Removal of Dye Using Lignin-Based Biochar/Poly(ester amide urethane)Nanocomposites from Contaminated Wastewater

The pursuit of incorporating eco-friendly reinforcing agents in polymer composites has accentuated the exploration of various natural biomass-derived materials.The burgeoning environmental crisis spurred by the discharge of synthetic dyes into wastewater has catalyzed the search for effective and sustainable treatment technologies.Among the various sorbent materials explored,biochar,being renewable,has gained prominence due to its excellent adsorption properties and environmental sustainability.It has also emerged as a focal point for its potential to replace other conventional reinforcing agents,viz.,fumed silica,aluminum oxide,treated clays,etc.This study introduces a novel class of polymer nanocomposites comprising of lignin-based biochar particles and poly(ester amide urethane)matrix via a feasible method.The structural evaluation of these nanocomposites was accomplished using Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,and powder X-ray diffraction.The polymer nanocomposites exhibited superior mechanical properties with an increment in tensile strength factor by 45%in comparison to its pristine matrix,along with an excellent toughness value of 90.22 MJm^(−3)at a low loading amount of only 1 wt%.The composites showed excellent improvement in thermal properties with a sharp rise in the glass transition temperature(Tg)value from−28.15℃to 84℃,while also championing sustainability through inherent biodegradability attributes.Beyond their structural prowess,these polymer nanocomposites demonstrated excellent potential as adsorbents,displaying efficient removal of malachite green and tartrazine dyes from aqueous systems with a removal efficiency of 87.25%and 73.98%,respectively.The kinetics study revealed the pseudo second order model to be the precision tool to assess the dye removal study.Complementing this,the Langmuir adsorption isotherm provided a framework to assess the sorption features of the polymer nanocomposites.Overall,these renewable biochar integrated polymer matrices boast remarkable recovery capabilities up to seven cycles of usage with an excellent dye recovery percentage of 95.21%for the last cycle,thereby defining sustainability as well as economic feasibility.

Preparation and shape memory properties of TiO_2/PLCL biodegradable polymer nanocomposites

The preparation of TiO2/poly（L-lactide-co-ε-caprolactone）（PLCL） nanocomposites and their properties were reported.TiO2nanoparticles were surface modified by ring-opening polymerization of ε-caprolactone（ε-CL）.The resulting poly（ε-caprolactone）-grafted TiO2（g-TiO2） was characterized by Fourier transform infrared spectroscopy（FTIR）,thermogravimetric analysis（TGA） and transmission electron microscopy（TEM）.The g-TiO2can be uniformly dispersed in chloroform and the g-TiO2/PLCL nanocomposites were successfully fabricated through solvent-casting method.The effects of the content of g-TiO2nanoparticles on tensile properties and shape memory properties were investigated.A significant improvement in the tensile properties of the 5% g-TiO2/PLCL mass fraction nanocomposite is obtained：an increase of 113% in the tensile strength and an increase of 11% in the elongation at break over pure PLCL polymer.The g-TiO2/PLCL nanocomposites with a certain amount of g-TiO2content have better shape memory properties than pure PLCL polymer.The g-TiO2nanoparticles play an additional physical crosslinks which are contributed to improvement of the shape memory properties.

Poly(vinylidene fluoride)/Clay Nanocomposites by Melt Compounding

The crystalline structures, morphologies, and mechanical properties of poly（vinylidene fluoride）/clay nanocomposites were studied using X-ray diffraction（XRD）, transmission electron microscopy（TEM）, Fourier transform infrared spectroscopy（FTIR）, polarized optical microscopy（POM）, and tensile tests. The results of XRD and TEM show that organoclays are dispersed in the poly（vinylidene fluoride）（PVDF） matrix. A clay-induced crystal transformation from α-phase to β-phase of PVFD was confirmed by XRD and FTIR. Clay layers restricted the growth of spherulite. The tensile tests indicate that the tensile modulus and yield strength as well as the elongation at break decrease when clay is loaded.

