PREPARATION OF LOW MOLECULAR WEIGHT POLY(GLYCIDYL METHACRYLATE) BY PHOTOPOLYMERIZATION

Low molecular weight poly（glycidyl methacrylate）s （PGMAs） were prepared by photopolymerization in ethyl acetate, with benzophenone （BP） as photoinitiator, and triethylamine （TEA） as hydrogen donor. The existence of semipinacol dormant end groups in PGMA was confirmed by FT-IR and ^1H-NMR, and the content of the semipinacol dormant groups was determined quantitatively by ^1H-NMR measurement. The effects of various thctors, such as reaction time, BP concentration and monomer concentration on the synthesis of the polymers were investigated systematically. The molecular weights of the polymers were also investigated with GPC. It is shown that increasing BP concentration and decreasing irradiation time and monomer concentration led to a significant decrease of the molecular weights.

Preparation and Thermo-Responsive Properties of Poly(Oligo(Ethylene Glycol)Methacrylate)Copolymers with Hydroxy-Terminated Side Chain

Thermo-responsive random copolymers,poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-(ethylene glycol)methyl ether methacrylate)(P(EO_(2)-co-EO_(4/5)))and poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-ethylene glycol methacrylate(P(EO2-co-EG4/5))are synthesized via atom transfer radical polymerization(ATRP).The successful synthesis and the narrow polydispersity index(PDI)of two copolymers are indicated by 1H nuclear magnetic resonance(1H-NMR)and gel permeation chromatography(GPC)analyses.The transition behaviors of polymers in the aqueous solution are demonstrated by changes in turbidity and particle sizes.The transition behavior of P(EO2-co-EG4/5)is found to be milder than that of P(EO2-co-EO4/5).Moreover,the presence of hydrogen bonds without thermo-responsive properties established by hydroxyl groups in the end-side chain of P(EO_(2)-co-EG_(4/5))hinders the dehydration at the transition temperature(TT).Attenuated total reflection Fourier transform infrared spectrometry(ATR-FTIR)analysis along with contact angle measurements reveals that both P(EO_(2)-co-EO_(4/5))and P(EO_(2)-co-EG_(4/5))films undergo phase transitions from hydrophilicity to hydrophobicity above TT.By examining the swelling and collapse behaviors of the polymer films during phase transitions,it can be concluded that the end hydroxyl groups may establish hydrogen bonds with neighboring ether groups within the films,which remain intact throughout the phase transition process due to their strong bonding interactions.This leads to an increase in steric hindrance within swollen films thereby impeding dehydration processes and inducing hysteresis during phase transitions.

MONOMER REACTIVITY RATIO AND THERMAL PERFORMANCE OFα-METHYL STYRENE AND GLYCIDYL METHACRYLATE COPOLYMERS

Synthesis and characterization of the copolymers （PAG） of α-methyl styrene （AMS） and glycidyl methacrylate （GMA） are presented. The copolymers of PAG were characterized by gel permeation chromatography （GPC）, Fourier transform infrared spectroscopy （FTIR）, nuclear magnetic resonance （^1H-NMR） and thermogravimetery （TG）. Based on the copolymer compositions determined by ^1H-NMR, the reactivity ratios of AMS and GMA were found to be 0.105 ± 0.012 and 0.883 ± 0.046 respectively by Kelen-Tudos method. TG revealed that thermal stability of the copolymers decreased with increasing the AMS content in the copolymers, which indicated that the degradation was mainly caused by the chain scission of AMS-containing structures. Under heating, the copolymers depolymerize at their weak bonds and form chain radicals, which could further initiate other chemical reactions.

