Based on the oxygen isotopic compositions of 133 wolframite samples and 110 quartz sampleseollected from 30 tungsten ore deposits in south China,in conjunction with δD values and other data,thesc deposits can be divi...Based on the oxygen isotopic compositions of 133 wolframite samples and 110 quartz sampleseollected from 30 tungsten ore deposits in south China,in conjunction with δD values and other data,thesc deposits can be divided into four types. （l）Reequilibrated magmatic water-hydrothermal tungsten ore deposits. The δ18O values ofwolframite and quartz samples from this type of tungsten ore deposits are about +5-+12‰,respectively.The calculated δ（18）OH2O values of ore fluids in equilibrium with quartz are about+65‰,and the δDH2O values of fluid inclusions in quartz range from -40 to-70‰. （2）Meteoric water-hydrothermal tungsten ore deposits.Theδ18O values of wolframite in this type oftungsten dePosits are around-1‰. （3）Stratiform tungsten ore deposits.In these deposits,theδ18O values of quartz and wolframite areabout+17 and+3‰,respectively.It is considered that these stratiform tungsten ore deposits aregenetically related to submarine hot—spring activities。 （4）Complex mid-hydrothermal tungsten ore deposits.These tungsten ore deposits arecharacterized by multi-staged mineralization.The δ18O values of early wolframite are around+5‰,butof later wolframite are lower than+4‰,indicating that the early wolframite was precipitated fromreequilibrated magmatic water-hydrothermal solutions and the late one from the mixture ofhvdrothermal solutions with meteoric waters or mainly from meteoric waters, Based on the δ18O values of the coexisting quartz and wolframite and temperature data,twocalibration equilibrium curves have been constructed,and the corresponding equations have beenObtained: 1000 lnaQ-Wf=2.565×107T-2—7.28×l04T-1+57.27 1000 In aWf-H20=-2.285×107T-2+7.49×104T-1-61.79.展开更多
The discovery of Gonghe County Haergeng tungsten polymetallic deposit is one of the most important tungsten deposits discovered in Qinghai Province in recent years.It has important theoretical and practicalsignificanc...The discovery of Gonghe County Haergeng tungsten polymetallic deposit is one of the most important tungsten deposits discovered in Qinghai Province in recent years.It has important theoretical and practicalsignificance.1 Regional geological background The research area lies in the northwest edge of展开更多
The Baiyangping Cu-Ag polymetallic ore district is located in the northern part of the Lanping-Simao foreland fold belt,between the Jinshajiang-Ailaoshan and Lancangjiang faults,and the deposit can be divided into eas...The Baiyangping Cu-Ag polymetallic ore district is located in the northern part of the Lanping-Simao foreland fold belt,between the Jinshajiang-Ailaoshan and Lancangjiang faults,and the deposit can be divided into eastern and western ore zones.Based upon microscope observation of ore minerals and analysis of zinc,copper,and strontium isotope composition,we conclude that:(1)the zinc isotopic compositions of sphalerite from the eastern and western ore belt of the Baiyangping polymetallic ore deposits are enriched in both the heavy(-0.09‰ to+0.15‰) and light(-0.19‰ to-0.01‰)zinc isotopes.Rayleigh fractionation is likely the additional factor controlling the observed temporal and spatial variations in zinc isotopes in the two studied ore zones.The zinc isotopic composition in the Baiyangping polymetallic Pb-Zn deposits may have the same fractionation as that of magmatic-hydrothermal,VHMS,SEDEX,and MVT deposits,as demonstrated by geological and other geochemical evidence;(2) the range of δ^(65)Cu in massive tetrahedrite is from-0.06‰ to+0.12 ‰ that relates to the early stages of ore-formation,which are higher than that of venial chalcopyrite(from-0.72‰ to-0.07‰)formed at a late ore-forming stage in the western ore belt.Different ore-forming stages and alteration or leaching processes are likely the main factors controlling the observed variations in copper isotopes in the western ore zone;(3) the ^(87)Sr/^(86)Sr value of hydrothermal calcite in eastern(0.7080-0.7093) and western(0.7085-0.7113) ore belt suggested that mineralization of early calcite,with^(87)Sr/^(86)Sr values much higher than in ancient Late Triassic seawater,may be related to recrystallization from a radiogenic Sr-rich or silicifying fluid,either from the strata that the ore-forming fluid flows through or from other fluids.展开更多
