AIM: To establish the potential of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) as a material for tendon repair. METHODS: The biocompatibility of PHBHHx with both rat tenocytes (rT) and human mesenchymal ste...AIM: To establish the potential of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) as a material for tendon repair. METHODS: The biocompatibility of PHBHHx with both rat tenocytes (rT) and human mesenchymal stem cells (hMSC) was explored by monitoring adhesive characteristics on films of varying weight/volume ratios coupled to a culture atmosphere of either 21% O2 (air) or 2% O2 (physiological normoxia). The diameter and stiffness of PHBHHx films was established using optical coherence tomography and mechanical testing, respectively. RESULTS: Film thickness correlated directly with weight/volume PHBHHx (r2 = 0.9473) ranging from 0.1 mm (0.8% weight/volume) to 0.19 mm (2.4% weight/volume). Film stiffness on the other hand displayed a biphasic response which increased rapidly at values > 1.6% weight/volume. Optimal cell attachment of rT required films of ≥ 1.6% and ≥ 2.0% weight/volume PHBHHx in 2% O2 and 21% O2 respectively. A qualitative adhesion increase was noted for hMSC in films ≥ 1.2% weight/volume, becoming significant at 2% weight/volume in 2% O2. An increase in cell adhesion was also noted with ≥ 2% weight/volume PHBHHx in 21% O2. Cell migration into films was not observed. CONCLUSION: This evaluation demonstrates that PHBHHx is a suitable polymer for future cell/polymer replacement strategies in tendon repair.展开更多
The miscibility and crystallization of solution casting biodegradable poly（3-hydroxybuty- rate）/poly（ethylene succinate） （PHB/PES） blends was investigated by differential scanning calorimetry, rheology, and opti...The miscibility and crystallization of solution casting biodegradable poly（3-hydroxybuty- rate）/poly（ethylene succinate） （PHB/PES） blends was investigated by differential scanning calorimetry, rheology, and optical microscopy. The blends showed two glass transition temperatures and a depression of melting temperature of PHB with compositions in phase diagram, which indicated that the blend was partially miscible. The morphology observation supported this result. It was found that the PHB and PES can crystallize simultaneously or upon stepwise depending on the crystallization temperatures and compositions. The spherulite growth rate of PHB increased with increasing of PES content. The influence of compositions on the spherulitic growth rate for the partially miscible polymer blends was discussed.展开更多
A novel soluble π-conjugated polymer, poly [（3-acetylpyrrole-2, 5-diyl） p-（N, N-dimethylamino） azobenzylidene] （PAPDMAABE）, was synthesized by condensation of 3-acetylpyrrole with 4-aldehyde-4＇-dimethylaminoaz...A novel soluble π-conjugated polymer, poly [（3-acetylpyrrole-2, 5-diyl） p-（N, N-dimethylamino） azobenzylidene] （PAPDMAABE）, was synthesized by condensation of 3-acetylpyrrole with 4-aldehyde-4＇-dimethylaminoazobenzene （ADMAA）. The chemical structure of PAPDMAABE was characterized by Fourier transform infrared spectroscopy （FTIR）, ^1H-NMR, and UV-Vis-NIR spectra. Transmission electron microscope （TEM） analysis for PAPDMAABE indicates that part of PAPDMAABE is in crystal state, due to the short-range order of the polymer. Thermogravimetric analysis （TGA） curve shows that the polymer has good thermal stability and its decomposition temperature is 248℃. The optical band gap of PAPDMAABE obtained from the optical absorption spectrum is about 1.73 eV. The resonant third-order nonlinear optical property of PAPDMAABE at 532 nm was studied using degenerate four-wave mixing （DFWM） technique. The resonant third-order nonlinear optical susceptibility of the polymer is about 7.48×10^-8 esu.展开更多