Poly(Glycidyl Methacrylates)-grafted Zinc Oxide Nanowire by Surface-initiated Atom Transfer Radical Polymerization

Poly(glycidyl methacrylates)(PGMA) was grafted from zinc oxide(ZnO) nanowires via surface-initiated atom transfer radical polymerization(SI-ATRP) technique.Firstly,the ZnO nanowires were synthesized by the one-pot hydrothermal technique.Subsequently,the ZnO was functionalized with 3-aminopropyl triethoxysilane,which was converted to macroinitiator by the esterification of them with 2-bromopropionyl bromide.PGMA grafted ZnO nanowires(PGMA-ZnO) were then synthesized in an ATRP of the GMA with CuCl/2,2`-bipyridine as the catalyst system.Kinetics studies revealed an approximate linear increase in weight of polymer with reaction time,indicating that the polymerization process owned some "living" character.The structure and composition of PGMA-ZnO were characterized with scanning electron microscope(SEM),energy-dispersive X-ray(EDX) spectrometer,fourier transform infrared spectroscopy(FT-IR) and thermogravimetric analysis(TGA).

Scavenging Properties of the Polyamine Functionalized Gels Based on the Glycidyl Methacrylate Terpolymers

Scavenging abilities of the ethylenediamine, diethylenetriamine and tris(2-aminoethyl)amine functionalized resins derived from the low cross-linked glycidyl methacrylate-styrene gels in relation to the selected transition metal ions and organic (acid chlorides) electrophiles were explored. The synergetic effects of the solvents were found for the metal ion uptake. In this case a pair of solvents capable simultaneously to swell the hydrophobic core of the resins and interact with the polar amine groups turned out to be a more effective medium for activation of the nucleophilic functionalities of the resins. The resin with ethylenediamine moieties proved to be effective in scavenging acyl chlorides from methylene chloride as well. However, it did not provide complete removing sulphonyl chlorides from the solutions. These organic electrophiles were removed effectively by the resins bearing tris(2-aminoethyl)amine functionalities.

Polybutylacrylate/poly(methyl methacrylate) Core-Shell Elastic Particles as Epoxy Resin Toughener: Part I Design and Preparation

Polybutylacrylate (PBA)/poly(methyl methacrylate) (PMMA) core-shell elastic particles (CSEP), whose rubbery core diameter ranged from 0.08 μm to 1.38μm, were synthesized by using conventional emulsion polymerization, multi-step emulsion polymerization, and soapless polymerization. Allyl methacylate (ALMA) and ethylene glycol dimethacrylate (EGDMA) were selected as crosslinking reagents for core polymerization. Methacrylic acid (MAA) was used as functional co-monomer with methyl methacrylate as shell component. The content of vinyl groups in PBA rubbery core increased with the amount of crosslinking reagents. The core-shell ratio affected great on the morphology of the complex particles. Furthermore, the amounts of carboxyl on the surface of core-shell particles, copolymerized with acrylic acid, were determined by potentiometric titration. Results showed that methylacrylic acid was distributed mostly on the surface of particles.

SYNTHETIC STUDIES ON BLOOD COMPATIBLE BIOMATERIALSⅡ. SYNTHESIS OF POLY(ETHYLENEGLYCOL MONOMETHYLLTHER ) METHACRYLATE AND ANTITHROMBOGENICITY OF ITS COPOLYMERS

Poly （ethyleneglycol monomethylether） methacrylate （PEGMM）was synthesized by means of the reaction of methacrylyl chloride with sodium monomethylpolyethyleneglycoxide and was characterized by FTIR,;H-NMR,and ultraviolet spectrometries. A series of poly （vinyl alcohol）-graft-PEGMM （PVA-g-PEGMM ）and methyl methacrylate-PEGMM copolymer （PMMA-PEGMM） were prepared and tested for antithrombogenicity in vitro. The results indicate that the antithrombogenicity of the copolymers basically increases with the increasing of the DP of polyoxyethylene （POE） chain and tends to a plateau after the DP around 114,i.e. the long chain structure of POE is favourable to the antithrombogenicityof its copolymers ;moreover, the extent of the improvement ofantithrombogenicity also relates to the PEGMM content of the copolymers and the kind of the matrix that the POE chains are located on. These results are consistent with the anticipation of the hypothesis of maintaining proteins normal conformations for blood compatible bioraaterials.

