Study of Thermal,Phase Morphological and Mechanical Properties of Poly(L-lactide)-b-Poly(ethylene glycol)-b-Poly(L-lactide)/Poly(ethylene glycol)Blend Bioplastics

A poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide)(PLLA-PEG-PLLA)block copolymer has great potential for use as a flexible bioplastic.Highly flexible bioplastics are required for flexible packaging applications.In this work,a PEG was incorporated into block copolymer as a plasticizer by solvent casting.PLLA-PEG-PLLA/PEG blends with different blend ratios were prepared,and the plasticizing effect and miscibility of PEG in block copolymer were intensively investigated compared to PLLA/PEG blends.The results indicated that the PEG was an effective plasticizer for the block copolymer.The blending of PEG decreased glass-transition temperature and accelerated the crystallization of both the PLLA and PLLA-PEG-PLLA matrices.The PEG was completely miscible when blended with block copolymer and it improved thermal stability of the block copolymer matrix but not of the PLLA matrix.Film extensibility of PLLA-PEG-PLLA/PEG blends steadily increased as the PEG ratio increased.These non-toxic and highly flexible PLLA-PEG-PLLA/PEG bioplastics are promising candidates for several applications such as biomedical devices,tissue scaffolds and packaging materials.

NON-ISOTHERMAL CRYSTALLIZATION OF POLY(L-LACTIDE)(PLLA) UNDER QUIESCENT AND STEADY SHEAR CONDITIONS

The non-isothermal crystallization of poly（L-lactide） （PLLA） under quiescent and steady shear flow conditions was in situ investigated by using polarizing optical microscopy （POM） with a hot shear stage and wide-angle X-ray diffraction （WAXD）. The shear rate and the cooling rate both play a significant role in the final crystalline morphology and crystallinity. Under quiescent conditions, the morphology assumes different sized spherulites, and its crystallinity dramatically reduces with increasing the cooling rate. On the other hand, the shear flow increases the onset crystallization temperature, and enhances the final crystallinity. When the shear rate is above 5 s^-1, cylindrite-like crystals are observed, furthermore, their content depends on the cooling rate.

Poly(L-lactide)-Poly(ethylene glycol) Multiblock Copolymers: Synthesis and Properties

Poly (L-lactide)-poly(ethylene glycol) multiblock copolymers with predetermined block lengths were synthesized by polycondensation of PLA diols and PEG diacids. These copolymers presented special properties, such as better miscibility between the two components, low crystallinity and better hydrophilicity, which can be modulated by adjusting the block lengths of the two components.

4天香烟烟雾暴露联合poly(I:C)刺激对小鼠肺部免疫应答及干扰素表达的影响

目的:探讨短期香烟烟雾暴露联合poly(I:C)刺激对小鼠肺部免疫应答及干扰素表达的影响。方法:BALB/c小鼠随机分为4组:对照组、熏烟组、poly(I:C)组和熏烟联合poly(I:C)组。检测支气管肺泡灌洗液(BALF)中总细胞数及细胞分类计数;普通光镜下观察各组细胞形态;荧光定量PCR检测肺组织细胞因子、趋化因子和干扰素及干扰素刺激基因表达。结果:与对照组相比,熏烟联合poly(I:C)组总细胞数计数、巨噬细胞与中性粒细胞计数明显升高(P<0.05),且熏烟联合poly(I:C)组巨噬细胞计数高于poly(I:C)组;与poly(I:C)组比较,熏烟联合poly(I:C)组小鼠气道灌洗液巨噬细胞体积较大,呈圆形或不规则形,细胞质较多空泡;与对照组相比,熏烟联合poly(I:C)组小鼠肺组织中性粒细胞趋化因子CXCL1(P<0.05)、CXCL2(P<0.01)和淋巴细胞趋化因子CCL2(P<0.01)mRNA表达升高,肺组织IL-1β、IL-6、TNF-αmRNA表达明显升高(P<0.01),肺组织IFN-β(P<0.01)、IFN-γ(P<0.05)、MX2(P<0.01)和IP-10(P<0.01)表达显著升高,且与poly(I:C)组小鼠相比,熏烟联合poly(I:C)组小鼠肺组织CXCL2(P<0.05)、TNF-α(P<0.01)和IFN-β(P<0.05)mRNA表达明显升高。结论:熏烟联合poly(I:C)诱导了小鼠肺部炎症反应和干扰素及干扰素刺激基因表达。同时,香烟暴露加剧了poly(I:C)诱导的小鼠肺部急性炎症反应和Ⅰ型干扰素表达。

Microwave-assisted Polymerization of D,L-Lactide with Stannous Octanoate as Catalyst

Poly (lactic acid) (PLA) was synthesized by microwave-assisted ring-opening polymerization of D, L-lactide with stannous octanoate (SnOct(2)) as catalyst. Its weight-average molar mass (M-w) ranged from 39000 to 67000 and the polydispersity index from 1.3 to 1.7. The polymerization rate was much faster than that of the conventional thermal polymerization. A degradation of newly formed PLA in reaction mixture by microwave irradiation was observed.

