Removal of Dye Using Lignin-Based Biochar/Poly(ester amide urethane)Nanocomposites from Contaminated Wastewater

The pursuit of incorporating eco-friendly reinforcing agents in polymer composites has accentuated the exploration of various natural biomass-derived materials.The burgeoning environmental crisis spurred by the discharge of synthetic dyes into wastewater has catalyzed the search for effective and sustainable treatment technologies.Among the various sorbent materials explored,biochar,being renewable,has gained prominence due to its excellent adsorption properties and environmental sustainability.It has also emerged as a focal point for its potential to replace other conventional reinforcing agents,viz.,fumed silica,aluminum oxide,treated clays,etc.This study introduces a novel class of polymer nanocomposites comprising of lignin-based biochar particles and poly(ester amide urethane)matrix via a feasible method.The structural evaluation of these nanocomposites was accomplished using Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,and powder X-ray diffraction.The polymer nanocomposites exhibited superior mechanical properties with an increment in tensile strength factor by 45%in comparison to its pristine matrix,along with an excellent toughness value of 90.22 MJm^(−3)at a low loading amount of only 1 wt%.The composites showed excellent improvement in thermal properties with a sharp rise in the glass transition temperature(Tg)value from−28.15℃to 84℃,while also championing sustainability through inherent biodegradability attributes.Beyond their structural prowess,these polymer nanocomposites demonstrated excellent potential as adsorbents,displaying efficient removal of malachite green and tartrazine dyes from aqueous systems with a removal efficiency of 87.25%and 73.98%,respectively.The kinetics study revealed the pseudo second order model to be the precision tool to assess the dye removal study.Complementing this,the Langmuir adsorption isotherm provided a framework to assess the sorption features of the polymer nanocomposites.Overall,these renewable biochar integrated polymer matrices boast remarkable recovery capabilities up to seven cycles of usage with an excellent dye recovery percentage of 95.21%for the last cycle,thereby defining sustainability as well as economic feasibility.

Synthesis of Methyl-substituted Phthalazinone-based Aromatic Poly(amide imide)s

A series of novel aromatic poly ( amide imide)s containing phthalazinone moieties were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with four diimide-dicarboxylic acids by Yamazaki phosphorylation method with the inherent viscosity of 0.36~0.65 dL/g. These polymers had high glass transition temperatures above 300C and they lost 10% weight between 426~475C in N2. The structure of diamine 1 and the polymers was confirmed by IR, 1H NMR and MS. The obtained polymers were readily soluble in polar solvents such as NMP, m-cresol etc. and easily cast into tough, flexible films. The X-ray indicated that they are all amorphous.

SYNTHESIS OF NEW AROMATIC POLY(AMIDE IMIDE)S FROM UNSYMMETRICAL EXTENDED DIAMINE CONTAINING A PHTHALAZINONE MOIETY

The direct polymerization of an unsymmetrical kink non-coplanar heterocyclic diamine (1) with various aromatic bis(trimellitimide)s (2a-e) using triphenyl phosphite and pyridine as condensing agents could generate a series of new aromatic poly(amide imide)s (3a-e) containing the kink non-coplanar phthalazinone heterocyclic units in the polymer main chains with inherent viscosities of 0.58-0.66 dL/g. The polymers are readily soluble in a variety of solvents such as N,N- dimethylformamide, N,N-dimethylacetamide, dimethyl sulfoxide, N-methyl-2-pyrrolidinone, pyridine and m-cresol and can be cast to form flexible and tough films. The glass transition temperatures of polymers (Tg) are in the range of 301-327°C, and the temperatures for 5% weight loss in nitrogen are in the range of 498-521 'C.

Synthesis of a Poly(amide-imide)from 5,6-Diphenyl-1-chloroformyl3,4-benzenedicarboxylic Anhydride and Bis (4-aminophenyl)ether

A novel poly (amide-imide) was prepared from a novel monomer: 5,6-diphenyl-chloroformyl-3,4-benzenedicarboxylic anhydride and bis (4-aminophenyl) ether. The polymer was characterized by FTIR. (HNMR)-H-1. DSC and TGA.

Synthesis of Poly(aryl amide imide)s Derived from o-diphenyltrimellitic Anhydride

The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o diphenyltrimellitic anhydride are described.The poly(aryl amide imide)s having inherent viscosities of 0.39-1.43dL/g in N methyl 2 pyrrolidinone at 30℃,were prepared by polymerization with aromatic diamines in N,N-dimethylacetamide and subsequent chemical imidization.All the polymers were amorphous,readily soluble in aprotic polar solvents such as DMAC,NMP,DMF,DMSO,and m cresol,and could be cast to form flexible and tough films.The glass trsanition temperatures were in the range of 284-336℃,and the temperatures for 5% weight loss in nitrogen were above 468℃.