Structure Characterization and Thermal Properties of PMMA/Montmorillonite Nanocomposites via Emulsion Polymerization

Montmorillonite(MMT) modified with sodium silicate can change the arrangement of its layers from edge-face and edge-edge to face-face. With the fine dispersion of the modified MMT in water,the cation-exchange reaction was carried out with cetyltrimethyl ammonium bromide(CTAB) to obtain organo-montmorillonite(OMMT). As OMMT was uniformly dispersed in methyl methacrylate(MMA) monomer,PMMA/OMMT nanocomposites were formed via a common emulsion polymerization. The products were extracted with hot acetone and characterized by FTIR,molecular weight,X-ray diffraction(XRD),transmission electron microscopy(TEM),DSC and TGA. These results show that most of the OMMT layers have been exfoliated,while the thermal stability is increased obviously. By means of FTIR spectral analysis,the ratios of the macromolecular radicals′ termination of disproportionation patterns to combination are increased with the addition of OMMT. This result further confirms the increase of the thermal degradation temperatures and glass transition temperatures of the PMMA/OMMT nanocomposites.

PREPARATION OF POLY(METHYL METHACRYLATE)/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly（methyl methacrylate） （LDHs/PMMA） nanocomposite was prepared by in situ solution polymerization of methyl methacrylate （MMA） in the presence of 4-vinylbenzenesulfonate intercalated LDHs（MgAl-VBS LDHs）. MgAl-VBS LDHs was prepared by the ion exchange method, and the structure and composition of the MgAl-VBS LDHs were determined by X-ray diffraction （XRD）, infrared spectroscopy and elemental analysis. XRD and transmission electron microscopy （TEM） were employed to examine the structure of LDHs/PMMA nanocomposite. It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix. The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.

Preparation of poly(propylene carbonate)/organophilic rectorite nanocomposites via direct melt intercalation

The completely degradable nanocomposites comprised of poly(propylene carbonate)(PPC) and organo-modified rectorite (OREC) were prepared by direct melt intercalation. The structure and mechanical properties of PPC/OREC nanocomposites were investigated. The wide-angle X-ray diffraction (WAXD) results show that the galleries distance of OREC is increased after PPC and OREC melt intercalation, which indicates that PPC molecular chain has intercalated into the layers of OREC. The PPC/OREC nanocomposites with lower OREC content show an increase in thermal decomposition temperature compared with pure PPC. The tensile strength and impact strength of PPC/OREC nanocomposites are improved. When the mass fraction of OREC is 4%, the tensile strength and impact strength of the PPC/OREC nanocomposite increase by 22.86% and 48.58% respectively, compared with pure PPC.

Synergism of Zinc Oxide/Organoclay-Loaded Poly(lactic acid) Hybrid Nanocomposite Plasticized by Triacetin for Sustainable Active Food Packaging

The synergistic effect of organoclay(OC)and zinc oxide(ZnO)nanoparticles on the crucial properties of poly(lactic acid)(PLA)nanocompositefilms was systematically investigated herein.After their incorporation into PLA via the solvent casting technique,the water vapor barrier property of the PLA/OC/ZnOfilm improved by a maximum of 86%compared to the neat PLAfilm without the deterioration of Young’s modulus or the tensile strength.Moreover,thefilm’s self-antibacterial activity against foodborne pathogens,including gram-negative(Escherichia coli,E.coli)and gram-positive(Staphylococcus aureus,S.aureus)bacteria,was enhanced by a max-imum of approximately 98–99%compared to the neat PLAfilm.Furthermore,SEM images revealed the homo-geneous dispersion of both nano-fillers in the PLA matrix.However,the thermal stability of thefilm decreased slightly after the addition of the OC and ZnO.Thefilm exhibited notable light barrier properties in the UV-Vis range.Moreover,the incorporation of a suitable biodegradable plasticizer significantly decreased the Tg and notably enhanced theflexibility of the nanocompositefilm by increasing the elongation at break approxi-mately 1.5-fold compared to that of the neat PLAfilm.This contributes to its feasibility as an active food packa-ging material.