Montmorillonite/Poly(L-Lactide)microcomposite spheres as reservoirs of antidepressant drugs and their controlled release property

This work evaluates intercalation of Nortriptyline(NT)and Venlafaxine(VFX)in an interlayer gallery of Na^(+)-MMT(Montmorillonite),which was further compounded with Poly(LLactide)(PLLA)to form microcomposite spheres(MPs)for oral controlled drug delivery.The XRD patterns,thermal and spectroscopic analyses indicated intercalation of drugs into the MMT interlayer that was stabilized by electrostatic interaction.No significant changes in structural and functional properties of drugs were found in the MMT layers.In vitro drug release studies showed controlled release pattern.

The Ring-opening Polymerization of D, L-Lactide Initiated with Stannous Octoate

The ring-opening polymerization of D, L-lactide in the melt was systematically investigated by using stannous octoate as the initiator. The molecular weight of poly (D, L-lactide) was characterized with M,. Mn and Mw respectively. The results indicated that five variables, namely purity of monomer, initiator to monomer ratio, vacuum level, polymerization temperature and polymerization time had different influences on the molecular weight and molecular weight distribution of poly(D. L-lactide).

Different crystallinity of poly(d,l-lactide-co-p-dioxanone) copolymers acquired by control of chain microstructure

Poly（d,l-lactide-co-p-dioxanone） （P（LA-co-PDO）） copolymers with different chain microstructures were synthesized by onestep or two-step bulk ring-opening polymerizations of d,l-lactide （LA） and p-dioxanone （PDO） monomers using stannous octoate [Sn（Oct）2]/n-dodecanol as the initiating system. The average sequence lengths of the lactidyl （LLA） and dioxanyl （LpDo） units were calculated from the ^1H NMR spectra. It was found that both LLA and Lpoo values from the two-step syntheses were significantly longer than those from the corresponding one-step syntheses, indicating more blocky structure achieved for the twostep copolymers. Corresponding to this difference in microstructure, the two-step copolymers were semi-crystalline, while the one-step copolymers were completely amorphous. In conclusion, the crystallinity of P（LA-co-PDO） copolymers could be adjusted conveniently to meet specific applications by changing the microstructure of the copolymers via different polymerization routes.

Stable Cycling of All-Solid-State Lithium Metal Batteries Enabled by Salt Engineering of PEO-Based Polymer Electrolytes

Poly(ethylene oxide)(PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries;however,they present limitations of low room-temperature ionic conductivity,and interfacial incompatibility with high voltage cathodes.Therefore,a salt engineering of 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide lithium salt(LiHFDF)/LiTFSI system was developed in PEO-based electrolyte,demonstrating to effectively regulate Li ion transport and improve the interfacial stability under high voltage.We show,by manipulating the interaction between PEO matrix and TFSI^(-)-HFDF^(-),the optimized solid-state polymer electrolyte achieves maximum Li+conduction of 1.24×10^(-4)S cm^(-1)at 40℃,which is almost 3 times of the baseline.Also,the optimized polymer electrolyte demonstrates outstanding stable cycling in the LiFePO_(4)/Li and LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)/Li(3.0-4.4 V,200 cycles)based all-solid-state lithium batteries at 40℃.

A Series of Rare Earth Phenolates Substituted by Alkyl Groups for D,L-Lactide Ring-Opening Polymerization

Single component rare earth phenolates substituted by various alkyl groups have been prepared and the correlation between the aryloxides＇ structure and catalytic activity in the ring-opening polymerization of D,L-lactide has also been investigated.The catalytic activity of all rare earth aryloxides,characteristics of the ring-opening polymerization as well as polymerization kinetics and mechanism were investigated.The results showed that both phenolates＇ catalytic activities and polymerization characteristics changed regularly,keeping in good concordance with variations in substitutents＇ number on phenol and structure of aryloxide ligands.The stronger ability of electron-donation of alkyl groups,the higher catalytic activity.Moreover,the more numbers of substituted alkyl on phenyl ring,the higher catalytic activity.The analyses of polymer ends revealed that the polymerization proceeded via a coordination-acyl-oxygen bond cleavage-insertion mechanism.

