Synthesis and characterization of new soluble poly(aryl ether nitrile)s containing phthalazinone moiety

A series of novel poly（aryl ether nitrile）s containing phthalazinone moiety were synthesized by the nucleophilic displacement reaction of bisphenol-like monomers （I） with 2,6-difluorobenzonitrile. The inherent viscosities ranged from 0.46 to 1.07 dL g^-1. The glass transition temperatures were in the range of 277-295℃, and the temperatures for 10% weight loss in nitrogen atmosphere were found between 495 and 527 ℃. The structures of these resultant polymers were confirmed by FT-IR and 1^H NMR. Moreover, the properties of poly（aryl ether nitrile）s including solubility and crystallinity were also studied.

Synthesis of Novel Poly(aryl ether amide)s Containing the Phthalazinone Moiety

Two novel heterocyclic diamine monomers: 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl] (2H)phthalazin-1-one and 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4-aminophenoxy)-3,5-dimethylphenyl](2H)phthalazin-1-one were successfully synthesized from readily available heterocyclic bisphenol-like monomers in two steps in high yield. A series of novel poly(aryl ether amide)s containing the phthalazinone moiety were successfully prepared by the direct polymerization of the novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents.

Synthesis and characterization of novel poly(aryl ether sulfone ketone)s containing phthalazinone and biphenyl moieties

A novel series of poly（aryl ether sulfone ketone）s （PPESKs） containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures （Tg） and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction （WAXD）.

Characterization and tribological investigation of self-assembled trimethoxysilyl-functionalized poly(phthalazinone ether ketone)thin films on glass substrates

Trimethoxysilyl-functionalized PPEK（PKGS） films had been designed to serve as wear resistant coatings for silicon surfaces. These surface films were formed by a dip-coating technique applied to self-assembled monolayers（SAMs）.The formation and wetting behavior of PKGS films were characterized by means of contact angle measurement.The friction coefficient of the film prepared is very low（about 0.1）,and the anti-wear behavior is good,with a lack of failure after sliding over 1800 s.

Synthesis and Characterization of Poly(ether imide)s Containing m-Methyl and Phthalazinone Moieties

Three novel poly(ether imide)s were synthesized by one-step solution polymerization from 2-(3, 4-dicarboxyl-N-phenyl)-4-(3, 4-dicarboxyl-phenoxyl-4-(2-methyl)-phenyl)-2, 3- phthal-azin-1-one dianhydride and three amines, and characterized. The polymers show good solubility and thermal properties.

Synthesis and Characterization of Poly (ether imide)s Containing Phthalazinone and Isopropyl Moieties

A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step solution condensation polymerization in nr-cresol. The polymer was characterized by FTIR, NMR, molecular weights, glass transition temperature, thermal degradation temperature and WAXD.

Synthesis and characterization of trimethoxysilyl-functionalized poly(phthalazinone ether ketone)

A novel alkoxysilyl-functionalized poly(phthalazinone ether ketone) (PPEK) was prepared for the boundary lubricant application in micro-electro-mechanical system (MEMS). The synthesis of functionalized PPEK was started from the hydroxylation of PPEK, then following with the corresponding ring-opening reaction of 3-glycidoxypropyltrimethoxysilane (GPTMS). The structures of the functional PPEK were confirmed by FTIR, 1H NMR, 29Si NMR, and UV–vis spectrum.

SYNTHESIS AND CHARACTERIZATION OF POLY(PHTHALAZINONE ETHER PHOSPHINE OXIDE)S BY N-C COUPLING REACTION

Based on several unsymmetrical, twist, noncoplanar phthalazinone-containing monomers 2a-2e and an active bis（4-fluorophenyl）phenyl phosphine oxide （BFPPO） monomer, a series of novel poly（phthalazinone ether phosphine oxide）s （PPEPO） was synthesized by anhydrous K2CO3 mediated N-C coupling reaction in DMAc. The polymers exhibited good thermal properties with Tgs ranging from 267℃ to 306℃ and 5% weight loss temperatures in nitrogen higher than 430℃, together with high char yield upon prolonged heating at 800℃ （35%-56%）. Moreover, the polymers were readily soluble in common organic solvents, such as N-methyl-2-pyrrolidone, chloroform and m-cresol. These polymers had inherent viscosities in the range of 0.45-0.72 dL/g and could be cast into flexible and colorless films by spin coating or casting approach.

