Preparation and Thermo-Responsive Properties of Poly(Oligo(Ethylene Glycol)Methacrylate)Copolymers with Hydroxy-Terminated Side Chain

Thermo-responsive random copolymers,poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-(ethylene glycol)methyl ether methacrylate)(P(EO_(2)-co-EO_(4/5)))and poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-ethylene glycol methacrylate(P(EO2-co-EG4/5))are synthesized via atom transfer radical polymerization(ATRP).The successful synthesis and the narrow polydispersity index(PDI)of two copolymers are indicated by 1H nuclear magnetic resonance(1H-NMR)and gel permeation chromatography(GPC)analyses.The transition behaviors of polymers in the aqueous solution are demonstrated by changes in turbidity and particle sizes.The transition behavior of P(EO2-co-EG4/5)is found to be milder than that of P(EO2-co-EO4/5).Moreover,the presence of hydrogen bonds without thermo-responsive properties established by hydroxyl groups in the end-side chain of P(EO_(2)-co-EG_(4/5))hinders the dehydration at the transition temperature(TT).Attenuated total reflection Fourier transform infrared spectrometry(ATR-FTIR)analysis along with contact angle measurements reveals that both P(EO_(2)-co-EO_(4/5))and P(EO_(2)-co-EG_(4/5))films undergo phase transitions from hydrophilicity to hydrophobicity above TT.By examining the swelling and collapse behaviors of the polymer films during phase transitions,it can be concluded that the end hydroxyl groups may establish hydrogen bonds with neighboring ether groups within the films,which remain intact throughout the phase transition process due to their strong bonding interactions.This leads to an increase in steric hindrance within swollen films thereby impeding dehydration processes and inducing hysteresis during phase transitions.

Polybutylacrylate/poly(methyl methacrylate) Core-Shell Elastic Particles as Epoxy Resin Toughener: Part I Design and Preparation

Polybutylacrylate (PBA)/poly(methyl methacrylate) (PMMA) core-shell elastic particles (CSEP), whose rubbery core diameter ranged from 0.08 μm to 1.38μm, were synthesized by using conventional emulsion polymerization, multi-step emulsion polymerization, and soapless polymerization. Allyl methacylate (ALMA) and ethylene glycol dimethacrylate (EGDMA) were selected as crosslinking reagents for core polymerization. Methacrylic acid (MAA) was used as functional co-monomer with methyl methacrylate as shell component. The content of vinyl groups in PBA rubbery core increased with the amount of crosslinking reagents. The core-shell ratio affected great on the morphology of the complex particles. Furthermore, the amounts of carboxyl on the surface of core-shell particles, copolymerized with acrylic acid, were determined by potentiometric titration. Results showed that methylacrylic acid was distributed mostly on the surface of particles.

SYNTHETIC STUDIES ON BLOOD COMPATIBLE BIOMATERIALSⅡ. SYNTHESIS OF POLY(ETHYLENEGLYCOL MONOMETHYLLTHER ) METHACRYLATE AND ANTITHROMBOGENICITY OF ITS COPOLYMERS

Poly （ethyleneglycol monomethylether） methacrylate （PEGMM）was synthesized by means of the reaction of methacrylyl chloride with sodium monomethylpolyethyleneglycoxide and was characterized by FTIR,;H-NMR,and ultraviolet spectrometries. A series of poly （vinyl alcohol）-graft-PEGMM （PVA-g-PEGMM ）and methyl methacrylate-PEGMM copolymer （PMMA-PEGMM） were prepared and tested for antithrombogenicity in vitro. The results indicate that the antithrombogenicity of the copolymers basically increases with the increasing of the DP of polyoxyethylene （POE） chain and tends to a plateau after the DP around 114,i.e. the long chain structure of POE is favourable to the antithrombogenicityof its copolymers ;moreover, the extent of the improvement ofantithrombogenicity also relates to the PEGMM content of the copolymers and the kind of the matrix that the POE chains are located on. These results are consistent with the anticipation of the hypothesis of maintaining proteins normal conformations for blood compatible bioraaterials.

Synthesis of Comblike Poly(methyl methacrylate) by Atom Transfer Radical Polymerization with Poly(ethyl 2-bromoacrylate) as Macroinitiator

Comblike poly(methyl methacrylate) was synthesized by atom transfer radical polymerization of methyl methacrylate with poly(ethyl 2-bromoacrylate) as a macroinitiator, which was prepared by conventional free radical polymerization of ethyl 2-bromoacrylate. The obtained comblike polymers were characterized by GPC and 1H NMR.

