discussed via functional analysis and operator theory in Hilbert space, in which infinite many poles are changed. The solutions of the problem and the constructive expression of the solutions are given by the generalized inverse of bounded linear operator. This research is theoretically important for studying the pole assignment and stabilization of the singular distributed parameter systems.

Robust Adaptive Pole Assignment Design

This note presents a pole placement indirect adaptive algorithm for discrete SISO time invariant process, which is robust with respect to unmodeled dynamics and bounded disturbances. The resulting closed loop system is shown to be globally stable subject to certain assumptions.

ON POLE ASSIGNMENT OF DISTRIBUTED PARAMETER SYSTEMS WITH UNBOUNDED INPUT ELEMENTS

In this paper, the pole assignment problem is considered for a class of distributed parameter systems with unbounded input element and with multiple spectral structure. A formula on the spectrum of the closed loop operator is proved and a formula of pole assignment is obtained. Finally, an example concerning a beam vibration is given.

Neuromorphic Continuous-Time State Space Pole Placement Adaptive Control

A neuromorphic continuous-time state space pole assignment adaptive controller is proposed, which is particularlyappropriate for controlling a large-scale time-variant state-space model due to the parallely distributed nature ofneurocomputing. In our approach, Hopfield neural network is exploited to identify the parameters of a continuous-timestate-space model, and a dedicated recurrent neural network is designed to compute pole placement feedback control law inreal time. Thus the identification and the control computation are incorporated in the closed-loop, adaptive, real-timecontrol system. The merit of this approach is that the neural networks converge to their solutions very quickly andsimultaneously.

Control strategies and experimental verifications of the electromagnetic mass damper system for structural vibration control

The electromagnetic mass damper （EMD） control system, as an innovative active control system to reduce structural vibration, offers many advantages over traditional active mass driver/damper （AMD） control systems. In this paper, studies of several EMD control strategies and bench-scale shaking table tests of a two-story model structure are described. First, two structural models corresponding to uncontrolled and Zeroed cases are developed, and parameters of these models are validated through sinusoidal sweep tests to provide a basis for establishing an accurate mathematical model for further studies. Then, a simplified control strategy for the EMD system based on the pole assignment control algorithm is proposed. Moreover, ideal pole locations are derived and validated through a series of shaking table tests. Finally, three benchmark earthquake ground motions and sinusoidal sweep waves are imposed onto the structure to investigate the effectiveness and feasibility of using this type of innovative active control system for structural vibration control. In addition, the robustness of the EMD system is examined. The test results show that the EMD system is an effective and robust system for the control of structural vibrations.

THE INVERSE PROBLEM OF OPTIMAL REGULATORS AND ITS AP-PLICATION

This paper presents a new solution to the inverse problem of linear optimal regulators to minimize a cost function and meet the requirements of relative stability in the presence of a constant but unknown disturbance. A state feedback matrix is developed using Lyapunov’s second method. Moreover, the relationships between the state feedback matrix and the cost function are obtained, and a formula to solve the weighting matrices is suggest- ed. The developed method is applied successfully to design the horizontal loops in the inertial navigation system.

Design of Intersample Response in a Hard Disk Control System

The present paper discusses a design method for the head position in a Hard Disk Drive （HDD） control system. In the HDD control system, the sampling interval of the head position is constrained because of the hardware specifications, but the hold interval of the control input is not constrained. In the present study, a multirate control system is designed, in which the sampling and the hold intervals are not equal. A multirate control law, which stabilizes a closed-loop system, is extended using newly introduced parameters such that the sample response of the plant output is maintained. Furthermore, intersample ripples in the steady state are eliminated using the new design parameters, which can be selected independently of the sample response. As a result, the intersample response can be improved independently of the sample response. The proposed method is applied to a benchmark problem of an HDD system, and its effectiveness is demonstrated.

Necessary and sufficient condition for modified Nevanlinna-Pick interpolation for closed-loop pole placement

Nevanlinna-Pick interpolation theory has sevaral applications, in particular in robust control. In this paper, we derive necessary and sufficient condition so that a modification of the Nevanlinna-Pick theory can place the closed-loop poles inside a circular region in the left half of the complex plane in addition to the control system design being robust and internally stable. Numerical examples illustrate the theory.

Surface-to-air Missile Autopilot Design Using LQG/LTR Gain Scheduling Method

Linear quadratic Gaussian with loop transfer recovery （LQG/LTR） gain scheduling technique is utilized to design gain scheduling autopilot for surface-to-air missile. In order to eliminate the artificial uncertainties that the traditional ＂trial and error＂ de- sign process introduces into system, a method to design target loop based on pole assignment is proposed, which provides an explicit algorithm to construct the matrix differential Riccati equation （MDRE） based on the expected poles determined by the performance specifications. Meanwhile, it is proved that by introducing integrators to augment plant dynamics the fast modes of LQG/LTR gain scheduling controller can be restrained effectively, which alleviates an obstacle for the engineering application of LQG/LTR gain scheduling technique. The proposed method is applied in the design of LQG/LTR gain scheduling autopilot for a surface-to-air missile. The design and simulation results indicate that the fast modes of controller are eliminated obviously, and that the dynamic characteristics of autopilot are stable when flight Mach number and altitude vary.

Design of equivalent-input-disturbance estimator using a generalized state observer

In this paper, we present a design method based on the concept of equivalent input disturbance （EID） to reject disturbances for a linear time-invariant system. A generalized state observer （GSO） is used to estimate an EID of the external disturbances, and the pole-assignment algorithm is employed to select the matrices of the GSO. Simulation and experimental results of a rotational speed control system demonstrate the validity of our method.

H_∞ Control of a 5th- order Model of Synchronous Generators

：This paper deals with H∞ control of a 5th-order model of synchronous generators. First,byusing the method of exact linearization, we transform the 5th-order model into a linear one. Then we assignthe pole of the linearized model in the open left half plane. Finally, we apply the design method of linear H∞control to get a state feedback controller.