Effect of nano Al_(2)O_(3) addition on cycling performance of poly(ether block amide)based solid-state lithium metal batteries

A novel poly(ether block amide)(PEBA)based solid-state polymer electrolyte(SPE)was prepared using a casting method,in which 20wt%lithium(Li)bis-(trifluoromethanesulfonyl)imide(LiTFSI)and aluminum oxide(Al_(2)O_(3))nanoparticles were used as the Li salt and solid plasticizer,respectively.In the case of addition of 3wt%Al_(2)O_(3) nanoparticles,ion conductivity of the obtained PEBA 2533-20wt%LiTFSI-3wt%Al_(2)O_(3) SPE was 3.57×10^(−5) S cm^(−1) at 25°C.Furthermore,the Li symmetrical battery assembled with it showed excellent cycling stability(1000 h)at 0.1 mA cm^(−2).While,the assembled all-solid-state Li/PEBA 2533-20%LiTFSI-3wt%Al_(2)O_(3)/LiFePO 4(areal capacity:0.15 mAh cm^(−2))battery maintained 94.9%of the maximal capacity(133.9 mAh g^(−1@0.1) mA cm^(−2))at 60°C even after 650 cycles with a superior average coulombic efficiency(CE)of 99.84%.By using X-ray photoelectron spectroscope(XPS),self-aggregation layer(SAL)of polyamide 12(PA12)of PEBA 2533 was discovered,which should contribute to promoting the robustness of lithium fluoride(LiF)enriched solid-electrolyte interphase(SEI)layer.In addition,it is considered that the state of interface between SPE and cathode should be the cause of voltage polarization of the full cell.

New optically active poly(amide-imide)s derived from N,N'-(4,4-diphthaloyl)-bis-L-leucine and hydantoin derivatives:Synthesis and properties

Six new optically active poly（amide-imide）s （5a-f） were synthesized through the direct polycondensation reaction of N,N′-（4,4′- diphthaloyl）-bis-L-leucine （3） with six hydantoin derivatives （4a-f）. Tripbenyl phosphite （TPP）/pyridine in the presence of calcium chloride （CaCl2） and N-methyl-2-pyrrolidone （NMP） were successfully applied for direct polycondensation. The polycondensation reactions produce a series of new poly（amide-imide）s （5a-f） in high yields, and inherent viscosity between 0.42 and 0,55 dL/g. The resulting poly（amide-imide）s （5a-f） were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis （TGA and DTG）, solubility test and FT-IR spectroscopy.

Synthesis of Novel Poly(aryl ether amide)s Containing the Phthalazinone Moiety

Two novel heterocyclic diamine monomers: 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl] (2H)phthalazin-1-one and 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)-3,5-dimethylphenyl](2H)phthalazin-1-one were successfully synthesized from readily available heterocyclic bisphenol-like monomers in two steps in high yield. A series of novel poly(aryl ether amide)s containing the phthalazinone moiety were successfully prepared by the direct polymerization of the novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents.

Synthesis and Characterization of Poly(ether imide)s Containing m-Methyl and Phthalazinone Moieties

Three novel poly(ether imide)s were synthesized by one-step solution polymerization from 2-(3, 4-dicarboxyl-N-phenyl)-4-(3, 4-dicarboxyl-phenoxyl-4-(2-methyl)-phenyl)-2, 3- phthal-azin-1-one dianhydride and three amines, and characterized. The polymers show good solubility and thermal properties.

Highly Heat-Resistant Materials for Microelectronics:Hydrodynamic,Optical,and Conformational Properties of Fluorine Containing Poly(Amido-ortho-Hydroxy Amide)

The polycondensation of the mixture of diamines 5,5-methylene bis(2-aminophenol) and 4,4-(hexafluoroisopropylidene)dianiline(molar ratio 0.8:0.2) with isophthaloyl dichloride was used to synthesize poly(amido-o-hydroxy amide)(POA-F)-new heat resistant binder of the composites for microelectronics. The copolymer was fractionated, its hydrodynamic, optical, and conformational properties were researched, and molecular masses(ММ) of the fractions were defined. The polydispersity index was estimated. Based on experimental data, calculation of the size of a segment of Kuhn characterizing degree of an intramolecular orientation order and value of coefficients of the equation of Mark-Kuhn-Hauvink for viscometric and diffusion data were performed. It was demonstrated that introducing 20 mol % of the monomer with-CF3-groups does not lead to any changes in conformational properties of the macromolecules and does not change the degree of intramolecular orientational order(the Kuhn segment length). Optical characteristics of POA-F solutions are virtually similar to the corresponding values for POA prepared with the use of single amine-containing component-5,5-methylene bis(2-aminophenol). The received MM distribution for POA-F(prepolymer) provided the solubility of its films in alkaline solutions. The heat resistance(τ5 and τ10-temperatures corresponding to 5% and of 10% PBO-F mass loss of a polymer) of the powders and the films of PBO, PBO-F were determined. The electrophysical parameters-dielectric permittivity(ε) and dielectric loss tangent(tan δ) of the PBO-F films decreased down to 3.30 and 0.017, in comparison 3.40 and 0.025 for PBO respectively.