Genotoxic and Nongenotoxic Effects of Glycidyl Methacrylate on Human Lung Fibroblast Cells

Objective To evaluate the genotoxic and nongenotoxic effects of short-term exposure to glycidyl mathacrylate (GMA) on human lung fibroblast cells (2BS cells) in vitro. Methods DNA strand breakage was determined by single cell gel electrophoresis, and DNA ladder formation assay and flow cytometric analysis were carried out to detect apoptic responses of cells to GMA exposure. The HPRT gene mutation assay was used to evaluate the mutagenicity, and the effect of GMA on gap junctional intercellular communication (GJIC) in the exposed cells was examined with the scrape loading/dye transfer technique. The ability of GMA to transform 2BS cells was also tested by an in vitro cell transformation assay. Results Exposure to GMA resulted in a dose-dependent increase in DNA strand breaks but not apoptic responses. GMA was also shown to significantly induce HPRT gene mutations and morphological transformation in 2BS cells in vitro. In contrast, GMA produced a concentration-dependent inhibition of GJIC. Conclusions GMA elicits both genotoxic and nongenotoxic effects on 2BS cells in vitro. The induction of DNA damage and gene mutations and inhibition of GJIC by GMA may casually contribute to GMA-induced cell transformation.

Experimental Study on Malignant Transformation of Human Bronchial Epithelial Cells Induced by Glycidyl Methacrylate and Analysis on its Methylation

Objective To establish the model of human bronchial epithelial cells （16HBE） malignant transformation induced by glycidyl methacrylate （GMA） and define the different methylation genes at different stages. Methods DNA was extracted at different 16HBE malignant phases and methylation at different stages were detected using Methylation chip of Promoter Microarray Methylation＇. Methylation-specific PCR （MSP） was methylation status of some genes, and then compared with the control groups. changes of genes DNA ＇NimbleGen HG18 CpG used to observe the Results The result showed that GMA induced 16HBE morphorlogical transformation at the dose of 8 I^g/mL, and cell exposed to GMA had 1 374 genes in protophase, 825 genes in metaphase, 1 149 genes in anaphase, respectively; 30 genes are all methylation in the 3 stages; 318 genes in protophase but not in metaphase and anaphase; 272 genes in metaphase but not in protophase and anaphase; 683 genes in anaphase but not in metaphase and protophase; 73 genes in protophase and metaphase but not in anaphase; 67 genes in protophase and anaphase but not in metaphase; 59 genes in metaphase and anaphase but not in protophase. Conclusion The pattern of DNA methylation could change in the process of 16HBE induced by GMA.

Genes Differentially Expressed in Human Lung Fibroblast Cells Transformed by Glycidyl Methacrylate

Objective To define the differences in gene expression patterns between glycidyl methacrylate (GMA)-transformed human lung fibroblast cells (2BS cells) and controls. Methods The mRNA differential display polymerase chain reaction (DD-PCR) technique was used. cDNAs were synthesized by reverse transcription and amplified by PCR using 30 primer combinations. After being screened by dot blot analysis, differentially expressed cDNAs were cloned, sequenced and confirmed by Northern blot analysis. Results Eighteen differentially expressed cDNAs were cloned and sequenced, of which 17 were highly homologous to known genes (homology = 89%-100%) and one was an unknown gene. Northern blot analysis confirmed that eight genes encoding human zinc finger protein 217 (ZNF217), mixed-lineage kinase 3 (MLK-3), ribosomal protein (RP) L15, RPL41, RPS16, TBX3, stanniocalcin 2 (STC2) and mouse ubiquitin conjugating enzyme (UBC), respectively, were up-regulated, and three genes including human transforming growth factor b inducible gene (Betaig-h3), a-1,2-mannosidase 1A2 (MAN 1A2) gene and an unknown gene were down-regulated in the GMA-transformed cells. Conclusion Analysis of the potential function of these genes suggest that they may be possibly linked to a variety of cellular processes such as transcription, signal transduction, protein synthesis and growth, and that their differential expression could contribute to the GMA-induced neoplastic transformation.