Exfoliation of bulk graphitic carbon nitride(g‐C3N4)into two‐dimensional(2D)nanosheets is one of the effective strategies to improve its photocatalytic properties so that the 2D g‐C3N4 nanosheets(CN)have larger spe...Exfoliation of bulk graphitic carbon nitride(g‐C3N4)into two‐dimensional(2D)nanosheets is one of the effective strategies to improve its photocatalytic properties so that the 2D g‐C3N4 nanosheets(CN)have larger specific surface areas and more reaction sites.In addition,poly‐o‐phenylenediamine(PoPD)can improve the electrical conductivity and photocatalytic activity of semiconductor materials.Here,the novel efficient composite PoPD/AgCl/g‐C3N4 nanosheets was first synthesized by a precipitation reaction and the photoinitiated polymerization approach.The obtained photocatalysts have larger specific surface areas and could achieve better visible‐light response.However,silver chloride(AgCl)is susceptible to agglomeration and photocorrosion.The PoPD/AgCl/CN composite exhibits an extremely high photocurrent density,which is three times that of CN.Obviously enhanced photocatalytic activities of PoPD/AgCl/g‐C3N4 are revealed through the photodegradation of tetracycline.The stability of PoPD/AgCl/CN is demonstrated based on four cycles of experiments that reveal that the degradation rate only decreases slightly.Furthermore,.O2^-and h+are the main active species,which are confirmed through a trapping experiment and ESR spin‐trap technique.Therefore,the prepared PoPD/AgCl/CN can be considered as a stable photocatalyst,in which PoPD is added as a charge carrier and acts a photosensitive protective layer on the surface of the AgCl particles.This provides a new technology for preparing highly stable composite photocatalysts that can effectively deal with environmental issues.展开更多
Photochemical reactions of poly(3-butoxythiophene-2,5-diyl) with chloroform under irradiation with light were studied. The reactions were separately carried out under air, oxygen, and nitrogen. The obtained results sh...Photochemical reactions of poly(3-butoxythiophene-2,5-diyl) with chloroform under irradiation with light were studied. The reactions were separately carried out under air, oxygen, and nitrogen. The obtained results showed that this reaction belongs to the pseudo-first-order reaction with a rate constant kobs of 1.4×10?5 s?1 at room temperature. The presence or absence of air, oxygen, and nitrogen did not have obvious effects on the reaction rate under irradiation with light.展开更多
Poly (3-hydroxy alkanoate)s, PHAs, have been very attractive as biomaterials due to their biodegradability and biocompatibility. These hydrophobic natural polyesters, PHAs, need to have hydrophilic character particula...Poly (3-hydroxy alkanoate)s, PHAs, have been very attractive as biomaterials due to their biodegradability and biocompatibility. These hydrophobic natural polyesters, PHAs, need to have hydrophilic character particularly for drug delivery systems. In this manner, poly (ethylene glycol) (PEG) and hydrophilic functional groups such as amine, hydroxyl, carboxyl and sulfonic acid have been introduced into the PHAs in order to obtain amphiphilic polymers. This review involves in the synthesis and characterization of the amphiphilic PHAs.展开更多
In this work,hydrothermal method was used to prepare the CaZnAl-CO3 ternary layered double hydroxides(CaZnAl-CO3-LDHs)with various Ca/Zn/Al molar ratios,which were characterized by X-ray diffraction(XRD),Fourier trans...In this work,hydrothermal method was used to prepare the CaZnAl-CO3 ternary layered double hydroxides(CaZnAl-CO3-LDHs)with various Ca/Zn/Al molar ratios,which were characterized by X-ray diffraction(XRD),Fourier transform infrared spectroscope(FT-IR)and scanning electron microscopy(SEM)techniques.The obtained results demonstrate that the samples were well-crystallized and flake-structured.The CaZnAl-CO3-LDHs used alone for thermal stability of poly(vinyl chloride)(PVC)resin,with different Ca/Zn/Al molar ratios and varying additive amounts,were investigated through the tests such as static thermal aging,mass loss and congo red,respectively.The optimum Ca/Zn/Al molar ratio and additive amount were 3.6:0.4:2 and 5 phr(parts per hundred PVC resin),respectively.In addition,the synergistic effects of Ca3.6Zn0.4Al2-CO3-LDHs and CaSt2 were discussed in detail,showing better thermal stability compared with Ca3.6Zn0.4Al2-CO3-LDHs used alone,and the optimum additive amounts of Ca3.6Zn0.4Al2-LDHs and CaSt2 were 6 and 1.0 phr,respectively.展开更多
