Na +-montmorillonite(Na +-MMT) was converted to organic montmorillonite(OMMT) using modifier which was synthesized at authors’ laboratory. PA6/OMMT nanocomposite was prepared via in situ intercalative polymerization....Na +-montmorillonite(Na +-MMT) was converted to organic montmorillonite(OMMT) using modifier which was synthesized at authors’ laboratory. PA6/OMMT nanocomposite was prepared via in situ intercalative polymerization. The limiting oxygen index (LOI), UL 94V flame retardancy and thermal stability of PA6/OMMT using thermal gravity analysis (TGA) were measured. The Fourier transform infrared (FTIR) technique was used to analyze the pyrolytic residuum and the cone calorimeter (CONE) was applied to determine a number of combustion parameters which were closely related to fire safety, including heat release rate, mass loss rate, effective combustion heat, total heat release, specific extinction area and the time of ignition. In addition, the elemental composition of the surface pyrolytic residuum and the corresponding X-ray photoelectron spectroscopy (XPS) data were obtained, and the morphology of the residuum from CONE measurement was examined by scanning electron microscope (SEM).展开更多
The flammability, smoke emission behavior and mechanical properties of two oligomeric aryl phosphates [bisphenol A bis（diphenyl phosphate） （BDP） and resorcinol bis（diphenyl phosphate） （RDP）] combined with magn...The flammability, smoke emission behavior and mechanical properties of two oligomeric aryl phosphates [bisphenol A bis（diphenyl phosphate） （BDP） and resorcinol bis（diphenyl phosphate） （RDP）] combined with magnesium hydroxide （MH） in polyamide 6 （PA6） have been investigated. Combining 5 wt% BDP, 50 wt% MH imparts a limiting oxygen index （LOI） of 40.9% and UL94 V-0 rating to PA6, meanwhile the peak rate of smoke release （pRSR）, total release of smoke （TSR） and Izod notched impact strength are 41%, 33% and 233% relative to the corresponding value of 55 wt% MH without BDP, respectively. Dynamic mechanical analysis （DMA） indicates that the improvement of toughness attributes to the enhanced compatibility between MH and PA6 by adding BDP. Furthermore, based on the comprehensive analysis of thermogravimetry （TG）, cone calorimeter and SEM-EDX investigations, possible flame retardancy and smoke suppression mechanisms were revealed. Besides the fuel dilution and barrier effect of MH, the combination of MH and RDP shows an additional flame inhibition effect. The combination of MH and BDP results in a dominant condensed phase barrier effect which leads to obvious reduction on smoke emission and flammability.展开更多
Polyamide 6 (PA6) was employed as a charring agent of intumescent flame retardant (IFR) to improve the flame retardancy of ethylene-vinyl acetate copolymer (EVA). Different processing procedures were used to regulate ...Polyamide 6 (PA6) was employed as a charring agent of intumescent flame retardant (IFR) to improve the flame retardancy of ethylene-vinyl acetate copolymer (EVA). Different processing procedures were used to regulate the localization of IFR in the EVA matrix. Localizations in which IFR was dispersed in the PA6phase or in the EVA phase were prepared. The effect of the localization of IFR on the flame retardancy of EVA was investigated. The limited oxygen index (LOI), vertical burning (UL 94) and cone calorimeter test (CCT)showed that the localization of IFR in the EVA matrix exhibited a remarkable influence on the flame retardancy.Compared with EVA/IFR, a weak improvement in the flame retardancy was observed in the EVA/PA6/IFR blend withthe localization of IFR in the PA6 phase. When IFR was regulated from the PA6 phase to the EVA matrix,a remarkable increase in the flame retardancy was exhibited. The LOI was increased from 27.8%to 32.7%, and the UL 94 vertical rating was increased from V-2 to V-0. Moreover, an approximately 41.36%decrease in the peak heat release rate was exhibited. A continuous and compact intumescent charring layer that formed in the blends with the localization of IFR in the EVA matrix should be responsible for its excellent flame retardancy.展开更多
文摘Na +-montmorillonite(Na +-MMT) was converted to organic montmorillonite(OMMT) using modifier which was synthesized at authors’ laboratory. PA6/OMMT nanocomposite was prepared via in situ intercalative polymerization. The limiting oxygen index (LOI), UL 94V flame retardancy and thermal stability of PA6/OMMT using thermal gravity analysis (TGA) were measured. The Fourier transform infrared (FTIR) technique was used to analyze the pyrolytic residuum and the cone calorimeter (CONE) was applied to determine a number of combustion parameters which were closely related to fire safety, including heat release rate, mass loss rate, effective combustion heat, total heat release, specific extinction area and the time of ignition. In addition, the elemental composition of the surface pyrolytic residuum and the corresponding X-ray photoelectron spectroscopy (XPS) data were obtained, and the morphology of the residuum from CONE measurement was examined by scanning electron microscope (SEM).
