Polybutylacrylate (PBA)/poly(methyl methacrylate) (PMMA) core-shell elastic particles (CSEP), whose rubbery core diameter ranged from 0.08 μm to 1.38μm, were synthesized by using conventional emulsion polymerization...Polybutylacrylate (PBA)/poly(methyl methacrylate) (PMMA) core-shell elastic particles (CSEP), whose rubbery core diameter ranged from 0.08 μm to 1.38μm, were synthesized by using conventional emulsion polymerization, multi-step emulsion polymerization, and soapless polymerization. Allyl methacylate (ALMA) and ethylene glycol dimethacrylate (EGDMA) were selected as crosslinking reagents for core polymerization. Methacrylic acid (MAA) was used as functional co-monomer with methyl methacrylate as shell component. The content of vinyl groups in PBA rubbery core increased with the amount of crosslinking reagents. The core-shell ratio affected great on the morphology of the complex particles. Furthermore, the amounts of carboxyl on the surface of core-shell particles, copolymerized with acrylic acid, were determined by potentiometric titration. Results showed that methylacrylic acid was distributed mostly on the surface of particles.展开更多
Five secondary amine terminated poly（ester-amine）s （defined as PEA） with controlled molecular structures were synthesized through reacting excessive piperazine with phthalicdiglycol diacrylate （PDDA） and 1,1,1-t...Five secondary amine terminated poly（ester-amine）s （defined as PEA） with controlled molecular structures were synthesized through reacting excessive piperazine with phthalicdiglycol diacrylate （PDDA） and 1,1,1-trimethylolpropane triacrylate （TMPTA） at a constant secondary amine/acrylate group ratio of 1.5/1 and at different PDDA/TMPTA molar ratios. Both IR and ^1H-NMR spectra indicated that all acrylate groups were consumed in the reaction, based on which the structural parameters were calculated from the ^1H-NMR spectra. With decreasing PDDA/TMPTA ratio, the content of secondary amine, degree of branching, molecular weight, Tg and Td increased accordingly. These polymers were further used as both crosslinkers and flexibilizers for a linear epoxy resin E51 to form cured films under ambient condition. The gel content, relative hardness and Tg of the resulting films increased as PEA molecules changed from linear to highly branching structures. Due to the flexibility of PEA molecules, all the films possessed excellent mechanical performance.展开更多
By means of ultrasonic attenuation apparatus, the ultrasonic velocity and attenuation ofanhydride-cured epoxy resins (EP)/poly (ethylene oxide) (PEO) blends were measured on thebasis of pulse-echo method. It was found...By means of ultrasonic attenuation apparatus, the ultrasonic velocity and attenuation ofanhydride-cured epoxy resins (EP)/poly (ethylene oxide) (PEO) blends were measured on thebasis of pulse-echo method. It was found that the sonic velocity of the blends decreased as thetemperature increased, but attenuation coefficient increased and possessed a peak value. Largervelocity and smaller attenuation coefficient(α)can be obtained from perfect crosslinking networkstructures of pure DGEBA cured with phthalic anhydride(PA). As for cured DGEBA/PEO blendsystems,sonic velocity decreased as a function of PEO concentration,but attenuation coefficient(α) increased.展开更多
In this paper, the preparation of graphene oxide was achieved by Hummers method and the surface modification was achieved by poly(hexaneditiol), which was a synthetic thermotropic liquid crystalline polymer. The c-PHD...In this paper, the preparation of graphene oxide was achieved by Hummers method and the surface modification was achieved by poly(hexaneditiol), which was a synthetic thermotropic liquid crystalline polymer. The c-PHDT/GO/PF composites were prepared by blending, rolling and compression molding techniques. Then, the as-prepared samples were characterized by FTIR, Raman, XRD, TGA and POM to obtain information on their structures and properties. After that, the effects of c-PHDT/GO