Mesenchymal stem cells(MSCs)are stromal multipotent stem cells that can differentiate into multiple cell types,including fibroblasts,osteoblasts,chondrocytes,adipocytes,and myoblasts,thus allowing them to contribute t...Mesenchymal stem cells(MSCs)are stromal multipotent stem cells that can differentiate into multiple cell types,including fibroblasts,osteoblasts,chondrocytes,adipocytes,and myoblasts,thus allowing them to contribute to the regeneration of various tissues,especially bone tissue.MSCs are now considered one of the most promising cell types in the field of tissue engineering.Traditional petri dish-based culture of MSCs generate heterogeneity,which leads to inconsistent efficacy of MSC applications.Biodegradable and biocompatible polymers,poly(3-hydroxyalkanoates)(PHAs),are actively used for the manufacture of scaffolds that serve as carriers for MSC growth.The growth and differentiation of MSCs grown on PHA scaffolds depend on the physicochemical properties of the polymers,the 3D and surface microstructure of the scaffolds,and the biological activity of PHAs,which was discovered in a series of investigations.The mechanisms of the biological activity of PHAs in relation to MSCs remain insufficiently studied.We suggest that this effect on MSCs could be associated with the natural properties of bacteria-derived PHAs,especially the most widespread representative poly(3-hydroxybutyrate)(PHB).This biopolymer is present in the bacteria of mammalian microbiota,whereas endogenous poly(3-hydroxybutyrate)is found in mammalian tissues.The possible association of PHA effects on MSCs with various biological functions of poly(3-hydroxybutyrate)in bacteria and eukaryotes,including in humans,is discussed in this paper.展开更多
Poly-3-hydroxybutyrate （PHB） can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and...Poly-3-hydroxybutyrate （PHB） can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and plentiful not only as natural gas, but also as biogas. Methanol can also maintain methanotrophic activity in some conditions. The methanotrophic strain Methylosinus trichosporium IMV3011 can accumulate PHB with methane and methanol in a brief nonsterile process. Liquid methanol （0.1%） was added to improve the oxidization of methane. The studies were carried out using shake flasks. Cultivation was performed in two stages： a continuous growth phase and a PHB accumulation phase under the conditions short of essential nutrients （ammonium, nitrate, phosphorus, copper, iron （Ⅲ）, magnesium or ethylenediamine tetraacetate （EDTA）） in batch culture. It was found that the most suitable growth time for the cell is 144 h. Then an optimized culture condition for second stage was determined, in which the PHB concentration could be much increased to 0.6 g/L. In order to increase PHB content, citric acid was added as an inhibitor of tricarboxylic acid cycle （TCA）. It was found that citric acid is favorable for the PHB accumulation, and the PHB yield was increased to 40% （w/w） from the initial yield of 12% （w/w） after nutrient deficiency cultivation. The PHB produced is of very high quality with molecular weight up to 1.5 × 10^6Da.展开更多
A novel soluble π-conjugated polymer, poly[(3-octanoylpyrrole-2,5-diyl)-p-(N,N-dimethylamino)benzylidene](POPDMABE), was synthesized firstly by the condensation of 3-octanoylpyrrole with para-dimethylaminobenzaldehyd...A novel soluble π-conjugated polymer, poly[(3-octanoylpyrrole-2,5-diyl)-p-(N,N-dimethylamino)benzylidene](POPDMABE), was synthesized firstly by the condensation of 3-octanoylpyrrole with para-dimethylaminobenzaldehyde. The chemical structure of the polymer was characterized by FTIR and 1H NMR spectrometries. The polymer is a potential nonlinear optical(NLO) material. According to the function of optical forbidden band gap(E_g) and photon energy(hν), the optical forbidden band gaps of the polymer before and after ion implantation were calculated. The resonant third-order nonlinear optical properties of POPDMABE before and after ion implantation were also studied by using the degenerate four-wave mixing(DFWM) technique at 532 nm. When the energy is 25 keV and the dose is 2.2×10 17 ions/cm 2, the {polymer′s} optical forbidden band gap is about 1.63 eV which is smaller than that of the non-implanted sample(1.98 eV) and the resonant third-order NLO susceptibility of POPDMABE is about 4.3×10 -7 esu, 1 order of magnitude higher than that of the non-implanted sample(4.1×10 -8 esu). The results show that nitrogen ion implantation is an effective method to improve the resonant third-order NLO property of the polymer.展开更多