Preparation and Properties of a New Type of Poly(butylene-terephthalate)with Layered Silicate Nanocomposites

In this paper, poly(butylene-terephthalate)-layered silicate of clay nanocomposites (NPBT) are reported. Their thermal properties, heat distortion temperature (HDT) and crystallization nucleation are investigated. NPBT samples have apparent viscosity over 0.85, HDT of 30℃ to 50℃ higher than that of poly (butylene-terephthalate) (PBT) for clay load from 1.0% to 10.0% (by mass), and higher capability to accommodate clay than other polymers. The nonisothermal crystallization experiments indicate that the better thermal degradation behavior and crystallization rate of NPBT are 50% higher than PBT, and its injection mould processing temperature is lowered from 110℃ to 55℃. NPBT samples are characterized by several techniques. X-ray shows an original clay interlayer distance enlarged from 1.0 nm to 2.5 nm, while both TBM and AFM indicate an average size from 30nm to lOOnm of exfoliated clay layers, and 3%(by mass) of particle agglomeration being phase separated from PBT matrix, which are factors on some mechanical properties decrease of NPBT. The disappearance of spherulitic morphology in NPBT resulted from layers nucleation is detected. Improving NPBT properties by treating clay with long chain organic reagent and controlling the way to load it is suggested.

Nanocellulose: Effect on Thermal, Structural, Molecular Mobility and Rheological Characteristics of Poly(Butylenes Adipate-Co-Butylene Terephthalate) Nanocomposites

The concern with environmental preservation is a very current and relevant topic. Regarding polymers, the search for potentially ecofriendly matters has been the subject of scientific research. In this context, this work aimed to study the effect of adding nanocellulose (nCE) with 1, 3, and 5 wt.% on poly(butylene adipate-co-butylene terephthalate) (PBAT). Thermal, structural, relaxometric, and rheological assessments were carried out. Quantitative evaluation of PBAT copolymer by high field NMR revealed 56.4 and 43.6 m.% of the butylene adipate and butylene terephthalate segments, respectively. WAXD measurement on the deconvoluted diffraction patterns identified that nCE was a mixing of Cellulose I and Cellulose II polymorph structures. At any composition, nanocellulose interfered with the PBAT crystallisation process. Also, a series of new PBAT crystallographic planes appeared as a function of nanocellulose content. PBAT hydrogen molecular relaxation varied randomly with nanocellulose content and had a strong effect on the hydrogen relaxation. PBAT cold crystallisation and melting temperatures (Tcc and Tm) were almost unchangeable. Although Tcc did not change during polymer solidification from PBAT molten state, the sample’s degree of crystallinity varied with composition through the transcrystallization phenomenon. Nanocomposite thermal stability decreased possibly owing to the catalytic action of sulfonated amorphous cellulose chains. For the sample with 3 wt.% of nanocellulose, the highest values of complex viscosity and storage modulus were achieved.

Synergistic Effect of Halloyosite Nanotube and Nanocellulose on Thermal and Mechanical Properties of Poly(Ethylmethacrylate-co-Acrylonitrile)Bionanocomposites

This work reports a comprehensive study on poly(Ethylmethacrylateco-Acrylonitrile)Poly(EMA-AN)nanocomposites reinforced with a hybrid mixture of nanoreiforcements based on nanocrystals of cellulose(NCC)(1 or 5%wt)and halloysite nanotubes(HNTs)(1 or 5%wt).The morphology,thermal and mechanical properties of these nanocomposites were characterized.Homogeneous dispersion of the nanofillers has been shown by scanning electron microscopy.A significant increase of the rubbery modulus and glass transition temperature were obtained upon filler addition,due to the reduction of mobility of the matrix macromolecular chains.On the other hand,compared with the neat Poly(EMAAN),the storage modulus of the nanocomposites increased by a factor 38 when adding 5 wt%NCC and by 17 for the same concentration of HNTs.mechanical properties of ternary nanocomposites were furthers increased resulting from a synergistic effect of these two nanofillers.

Preparation and Structure of Poly(ethylene-co-vinylacetate)/Montmorillonite Nanocomposites

Poly(ethylene-co-vinylacetate)/sodium montmorillonite(EVA/MMT)and Poly(ethylene-co-vinylacetate)/organophilic montmorillonite(EVA/o-MMT)nanocomposite were prepared by solid-state mixing.The morphology and structure of the composites were explored by scanning electron microscopy(SEM),wide-angle X-ray diffraction(WAXD),differential scanning calorimetry(DSC),and dynamic mechanical analysis(DMA).The results showed that the intercalated nanocomposite was successfully synthesized for EVA/o-MMT system,while in the EVA/MMT nanocomposite,MMT were poorly dispersed in the order of μm.An unexpected rubbery plateau modulus of EVA/o-MMT nanocomposite above melting point of EVA was explored by DMA.The possible origins of this high-temperature modulus were analyzed.