Synthesis and properties of soluble poly（aryl ether sulfone ether ketone）s copolymers containing pendant methyl groups

A series of Poly（arly ether sulfone ether ketone）s containing pendant methyl groups were synthesized by the reaction of 4,4＇-[sulfonylbis （1,4-phenylene）dioxy] dibenzoyl chloride （SODBC） with 4,4＇- diphenoxy diphenylsulfone （DPODPS）, 4,4＇- di（2-methylphenoxy） diphenylsulfone （o-Me-DPODPS）, 4,4＇- di（3-methylphenoxy） diphenylsulfone （m-Me-DPODPS）, 4,4＇- di （2,6-bimethylphenoxy） biphenylsulfone（o-Me2-DPODPS） respectively, in a mixture of 1,2-dichloroethane （DCE） and N-methylpyrrolidone （NMP）. These reactions were catalyzed by anhydrous aluminum chloride （AlCl）. The characteristic of copolymers were studied by means of advanced analytical techniques such as FT-IR,1H-NMR, DSC, TGA and WAXD. The results show glass transition temperature （Tg） in the range of 193-206℃, thermally stable in excess of 434℃ and excellent solubility in polar solvents. Methyl-substituted Poly（aryl ether sulfone ketone）s had higher glass transition temperatures, lower initial decomposition temperatures than the unsubstituted ones.

Synthesis and characterization of novel poly(aryl ether)s containing naphthyl moieties

Two poly（aryl ether）s containing naphthyl moieties were prepared from bis（3,5-dimethyl-4-hydroxyphenyl）naphthyl methane （monomer 1） via nucleophilic aromatic substitution polycondensation with bis（4-fluorophenyl） ketone and bis（4-fluorophenyl） sulfone. The structures of these polymers were confirmed by 1H NMR. The Mn values of the two polymers were 96,200 and 88,600, respectively. The polymers exhibited good thermal stabilities with 5% mass loss at T 〉 400 and high glass-transition temperature （Ts） of T 〉 250 ℃. Moreover, the resultant polymers were amorphous determined by wide angle X-ray diffraction （WAXD）. ？2009 Lei Wang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All fights reserved.

SYNTHESIS AND CRYSTALLIZATION BEHAVIOR OF POLY(ETHER ETHER KETONE ETHER KETONE)(PEEKEK)

In this paper, the synthesis and crystallization behavior of poly(ether ether ketone ether ketone) (PEEKEK) are reported. PEEKEK was prepared from 4,4'-bis(p-fluorobenzoyl) diphenyl ether (4,4'-FBDE) and hydroquinone along the nucleophilic substitution route. The thermal properties were investigated by using DSC and TGA. The crystallization behavior of PEEKEK under several conditions, i.e., crystallization from the molten state (melt crystallization), crystallization from a quenched sample (cold crystallization) and crystallization induced by exposing glassy sample to methylene chloride (solvent-induced crystallization) has also been investigated. The results show that crystallization of PEEKEK could be induced by the above methods, and no polymorphism was found. The differences in the crystallization of PEEKEK induced by the above methods are seen in their degree of crystallinity.

Synthesis of novel poly(aryl ether amide)s containing the phthalazinone moiety

Two novel heterocylic diamine monomers: l,2-dihydro-2-(4-aminophenyl)-4-4-(4-aminophenoxy) phenyl]-(2H)-phthalazin-l-one and 1,2-Dihydro-2-( 4-aminophenyl )-4-[4-(4-aminophenoxy-3, 5-dimethylphenyl]-(2H)-phthalazin-1-one were successfully synthesized using readily available heterocyclic bisphenol-like monomers through two steps in high yield. A series of novel poly(aryl ether amide)s containing the phthalazinone moiety with inherent viscosities of 1.16–1.67 dL/g were prepared by the direct polymerization of the novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in a variety of solvents such as N,N -dimethylformamide (DMF), N,N-dimethylacetamide (DMAc), dimethylsulfoxide ( DMSO ), N-methyl-2-pyrrolidinone (NMP), and pyridine. The polymers had high glass transition temperatures ( Tg) in the 291–329°C range.