content on the mechanical properties, friction performance and dynamic mechanical performance of c-PHDT/GO/PF composites were studied by Mechanical and Dynamic Mechanical Analysis (DMA) methods. Also, Scanning Electron Microscope (SEM) was used for the characterization of wear and fracture surface morphology. The results revealed that the reinforcing effect of c-PHDT/GO was significant as a considerable enhancement on the mechanical performance of c-PHDT/GO/PF composite as compared to pure phenol-formaldehyde composites was observed: the impact strength, bending modulus and bending strength increased from 1.63 kJ/m2, 8.61 GPa and 41.55 MPa to 2.31 kJ/m2, 10.16 GPa and 54.40 MPa respectively at the c-PHDT/GO content = 0.75%. Moreover, the initial storage modulus increased by 28.4%, while the wear mass loss decreased by 17.8%. More importantly, the reinforcement by c-PHDT/GO was further enhanced as compared to GO/PF and p-PHDT/GO/PF composites, the impact strength of c-PHDT/GO/PF composite increased by 27.6% and 11.1%, the bending strength increased by 11.8% and 7.6%, the initial storage modulus increased by 16.2% and 4.2% and the mass loss due to wear decreased by 12.7% and 8.8%, respectively. Based on these results, we can conclude that the surface modification of GO by poly(hexanedithiol), which includes synergistic effect by c-PHDT and GO, improves the interfacial adhesion between GO and the resin matrix, thus reinforcing the composites.展开更多
Epoxy resin based Unsaturated poly(ester-amide) resins (UPEAs) can be prepared by many methods but here these were prepared by reported method [1]. These UPEAs were then treated with acrylotl chloride to afford acryla...Epoxy resin based Unsaturated poly(ester-amide) resins (UPEAs) can be prepared by many methods but here these were prepared by reported method [1]. These UPEAs were then treated with acrylotl chloride to afford acrylated UPEAs resin (i.e. AUPEAs). Interacting blends of equal proportional AUPEAs and vinyl ester epoxy (VE) resin were prepared. APEAs and AUPEAs were characterized by elemental analysis, molecular weight determined by vapour pressure osmometer and by IR spectral study and by thermogravimetry. The curing of interacting blends was monitored on differential scanning calorimeter (DSC). Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized by thermogravimetry (TGA).展开更多
The aim of the study was to evaluate the effect of adding acrylamide monomer （AAm） on the characterization, flexural strength, flexural modulus and thermal degradation temperature of poly（methyl methacrylate） （P...The aim of the study was to evaluate the effect of adding acrylamide monomer （AAm） on the characterization, flexural strength, flexural modulus and thermal degradation temperature of poly（methyl methacrylate） （PMMA） denture-base resins. Specimens （n= 10） were fabricated from a conventional heat-activated QC-20 （Qc-） and a microwave heat-activated Acron MC （Ac-） PMMA resins. Powder/ liquid ratio followed the manufacturer＇s instructions for the control groups （Qc-c and Ac-c） and for the copolymer groups, the resins were prepared with 5% （-5）, 10% （- 10）, 15% （- 15） and 20% （-20） acrylamide contents, according to the molecular weight ratio, respectively. The flexural strength and flexural modulus were measured by a three-point bending test. The data obtained were statistically analyzed by Kruskal-Wallis test （a=O.05） to determine significant differences between the groups, The chemical structures of the resins were characterized by the nuclear magnetic resonance spectroscopy. Thermal stabilities were determined by thermogravimetric analysis （TGA） with a heating rate of 10 ~C.min-1 from 35 ~C to 600 ~C. Control groups from both acrylic resins showed the lowest flexural strength values. Qc-15 showed significant increase in the flexural strength when compared to Qc-c （P〈O.01）. Ac-10 and Ac-15 showed significance when compared to Ac-c （P〈O.01）. Acrylamide incorporation increased the elastic modulus in Qc-10, Qc-15 and Qc-20 when compared to Qc-c （P〈0.01）. Also significant increase was observed in Ac-10, Ac-15 and Ac-20 copolymer groups when compared to Ac-c （P〈0.01）. According to the 1H-nuclear magnetic resonance （NMR） results, acrylamide copolymerization was confirmed in the experimental groups. TGA results showed that the thermal stability of PMMA is increased by the insertion of AAm.展开更多