China produces much tungsten metal every year. The tungsten deposits in China usually are low-grade and have complex mineralogy composition as well as many associated valuable elements. The associated elements include...China produces much tungsten metal every year. The tungsten deposits in China usually are low-grade and have complex mineralogy composition as well as many associated valuable elements. The associated elements include Sn, Mo, Bi, Cu, Pb, Zn, Sb, Be, Co, Au, Ag, Nb, Ta, Re, Sc, REE, Li, As, S, P and the nonmetallic minerals such as quartz, fluorite, feldspar, etc. Therefore, only the tungsten ore dressing is done in accordance with the ore properties based on the detailed and full process mineralogy study can the valuable elements be reasonably and fully recovered and the maximization of resource utilization as well as environment-friendly is achieved eventually. This paper summarizes the status quo of process mineralogy of tungsten and its associated elements in China, focuses on the process mineralogy studies on major tungsten ore types including tungsten-molybdenum associated ore, tungsten-tin polymetallic ore and tungsten-copper polymetallic ore, suggests the future process mineralogy research on tungsten and its associated elements.展开更多
The Shimensi deposit is a recently discovered W-Cu-Mo polymetallic deposit located in the Jiangnan porphyry-skarn W belt in South China.The deposit has a resource of 0.74×10^(6)t of WO_(3)accompanied by 0.4×...The Shimensi deposit is a recently discovered W-Cu-Mo polymetallic deposit located in the Jiangnan porphyry-skarn W belt in South China.The deposit has a resource of 0.74×10^(6)t of WO_(3)accompanied by 0.4×10^(6)t Cu and 28000 t Mo and other useful components like Ga,making it one of the largest W deposits in the world.This paper is aimed to reveal the ore-controlling mechanisms of the Shimensi deposit,involving the role of the ore-related granites,the tectonic background for its formation,and the metallogenesis model.The systematic geological survey suggests multi-types of alteration are developed in the deposit,mainly including greisenization,potassic-alteration,sericitization,chloritization,and silicification.Drilling engineering data and mining works indicate that the Shimensi deposit consists of two main orebodies of I and II.Therein,the W resource has reached a supergiant scale,and the accompanied Cu,Mo,Au,Bi,Ga,and some other useful components are also of economic significance.The main ore-minerals consist of scheelite,wolframite and chalcopyrite.Disseminated mineralization is the dominant type of the W-Cu-Mo polymetallic orebodies,and mainly distributes in the inner and external contact zone that between the Neoproterozoic biotite granodiorite and the Yanshanian granites.The main orebody occurs at the external contact zone,and the pegmatoid crust near the inner contact zone is an important prospecting marker of the W mineralization.Of them,the disseminated W ores within the wall rock of the Neoproterozoic biotite granodiorite is a new mineralization type identified in this paper.Combining previous geochronological and isotopic data,we propose that the mineralization of the Shimensi deposit is closely related to the intruding of the Yanshanian porphyritic biotite granite and granite porphyry.Geochemical data suggest that the biotite granodiorite is rich in Ca and had provided a large amount of Ca for the precipitation of scheelite in this area.Thus,it is a favorable wall rock type for W mineralization.The Shimensi deposit belongs to granitic-type W polymetallic deposit related to post-magmatic hydrothermal,and the ore-forming fluid was initially derived from the Yanshanian magmas.展开更多
Gas sensor materials of bismuth tungstate and bismuth iron tungstate were prepared. Sintered bismuth iron tungstate gas sensors have a high sensitivity and selectivity to ethanol and acetone, show long-term stability ...Gas sensor materials of bismuth tungstate and bismuth iron tungstate were prepared. Sintered bismuth iron tungstate gas sensors have a high sensitivity and selectivity to ethanol and acetone, show long-term stability of response under most operating conditions and insensitivity to atmospheric humidity and respond more quickly in relative case. The changes of the sensors in conductance are mediated by oxygen vacancy donors which caused by the direct reduction. Also, they are highly mobile and can quickly diffuse through the sample, thereby having a direct effect on the electronic carrier density. The phase composition and structure of these gas sensor materials were investigated by XRD technique.展开更多