SYNTHESIS AND PROPERTIES OF SULFONATED POLY(ETHER KETONE)S CONTAINING 3,5-DIMETHYL PHTHALAZINONE MOIETIES AS PROTON EXCHANGE MEMBRANE MATERIALS

Sulfonated poly（ether ketone）s containing 3,5-dimethyl phthalazinone moieties （SPPEK-DMs） with different degrees of sulfonation （DS） were synthesized via direct polycondensation from 4-（3,5-dimethyl-4-hydroxyphenyl）-2,3- phthalazinone, 4,4＇-difluorobenzophenone and 3,3＇-disulfonate-4,4＇-difluorobenzophenone. The chemical structure of SPPEK-DMs was characterized by FTIR and 1H-NMR. Thermal stability of SPPEK-DMs was characterized by the thermogravimetric analysis. The membranes prepared from SPPEK-DMs exhibited ion exchange capacities （IEC） ranging from 0.93 mmol.g-1 to 1.86 mmol.g-1. Water uptake, swelling, oxidative stability and methanol permeability of SPPEK- DMs membranes were investigated. SPPEK-DMs membranes exhibited high oxidative stability. The methanol permeability values of SPPEK-DMs membranes were in the range 5.15× 10^-8-6.61×10^-7 cm^2.s-1, which was much lower than those of Nafion117. The proton conductivity of SPPEK-DM40 membranes was 1.1 ×10^-2 S.cm^-1 at 70℃.

SYNTHESIS AND CHARACTERIZATION OF POLY(PHTHALAZINONE BIPHENYL ETHER SULFONE KETONE)S FROM 4,4'-DICHLOROBENZOPHENONE

A series ofpoly（aryl ether sulfone ketone）s containing phthalazinone and biphenyl moieties were synthesized by aromatic nucleophilic displacement polycondensation of 4-（4-hydroxylphenyl）（2H）-phthalazin-l-one （DHPZ）, 4,4＇- dichlorobenzophenone （DCB）, 4,4＇-dichlorodiphenyl sulfone （DCS） and 4,4＇-biphenol （BP） in different molar ratios. The obtained copolymers were characterized by different instrumental techniques （FTIR, TGA, DSC, WAXD, etc.）. The inherent viscosities of these polymers were in the range of 0.43-0.56 dL g^-1. They were amorphous and had good solubility in polar aprotic organic solvents. The copolymers exhibited high glass transition temperatures （TgS） between 225℃ and 256℃and excellent thermal stability up to 517-526℃ （thermal decomposition temperatures for 5% weight loss, Td, 5%） in nitrogen. The tensile strength and elongation at break of the polymers ranged from 63 MPa to 71 MPa and from 18% to 21%, respectively. The processability of the material was effectively improved by the introduction of biphenyl group into polymer backbone.

含醚键双二氮杂萘酮结构聚芳醚腈砜的合成与性能

文中以含醚键双二氮杂萘酮结构化合物4,4’-双(氧基(1,4-苯撑))-双二氮杂萘-1(2H)酮-二苯醚(OBDHPZ)为类双酚单体,与4,4’-二氟二苯砜(DFS)和2,6’-二氟苯腈(DFBN)进行高温溶液缩聚反应,通过调节聚合物分子主链中砜基和氰基等的含量,合成了一系列不同腈砜比的含醚键双二氮杂萘酮联苯结构聚芳醚腈砜树脂(PBPENS),其N-甲基吡咯烷酮(NMP)溶液在25℃的特性黏度为0.63~0.90 dL/g。通过红外光谱、核磁共振氢谱和广角X射线衍射仪表征了所合成聚芳醚腈砜的结构;通过差示扫描量热仪和热失重分析仪分析了该类聚芳醚腈砜的热性能,聚合物的玻璃化转变温度(Tg)在322~325℃,5%热失重温度(Td5%)在485~500℃。该类聚合物在常温时可溶解于NMP、N,N-二甲基乙酰胺(DMAc)、氯仿等极性非质子有机溶剂;采用溶液浇筑法制备了含醚键双二氮杂萘酮结构聚芳醚腈砜薄膜,薄膜的拉伸强度可以达到56~65 MPa。

纳米SiO_2填充杂萘联苯聚醚酮复合材料的性能研究

采用悬浮液共混法制备了纳米SiO2 填充新型含二氮杂萘酮结构聚芳醚酮(PPEK)复合材料,并对其力学性能、摩擦性能和热学性能进行了研究。结果表明:当纳米SiO2 含量为1%时,复合材料的综合力学性能最佳;纳米SiO2 的加入,使得复合材料的摩擦性能比纯树脂有了明显提高,当纳米SiO2 含量达到7%时,摩擦磨损综合性能最好,且在大载荷下纳米SiO2 更能有效改善复合材料的摩擦磨损性能。DSC测试表明, 7%纳米SiO2 填充PPEK的玻璃化转变温度与纯PPEK相当。