By the reaction of poly(bromoacetyl styrene) (EBPS) with thiaurea (TU), a kind of novel chelating resin with heterocyaclic ring of sulfur and nitrogen, poly[4-(2-amino)thiazoleyl-4- vinylbenzene], was synthesized. Its...By the reaction of poly(bromoacetyl styrene) (EBPS) with thiaurea (TU), a kind of novel chelating resin with heterocyaclic ring of sulfur and nitrogen, poly[4-(2-amino)thiazoleyl-4- vinylbenzene], was synthesized. Its structure was characterized by FTIR and elemental analysis. The factors which have influence on the reaction such as reaction time, solvents, and molar ratio of reactants were investigated.展开更多
Three secondary amine terminated hyperbranched poly（ester-amine）s （defined as HPEA1, HPEA2 and HPEA3） were synthesized from piperazine （A2） and trimethylolpropane triacrylate （TMPTA, B3） at their molar ratios ...Three secondary amine terminated hyperbranched poly（ester-amine）s （defined as HPEA1, HPEA2 and HPEA3） were synthesized from piperazine （A2） and trimethylolpropane triacrylate （TMPTA, B3） at their molar ratios of 2.5：1, 2.25：1 and 2.0：1, respectively. The polymers were analyzed by 1H NMR, GPC, DSC and TGA. The results indicated that the ratio of secondary amine to tertiary amine and the content of secondary amine decreased, while the molecular weight, molecular weight distribution and glass transition temperature （Tg） increased from HPEA1 to HPEA3. Due to their reactive terminal groups and flexible chains, these polymers further reacted with an epoxy resin （E51） to form cured films under ambient conditions. With increasing the ratio between secondary amine groups and epoxy groups from 1：2 to 2：1, the gel content, film hardness and onset decomposing temperature of the cured samples increased. The good film performances should make the polymers as the components of non-solvent coating materials.展开更多
Macroporous poly (vinyl acetate-co-triallyl isocyanurate) beads were prepared with suspension polymerization method. The copolymer beads were then transformed into poly (vinyl alcohol-co-triallyl isocyanurate) by est...Macroporous poly (vinyl acetate-co-triallyl isocyanurate) beads were prepared with suspension polymerization method. The copolymer beads were then transformed into poly (vinyl alcohol-co-triallyl isocyanurate) by ester exchange reaction. Aminocarboxylic acids were immobilized on the copolymer beads by the esterification of hydroxyl groups with diethyl-lenetriaminepentaacetic bisanhydride. The weak acid exchange capacities, specific surface areas and mean pore diameters of the resultant resin beads were measured.展开更多
文摘Polybutylacrylate (PBA)/poly(methyl methacrylate) (PMMA) core-shell elastic particles (CSEP), whose rubbery core diameter ranged from 0.08 μm to 1.38μm, were synthesized by using conventional emulsion polymerization, multi-step emulsion polymerization, and soapless polymerization. Allyl methacylate (ALMA) and ethylene glycol dimethacrylate (EGDMA) were selected as crosslinking reagents for core polymerization. Methacrylic acid (MAA) was used as functional co-monomer with methyl methacrylate as shell component. The content of vinyl groups in PBA rubbery core increased with the amount of crosslinking reagents. The core-shell ratio affected great on the morphology of the complex particles. Furthermore, the amounts of carboxyl on the surface of core-shell particles, copolymerized with acrylic acid, were determined by potentiometric titration. Results showed that methylacrylic acid was distributed mostly on the surface of particles.
基金The work was financially supported by the National Science Foundation of China(Nos.20204005,50233030).
