Poly （ l- lactide- co-glycolide ） （ PLGA ） with different compositions was prepared using stannous octaoate as catalyst by bulk ring-opening copolymerization of l-lactide and glycolide. The structure and properti...Poly （ l- lactide- co-glycolide ） （ PLGA ） with different compositions was prepared using stannous octaoate as catalyst by bulk ring-opening copolymerization of l-lactide and glycolide. The structure and properties of the PLGA copolymers were cbaracterized by means of attenuated total reflectance-Fourier transform infrared （ATR-FTIR）, ^1H NMR, differential scanning calorimeter （ DSC and X-ray diffraction （XRD） methods, The experimented results indicate that the synthetic conditions and the composition of copolymers have art obvious influence on the structure of PLGA copolymers, The degradation rate of eopolymers increased with the increasing of the glycolide component in the copolymers.展开更多
Electrospun aligned ultrafine fibers of poly( lactide-coglycolide)( PLGA) can be used to construct biomimetic scaffolds for engineering those structurally anisotropic and dense tissues( e. g.,tendon,ligament,etc.). Bu...Electrospun aligned ultrafine fibers of poly( lactide-coglycolide)( PLGA) can be used to construct biomimetic scaffolds for engineering those structurally anisotropic and dense tissues( e. g.,tendon,ligament,etc.). But the acidic degradation products of the PLGA could result in p H decrease in the vicinity of the scaffolds,which may give rise to biocompatibility concerns. To address the noted problem, this study was designed to evaluate the p Hcompensation capacity of using Lysine( Lys) —a kind of basic amino acid on the acidic degradation products of PLGA. Ultrafine PLGA( 50∶ 50) fibers with 0,10%,20%,and 30% by weight of Lys loadings were prepared by a stable jet electrospinning( SJES)approach. The morphology,structure,and mechanical properties of the electrospun aligned fibrous mats of Lys-incorporated PLGA( 50∶50) were characterized by scanning electron microscope( SEM),Fourier transform infrared spectroscopy( FTIR),and tensile testing,respectively. Thereafter,the fibrous PLGA( 50 ∶50) scaffolds were subjected to degradation by being immersed in phosphate buffered saline( PBS,p H 6. 86) solution at 37 ℃ for 5weeks. Our results show that the formed Lys / PLGA composite ultrafine fibers have a well-aligned and uniform morphology with a fineness of ca. 1 #m in diameter. Introduction of Lys led to increased mechanical performance; that is,when the Lys loading is less than 30%,tensile strength and Young's modulus of the aligned Lys / PLGA fibers reached up to the impressive values of 84. 5 MPa and 2. 4 GPa,respectively. Degradation results show that the p H of the PLGA group fell to 5. 6 in 5 weeks while the p H of the Lys /PLGA groups with 10%,20%, and 30% of Lys loadings was maintained at 6. 3, 6. 5 and 6. 7, respectively. This work demonstrated that incorporation of Lys into electrospun PLGA fibers could be an effective approach in mediating the p H decrease caused by the acidic degradation products of the PLGA.展开更多
The purposes of this research were to synthesize and characterize star-shaped poly lactide-co-glycolide-β-cyclo-dextrin (PLGA-β-CD) copolymer by reacting L-lactide, glycolide and β-cyclodextrin in the presence of s...The purposes of this research were to synthesize and characterize star-shaped poly lactide-co-glycolide-β-cyclo-dextrin (PLGA-β-CD) copolymer by reacting L-lactide, glycolide and β-cyclodextrin in the presence of stannous octoate as a catalyst. The structure of PLGA-β-CD copolymer was confirmed with 1H-NMR, 13C-NMR and FT-IR spectra. Albumin as a model peptide drug was encapsulated within nanoparticles made of PLGA-β-CD with a modified double emulsion method. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) photomicrographs showed that the nanoparticles have the mean diameter within the range of 80 - 210 nm. Also they were almost spherical in shape. Effects of the experimental parameters, such as copolymer composition, copolymer concentration, and reaction temperature, on particular size and encapsulation efficiency were investigated.展开更多
Objective To investigate the effect of the implant composite of poly lactide-co-glycolide(PLGA)and bone mesenchymal stem cells (BMSCs) modified by basic fibroblast growth factor (bFGF) on injured spinal cord in rats.M...Objective To investigate the effect of the implant composite of poly lactide-co-glycolide(PLGA)and bone mesenchymal stem cells (BMSCs) modified by basic fibroblast growth factor (bFGF) on injured spinal cord in rats.Methods Two hundred and展开更多
文摘Poly （ l- lactide- co-glycolide ） （ PLGA ） with different compositions was prepared using stannous octaoate as catalyst by bulk ring-opening copolymerization of l-lactide and glycolide. The structure and properties of the PLGA copolymers were cbaracterized by means of attenuated total reflectance-Fourier transform infrared （ATR-FTIR）, ^1H NMR, differential scanning calorimeter （ DSC and X-ray diffraction （XRD） methods, The experimented results indicate that the synthetic conditions and the composition of copolymers have art obvious influence on the structure of PLGA copolymers, The degradation rate of eopolymers increased with the increasing of the glycolide component in the copolymers.
