ROLE AND IMPORTANCE OF RADIUS OF GYRATION OF CHAINS IN THE MELT IN THE CRYSTALIZATION OF POLY(1-BUTENE)

Crystallization in polymer systems actually is a process that transfers the entangled melts into a semi-crystalline layered structure. Whether or not a chain disentangles may result in different crystallization mechanism. When compared to the crystal thickness (d(c)), the volume occupied by the chain in the melts i.e., the radius of gyration (R-g), plays a very important role in polymer crystallization. When d(c) less than or equal to R-g, crystallization does not necessitate a chain disentangling. The entanglements are just shifted into the amorphous regions. However, as d(c)>R-g, i.e., as the crystal thickness gets larger than the radius of gyration of the chain in the melt, it becomes necessary for a chain to disentangle. Then a change of crystallization mechanism occurs. Such change has been experimentally observed in the crystallization of poly(I-butene). A change in the crystal morphologies from spherulite to quadrangle, is seen via PLM, as crystallization temperatures increase. Even more, such a change is molecular weight dependent, and shifts to lower temperature as molecular weight decreases. There exists a jump of crystal thickness and crystallinity associated with morphological change, as seen via SAXS. A change of crystallization kinetics and crystallinity is further evidenced via dilatometry. The unique feature of P1b crystallization has been discussed based on the radius of gyration of chain in the melt (R-g), and very good agreement is obtained.

Crystallization and Crystalline Structure of Syndiotactic Polypropylene and Syndiotactic-Poly(1-Butene) Blend

The crystallization and crystalline structure of syndiotactic-polypropylene (sPP) and syndiotactic-poly(1-butene) (sPB) blend containing 10 (Bl-10), 25 (Bl-25), 50 (Bl-50), 75 (Bl-75), and 90 (Bl-90) wt% of sPB, have been investigated by means of differential scanning calorimetry (DSC), FT-IR, and wide-angle X-ray diffraction (WAXD) analyses. The melt-crystallization behavior of the blend samples was studied by DSC on the cooling process at constant rates. Bl-50, Bl-75, and Bl-90 showed lower crystallization temperatures than the neat sPP. sPP in Bl-75 showed the lowest crystallization rate among the blend samples. Bl-90 showed a two-phase molten state, and sPP in Bl-90 crystallized via two-stepprocess. Time evolution of FT-IR spectroscopy at room temperature detected conformational transformation of the sPP polymer chain in the blend samples of Bl-50 and Bl-75. The absorption peaks intensity in the FT-IR spectra derived from the helical conformations in the crystalline phase decreased, and the planar zigzag conformations in the amorphous and mesophase phases decreased over the crystallization time. The time evolution of the WAXD profile of Bl-90 indicated that sPP in the blend accelerated the crystallization of sPB. The crystallized Bl-10, Bl-25, and Bl-50 samples showed diffraction peaks in WAXD profiles and melting endothermic peak in DSC profiles derived from only the sPP crystal. The crystallinity and melting temperature of sPP in the crystallized Bl-10, Bl-25, and Bl-50 samples were almost independent of the sPB content. Both the crystalline structure of sPP and sPB were detected in Bl-75 and Bl-90. Bl-75 showed the lowest crystallinity and melting temperature of sPP among the blend samples.

Preparation of phosphorus-modified PITQ-13 catalysts and their performance in 1-butene catalytic cracking

A series of phosphorus-modified PITQ-13 catalysts was prepared by wet impregnation of NH4H2PO4 solution into an HITQ-13 parent. The catalysts were characterized using XRD, N2 adsorption, MAS NMR and NH3-TPD. Their catalytic performance in 1-butene catalytic cracking was evaluated in a fixed fluidized bed reactor. The results showed that the crystallinity, surface area and pore volume of P-modified PITQ-13 catalysts decreased with the increasing amounts of P. The number of weak acid sites increased, whereas that of strong acidity decreased. The selectivity to propylene in 1-butene cracking reactions increased because of the decrease in strong acidity. The yield of propylene achieved 41.6% over PITQ-13-2 catalyst with a P content of 1.0 wt%, which was 5.1% greater than that achieved over HITQ-13 catalyst.

1-Butene isomerization and metathesis over Mo/mordenite-alumina: Factors influencing product distribution and induction period

Effects of space velocity, reaction temperature and support acidity on product distribution and induction period in 1-butene isomerization and metathesis over Mo/mordenite-alumina were investigated. As revealed by the catalytic performance results, induction period and objective product were closely related to the reaction conditions. Lower space velocity led to longer induction period and higher propene yield. The optimal reaction temperature for propene production is around 150 ~C and it shifted to 100 ~C for ethene production. 1-Butene auto-metathesis predominated in the reaction network if the support with lower degree of sodium exchanged. And propene gradually became the dominant product upon increasing the support sodium exchange degree. 6Mo/H100Na0M-30A1 catalyst with a support of full sodium exchange degree exhibited the highest propene yield.