Studies of the Genotoxicity of Glycidyl Methacrylate (GMA)

The following experiments were conducted to evaluate the genotoxic effects of GMA (glycidyl methacrylale) on mammalian and human cells.(1) Using the absorption spectrum shift method in vitro, we observed that the maximums of calf thymus DNA and GMA were shifted toward longer wavelengths (a change of more than 15nm) and the absorbance decreased after incubation at room temperature for 15min or more.The result indicates that binding of DNA and GMA had occurred.The binding force is strong, not affected by the addition of concentrated sodium chloride solution, and only slightly decreased by the addition of 8 M urea solution.Therefore the bond between DNA and GMA might be covalent.(2) In cell cultures, unscheduled DNA synthesis (UDS) in human and/or rat lymphocyte was induced and DNA semiconserva-tive replication was inhibited by GMA at concentrations of less than 5.2 mM.(3) Sperm abnormality tests and assays of UDS in germ cells of male mice were conducted to study the in vivo genotoxicity of GMA.The results revealed that GMA could damage DNA, increase sperm abnormality frequency, and reduce the number of sperm cells, 1990 Academic Press.Inc.

AN ATOMIC FORCE MICROSCOPY STUDY ON THE AGGREGATION OF ISOTACTIC POLY(METHYL METHACRYLATE)

Aggregation process of isotactic poly（methyl methacrylate） （i-PMMA） has been studied extensively for many years, and considerable progress has been made in both experimental and theoretical studies. They are, however, seldom sustained by real-space observations of the underlying morphology. In this paper, the aggregation process of i-PMMA in concentrated acetone solutions and the fractal structure of the resulting three-dimensional clusters were characterized on the basis of real-space AFM observations of their two-dimensional projection. It was found that spherical multiple-chain particles formed upon collapse and aggregation of the involving chains as a whole during quenching the solution to room temperature. By keeping the solution at room temperature, the initially formed particles stick together upon contact to form larger particles through reassembling very slowly. The succeeding collision of the enlarged spherical particles leads to the formation of small clusters. These newly formed small clusters grow when they meet with other clusters or single Brownian particles. This leads to the formation of large clusters with fractal dimension of 1.95 ± 0.05, which suggest a reaction-limited cluster aggregation of i-PMMA in a concentrated acetone solution. This is in accordance with the conclusion obtained by light scattering measurements.

PREPARATION OF POLY(METHYL METHACRYLATE)/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly（methyl methacrylate） （LDHs/PMMA） nanocomposite was prepared by in situ solution polymerization of methyl methacrylate （MMA） in the presence of 4-vinylbenzenesulfonate intercalated LDHs（MgAl-VBS LDHs）. MgAl-VBS LDHs was prepared by the ion exchange method, and the structure and composition of the MgAl-VBS LDHs were determined by X-ray diffraction （XRD）, infrared spectroscopy and elemental analysis. XRD and transmission electron microscopy （TEM） were employed to examine the structure of LDHs/PMMA nanocomposite. It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix. The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.

Synthesis of Comblike Poly(methyl methacrylate) by Atom Transfer Radical Polymerization with Poly(ethyl 2-bromoacrylate) as Macroinitiator

Comblike poly(methyl methacrylate) was synthesized by atom transfer radical polymerization of methyl methacrylate with poly(ethyl 2-bromoacrylate) as a macroinitiator, which was prepared by conventional free radical polymerization of ethyl 2-bromoacrylate. The obtained comblike polymers were characterized by GPC and 1H NMR.