基金Supported by EPSRC Doctoral Training Centre in Regenerative Medicine and the HYANJI Scaffold Project (European Commission Framework 7 program)
文摘AIM: To establish the potential of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) as a material for tendon repair. METHODS: The biocompatibility of PHBHHx with both rat tenocytes (rT) and human mesenchymal stem cells (hMSC) was explored by monitoring adhesive characteristics on films of varying weight/volume ratios coupled to a culture atmosphere of either 21% O2 (air) or 2% O2 (physiological normoxia). The diameter and stiffness of PHBHHx films was established using optical coherence tomography and mechanical testing, respectively. RESULTS: Film thickness correlated directly with weight/volume PHBHHx (r2 = 0.9473) ranging from 0.1 mm (0.8% weight/volume) to 0.19 mm (2.4% weight/volume). Film stiffness on the other hand displayed a biphasic response which increased rapidly at values > 1.6% weight/volume. Optimal cell attachment of rT required films of ≥ 1.6% and ≥ 2.0% weight/volume PHBHHx in 2% O2 and 21% O2 respectively. A qualitative adhesion increase was noted for hMSC in films ≥ 1.2% weight/volume, becoming significant at 2% weight/volume in 2% O2. An increase in cell adhesion was also noted with ≥ 2% weight/volume PHBHHx in 21% O2. Cell migration into films was not observed. CONCLUSION: This evaluation demonstrates that PHBHHx is a suitable polymer for future cell/polymer replacement strategies in tendon repair.
基金ACKNOWLEDGMENT This work was supported by the Key Science Foundation of Education Ministry of China and the Anhui Science Foundation.
文摘The miscibility and crystallization of solution casting biodegradable poly（3-hydroxybuty- rate）/poly（ethylene succinate） （PHB/PES） blends was investigated by differential scanning calorimetry, rheology, and optical microscopy. The blends showed two glass transition temperatures and a depression of melting temperature of PHB with compositions in phase diagram, which indicated that the blend was partially miscible. The morphology observation supported this result. It was found that the PHB and PES can crystallize simultaneously or upon stepwise depending on the crystallization temperatures and compositions. The spherulite growth rate of PHB increased with increasing of PES content. The influence of compositions on the spherulitic growth rate for the partially miscible polymer blends was discussed.
基金the National Natural Science Foundation of China for financial support of this work(No.60277002).
文摘A novel soluble π-conjugated polymer, poly [（3-acetylpyrrole-2, 5-diyl） p-（N, N-dimethylamino） azobenzylidene] （PAPDMAABE）, was synthesized by condensation of 3-acetylpyrrole with 4-aldehyde-4＇-dimethylaminoazobenzene （ADMAA）. The chemical structure of PAPDMAABE was characterized by Fourier transform infrared spectroscopy （FTIR）, ^1H-NMR, and UV-Vis-NIR spectra. Transmission electron microscope （TEM） analysis for PAPDMAABE indicates that part of PAPDMAABE is in crystal state, due to the short-range order of the polymer. Thermogravimetric analysis （TGA） curve shows that the polymer has good thermal stability and its decomposition temperature is 248℃. The optical band gap of PAPDMAABE obtained from the optical absorption spectrum is about 1.73 eV. The resonant third-order nonlinear optical property of PAPDMAABE at 532 nm was studied using degenerate four-wave mixing （DFWM） technique. The resonant third-order nonlinear optical susceptibility of the polymer is about 7.48×10^-8 esu.