Production of propene from 1-butene metathesis reaction on tungsten based heterogeneous catalysts

A new propene production route from 1-butene metathesis has been developed on heterogeneous 10WO3/Al2O3-HY catalysts with different HY contents. It is found that the catalysts play bi-functionally first for the isomerization of 1-butene to 2-butene and then for the cross-metathesis between 1-butene and 2-butene to propene and 2-pentene. The combination of HY zeolite and Al2O3 is prerequisite for the production of propene. The propene yield keeps increasing with the HY content in the range of 10-70 wt%, where 10WO3/Al2O3-70HY exhibits the highest propene yield. The MS-H2-TPR and MS-O2-TPO characterizations indicate that the increase of HY content in the catalysts weakens the interaction between W species and supports, whereas enhance the probability of coking on the metal species and acid sites.

MCM-36 zeolites tailored with acidic ionic liquid to regulate adsorption properties of isobutane and 1-butene

Adsorption properties of an adsorbent or a catalyst towards adsorbates are crucial in the process of adsorption separation or catalytic reaction. Surface morphology and structure of adsorbents have a significant impact on the adsorption properties. In this study, a novel acidic ionic liquid, 1-butyl-3-(triethoxysilylpropyl)imidazolium hydrogen sulfate(i.e., [BTPIm][HSO_4]), was synthesized and subsequently grafted onto the MCM-36 zeolite for the regulation of its adsorption properties towards isobutane and 1-butene. The resultant [BTPIm][HSO_4]-immobilized MCM-36(i.e., MCM-36-IL) was characterized by FT-IR, XPS, XRD, SEM, TG/DTG and N_2 adsorption–desorption measurement. It was found that the specific surface area, micropore volume and mesopore volume of the MCM-36 support underwent a reduction upon the immobilization of ionic liquid,while the surface density of acid increased from 0.0014 to 0.0035 mmol·m^(-2). The adsorption capacity of isobutane and 1-butene on the MCM-36-IL was determined by a static volumetric method. Results demonstrated that the interaction between isobutane and MCM-36-IL was enhanced and the interaction between 1-butene and MCM-36-IL was reduced. As a result, a tunable adsorption ratio of isobutane/1-butene on MCM-36 was achieved.With the increase in surface density of acid and the tunable adsorption ratio of isobutane and 1-butene on the functionalized MCM-36, the acidic ionic liquid-immobilized zeolites are beneficial to obtain an improved reaction yield and a prolonged catalyst life in the reactions catalyzed by solid acid.

The influence of different monodentate P-ligand mixtures on Rh-catalyzed 1-butene hydroformylation

Four monodentate P-ligands and their mixtures（six groups of double-ligand systems,four groups of triple-ligand systems and one group of tetra-ligand system）were used with Rh（acac）（CO）2（acac=acetylacetonate）or Rh（acac）CO（PPh3）as the catalyst in the hydroformylation reaction of 1-butene.It was found that different Rh catalysts showed little difference in the catalysis performance.The general order of catalysis performance is doubleligand system 〉 single-ligand system〉triple-ligand system 〉 tetra-ligand system.Some synergistic effect in the double-ligand system was detected which needs a further investigation.

Regulation of isobutane/1-butene adsorption behaviors on the acidic ionic liquids-functionalized MCM-22 zeolite

The adsorption ratio of isobutane/1-butene on the catalyst surface is one of the most important factors for the C4 alkylation process. Regulation of isobutane/1-butene adsorption ratio on the zeolite-supported acid catalyst is a big challenge for catalyst preparation. To regulate the isobutane/1-butene adsorption ratio, four types of ionic liquid （i.e., IL） with different alkyl chain lengths and different acid group numbers were synthesized and were subsequently immobilized onto the MCM-22 zeolite. The as-synthesized IL-immobilized MCM-22 （i.e., MCM-22-IL） was characterized by FT1R, TGA, BET, XPS and XRD, and their adsorption capacities and adsorption molar ratios of isobutane to l-butene （I/O） were investigated to correlate with surface features of MCM-22-IL Results showed that the immobilization of ILs led to a decrease of specific surface area and pore volume. But the surface density of acid groups was increased and the adsorption molar ratio of isobutane/1-butene （I/O） was significantly im- proved by the immobilization of ionic liquids. The adsorption molar ratio of I/O is substantially improved from 0.75 to above 0.9 at 300 kPa upon immobilizing ILs. Although the alkyl chain length oflLs was found to have little effect on the adsorption molar ratio of I/O, the increase of acid group numbers led to a dramatic decrease in the adsorption I/O ratio. The results illustrated that immobilizing ionic liquids is an effective way to modify the textural, chemical and morphological properties of MCM-22. Accordingly, the immobilization of ionic liquids provides a novel and a feasible way to regulate the adsorption I/O ratio on an adsorbent or a solid catalyst.