文摘Five secondary amine terminated poly（ester-amine）s （defined as PEA） with controlled molecular structures were synthesized through reacting excessive piperazine with phthalicdiglycol diacrylate （PDDA） and 1,1,1-trimethylolpropane triacrylate （TMPTA） at a constant secondary amine/acrylate group ratio of 1.5/1 and at different PDDA/TMPTA molar ratios. Both IR and ^1H-NMR spectra indicated that all acrylate groups were consumed in the reaction, based on which the structural parameters were calculated from the ^1H-NMR spectra. With decreasing PDDA/TMPTA ratio, the content of secondary amine, degree of branching, molecular weight, Tg and Td increased accordingly. These polymers were further used as both crosslinkers and flexibilizers for a linear epoxy resin E51 to form cured films under ambient condition. The gel content, relative hardness and Tg of the resulting films increased as PEA molecules changed from linear to highly branching structures. Due to the flexibility of PEA molecules, all the films possessed excellent mechanical performance.
文摘By means of ultrasonic attenuation apparatus, the ultrasonic velocity and attenuation ofanhydride-cured epoxy resins (EP)/poly (ethylene oxide) (PEO) blends were measured on thebasis of pulse-echo method. It was found that the sonic velocity of the blends decreased as thetemperature increased, but attenuation coefficient increased and possessed a peak value. Largervelocity and smaller attenuation coefficient(α)can be obtained from perfect crosslinking networkstructures of pure DGEBA cured with phthalic anhydride(PA). As for cured DGEBA/PEO blendsystems,sonic velocity decreased as a function of PEO concentration,but attenuation coefficient(α) increased.
文摘In this paper, the preparation of graphene oxide was achieved by Hummers method and the surface modification was achieved by poly(hexaneditiol), which was a synthetic thermotropic liquid crystalline polymer. The c-PHDT/GO/PF composites were prepared by blending, rolling and compression molding techniques. Then, the as-prepared samples were characterized by FTIR, Raman, XRD, TGA and POM to obtain information on their structures and properties. After that, the effects of c-PHDT/GO content on the mechanical properties, friction performance and dynamic mechanical performance of c-PHDT/GO/PF composites were studied by Mechanical and Dynamic Mechanical Analysis (DMA) methods. Also, Scanning Electron Microscope (SEM) was used for the characterization of wear and fracture surface morphology. The results revealed that the reinforcing effect of c-PHDT/GO was significant as a considerable enhancement on the mechanical performance of c-PHDT/GO/PF composite as compared to pure phenol-formaldehyde composites was observed: the impact strength, bending modulus and bending strength increased from 1.63 kJ/m2, 8.61 GPa and 41.55 MPa to 2.31 kJ/m2, 10.16 GPa and 54.40 MPa respectively at the c-PHDT/GO content = 0.75%. Moreover, the initial storage modulus increased by 28.4%, while the wear mass loss decreased by 17.8%. More importantly, the reinforcement by c-PHDT/GO was further enhanced as compared to GO/PF and p-PHDT/GO/PF composites, the impact strength of c-PHDT/GO/PF composite increased by 27.6% and 11.1%, the bending strength increased by 11.8% and 7.6%, the initial storage modulus increased by 16.2% and 4.2% and the mass loss due to wear decreased by 12.7% and 8.8%, respectively. Based on these results, we can conclude that the surface modification of GO by poly(hexanedithiol), which includes synergistic effect by c-PHDT and GO, improves the interfacial adhesion between GO and the resin matrix, thus reinforcing the composites.
文摘Epoxy resin based Unsaturated poly(ester-amide) resins (UPEAs) can be prepared by many methods but here these were prepared by reported method [1]. These UPEAs were then treated with acrylotl chloride to afford acrylated UPEAs resin (i.e. AUPEAs). Interacting blends of equal proportional AUPEAs and vinyl ester epoxy (VE) resin were prepared. APEAs and AUPEAs were characterized by elemental analysis, molecular weight determined by vapour pressure osmometer and by IR spectral study and by thermogravimetry. The curing of interacting blends was monitored on differential scanning calorimeter (DSC). Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized by thermogravimetry (TGA).