Effect of Low-Pressure Nitrogen DC Plasma Treatment on the Surface Properties of Biaxially Oriented Polypropylene, Poly (Methyl Methacrylate) and Polyvinyl Chloride Films

In this study, commercial biaxially oriented polypropylene （BOPP）, polyvinyl chlo- ride （PVC） and poly （methyl methacrylate） （PMMA） films were treated with nitrogen plasma over different exposure times in a Pyrex tube surrounded by a DC variable magnetic field. The chemi- cal changes that appeared on the surface of the samples were investigated using Fourier transform infrared （FT4R） spectroscopy and attenuated total reflectance Fourier transform infrared （ATR- FTIR） spectroscopy after treatment for 2 min, 4 min and 6 rain in a nitrogen plasma chamber. Effects of the plasma treatment on the surface topographies and contact angles of the untreated and plasma treated films were also analyzed by atomic force microscopy （AFM） and a contact angle measuring system. The results show that the plasma treated films become more hydrophilic with an enhanced wettability due to the formation of some new polar groups on the surface of the treated films. Moreover, at higher exposure times, the total surface energy in all treated films increased while a reduction in contact angle occurred. The behavior of surface roughness in each sample was completely different at higher exposure times.

Experimental and density functional theory computational evaluation of poly(N-vinyl caprolactam-co-butyl methacrylate) kinetic hydrate inhibitors

Natural gas hydrate inhibitor has been serving the oil and gas industry for many years. The development and search for new inhibitors remain the focus of research. In this study, the solution polymerization method was employed to prepare poly(N-vinyl caprolactam-co-butyl methacrylate)(P(VCap-BMA)), as a new kinetic hydrate inhibitor(KHI). The inhibition properties of P(VCap-BMA) were investigated by tetrahydrofuran(THF) hydrate testing and natural gas hydrate forming and compared with the commercial KHIs. The experiment showed that PVCap performed better than copolymer P(VCap-BMA). However,low doses of methanol or ethylene glycol are compounded with KHIs. The compounding inhibitors show a synergistic inhibitory effect. More interesting is the P(VCap-BMA)-methanol system has a better inhibitory effect than the PVCap-methanol system. 1% P(VCap-BMA) + 5% methanol presented the best inhibiting performance at subcooling 10.3 °C, the induction time of natural gas hydrate was 445 min.Finally, the interaction between water and several dimeric inhibitors compared by natural bond orbital(NBO) analyses and density functional theory(DFT) indicated that inhibitor molecules were able to form the hydrogen bond with the water molecules, which result in gas hydrate inhibition. These exciting properties make the P(VCap-BMA) compound hydrate inhibitor promising candidates for numerous applications in the petrochemical industry.

SYNTHESIS AND CHARACTERIZATION OF FOUR-ARMED BLOCK POLY(STYRENE-b-p-NITROPHENYL METHACRYLATE)PREPARED BY THE ATRP METHOD

A novel tetrafunctional initiator, C [CH_2O (CH_2)_3 OOCCH(Br)CH_3]_4 (1), was synthesized through the reaction oftetraol with α-bromopropionyl chloride, and then was used as initiator of atom transfer radical polymerization (ATRP) in thepreparation of 4-armed polystyrene (PSt) with narrow polydispersity. The structure, molecular weight and molecular weightdistribution (MWD) of each arm were studied by ~1H-NMR and GPC data of hydrolyzed products of the 4-armed PSt. TheATRP of St using 1/CuBr/bpy as initiator system is of 'living' character based on the following evidence: narrow MWD,constant concentration of chain radical during the polymerization, control of molecular weight by the molar ratio of monomerconsumed to 1. The 4-armed poly(St-b-p-nitrophenyl methacrylate) [poly(St-b-NPMA)] was prepared by the ATRP ofNPMA using 4-armed PSt with terminal bromine as the initiator, and characterized by FT-IR, ~1H-NMR spectra and GPCcurves. The micelles with PSt as core, and PNPMA as shell were formed by dropping DMSO into a solution of 4-armedpoly(St-b-NPMA) in DMF, as proved by laser light scatter (LLS) method.