Investigation on the synthesis conditions of poly(4-methyl-1-pentene)hollow fiber membrane with high gas permeability and strong tensile strength

Poly(4-methyl-1-pentene)hollow fiber membranes(PMP HFMs)are commonly used in gas separation membrane and artificial lung membrane in extracorporeal membrane oxygenation(ECMO),and its porous structure and mechanical properties have a significant impact on the performance of the membrane material.In our work,PMP HFMs were prepared by thermally induced phase separation method.Subsequently,through characterization analysis of powder X-ray diffraction,universal tensile machine,scanning electron microscope and other instruments,the effects of PMP concentration,diluent ratio,quenching temperature,air gap distance and winding speed on the membrane performance were systematically investigated to obtain optimal preparation conditions for PMP HFMs.The results showed that the PMP HFMs prepared under optimal conditions possessed good gas permeability with a nitrogen flux of 10.5 ml·MPa^(-1)·cm^(-2)·min^(-1),a surface dense layer,and a good tensile strength of 9.33 MPa.We believed that this work could provide useful references for the application of PMP membranes in the medical field.

基质细胞衍生因子1修饰左旋聚乳酸多孔微球促进软骨细胞增殖和组织形成

背景:二维培养条件下的软骨细胞增殖及表型维持受限,多孔微球作为支架材料可提供三维培养环境,以更好地模拟体内生长条件。基质细胞衍生因子1是有强趋化效力的稳态细胞因子,能够促进细胞的黏附与增殖。目的:明确接枝基质细胞衍生因子1左旋聚乳酸多孔微球对软骨细胞生物学特性及软骨组织形成的影响。方法:(1)体外验证不同质量浓度基质细胞衍生因子1对兔软骨细胞增殖、迁移、表型维持的影响。(2)采用复乳法制备左旋聚乳酸多孔微球,利用碳二亚胺法将基质细胞衍生因子1接枝于左旋聚乳酸多孔微球上,通过酶联免疫吸附实验及孵育基质细胞衍生因子1特异荧光抗体验证接枝情况。(3)将兔软骨细胞分别接种于左旋聚乳酸多孔微球、接枝基质细胞衍生因子1左旋聚乳酸多孔微球上,检测细胞增殖与黏附。(4)在裸鼠背部皮下分别植入甲基丙烯酰胺基明胶-软骨细胞复合体(对照组)、左旋聚乳酸多孔微球-甲基丙烯酰胺基明胶-软骨细胞复合体(多孔微球组)、接枝基质细胞衍生因子1左旋聚乳酸多孔微球-甲基丙烯酰胺基明胶-软骨细胞复合体(多孔微球修饰组),8周后取材,分别进行组织学染色与成软骨相关基因qRT-PCR检测。结果与结论:(1)相较于0,1 000 ng/mL基质细胞衍生因子1,500 ng/mL基质细胞衍生因子1可促进软骨细胞的增殖与迁移,提升软骨细胞内Ⅱ型胶原、弹性蛋白、增殖细胞核抗原、Bcl-2 mRNA表达;(2)基质细胞衍生因子1成功接枝于左旋聚乳酸多孔微球上,接枝率为93.75%;(3)相较于左旋聚乳酸多孔微球,接枝基质细胞衍生因子1左旋聚乳酸多孔微球可促进软骨细胞的增殖、黏附;(4)裸鼠皮下植入8周后,相较于对照组、多孔微球组,多孔微球修饰组具有更明显的软骨陷窝结构、更丰富的软骨特异性基质和Ⅱ型胶原沉积,弹性蛋白、Ⅱ型胶原、增殖细胞核抗原、Bcl-2 mRNA表达升高。结果表明:接枝基质细胞衍生因子1左旋聚乳酸多孔微球有利于软骨细胞的黏附、增殖、表型维持以及体内软骨组织形成。