基金supported by the National Natural Science Foundation of China(21576125,21776117)the China Postdoctoral Science Foundation(2017M611716,2017M611734)+1 种基金the Six talent peaks project of Jiangsu Province(XCL-014)the Zhenjiang Science&Technology Program(SH2016012)~~
文摘Exfoliation of bulk graphitic carbon nitride(g‐C3N4)into two‐dimensional(2D)nanosheets is one of the effective strategies to improve its photocatalytic properties so that the 2D g‐C3N4 nanosheets(CN)have larger specific surface areas and more reaction sites.In addition,poly‐o‐phenylenediamine(PoPD)can improve the electrical conductivity and photocatalytic activity of semiconductor materials.Here,the novel efficient composite PoPD/AgCl/g‐C3N4 nanosheets was first synthesized by a precipitation reaction and the photoinitiated polymerization approach.The obtained photocatalysts have larger specific surface areas and could achieve better visible‐light response.However,silver chloride(AgCl)is susceptible to agglomeration and photocorrosion.The PoPD/AgCl/CN composite exhibits an extremely high photocurrent density,which is three times that of CN.Obviously enhanced photocatalytic activities of PoPD/AgCl/g‐C3N4 are revealed through the photodegradation of tetracycline.The stability of PoPD/AgCl/CN is demonstrated based on four cycles of experiments that reveal that the degradation rate only decreases slightly.Furthermore,.O2^-and h+are the main active species,which are confirmed through a trapping experiment and ESR spin‐trap technique.Therefore,the prepared PoPD/AgCl/CN can be considered as a stable photocatalyst,in which PoPD is added as a charge carrier and acts a photosensitive protective layer on the surface of the AgCl particles.This provides a new technology for preparing highly stable composite photocatalysts that can effectively deal with environmental issues.
文摘Photochemical reactions of poly(3-butoxythiophene-2,5-diyl) with chloroform under irradiation with light were studied. The reactions were separately carried out under air, oxygen, and nitrogen. The obtained results showed that this reaction belongs to the pseudo-first-order reaction with a rate constant kobs of 1.4×10?5 s?1 at room temperature. The presence or absence of air, oxygen, and nitrogen did not have obvious effects on the reaction rate under irradiation with light.
文摘Poly (3-hydroxy alkanoate)s, PHAs, have been very attractive as biomaterials due to their biodegradability and biocompatibility. These hydrophobic natural polyesters, PHAs, need to have hydrophilic character particularly for drug delivery systems. In this manner, poly (ethylene glycol) (PEG) and hydrophilic functional groups such as amine, hydroxyl, carboxyl and sulfonic acid have been introduced into the PHAs in order to obtain amphiphilic polymers. This review involves in the synthesis and characterization of the amphiphilic PHAs.
基金Project(21371180)supported by the National Natural Science Foundation of ChinaProject(K1303015-11)supported by the Science and Technology Project of Changsha City,ChinaProject(20130162110018)supported by the Specialized Research Fund for the Doctoral Program of Higher Education,China。
文摘In this work,hydrothermal method was used to prepare the CaZnAl-CO3 ternary layered double hydroxides(CaZnAl-CO3-LDHs)with various Ca/Zn/Al molar ratios,which were characterized by X-ray diffraction(XRD),Fourier transform infrared spectroscope(FT-IR)and scanning electron microscopy(SEM)techniques.The obtained results demonstrate that the samples were well-crystallized and flake-structured.The CaZnAl-CO3-LDHs used alone for thermal stability of poly(vinyl chloride)(PVC)resin,with different Ca/Zn/Al molar ratios and varying additive amounts,were investigated through the tests such as static thermal aging,mass loss and congo red,respectively.The optimum Ca/Zn/Al molar ratio and additive amount were 3.6:0.4:2 and 5 phr(parts per hundred PVC resin),respectively.In addition,the synergistic effects of Ca3.6Zn0.4Al2-CO3-LDHs and CaSt2 were discussed in detail,showing better thermal stability compared with Ca3.6Zn0.4Al2-CO3-LDHs used alone,and the optimum additive amounts of Ca3.6Zn0.4Al2-LDHs and CaSt2 were 6 and 1.0 phr,respectively.