SYNTHESIS AND CHARACTERIZATION OF BLUE LIGHT-EMITTING POLY(ARYL ETHER)S CONTAINING PYRIMIDINE-INCORPORATED OLIGOFLUORENE PENDANTS WITH BIPOLAR FEATURE

Novel blue light-emitting poly（aryl ether）s comprising of bipolar oligofluorene pendants as chromophores have been designed and synthesized, in which pyrimidine and arylamine moieties are utilized as the electron acceptor and electron donor, respectively. Through varying n bridge length from monofluorene to bifluorene and end-cappers from hydrogen to carbazole and diphenylamine, the emission color of the resulting polymers covers from deep blue to greenish blue, and their HOMO and LUMO levels can be modulated to facilitate charge injection to improve the device performance. Polymer light- emitting diodes （PLEDs） are fabricated with the device structure of ITO/poly（3,4-ethylenedioxythiophene）：poly（styrene sulfonic acid） （PEDOT：PSS） （50 nm）/polymer （80 nm）/Ca （10 nm）/Al （200 nm）. Among these polymers, P2Cz5F-Py with bifluorene bridge and carbazole end-capper shows excellent trade-off between the efficiency and emission wavelength, having a peak luminous efficiency as high as 1.26 cd/A and Commission Internationale de L＇Eclairage （CIE） coordinates of （0.17,0.17）.

Poly(aryl ether nitrile)s containing flexible side-chain-type quaternary phosphonium cations as anion exchange membranes

In order to effectively improve the properties of anion exchange membrane(AEM)materials,a series of novel poly(aryl ether nitrile)s with flexible side-chain-type quaternary phosphonium cations(PAEN-TPP-x)were designed and prepared on the basis of considering the influences of polymer backbone,cationic group species and the connection way between the cations and polymer chains.The synthetic method,structure and ion-exchange capacity,water absorption,swelling,hydroxide conductivity and alkaline stability of the obtained AEMs were studied.A comparative study with other reported AEMs was also performed for further exploration of the relationship between the structure and properties.These AEMs with flexible side-chain-type quaternary phosphonium cations displayed good comprehensive properties.Their water uptakes and swelling ratios were in the range of 11.6%–22.7%and 4.4%–7.8%at 60℃,respectively.They had hydroxide conductivity in the range of 28.6–45.8 mS cm^-1 at 60℃.Moreover,these AEMs also exhibited improved alkaline stability,and the hydroxide conductivity for PAEN-TPP-0.35 could remain 82.1%and 80.6%of its initial value at 60 and 90℃in 2 mol L^-1 NaOH solution for480 h,respectively.

Ionic liquids as green reaction media for synthesis of poly(aryl ether ketone)s

Poly(aryl ether ketone)s (PAEKs) were successfully synthesized via nucleophilic aromatic substitution (SNAR) mechanism, using ionic liquids as green reaction media. The influence of various reaction parameters including monomer concentration, dehydration time, polymerization temperature and duration, IL's cations and anions nature, upon PAEKs molecular weight was investigated. In addition, the peculiarities of hydrogen-bonding ability of ILs were investigated. The interaction of 2,2-bis(4-hydroxyphenyl) propane (bisphenol A) with ILs has a strong influence on PAEKs synthesis. Various moderate molecular weight PAEKs have been obtained in high yields with molecular weights ranging from 10000 to 18000g mol-1.

Allyl phthalazinone synthesis,polymerization and polymer properties

A phthalazinone monomer with an allyl group, i.e. 4-（3-allyl-4-hydroxyphenyl）phthalazin-1（2H）-one, was synthesized and then copolymerized with 4-（4-hydroxylphenyl）（2H）-phthalazin-1-one and 2,6- diflurobenzonitrile by means of aromatic nucleophilic polycondensation to provide a series of crosslinkable poly（aryl ether nitrile）s. The virgin copolymers exhibited good solubility in polar organic solvents with relative high molecular weights （Mw： 45,130-58,403, inherent viscosities： 0.58-0.75 dL/ g）. After cross-linking, the thermal stability and solvent resistance of the polymer increased.