NEP1-40/PLGA对大鼠面神经损伤的修复效果研究

目的 探究神经生长抑制因子胞外肽残基1-40(neurite outgrowth inhibitor extracellular peptide residues1-40,NEP1-40)联合聚乳酸-羟基乙酸共聚物[poly(lactic-co-glycolic acid),PLGA]明胶电纺纤维膜对大鼠面神经损伤修复的影响。方法 获得单位实验动物伦理委员会的批准,按照随机分组原则将108只雄性SD大鼠分为4组,每组27只。即假手术组、对照组、PLGA组、NEP1-40+PLGA组。除假手术组外,其余组均建立面神经断裂后缝合损伤模型,对照组不作进一步处理,PLGA组采用PLGA膜包裹支持,NEP1-40+PLGA组在采用PLGA膜包裹支持基础上即刻局部注射NEP1-40(5μg/μL)10μL,单次。实验采用面神经功能检查、电生理学检测、透射电镜观察、HE染色、免疫组织化学染色髓鞘标记物S100β和轴突标记物β3-tubulin,在术后2、4、8周对大鼠损伤面神经的恢复情况进行评估。结果 8周时面神经功能评分NEP1-40+PLGA组优于对照组和PLGA组(P <0.001),面神经功能得到明显恢复;电生理检测受损面神经损伤处神经动作电位NEP1-40+PLGA组波幅高于对照组和PLGA组(P <0.001),但动作电位潜伏期与传导速度结果各组间无明显差距(P> 0.05)。2、4、8周时透射电镜观察面神经损伤处横截面有髓神经纤维数目和髓鞘厚度NEP1-40+PLGA组高于其他组(P <0.05);HE染色观察到8周时对照组面神经部分恢复但整体观细胞分布不均且与周围组织界限略显模糊,NEP1-40+PLGA组细胞分布相对较为均匀,与周围组织分界较为清晰。2、4、8周时免疫组化结果显示面神经损伤处横截面NEP1-40提高了神经标记物S100β和β3-tubulin的表达,尤其是β3-tubulin已接近正常水平(P> 0.05)。结论 NEP1-40有利于损伤部位新生髓鞘及轴突的生成,在一定程度上能够促进受损面神经修复再生,加速损伤神经功能的恢复。

电容器用双向拉伸聚4-甲基-1-戊烯(BOPMP)薄膜开发与应用

聚4-甲基-1-戊烯(PMP)是一种具有等规结构的新型热塑性塑料,PMP为结晶性树脂,熔点在235℃~240℃之间,耐热性好,可在高温下使用,并具有卓越的电气绝缘和介电性能。与聚丙烯树脂相比,熔点高60℃,介电常数、介电损耗相近。随着我国电子工业的发展,PMP的用量在近年来有大幅的增长。目前世界上只有日本三井化学株式会社生产,由于产量有限、售价较高,限制了PMP在国内的应用。为此本文尝试采用双向拉伸的方法,试制聚4-甲基-1-戊烯(BOPMP)薄膜,并加工成金属化膜,试制电容器,最后对电容器的性能进行相应测试评价。采用不同牌号原料生产BOPMP薄膜,其电压击穿强度差别较大,不同频率下的BOPMP薄膜电容器损耗角正切值、介电常数均与BOPP薄膜电容器接近,但其高温下的性能有待进一步验证。如何提升BOPMP薄膜电压击穿强度及其耐热性,开发出适宜于双向拉伸的PMP粒子原料,生产出高质量的BOPMP电容薄膜,将是未来重点研究的方向。

SYNTHESIS,CHARACTERIZATION AND OPTICAL PROPERTIES OF THE COPOLYMERS OF C_(60) AND 1-PHENYL-1-PROPYNE

While WCl_6-Ph_4Sn fails to polymerize 1-phenyl-1-propyne (PP) at room temperature, highmolecular weight (M_w up to 410× 10~3) polymers are obtained in high yields (up to 80%) when thepolymerizations of PP are carried out in the presence of C_(60) using the W catalyst under the same conditions.The polymers are soluble in common organic solvents such as THF, chloroform, and toluene. Molecularstructures of the polymers are characterized by FT-IR, UV, NMR, GPC and XRD, and it is found that C_(60) iscopolymerized with PP. Thus C_(60) plays the dual roles of comonomer and cocatalyst in the polymerizationreaction. C_(60) contents of the copolymers can be easily changed by varying the C_(60) amounts in the feedmixtures. The copolymers effectively limit strong 532 nm laser pulses, whose limiting performance issuperior to that of parent C_(60).

MORPHOLOGIES AND GAS SEPARATION PROPERTIES OF MELT-SPUN ASYMMETRIC POLY(4-METHYL-1-PENTENE)HOLLOW FIBER MEMBRANES

Poly(4-methyl-1-pentene) (PMP) hollow fiber membranes were prepared by the melt-spun and cold-stretch(MSCS) method. Scanning electronic microscopy (SEM) was used to characterize the section and surface structures of themembranes with special asymmetric structure. The preliminary results of gas permeation measurements indicated that the resultant hollow fiber membranes have the potential ability for oxygen/nitrogen separation.