基金Supported by Russian Science Foundation,No.17-74-20104
文摘Mesenchymal stem cells(MSCs)are stromal multipotent stem cells that can differentiate into multiple cell types,including fibroblasts,osteoblasts,chondrocytes,adipocytes,and myoblasts,thus allowing them to contribute to the regeneration of various tissues,especially bone tissue.MSCs are now considered one of the most promising cell types in the field of tissue engineering.Traditional petri dish-based culture of MSCs generate heterogeneity,which leads to inconsistent efficacy of MSC applications.Biodegradable and biocompatible polymers,poly(3-hydroxyalkanoates)(PHAs),are actively used for the manufacture of scaffolds that serve as carriers for MSC growth.The growth and differentiation of MSCs grown on PHA scaffolds depend on the physicochemical properties of the polymers,the 3D and surface microstructure of the scaffolds,and the biological activity of PHAs,which was discovered in a series of investigations.The mechanisms of the biological activity of PHAs in relation to MSCs remain insufficiently studied.We suggest that this effect on MSCs could be associated with the natural properties of bacteria-derived PHAs,especially the most widespread representative poly(3-hydroxybutyrate)(PHB).This biopolymer is present in the bacteria of mammalian microbiota,whereas endogenous poly(3-hydroxybutyrate)is found in mammalian tissues.The possible association of PHA effects on MSCs with various biological functions of poly(3-hydroxybutyrate)in bacteria and eukaryotes,including in humans,is discussed in this paper.
基金New Century Excellent Talents in University of China(NCET-05-0358)the National Natural Science Foundation of China(20625308)
文摘Poly-3-hydroxybutyrate （PHB） can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and plentiful not only as natural gas, but also as biogas. Methanol can also maintain methanotrophic activity in some conditions. The methanotrophic strain Methylosinus trichosporium IMV3011 can accumulate PHB with methane and methanol in a brief nonsterile process. Liquid methanol （0.1%） was added to improve the oxidization of methane. The studies were carried out using shake flasks. Cultivation was performed in two stages： a continuous growth phase and a PHB accumulation phase under the conditions short of essential nutrients （ammonium, nitrate, phosphorus, copper, iron （Ⅲ）, magnesium or ethylenediamine tetraacetate （EDTA）） in batch culture. It was found that the most suitable growth time for the cell is 144 h. Then an optimized culture condition for second stage was determined, in which the PHB concentration could be much increased to 0.6 g/L. In order to increase PHB content, citric acid was added as an inhibitor of tricarboxylic acid cycle （TCA）. It was found that citric acid is favorable for the PHB accumulation, and the PHB yield was increased to 40% （w/w） from the initial yield of 12% （w/w） after nutrient deficiency cultivation. The PHB produced is of very high quality with molecular weight up to 1.5 × 10^6Da.
文摘A novel soluble π-conjugated polymer, poly[(3-octanoylpyrrole-2,5-diyl)-p-(N,N-dimethylamino)benzylidene](POPDMABE), was synthesized firstly by the condensation of 3-octanoylpyrrole with para-dimethylaminobenzaldehyde. The chemical structure of the polymer was characterized by FTIR and 1H NMR spectrometries. The polymer is a potential nonlinear optical(NLO) material. According to the function of optical forbidden band gap(E_g) and photon energy(hν), the optical forbidden band gaps of the polymer before and after ion implantation were calculated. The resonant third-order nonlinear optical properties of POPDMABE before and after ion implantation were also studied by using the degenerate four-wave mixing(DFWM) technique at 532 nm. When the energy is 25 keV and the dose is 2.2×10 17 ions/cm 2, the {polymer′s} optical forbidden band gap is about 1.63 eV which is smaller than that of the non-implanted sample(1.98 eV) and the resonant third-order NLO susceptibility of POPDMABE is about 4.3×10 -7 esu, 1 order of magnitude higher than that of the non-implanted sample(4.1×10 -8 esu). The results show that nitrogen ion implantation is an effective method to improve the resonant third-order NLO property of the polymer.