Flexible and Robust Functionalized Boron Nitride/Poly(p‑Phenylene Benzobisoxazole)Nanocomposite Paper with High Thermal Conductivity and Outstanding Electrical Insulation

With the rapid development of 5G information technology,thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent.In this work,“high-temperature solid-phase&diazonium salt decomposition”method is carried out to prepare benzidine-functionalized boron nitride(m-BN).Subsequently,m-BN/poly(pphenylene benzobisoxazole)nanofiber(PNF)nanocomposite paper with nacremimetic layered structures is prepared via sol–gel film transformation approach.The obtained m-BN/PNF nanocomposite paper with 50 wt%m-BN presents excellent thermal conductivity,incredible electrical insulation,outstanding mechanical properties and thermal stability,due to the construction of extensive hydrogen bonds andπ–πinteractions between m-BN and PNF,and stable nacre-mimetic layered structures.Itsλ∥andλ_(⊥)are 9.68 and 0.84 W m^(-1)K^(-1),and the volume resistivity and breakdown strength are as high as 2.3×10^(15)Ωcm and 324.2 kV mm^(-1),respectively.Besides,it also presents extremely high tensile strength of 193.6 MPa and thermal decomposition temperature of 640°C,showing a broad application prospect in high-end thermal management fields such as electronic devices and electrical equipment.

SYNTHESIS,CHARACTERIZATION AND NANOPARTICLE FORMATION OF STAR-SHAPED POLY(L-LACTIDE)WITH SIX ARMS

Well-defined star-shaped poly(L-lactide)with six arms(sPLLA)was synthesized via the ring-opening polymerization of L-lactide using dipentaerythritol as initiator and stannous octoate as catalyst in bulk at 125~C.The effects of molar ratios of both monomer to initiator and monomer to catalyst on the molecular weights of as-synthesized sPLLA polymers were in detail investigated.The molecular weights of sPLLA polymers linearly increased with the molar ratio of monomer to initiator,and the molecular weight dist...

STABILIZATION, REFORMATION AND MELTING OF POLY(L-LACTIDE) CRYSTALLITES

The large size of the crystallites in poly（L-lactide） and the low growth rate enable detailed time- and temperaturedependent X-ray scattering studies of the ordering processes to be carded out. A layer located intermediate between crystals and melt-like regions is observed which finally takes on crystalline order. Recrystallization processes during heating change the complete stack structure rather than the crystallites individually and produce voids in the stacks, Establishment of a new stable structure after a temperature jump in the melting range can be followed in time. DSC experiments indicate times of melting of the order of minutes.

Research in the Degradation and Antifouling Performance of Copolyesters of L-Lactide and ε-Caprolactonen

Block copolyesters of L-lactide and ε-caprolactone were synthesized by melt copolymerization of ε-caprolactone and L-lactide.The degradation performance of copolyesters was investigated by quartz crystal microbalance with dissipation(QCM-D).Diisocyanate terminated copolyesters could obtain via the reaction of copolyesters and diisocyanate.Diisocyanate terminated copolyesters could react with polyol resin to prepare degradable polyurethane which can be used in antifouling coatings.In this paper,we also discussed the degradation products release action and antifouling performance of the copolyesters film.

Poly (L-lactide-co-e-caprolactone)/Functionalized CNTs Nanocomposite,Thermal and Mechanical Properties

Multiwalled carbon nanotubes(MWCNTs) grafted with poly(L-lactide-e-caprolactone)(PCLA) were synthesized by ring opening polymerization reaction and used as a reinforcement for neat PCLA.Scanning electron microscopy(SEM) revealed that the applied tensile load on the composite was transferred to the MWNT-OH-g-PCLA,loading to a strain failure of the MWCNTs rather than an adhesive failure between the MWCNTs and the matrix.