AN ATOMIC FORCE MICROSCOPY STUDY ON THE AGGREGATION OF ISOTACTIC POLY(METHYL METHACRYLATE)

Aggregation process of isotactic poly（methyl methacrylate） （i-PMMA） has been studied extensively for many years, and considerable progress has been made in both experimental and theoretical studies. They are, however, seldom sustained by real-space observations of the underlying morphology. In this paper, the aggregation process of i-PMMA in concentrated acetone solutions and the fractal structure of the resulting three-dimensional clusters were characterized on the basis of real-space AFM observations of their two-dimensional projection. It was found that spherical multiple-chain particles formed upon collapse and aggregation of the involving chains as a whole during quenching the solution to room temperature. By keeping the solution at room temperature, the initially formed particles stick together upon contact to form larger particles through reassembling very slowly. The succeeding collision of the enlarged spherical particles leads to the formation of small clusters. These newly formed small clusters grow when they meet with other clusters or single Brownian particles. This leads to the formation of large clusters with fractal dimension of 1.95 ± 0.05, which suggest a reaction-limited cluster aggregation of i-PMMA in a concentrated acetone solution. This is in accordance with the conclusion obtained by light scattering measurements.

PREPARATION OF POLY(METHYL METHACRYLATE)/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly（methyl methacrylate） （LDHs/PMMA） nanocomposite was prepared by in situ solution polymerization of methyl methacrylate （MMA） in the presence of 4-vinylbenzenesulfonate intercalated LDHs（MgAl-VBS LDHs）. MgAl-VBS LDHs was prepared by the ion exchange method, and the structure and composition of the MgAl-VBS LDHs were determined by X-ray diffraction （XRD）, infrared spectroscopy and elemental analysis. XRD and transmission electron microscopy （TEM） were employed to examine the structure of LDHs/PMMA nanocomposite. It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix. The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.

Effect of Low-Pressure Nitrogen DC Plasma Treatment on the Surface Properties of Biaxially Oriented Polypropylene, Poly (Methyl Methacrylate) and Polyvinyl Chloride Films

In this study, commercial biaxially oriented polypropylene （BOPP）, polyvinyl chlo- ride （PVC） and poly （methyl methacrylate） （PMMA） films were treated with nitrogen plasma over different exposure times in a Pyrex tube surrounded by a DC variable magnetic field. The chemi- cal changes that appeared on the surface of the samples were investigated using Fourier transform infrared （FT4R） spectroscopy and attenuated total reflectance Fourier transform infrared （ATR- FTIR） spectroscopy after treatment for 2 min, 4 min and 6 rain in a nitrogen plasma chamber. Effects of the plasma treatment on the surface topographies and contact angles of the untreated and plasma treated films were also analyzed by atomic force microscopy （AFM） and a contact angle measuring system. The results show that the plasma treated films become more hydrophilic with an enhanced wettability due to the formation of some new polar groups on the surface of the treated films. Moreover, at higher exposure times, the total surface energy in all treated films increased while a reduction in contact angle occurred. The behavior of surface roughness in each sample was completely different at higher exposure times.

Effect of Methyl Methacrylate– Acrylonitrile -Butadiene–Styrene (MABS) on the Mechanical and Thermal Properties of Poly (Methyl Methacrylate) (PMMA)-Fly Ash Cenospheres (FAC) Filled Composites

With the advent of plastics and the wide range of fillers that are available have made modifications as precise as the tailored resins themselves. To modify the properties of polymer either by using fillers or by preparation of polymer blends gives rise to new materials with tailored properties. More complex, three-component systems, obtained by the addition of polymeric modifier to polymer filled composites may be of interest. Use of Fly ash cenospheres is very attractive because it is inexpensive and its use can reduce the environmental pollution to a significant extent. In the present study, Poly (Methyl Methacrylate) (PMMA)-Fly ash cenospheres composites were prepared using extrusion followed by Injection molding. The effect of matrix modification with Methyl methacrylate– acrylonitrile -butadiene–styrene (MABS) on the performance of PMMA- Fly ash cenospheres compositions was also, studied. It was found that with the addition of Fly ash cenospheres particulate as filler in PMMA showed marginal reduction in Tensile Strength, % Elongation and Impact strength and improvement in Flexural Strength, Heat Deflection Temperature and Vicat Softening Point. Compared with PMMA-cenospheres composites, the notched Impact Strength of the PMMA/MABS/cenospheres composites showed marginal enhancement in values at higher loading of cenospheres. The optimum performances in mechanical and thermal properties were obtained when the ratio of MABS to cenospheres was 1:2.