基金Chinese 973 National Key Scientific Project(No.2011CB606002)Key Project in Science and Technology of Guangdong Province(No.2010B010800018)the Cultivation Fund of the Key Scientific and Technical Innovation Project,Department of Education of Guangdong Province(No.cxzd1008)
文摘The flammability, smoke emission behavior and mechanical properties of two oligomeric aryl phosphates [bisphenol A bis（diphenyl phosphate） （BDP） and resorcinol bis（diphenyl phosphate） （RDP）] combined with magnesium hydroxide （MH） in polyamide 6 （PA6） have been investigated. Combining 5 wt% BDP, 50 wt% MH imparts a limiting oxygen index （LOI） of 40.9% and UL94 V-0 rating to PA6, meanwhile the peak rate of smoke release （pRSR）, total release of smoke （TSR） and Izod notched impact strength are 41%, 33% and 233% relative to the corresponding value of 55 wt% MH without BDP, respectively. Dynamic mechanical analysis （DMA） indicates that the improvement of toughness attributes to the enhanced compatibility between MH and PA6 by adding BDP. Furthermore, based on the comprehensive analysis of thermogravimetry （TG）, cone calorimeter and SEM-EDX investigations, possible flame retardancy and smoke suppression mechanisms were revealed. Besides the fuel dilution and barrier effect of MH, the combination of MH and RDP shows an additional flame inhibition effect. The combination of MH and BDP results in a dominant condensed phase barrier effect which leads to obvious reduction on smoke emission and flammability.
基金the National Natural Science Foundation of China (No.51673059)the Science and Technology Planning Project of Henan Province (No. 212102210636)the Opening Project of Jiangxi Province Key Laboratory of Polymer Micro/Nano Manufacturing and Devices (East China University of Technology)。
文摘Polyamide 6 (PA6) was employed as a charring agent of intumescent flame retardant (IFR) to improve the flame retardancy of ethylene-vinyl acetate copolymer (EVA). Different processing procedures were used to regulate the localization of IFR in the EVA matrix. Localizations in which IFR was dispersed in the PA6phase or in the EVA phase were prepared. The effect of the localization of IFR on the flame retardancy of EVA was investigated. The limited oxygen index (LOI), vertical burning (UL 94) and cone calorimeter test (CCT)showed that the localization of IFR in the EVA matrix exhibited a remarkable influence on the flame retardancy.Compared with EVA/IFR, a weak improvement in the flame retardancy was observed in the EVA/PA6/IFR blend withthe localization of IFR in the PA6 phase. When IFR was regulated from the PA6 phase to the EVA matrix,a remarkable increase in the flame retardancy was exhibited. The LOI was increased from 27.8%to 32.7%, and the UL 94 vertical rating was increased from V-2 to V-0. Moreover, an approximately 41.36%decrease in the peak heat release rate was exhibited. A continuous and compact intumescent charring layer that formed in the blends with the localization of IFR in the EVA matrix should be responsible for its excellent flame retardancy.