Characterization and Apparent Kinetics of Polymerization of 1-Decene Catalyzed by Boron Trifluoride/Alcohol System

Poly-α-olefin(PAO) synthetic oil is the base oil of high-quality lubricants, and has a huge market potential.We illustrate PAO synthesis by catalytic polymerization of 1-decene with a boron trifluoride(BF_3)/alcohol system. Gas chromatography–mass spectrometry, proton nuclear magnetic resonance and ^(13) C nuclear magnetic resonance analysis confirmed dimer, trimer and tetramer structures of PAO. Each component contained branched chains with a 1,2 insertion of a head-to-tail link; a 2,1 insertion of a tail-to-tail link and a methyl-containing linked structure. At a low conversion rate, the reaction rate was related directly with the reaction temperature and the catalyst/1-decene concentration. An apparent kinetic equation for PAO formation was determined during 1-decene polymerization.

Multiple facets of poly(ADP-ribose) polymerase-1 in neurological diseases

The highly conserved abundant nuclear protein poly （ADP-ribose） polymerase-1 （PARP-1） is activated by DNA damage. PARP-1 activation is associated in DNA repair, cell death and inflammation. Since oxidative stress induced robust DNA damage and wide spread inflamma- tory responses are common pathologies of various CNS diseases, the attention towards PARP-1 as a therapeutic target has been amplifying. This review highlights the multiple roles of PARP- 1 in neurological diseases and po- tential of PARP- 1 inhibitors to enter clinical translation.

Studies on the Conformation of Poly (1-naphthol) Assembled by Horseradish Peroxidase in Aqueous Micelle

FTIR, UV-visible , fluorescence spectra and calculation of CPK model indicated that poly(1-naphthol) synthesized and assembled by horseradish peroxidase(HRP) in aqueous micelle was constructed with orderly helical conformation, which was the lowest energy conformation of the polymer under this condition and resulted in an advanced c-conjugated system.

XPS STUDIES ON SURFACE MODIFIED POLY [1-(TRIMETHYLSILYL)-1-PROPYNE] MEMBRANES Ⅱ SURFACE MODIFICATION BY BROMINE VAPOR

Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 min, then it reached a plateau. The results of XPS and IRstudies indicated that the addition of bromine to double bonds and the replacement of H on CH_3 bybromine had taken place so that a new peak at 286.0 eV (C--Br)in C_(1s) spectra and some newbands, e. g. at 1220 and 580cm^(-1) in IR spectra were formed. The fact,t Po_2, permeability ofoxygen, decreased and α_(O_2/N_2), separation factor of oxygen relative to nitrogen, increased withbromination time, shows that surface modification of PTMSP by bromine may be an efficient approach to prepare PTMSP membranes used for practical gas separations.

Poly(ADP-ribose) polymerase-1 gene polymorphism in various Chinese nationalities

Poly （ADP-ribose） polymerase-1 （PARP-1） can exacerbate ischemic brain injury and lessen ischemic neuronal death, which may be associated with PARP-1 polymorphisms. The present study investigated human PARP-1 gene polymorphisms in various Chinese nationalities, the results of which could potentially help in the treatment and prevention of neurologic diseases. Genetic polymorphisms of seven exons in the PARP-1 gene, in 898 Chinese Han, Buyi, Shui, Miao, and Zhuang subjects, were investigated by PCR-single-strand conformation polymorphism. A single-strand conformation polymorphism variant in exons 12, 13, 16, and 17 of the PARP-1 gene was identified in 148 people, with two stationary bands showing three degenerative single strands. Results showed that the PARP-1 gene polymorphisms exist in various nationalities, and may act as a biomarker for susceptibility to disease.

SOLID-STATE HIGH RESOLUTION NMR STUDY ON POLY (2, 6-DIMETHYL-1,4-PHENYLENE OXIDE)

Experiments including C-13 spin-lattice relaxation, C-13 heteronuclear dipolar dephasing and H-1 spin diffusion are performed on poly (2,6-dimethyl-1,4-phenylene oxide) (PPO). The results show that the rotation of the methyl groups in solid PPO is partially restricted, which results in a surprisingly efficient spin diffusion between the aromatic proton and methyl proton characterized by a diffusion time of 150 mu s. The results also show that the aromatic ring in solid PPO is rigid and twisted, which causes all aromatic carbons to be chemically unequivalent.