Synthesis and Characterization of Poly Anthranilic Acid Metal Nanocomposites

Intrinsically conducting polymer metal nanocomposites were synthesized by polymerising anthranilic acid (PANA) with metal salts like ferric chloride, Zinc oxide and Magnesium oxide by chemical oxidation method. Polyanthranilic acidiron nano composite (PANA-Fe), Polyanthranilic acid-Zinc nano composite(PANA-Zn) and Polyanthranilic acid-magnesium nano composite (PANA-Mg) synthesized were characterised by UV-Visible and FTIR studies. FTIR spectra of polymer-metal nano composites showed peaks in the region between 1690 cm-1 and 1490 cm-1 which corresponds to the deformation in different types of N-H bond. The participation of the -NH group in polymerization was confirmed by the appearance of a peak around 3431 cm-1. Cyclic voltammetric studies revealed the presence of an adherent polymer film on the glassy carbon electrode and showed redox behavior of the polymer metal nanocomposites. The XRD (XRay Diffraction) studies showed a rather more crystalline behaviour of the nano composites and the grain size was calculated using Scherrer’s formula and it was found to be in nano range. SEM (Scanning Electron Microscope) analysis showed a rather mixed crystalline and amorphous behavior. EDAX (Energy Dispersive X Ray Spectroscopy) confirms the incorporation of the metals iron, Zinc and Magnesium in the polymermetal nano composites. The inhibition efficiency of the polymermetal nano composites were calculated for stainless steel in acidic environment using elec-trochemical impedance spectroscopy (EIS) and polarization (Tafel) studies and the prepared PANA-Fe and PANA-Zn nano composites showed effective anti-corrosive behavior on stainless steel in acid medium.

Poly (L-lactide-co-e-caprolactone)/Functionalized CNTs Nanocomposite,Thermal and Mechanical Properties

Multiwalled carbon nanotubes(MWCNTs) grafted with poly(L-lactide-e-caprolactone)(PCLA) were synthesized by ring opening polymerization reaction and used as a reinforcement for neat PCLA.Scanning electron microscopy(SEM) revealed that the applied tensile load on the composite was transferred to the MWNT-OH-g-PCLA,loading to a strain failure of the MWCNTs rather than an adhesive failure between the MWCNTs and the matrix.

Preparation and Characterization of Titania-grafted Poly(styrene-divinybenzene) Nanocomposite Microspheres

Titania-grafted poly（styrene-divinylbenzene）（TiO2/PSt-DVB） nanocomposite microspheres were prepared by an open-ring reaction and radical grafting copolymerization method. The TiO2 nanoparticles were first modified by attachment of epoxy groups to their surfaces to provide reactive groups that could covalently bond to the polymer （PSt-DVB） microspheres. The nanocomposite obtained was characterized by FTIR, SEM, XRD, and TGA analyses as well as UV-Vis spectrophotometry. The results indicated that the TiO2 nanoparticles were uniformly grafted onto the surface of the polymer microsphere producing grain sizes of about 5―10 μm. The modified TiO2 showed better UV absorbing property than the unmodified form, and the nanocomposite also retained the same UV absorbing property as the free modified TiO2 nanoparticle.

Structures and Mechanical Properties of PVC/Na^+- Montmorillonite Nanocomposites

Poly (vinyl chloride)/Na+-montmorillonite (PVC/MMT) nanocomposites with different MMT contents were prepared via melt blending. Wide-angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM) were used to characterize the structures. Effects of MMT content on the mechanical properties were also studied. It is found that PVC molecular chains can intercalate into the gallery of MMT layers during melt blending process, the stiffness and toughness of the composites are improved simultaneously within 0.5~7wt% MMT content, and the transparency and mechanical properties decrease as MMT content further increases.