文摘Based on the oxygen isotopic compositions of 133 wolframite samples and 110 quartz sampleseollected from 30 tungsten ore deposits in south China,in conjunction with δD values and other data,thesc deposits can be divided into four types. （l）Reequilibrated magmatic water-hydrothermal tungsten ore deposits. The δ18O values ofwolframite and quartz samples from this type of tungsten ore deposits are about +5-+12‰,respectively.The calculated δ（18）OH2O values of ore fluids in equilibrium with quartz are about+65‰,and the δDH2O values of fluid inclusions in quartz range from -40 to-70‰. （2）Meteoric water-hydrothermal tungsten ore deposits.Theδ18O values of wolframite in this type oftungsten dePosits are around-1‰. （3）Stratiform tungsten ore deposits.In these deposits,theδ18O values of quartz and wolframite areabout+17 and+3‰,respectively.It is considered that these stratiform tungsten ore deposits aregenetically related to submarine hot—spring activities。 （4）Complex mid-hydrothermal tungsten ore deposits.These tungsten ore deposits arecharacterized by multi-staged mineralization.The δ18O values of early wolframite are around+5‰,butof later wolframite are lower than+4‰,indicating that the early wolframite was precipitated fromreequilibrated magmatic water-hydrothermal solutions and the late one from the mixture ofhvdrothermal solutions with meteoric waters or mainly from meteoric waters, Based on the δ18O values of the coexisting quartz and wolframite and temperature data,twocalibration equilibrium curves have been constructed,and the corresponding equations have beenObtained: 1000 lnaQ-Wf=2.565×107T-2—7.28×l04T-1+57.27 1000 In aWf-H20=-2.285×107T-2+7.49×104T-1-61.79.
文摘The discovery of Gonghe County Haergeng tungsten polymetallic deposit is one of the most important tungsten deposits discovered in Qinghai Province in recent years.It has important theoretical and practicalsignificance.1 Regional geological background The research area lies in the northwest edge of
基金financially supported by General Project of Natural Science Foundation of Shaanxi Province (2020JM-423)。
文摘The Baiyangping Cu-Ag polymetallic ore district is located in the northern part of the Lanping-Simao foreland fold belt,between the Jinshajiang-Ailaoshan and Lancangjiang faults,and the deposit can be divided into eastern and western ore zones.Based upon microscope observation of ore minerals and analysis of zinc,copper,and strontium isotope composition,we conclude that:(1)the zinc isotopic compositions of sphalerite from the eastern and western ore belt of the Baiyangping polymetallic ore deposits are enriched in both the heavy(-0.09‰ to+0.15‰) and light(-0.19‰ to-0.01‰)zinc isotopes.Rayleigh fractionation is likely the additional factor controlling the observed temporal and spatial variations in zinc isotopes in the two studied ore zones.The zinc isotopic composition in the Baiyangping polymetallic Pb-Zn deposits may have the same fractionation as that of magmatic-hydrothermal,VHMS,SEDEX,and MVT deposits,as demonstrated by geological and other geochemical evidence;(2) the range of δ^(65)Cu in massive tetrahedrite is from-0.06‰ to+0.12 ‰ that relates to the early stages of ore-formation,which are higher than that of venial chalcopyrite(from-0.72‰ to-0.07‰)formed at a late ore-forming stage in the western ore belt.Different ore-forming stages and alteration or leaching processes are likely the main factors controlling the observed variations in copper isotopes in the western ore zone;(3) the ^(87)Sr/^(86)Sr value of hydrothermal calcite in eastern(0.7080-0.7093) and western(0.7085-0.7113) ore belt suggested that mineralization of early calcite,with^(87)Sr/^(86)Sr values much higher than in ancient Late Triassic seawater,may be related to recrystallization from a radiogenic Sr-rich or silicifying fluid,either from the strata that the ore-forming fluid flows through or from other fluids.