Effect of Methyl Methacrylate– Acrylonitrile -Butadiene–Styrene (MABS) on the Mechanical and Thermal Properties of Poly (Methyl Methacrylate) (PMMA)-Fly Ash Cenospheres (FAC) Filled Composites

With the advent of plastics and the wide range of fillers that are available have made modifications as precise as the tailored resins themselves. To modify the properties of polymer either by using fillers or by preparation of polymer blends gives rise to new materials with tailored properties. More complex, three-component systems, obtained by the addition of polymeric modifier to polymer filled composites may be of interest. Use of Fly ash cenospheres is very attractive because it is inexpensive and its use can reduce the environmental pollution to a significant extent. In the present study, Poly (Methyl Methacrylate) (PMMA)-Fly ash cenospheres composites were prepared using extrusion followed by Injection molding. The effect of matrix modification with Methyl methacrylate– acrylonitrile -butadiene–styrene (MABS) on the performance of PMMA- Fly ash cenospheres compositions was also, studied. It was found that with the addition of Fly ash cenospheres particulate as filler in PMMA showed marginal reduction in Tensile Strength, % Elongation and Impact strength and improvement in Flexural Strength, Heat Deflection Temperature and Vicat Softening Point. Compared with PMMA-cenospheres composites, the notched Impact Strength of the PMMA/MABS/cenospheres composites showed marginal enhancement in values at higher loading of cenospheres. The optimum performances in mechanical and thermal properties were obtained when the ratio of MABS to cenospheres was 1:2.

Synthesis and Characterization of Novel Hybrid Poly(methyl methacrylate)/Iron Nanowires for Potential Hyperthemia Therapy

Externally applied magnetic fields have been used in this study to fabricate bamboo-like iron nanowires with or without a layer of Poly(methyl methacrylate) (PMMA). The hybrid PMMA/Fe nanowires were synthesized via hard X-ray synchrotron radiation polymerization with various treatment parameters. The results of XRD show that an oxide layer formed on the surface of the iron nanowires. The Fe2O3 and Fe3O4 phases coexist in the iron nanowires without X-ray irradiation. After X-ray irradiation, the Fe2O3 phase transformed into Fe3O4, which stabilized the iron nanowires. The results of XAS proved this phase transformation. TGA analysis confirmed the thermal properties and solid contents in these specimens. Their ferromagnetic behaviors were examined by magnetic hysteresis measurement, which indicated that the magnetic and structural properties of the nanowires can be manipulated by irradiation treatment. This may lead to a novel synthesis for iron nanowires that can be used in high thermal efficiency hyperthermia therapy.

Analysis of the Phenotype and the Restriction Enzyme Mapping Level of Mutations Induced by the New Mutagen Glycidyl Methacrylate

Glycidyl methaerylate (GMA) is a recently recognized chemical mutagen. In order to explore the mutagenicity and mutagenic process of GMA, plasmid pBR322 was used for in vitro binding, mutant screening, and restriction enzyme mapping. The binding between GMA and DNA in vitro has been verified by means of a spectrophotometric method. When pBR322 and GMAbound pBR322 were used to transform Eschenchia coli HB101, the following results were obtained: (1) The transformation efficiency of GMA-bound pBR322 was much lower than that of pBR322 alone. (2) GMA-bound pBR322 induced phenotype changes in competent cells (i.e., tetracycline-resistance inactivation or ampicillin-resistance inactivation). There were two mutants of pBR322, Ap~RTc~S and Ap~STc~R, in the transformants and a deductive mutant Ap~STc~S in the nontranstormants. (3) All of the selected mutants were stable and heritable. (4) When restriction enzyme maps were used to analyze the mutant Ap~RTc~S, four of seven maps were changed. some sites were shifted to other resistant gene regions, for example, sites of Bgll, EcoRl, Ilindlll. Hinclll, etc., and there was a new recognition site for Hindi (252). We did not observe any DNA fragment insertion or deletion on any maps. Our results suggest that when GMA is covalently linked to the plasmid DNA, it gives rise to a premutagenic lesion of DNA that is converted in vivo into a point mutation. (C)1990 Academic Press, Inc.