Synthesis of Metal/Poly(diphenylsilylenemethylene) Nanocomposite Thin Films by Pulsed Laser Ablation

A new technique to synthesize poly（diphenylsilylenemethylene） （PDPhSM） matrix nanocomposite thin films containing metal nanoparticles such as Ni, AI, Zn, and W produced by pulsed laser ablation has been developed. First, 1,1,3,3-tetra- phenyl-1,3-disilacyclobutane （TPDC） films were deposited on 4 cm2 silicon substrates cut from c-Si wafers by conventional vacuum evaporation under a pressure of 4.0×10^-3 Pa; then metal nanoparticles were deposited onto the TPDC films by pulsed laser ablation; finally the TPDC films with metal nanoparticles were heated in an electric furnace in an air atmosphere at 553 K for 10 rain to induce ring-opening polymerization of TPDC. The results indicate that it is easy to synthesize metal/ PDPhSM nanocomposite thin films by pulsed laser ablation. The morphologies and size of metal nanoparticles are closely related to the kinds of metal. Also, the polymerization efficiency depends on the kinds of metal nanoparticles deposited on the TPDC monomer films by pulsed laser ablation. In addition, The laser ablated metal nanoparticles penetrate into the TPDC monomer films during pulsed laser ablation while the DC sputtered metal nanoparticles just lay on the surface of TPDC films.

In-Situ Synthesized Myoglobin Imprinted Poly(N-Isopropylacrylamide)/Silica Nanocomposite Gels by Using the Molecular Imprinting Method

Temperature sensitive imprinted poly(N-isopropylacrylamide) nanocomposite gels were syntheses via in-situ, free radical crosslinking polymerization of corresponding monomer in nano-sized silica and five different concentrations of myoglobin solution by using the molecular imprinting method. Mb adsorption from five different concentrations of Mb solutions was investigated by two types of nanocomposite gel systems prepared by non-imprinted and imprinted methods. Nanocomposite gels imprinted with Mb showed higher adsorption capacity and specificity for Mb than nanocomposite gels prepared by the usual procedure. The highest Mb adsorption was observed via the imprinted nanocomposite gels with 12.5% Mb. In addition, selectivity studies were also performed by using two reference molecules as fibrinogen and hemoglobin. The imprinted nanocomposite gels had higher adsorption capacity for Mb than the non-imprinted gels and also exhibited good selectivity for Mb and high adsorption rate depending on the number of Mb sized cavities.

Improving physical properties of poly(vinyl alcohol)/montmorillonite nanocomposite hydrogels via the Hofmeister effect

Hydrogel is a kind of three-dimensional crosslinked polymer material with high moisture content.However,due to the network defects of polymer gels,traditional hydrogels are usually brittle and fragile,which limits their practical applications.Herein,we present a Hofmeister effect-aided facile strategy to prepare high-performance poly(vinyl alcohol)/montmorillonite nanocomposite hydrogels.Layered montmorillonite nanosheets can not only serve as crosslinking agents to enhance the mechanical properties of the hydrogel but also promote the ion conduction.More importantly,based on the Hofmeister effect,the presence of(NH_(4))_(2)SO_(4)can endow nanocomposite hydrogels with excellent mechanical properties by affecting PVA chains'aggregation state and crystallinity.As a result,the as-prepared nanocomposite hydrogels possess unique physical properties,including robust mechanical and electrical properties.The as-prepared hydrogels can be further assembled into a high-performance flexible sensor,which can sensitively detect large-scale and small-scale human activities.The simple design concept of this work is believed to provide a new prospect for developing robust nanocomposite hydrogels and flexible devices in the future.

Effect of the Addiction of Metal Oxide Nanoparticles on the Physical, Chemical and Thermal Properties of PVA Based Nanocomposites

In this study, poly(vinyl alcohol) (PVA)-based nanocomposites consisting of metallic oxide nanoparticles (TiO2, ZnO, ZrO2) were obtained from an aqueous solution of 7% PVA, in order to compare the microstructural, and physical properties of bionanocomposite films reinforced with various loading contents (0.1%, 0.2% and 0.3% w/w). They were evaluated regarding their molecular toughness through Nuclear Magnetic Resonance (NMR), regarding their chemical structural through Fourier Transform Infrared Spectroscopy (FTIR), regarding their crystallinity throught X-ray Diffraction (XRD), and regarding termal properties through Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). The NMR results showed that the smallest concentrations of these oxides have a tendency to disperse better in the polymeric matrix, improving the structural toughness. Besides, changes in the termal resistance of the material were found with the use of TGA and DSC.