基金Fundamental Research Funds for the Central Universities,China(No.14D110519)Pujiang Talent Program Funded by theScience and Technology Commission of Shanghai M unicipality,China(No.10PJ1400200)National Natural Science Foundation of China(No.51073032)
文摘Electrospun aligned ultrafine fibers of poly( lactide-coglycolide)( PLGA) can be used to construct biomimetic scaffolds for engineering those structurally anisotropic and dense tissues( e. g.,tendon,ligament,etc.). But the acidic degradation products of the PLGA could result in p H decrease in the vicinity of the scaffolds,which may give rise to biocompatibility concerns. To address the noted problem, this study was designed to evaluate the p Hcompensation capacity of using Lysine( Lys) —a kind of basic amino acid on the acidic degradation products of PLGA. Ultrafine PLGA( 50∶ 50) fibers with 0,10%,20%,and 30% by weight of Lys loadings were prepared by a stable jet electrospinning( SJES)approach. The morphology,structure,and mechanical properties of the electrospun aligned fibrous mats of Lys-incorporated PLGA( 50∶50) were characterized by scanning electron microscope( SEM),Fourier transform infrared spectroscopy( FTIR),and tensile testing,respectively. Thereafter,the fibrous PLGA( 50 ∶50) scaffolds were subjected to degradation by being immersed in phosphate buffered saline( PBS,p H 6. 86) solution at 37 ℃ for 5weeks. Our results show that the formed Lys / PLGA composite ultrafine fibers have a well-aligned and uniform morphology with a fineness of ca. 1 #m in diameter. Introduction of Lys led to increased mechanical performance; that is,when the Lys loading is less than 30%,tensile strength and Young's modulus of the aligned Lys / PLGA fibers reached up to the impressive values of 84. 5 MPa and 2. 4 GPa,respectively. Degradation results show that the p H of the PLGA group fell to 5. 6 in 5 weeks while the p H of the Lys /PLGA groups with 10%,20%, and 30% of Lys loadings was maintained at 6. 3, 6. 5 and 6. 7, respectively. This work demonstrated that incorporation of Lys into electrospun PLGA fibers could be an effective approach in mediating the p H decrease caused by the acidic degradation products of the PLGA.
文摘The purposes of this research were to synthesize and characterize star-shaped poly lactide-co-glycolide-β-cyclo-dextrin (PLGA-β-CD) copolymer by reacting L-lactide, glycolide and β-cyclodextrin in the presence of stannous octoate as a catalyst. The structure of PLGA-β-CD copolymer was confirmed with 1H-NMR, 13C-NMR and FT-IR spectra. Albumin as a model peptide drug was encapsulated within nanoparticles made of PLGA-β-CD with a modified double emulsion method. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) photomicrographs showed that the nanoparticles have the mean diameter within the range of 80 - 210 nm. Also they were almost spherical in shape. Effects of the experimental parameters, such as copolymer composition, copolymer concentration, and reaction temperature, on particular size and encapsulation efficiency were investigated.
文摘Objective To investigate the effect of the implant composite of poly lactide-co-glycolide(PLGA)and bone mesenchymal stem cells (BMSCs) modified by basic fibroblast growth factor (bFGF) on injured spinal cord in rats.Methods Two hundred and