Synthesis and Characterization of Novel Hybrid Poly(methyl methacrylate)/Iron Nanowires for Potential Hyperthemia Therapy

Externally applied magnetic fields have been used in this study to fabricate bamboo-like iron nanowires with or without a layer of Poly(methyl methacrylate) (PMMA). The hybrid PMMA/Fe nanowires were synthesized via hard X-ray synchrotron radiation polymerization with various treatment parameters. The results of XRD show that an oxide layer formed on the surface of the iron nanowires. The Fe2O3 and Fe3O4 phases coexist in the iron nanowires without X-ray irradiation. After X-ray irradiation, the Fe2O3 phase transformed into Fe3O4, which stabilized the iron nanowires. The results of XAS proved this phase transformation. TGA analysis confirmed the thermal properties and solid contents in these specimens. Their ferromagnetic behaviors were examined by magnetic hysteresis measurement, which indicated that the magnetic and structural properties of the nanowires can be manipulated by irradiation treatment. This may lead to a novel synthesis for iron nanowires that can be used in high thermal efficiency hyperthermia therapy.

Antibiotic-free antimicrobial poly (methyl methacrylate) bone cements:A state-of-the-art review

Prosthetic joint infection(PJI)is the most serious complication following total joint arthroplasty,this being because it is associated with,among other things,high morbidity and low quality of life,is difficult to prevent,and is very challenging to treat/manage.The many shortcomings of antibiotic-loaded poly(methyl methacrylate)(PMMA)bone cement(ALBC)as an agent for preventing and treating/managing PJI are well-known.One is that microorganisms responsible for most PJI cases,such as methicillin-resistant S.aureus,have developed or are developing resistance to gentamicin sulfate,which is the antibiotic in the vast majority of approved ALBC brands.This has led to many research efforts to develop cements that do not contain gentamicin(or,for that matter,any antibiotic)but demonstrate excellent antimicrobial efficacy.There is a sizeable body of literature on these socalled“antibiotic-free antimicrobial”PMMA bone cements(AFAMBCs).The present work is a comprehensive and critical review of this body.In addition to summaries of key trends in results of characterization studies of AFAMBCs,the attractive features and shortcomings of the literature are highlighted.Shortcomings provide motivation for future work,with some ideas being formulation of a new generation of AFAMBCs by,example,adding a nanostructured material and/or an extract from a natural product to the powder and/or liquid of the basis cement,respectively.

Kinetic Study of Atom Transfer Radical Polymerization of 2-(N,N-Dimethylamino)ethyl Methacrylate

A kinetic model was developed to describe the atom transfer radical polymerization (ATRP) of 2-(N,N-dimethylamino) ethyl methacrylate (DMAEMA). The model was based on a polymerization mechanism,which included the atom transfer equilibrium for primary radical, the propagation of growing polymer radical, and the atom transfer equilibrium for the growing polymer radical. An experiment was carried out to measure the conversion of monomer, the number-average molecular weight of polymer and molecular weight distribution for the ATRP process of DMAEMA. The experimental data were used to correlate the kinetic model and rate constants were obtained. The rate constants of activation and deactivation in the atom transfer equilibrium for primary radical are 1.0×10^4L·mol^-1·s^-1 and 0.04L·mol^-1·s^-1, respectively. The rate constant of the propagation of growing polymer radical is 8.50L·mol^-1·s^-1, and the rate constants of activation and deactivation in the atom transfer equilibrium for growing polymer radical are 0.045L·mol^-1·s^-1 and 1.2×10^5L·mol^-1·s^-1, respectively. The values of the rate constants represent the features of the ATRP process. The kinetic model was used to calculate the ATRP process of DMAEMA. The results show that the calculations agree well with the measurements.

STUDY ON METHANOLYSIS STABILITY OF OPTICALLY ACTIVE COPOLYMERS OF TRIPHENYLMETHYL METHACRYLATE AND METHYL METHACRYLATE

The methanolysis of poly(triphenylmethyl methacrylate) (PTrMA) and its copolymers P(TrMA-co-MMA), P(TrMA-b-MMA) has been studied in the presence of anhydrous methanol at 40 degrees C by electroconductometric method. It has been found that the methanolysis stability can be obviously improved for the copolymer, especially, the radom copolymer, P(TrMA-co-MMA).

PREPARATION AND MECHANICAL PROPERTIES OF POLY(METHYL METHACRYLATE)/ URETHANE ACRYLATE COPOLYMERS

The urethane acrylate(UA) was made of poly(tetramethylenc oxide), 4,4’-diphenylmethane diisocyanate, and 2-hydroxyethyl methacrylate. A series of poly(methyl methacrylate) / urethane acrylate copolymers was prepared by using a redox initiating system. The copolymers had cross linked structures and two-phase morphologies as indicated by the results of the dynamic mechanical measurement and swelling test.