文摘China produces much tungsten metal every year. The tungsten deposits in China usually are low-grade and have complex mineralogy composition as well as many associated valuable elements. The associated elements include Sn, Mo, Bi, Cu, Pb, Zn, Sb, Be, Co, Au, Ag, Nb, Ta, Re, Sc, REE, Li, As, S, P and the nonmetallic minerals such as quartz, fluorite, feldspar, etc. Therefore, only the tungsten ore dressing is done in accordance with the ore properties based on the detailed and full process mineralogy study can the valuable elements be reasonably and fully recovered and the maximization of resource utilization as well as environment-friendly is achieved eventually. This paper summarizes the status quo of process mineralogy of tungsten and its associated elements in China, focuses on the process mineralogy studies on major tungsten ore types including tungsten-molybdenum associated ore, tungsten-tin polymetallic ore and tungsten-copper polymetallic ore, suggests the future process mineralogy research on tungsten and its associated elements.
基金supported financially by the National Natural Science Foundation of China(No.41772069)projects of the China Geological Survey(1212011220737,121201004000150015,DD20190570).
文摘The Shimensi deposit is a recently discovered W-Cu-Mo polymetallic deposit located in the Jiangnan porphyry-skarn W belt in South China.The deposit has a resource of 0.74×10^(6)t of WO_(3)accompanied by 0.4×10^(6)t Cu and 28000 t Mo and other useful components like Ga,making it one of the largest W deposits in the world.This paper is aimed to reveal the ore-controlling mechanisms of the Shimensi deposit,involving the role of the ore-related granites,the tectonic background for its formation,and the metallogenesis model.The systematic geological survey suggests multi-types of alteration are developed in the deposit,mainly including greisenization,potassic-alteration,sericitization,chloritization,and silicification.Drilling engineering data and mining works indicate that the Shimensi deposit consists of two main orebodies of I and II.Therein,the W resource has reached a supergiant scale,and the accompanied Cu,Mo,Au,Bi,Ga,and some other useful components are also of economic significance.The main ore-minerals consist of scheelite,wolframite and chalcopyrite.Disseminated mineralization is the dominant type of the W-Cu-Mo polymetallic orebodies,and mainly distributes in the inner and external contact zone that between the Neoproterozoic biotite granodiorite and the Yanshanian granites.The main orebody occurs at the external contact zone,and the pegmatoid crust near the inner contact zone is an important prospecting marker of the W mineralization.Of them,the disseminated W ores within the wall rock of the Neoproterozoic biotite granodiorite is a new mineralization type identified in this paper.Combining previous geochronological and isotopic data,we propose that the mineralization of the Shimensi deposit is closely related to the intruding of the Yanshanian porphyritic biotite granite and granite porphyry.Geochemical data suggest that the biotite granodiorite is rich in Ca and had provided a large amount of Ca for the precipitation of scheelite in this area.Thus,it is a favorable wall rock type for W mineralization.The Shimensi deposit belongs to granitic-type W polymetallic deposit related to post-magmatic hydrothermal,and the ore-forming fluid was initially derived from the Yanshanian magmas.
文摘Gas sensor materials of bismuth tungstate and bismuth iron tungstate were prepared. Sintered bismuth iron tungstate gas sensors have a high sensitivity and selectivity to ethanol and acetone, show long-term stability of response under most operating conditions and insensitivity to atmospheric humidity and respond more quickly in relative case. The changes of the sensors in conductance are mediated by oxygen vacancy donors which caused by the direct reduction. Also, they are highly mobile and can quickly diffuse through the sample, thereby having a direct effect on the electronic carrier density. The phase composition and structure of these gas sensor materials were investigated by XRD technique.