文摘The aim of the study was to evaluate the effect of adding acrylamide monomer （AAm） on the characterization, flexural strength, flexural modulus and thermal degradation temperature of poly（methyl methacrylate） （PMMA） denture-base resins. Specimens （n= 10） were fabricated from a conventional heat-activated QC-20 （Qc-） and a microwave heat-activated Acron MC （Ac-） PMMA resins. Powder/ liquid ratio followed the manufacturer＇s instructions for the control groups （Qc-c and Ac-c） and for the copolymer groups, the resins were prepared with 5% （-5）, 10% （- 10）, 15% （- 15） and 20% （-20） acrylamide contents, according to the molecular weight ratio, respectively. The flexural strength and flexural modulus were measured by a three-point bending test. The data obtained were statistically analyzed by Kruskal-Wallis test （a=O.05） to determine significant differences between the groups, The chemical structures of the resins were characterized by the nuclear magnetic resonance spectroscopy. Thermal stabilities were determined by thermogravimetric analysis （TGA） with a heating rate of 10 ~C.min-1 from 35 ~C to 600 ~C. Control groups from both acrylic resins showed the lowest flexural strength values. Qc-15 showed significant increase in the flexural strength when compared to Qc-c （P〈O.01）. Ac-10 and Ac-15 showed significance when compared to Ac-c （P〈O.01）. Acrylamide incorporation increased the elastic modulus in Qc-10, Qc-15 and Qc-20 when compared to Qc-c （P〈0.01）. Also significant increase was observed in Ac-10, Ac-15 and Ac-20 copolymer groups when compared to Ac-c （P〈0.01）. According to the 1H-nuclear magnetic resonance （NMR） results, acrylamide copolymerization was confirmed in the experimental groups. TGA results showed that the thermal stability of PMMA is increased by the insertion of AAm.
基金National Natural Science Foundation of China (No.29906008) and Natural Science Foundation of Shandong Province (No.Q99B15)
文摘By the reaction of poly(bromoacetyl styrene) (EBPS) with thiaurea (TU), a kind of novel chelating resin with heterocyaclic ring of sulfur and nitrogen, poly[4-(2-amino)thiazoleyl-4- vinylbenzene], was synthesized. Its structure was characterized by FTIR and elemental analysis. The factors which have influence on the reaction such as reaction time, solvents, and molar ratio of reactants were investigated.
文摘Three secondary amine terminated hyperbranched poly（ester-amine）s （defined as HPEA1, HPEA2 and HPEA3） were synthesized from piperazine （A2） and trimethylolpropane triacrylate （TMPTA, B3） at their molar ratios of 2.5：1, 2.25：1 and 2.0：1, respectively. The polymers were analyzed by 1H NMR, GPC, DSC and TGA. The results indicated that the ratio of secondary amine to tertiary amine and the content of secondary amine decreased, while the molecular weight, molecular weight distribution and glass transition temperature （Tg） increased from HPEA1 to HPEA3. Due to their reactive terminal groups and flexible chains, these polymers further reacted with an epoxy resin （E51） to form cured films under ambient conditions. With increasing the ratio between secondary amine groups and epoxy groups from 1：2 to 2：1, the gel content, film hardness and onset decomposing temperature of the cured samples increased. The good film performances should make the polymers as the components of non-solvent coating materials.
基金This work was supported by the National 973 project (G1999064707)
文摘Macroporous poly (vinyl acetate-co-triallyl isocyanurate) beads were prepared with suspension polymerization method. The copolymer beads were then transformed into poly (vinyl alcohol-co-triallyl isocyanurate) by ester exchange reaction. Aminocarboxylic acids were immobilized on the copolymer beads by the esterification of hydroxyl groups with diethyl-lenetriaminepentaacetic bisanhydride. The weak acid exchange capacities, specific surface areas and mean pore diameters of the resultant resin beads were measured.