MECHANICAL PROPERTIES OF CARBON/GLASS FIBER REINFORCED POLY(METHYL METHACRYLATE)COMPOSITES

Artificial bone, carbon/glass fiber reinforced PM-MA composites have been prepared by hot press moulding of pre-preg -which monofilments of CF and GF impregnated by MMA prepolymer. When the PMMA volume fraction in com-posites is 50% > theoretical and experimental results show that strength and modules of these hybrid composites are in accord with 'rule of mixture'. The tensile and flexure strength are the lowest when the raletive volume fraction of carbon fiber in rein-forcements is 50%,SEM examinations further explained re-sults.

Synthesis and characterization of poly(methyl methacrylate-co-polyhedral oligomeric silsesquioxane)hybrid nanocomposites

A novel poly（methyl methacrylate-co-polyhedral oligomeric silsesquioxane） hybrid nanocomposite was synthesized by free radical polymerization and characterized by 1H NMR, 29Si NMR, and TGA technologies. Compared with PMMA homopolymer, the nanocomposite has better thermal stability.

IONIC CONDUCTION IN BLENDS OF POLY(PYRIDINIUM ETHYL METHACRYLATE)AND COMB—LIKE COPOLYETHER

Poly(pyridinium ethyl methacrylate)was synthesized.The blends of polymeric solid anion conductor,P(PyEMAClO+4)/P(MEO_(16)—AM),were prepared. The temperature—dependence of both the conductivity and anionic mobility in the blends obey Arrhenius relationship,the transport of perchlorate anion being of thermal activation mechanism.Perchlorate anion is a free anion in the blends.

INTERACTION OF POLY(SODIUM SULFODECYL METHACRYLATE)WITH CETYLTRIMETHYL AMMONIUM BROMIDE IN AQUEOUS SOLUTION

The interaction of poly(sodium sulfodecyl methacrylate) (PSSM) with cetyltrimethyl ammonium bromide (CTAB)was studied. It was found that the precipitate formed from PSSM and CTAB will be dissolved by excessive CTAB, resultingin the appearance of two maxima of the solution viscosity at the molar ratio (CTAB/-SO_3^-) of≈ 0.68 and≈1.30,respectively. The first one is related closely to the aggregation of polymer chains via CTAB molecules and the second oneshould be ascribed to the formation of the mixed micelles comprising surfactant and the polymer's hydrophobic chains. Theeffect of NaCl on the viscosity, the transmittance of the aqueous solution and the solubility of oil-soluble dye (dimethyl yellow) in the mixed system were also investigated.

Photochemical kinetics for holographic grating formation in phenanthrenequinone doped poly (methyl methacrylate) photopolymer

The photochemical kinetics of phenanthrenequinone （PQ） doped poly （methyl methacrylate） photopolymer in holographic recording was studied theoretically and experimentally. The diffusion of PQ molecules during holographic recording was negligible because of its small diffusion coefficient at room temperature. A photochemical reaction kinetics model of PQ/PMMA was established. The analytical expressions for the temporal variations of transmittance and diffraction efficiency were derived. By fitting the experimental curves, some parameters related with the polymer components were obtained by the proposed model, which can be used to analyze the photochemical process and will be helpful to the optimization of material preparation.

Surface Perfluoroalkyl Chains Segregation: A Tool for Reducing Calcium Deposits in Medical Grade Poly(Methyl Methacrylate)

Intraocular lenses can be manufactured from a wide variety of polymers, but due to the lost cost associated with the use of Poly (methyl methacrylate) (PMMA), it is still the preferred material used in the developing countries. However, a major drawback to its use is the build-up of calcium containing deposits that are formed on the intraocular lens over a period of time. In an attempt to hinder this deposition, surface modification of medical grade PMMA has been carried out using perfluoroalkyl chain (1,2,4-trifluoro-3-(C10F21CH2O)-7-(N,N)-dimethylaminoacridine) segregation. The segregation was explored using a 1% 1,2,4-trifluoro-3-(C10F21CH2O)-7-(N,N)-dimethyla-minoacridine in two methods: film casting and spin-coating, a thin film onto preformed PMMA discs. Both methods were compared against control PMMA to determine which method provided the best hindrance against calcium containing deposits when immersed in a simulated aqueous humour solution. Characterisation of the surface using scanning electron microscopy coupled with energy;dispersive x-ray analysis indicated that the surface segregation of perfluoroalkyl chains had hindered calcification in both methods. This pleminary research shows promising results of employing perfluoroalkyl chains in the surface segregation of biomaterials that can be employed in intraocular lenses.