NOVEL COMPOSITES OF POLY(L-LACTIDE)AND SURFACE MODIFIED BIOACTIVE SiO_2-CaO-P_2O_5 GEL NANOPARTICLES:MECHANICAL AND BIOLOGICAL PROPERTIES

Bioactive SiO2-CaO-P2O5 gel (BAG) nanoparticles with 40 nm in diameter were synthesized by the sol-gel route and further modified via the ring-opening polymerization of lactide on the surface of particles. Surface modified BAG (mBAG) was introduced in poly(L-lactide) (PLLA) matrix as bioactive filler. The dispersibility of mBAG in PLLA matrix was much higher than that of rough BAG particles. Tensile strength of the mBAG/PLLA composite could be increased to 61.2 MPa at 2 wt% filler content from 53.4 MPa for pure PLLA. The variation of moduli of the BAG/PLLA and mBAG/PLLA composites always showed an enhancement tendency with the increasing content of filler loading. The SEM photographs of the fracture surfaces showed that mBAG could be homogeneously dispersed in the PLLA matrix, and the corrugated deformation could absorb the rupture energy effectively during the breaking of materials. In vitro bioactivity tests showed that both BAG and mBAG particles could endow the composites with ability of the calcium sediment in SBF, but the surface modification of BAG particles could weaken this capability to some extent. Biocompatibility tests showed that both BAG and mBAG particles could facilitate the attachment and proliferation of the marrow cells on the surface of the composite. All these results showed that the mBAG/PLLA composite would be a promising material for bone tissues regeneration.

Surface-modified Biphasic Calcium Phosphate/Poly (L-lactide) Biocomposite

Biphasic calcium phosphate （BCP） powders were prepared by hydrolyzation proc-ess and surface-modified by directly grafted L-lactide （LLA） onto the surface of BCP through a chemical linkage. The grafting ratio of organic groups was 9 wt%. After surface modification, the surface of BCP powders was covered by the lamella-shaped crystal. Poly （L-lactide） was mixed with BCP to form the BCP/PLLA biocomposite. Modified BCP （mBCP） particles could be uniformly dis-persed in PLLA matrix. The compressive strength of the mBCP/PLLA composite is 115 MPa, 28% higher than that of unmodified-BCP/PLLA composite. The improved mechanical strength is attributed to the enhanced adhesion between the inorganic BCP filler and the organic PLLA matrix.

Toughening of Poly (L-lactide) with Branched Multiblock Poly (ε-caprolactone)/poly (D-lactide) Copolymers

A total biodegradable elastomer,branched multiblock poly( ε-caprolactone)/poly( D-lactide)( BMCD) was prepared using 3-isocyanatopropyltriethoxysilane( IPTS) as a coupling agent.To improve the toughness of poly( L-lactide)( PLLA),PLLA/BMCD blends were prepared via a simple solvent evaporation method at various BMCD loadings. Tensile test showed that the elongation at break of PLLA blends increased to 50. 97% and104. 55% at the loadings of 5% and 7%( mass fraction) BMCD respectively, with no sacrifice of their biodegradability. This approach allowed for simultaneous control of mechanical and biodegradable properties of PLLA with a few additives in actual production. Furthermore, UV-VIS test showed that the light transmittance of the films at the loadings of 5%( mass fraction)BMCD was almost the same as pure PLLA at 400 nm.

THE RING-OPENING POLYMERIZATION OF D,L-LACTIDE WITH ONE COMPONENT RARE EARTH CATALYST

(D, L)-Lactide (LA) was first polymerized with one component of rare earth catalysts [Nd(naph)(3), Nd(oct)(3), Nd(O-iPr)(3), Nd(AcAc)(3), Y(AcAc)(3), Sm(AcAc)(3), Er(AcAc)(3))] respectively in solution and in melt state. The effects of [Cat]/[La] molar ratio, solvents, polymerization time, temperature, various rare earth Elements and ligands were investigated in detail. The results showed that both the conversion of polymerization and the molecular weight (MW) of poly (D, L-Lactide) (PLA) in melt polymerization are higher than that in solution polymerization, but the polymerization rate in melt was lower than in solution. The molecular weight distribution (MWD) of PLA is broader with increasing temperature. X-ray study indicated that PLA obtained by Nd(AcAc)(3) in melt polymerization is an amorphous polymer.

Bioactivity of bioresorbable composite based on bioactive glass and poly-L-lactide

Bioactive and bioresorbable composite was fabricated by a solvent evaporation technique using poly-L-lactide(PLLA) and bioactive glass (average particle size: 6.8 μm). Bioactive glass granules are homogeneously distributed in the composite with microcrack structure. The formation of hydroxyapatite(HA) on the composite in simulated body fluid(SBF) was analyzed by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), X-ray diffraction(XRD), and Raman spectra. Rod-like HA crystals deposit on the surface of PLLA/bioactive glass composite after soaking for 3 d. Both rod-like crystals and HA layer form on the surface for 14 d in SBF. The high bioactivity of PLLA/bioactive glass composite indicates the potential of materials for integration with bone.