Synthesis and Characterization of Poly (ether imide)s Containing Phthalazinone and Isopropyl Moieties

A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step solution condensation polymerization in nr-cresol. The polymer was characterized by FTIR, NMR, molecular weights, glass transition temperature, thermal degradation temperature and WAXD.

SYNTHESIS AND CHARACTERIZATION OF HYPERBRANCHED POLY(ESTER-AMIDE)S BASED ON GALLIC ACID AND DL-2-AMINOBUTYRIC ACID

A novel AB3-type monomer was prepared from gallic acid and DL-2-aminobutyric acid, and used for the synthesis of the biocompatible hyperbranched poly(ester-amide)s by self-polycondensation. The polymers were characterized via FTIR and NMR spectroscopy and thermal analysis, and the average degree of branching of the polymers was estimated to be 0.75. The polymers with abundant acetyl end groups were found to be amorphous with lower intrinsic viscosity, better thermal stability and excellent solubility.

Hyperbranched Poly(amide-ester) Mildly Synthesized and Its Characterization

AB2-type-prepolymerized monomer was rapidly （2 h） prepared at room temperature （25 ℃） using commercially available maleic anhydride （MA） and diethanolamine （DEA） as raw materials. By employing toluene-p-sulfonic acid as a catalyzer, a series of hyperbranched poly（amide-ester） （HBPAE） were successfully synthesized from prepared AB2 monomer by solution condensation polymerization through ＂one-step process＂ or ＂pseudo one-step process＂ （using pentaerythritol as a center core）. The processes were carried out at high temperature of 120 ℃ for 6 h in air atmosphere （inert protection free） with reduced pressure distillation （0.08--0.096 MPa）. The results of FT-IR, UV-Vis, TGA, and intrinsic viscosity testing by Ubbelodhe viscometer showed that the prepared HBPAEs possess three-dimensional configuration with unsaturated conjugate structure, large numbers of branches and numerous terminal hydroxyl groups. These result in their low viscosity, high solubility and thermal stability.

Polyvinyl acetate/poly(amide-12-b-ethylene oxide) blend membranes for carbon dioxide separation

In this paper,blend membranes from polyvinyl acetate(PVAc)and block copolymer poly(amide-12-b-ethylene oxide)(Pebax1074)are prepared by solution casting and solvent evaporation method.Although they are homogeneous on a macro-scale,the observations from DSC and SEM indicate micro-phase separation for PVAc/Pebax1074 blend membranes.With the increase of Pebax1074 content,gas permeabilities of CO2,H2,N2and CH4all increase greatly.PVAc/Pebax1074 blend membranes with high PVAc content are appropriate for CO2/CH4separation.The temperature dependence of gas permeability is divided into rubbery region and glassy region.The activation energies of permeation in rubbery region are smaller than those in glassy region,and they all decrease with increasing Pebax1074 content.For N2,H2and CH4,their gas permeation properties are mainly influenced by the dual-mode sorption and hydrostatic pressure effect.But for CO2,its permeability increases with the increase of pressure due to CO2-induced plasticization effect,which is more obvious for PVAc/Pebax1074 blend membranes with high PVAc content.

Poly(amide-6-b-ethylene oxide)/[Bmim][Tf2N] blend membranes for carbon dioxide separation

Poly（amide-6-b-ethylene oxide）（Pebax1657）/1-butyl-3-methylimidazo-lium bis[trifluoromethyl）sulfonyl]-imide（[Bmim][Tf2N]） blend membranes with different [Bmim][Tf2N] contents were prepared via solution casting and solvent evaporation method. The permeation properties of the blend membranes for CO2, N2,CH4 and H2 were studied, and the physical properties were characterized by differential scanning calorimeter（DSC） and X-ray diffraction（XRD）. Results showed that [Bmim][Tf2N] was dispersed as amorphous phase in the blend membranes, which caused the decrease of Tg（PE） and crystallinity（PA）. With the addition of [Bmim][Tf2N], the CO2 permeability increased and reached up to approximately 286 Barrer at 40 wt%[Bmim][Tf2N], which was nearly double that of pristine Pebax1657 membrane. The increase of CO2 permeability may be attributed to high intrinsic permeability of [Bmim][Tf2N], the increase of fractional free of volume（FFV） and plasticization effect. However, the CO2 permeability reduced firstly when the [Bmim][Tf2N]content was below 10 wt%, which may be due to that the small ions of [Bmim][Tf2N] in the gap of polymer chain inhibited the flexibility of polymer chain; the interaction between Pebax1657 and [Bmim][Tf2N]decreased the content of EO units available for CO2 transport and led to a more compact structure. For Pebax1657/[Bmim][Tf2N] blend membranes, the permeabilities of N2, H2 and CH4decreased with the increase of feed pressure due to the hydrostatic pressure effect, while CO2 permeability increased with the increase of feed pressure for that the CO2-induced plasticization effect was stronger than hydrostatic pressure effect.

SYNTHESIS AND MORPHOLOGICAL STRUCTURE OF POLY (PHENYLENE SULFIDE AMIDE)

Poly(phenylene sulfide amide) (PPSA) has been synthesized by using sulfur as S source which reacts with dichlorobenzamide (DCBA) and alkali in polar organic solvent at the atmospheric pressure. The polymer structures were determined by elemental analysis, FT-IR and H-1-NMR. It is shown that the yielded polymer has linear structure and its structure unit is -p-C6H4-CONH -p-C6H4-S-. The polymer morphology was studied by X-ray diffraction and polarized microscopy. The results show that PPSA is a crystalline polymer and its spherulites are the aggregation of nontwisting lamella or micro-thread structure. Under shearing force, these crystals are dispersed to form micro-fibrillar structure. The decomposition kinetics of PPSA was also studied at different heating rates. The decomposition energy of PPSA is higher than that of PPS.

SYNTHESIS, CHARACTERIZATION OF CHIRAL POLY(ESTER AMIDE)S DERIVED FROM L-ISOLEUCINE

A series of new optically active aromatic poly(ester amide)s containing a chiral group in the side chain prepared from the p-toluenesulfonic acid salt of o,o'-bis(leucyl)-hexanediol (TS-+LHD+TS-) and p-phthaloyl chloride and styrene-2,5- dicarbonyl chloride styrene have been synthesized by interfacial polymerization. The structure of the monomer is elucidated by FT-IR and elemental analysis. The thermal properties of the polymers were studied by DSC and TGA. The chiroptical properties of the above polymer have also been studied by circular dichroism (CD) spectroscopy. Results indicated that these polymers form helical structures.

Synthesis, Characterization and Properties of Poly(aryl amides) Containing Methoxy Substituted Phthalazinone Moiety

A novel aromatic diamine, 1, 2-dihydro-2-（4-aminophenyl）-4-[3-methoxy-4-（4-aminophenoxy）]-2, 3-phthalazin-l-one （OO-DA） containing aza heterocyclic structure was synthesized from the bisphenol-like monomer in two steps and used for preparing new aromatic polyamides with high inherent viscosity of 0.89-1.03 dL.g^-1. The structures of diamine and polymers obtained were confirmed by MS, PT-IR, WAXD and ^1H-NMR. The synthesized polymers exhibited high glass transition temperature in the range of 281-307℃ and good solubility in polar solvents.

Synthesis and Characterization of Poly(ether amide)s Containing Bisphthalazinone and Ether Linkages

A novel aromatic diacid, 4, 4'-bis[2-(4-carboxyphenyl)phthalazin-1-one-4-yl]-bisphenyl ether III, containing bisphthalazinone and ether linkages was prepared from nucleophilic substitution of p-chlorobenzonitrile with the bisphenol-like monomer I, followed by alkaline hydrolysis of the intermediate dinitrile II. A series of poly(ether amide)s containing bisphthala- zinone and ether linkages derived from diacid III and aromatic diamines were synthesized by one-step solution condensation polymerization using triphenyl phosphite and pyridine as condensing agents. Moreover, the properties of poly(ether amide)s including thermal stability, solubility and crystallinity were also studied.

Preparation of Poly (Phenylene Sulfide Amide) by Sulfur Solution Route

A new process for preparing poly(phenylene sulfide amide, PPSA), which is by reaction of sulfur instead of sodium sulfide as S source with dichlorobenzamide (DCBA) and alkali in polar organic solvent at the atmospheric pressure (called sulfur solution route), is reported in the present paper. The influences of polymerization time, molar ratio of precursors, catalyst and solvent upon the polymer were investigated. To seek the best parameters of polymerization, orthogonal design was employed in the experiments. The results indicate that the molar ratio of precursors is the most significant effect on both of viscosity and yield of the polymer. The suitable parameters for preparing the related polymer are presented. The polymer was characterized by IRspectrum, 1HNMRspectrum and Raman spectrum, etc.