Effect and mechanism of reductive polyaniline on the stability of nitrocellulose

The search for new green and efficient stabilizers is of great importance for the stabilization of nitrocellulose(NC). This is due to the shortcomings of traditional stabilizers, such as high toxicity. In this study, reduced polyaniline(r-PANI), which has a similar functional structure to diphenylamine(DPA) but is non-toxic, was prepared from PANI based on the action with N_(2)H_(4) and NH_(3)-H_(2)O, and used for the first time as a potential stabilizer for NC. XPS, FTIR, Raman, and SEM were used to characterize the reduced chemical structure and surface morphology of r-PANI. In addition, the effect of r-PANI on the stabilization of NC was characterized using DSC, VST, isothermal TG, and MMC. Thermal weight loss was reduced by 83% and 68% and gas pressure release by 75% and 49% compared to pure NC and NC&3%DPA, respectively.FTIR and XPS were used to characterize the structural changes of r-PANI before and after reaction with NO_(2). The 1535 cm^(-1) and 1341 cm^(-1) of the FTIR and the 404.98 eV and 406.05 eV of the XPS showed that the -NO_(2) was generated by the absorption of NO_(2). Furthermore, the quantum chemical calculation showed that NO_(2) was directly immobilized on r-PANI by forming -NO_(2) in the neighboring position of the benzene ring.

Surface Morphology and Thermo-Electrical Energy Analysis of Polyaniline (PANI) Incorporated Cotton Fabric

With the exponential development in wearable electronics,a significant paradigm shift is observed from rigid electronics to flexible wearable devices.Polyaniline(PANI)is considered as a dominant material in this sector,as it is endowed with the optical properties of both metal and semiconductors.However,its widespread application got delineated because of its irregular rigid form,level of conductivity,and precise choice of solvents.Incorporating PANI in textile materials can generate promising functionality for wearable applications.This research work employed a straightforward in-situ chemical oxidative polymerization to synthesize PANI on Cotton fabric surfaces with varying dopant(HCl)concentrations.Pre-treatment using NaOH is implemented to improve the conductivity of the fabric surface by increasing the monomer absorption.This research explores the morphological and structural analysis employing SEM,FTIR and EDX.The surface resistivity was measured using a digital multimeter,and thermal stability is measured using TGA.Upon successful polymerization,a homogenous coating layer is observed.It is revealed that the simple pre-treatment technique significantly reduces the surface resistivity of Cotton fabric to 1.27 kΩ/cm with increasing acid concentration and thermal stability.The electro-thermal energy can also reach up to 38.2°C within 50 s with a deployed voltage of 15 V.The modified fabric is anticipated to be used in thermal regulation,supercapacitor,sensor,UV shielding,antimicrobial and other prospective functional applications.

Synthesis of Chiral Polyaniline Induced by Modified Hemoglobin

The synthesis of chiral polyaniline （PANI） induced by modified hemoglobin （Hb） was pro- foundly explored for the first time. Results revealed that after being separated, inactivated or immobilized, Hb can still induce the formation of chiral PANI successfully, suggesting that Hb can be used as the chiral inducers regardless of harsh reaction conditions. By examining the properties of PANI induced by modified Hb, it was found that Hb（inactivated）-PANI possessed excellent chirality, stability, and crystalline structure. The globin separated from Hb was demonstrated to have the ability of inducing the production of chiral PANI whereas the hematin from Hb had no capacity to direct enantio specificity for the PANI chains. Results indicated that Hb（immobilized）-PANI exhibited poor yield, doping state, and crys- talline structure, indicating that the immobilization of Hb by entrapment was not beneficial to the polymerization reaction. Results also showed that the structure of Hb may have significant effects on the morphologies of chiral PANI.

PREPARATION OF POLYANILINE/ACETYLENE BLACK COMPOSITE AS HOLE CONDUCTOR IN SOLID-STATE DYE-SENSITIZED SOLAR CELL

A clay-like conductive material comprising polyaniline（PANI）-acetylene black particles is fabricated as a hole conductor for dye sensitized solar cell（DSSC）.The results show that the introduction of acetylene black into the polymer electrolyte improves the photovoltaic behavior of solid-state DSSC,owing to the increase of the hole mobility of PANI electrolyte,the improvement of the wetting quality of the composite electrolyte,and the reinforcement of interface contact between electrode and the electrolyte.Finally,the overall energy conversion efficiency of DSSC with PANI-50%（in weight）acetylene black electrolyte is 48% of that of liquid DSSC.Therefore,the PANI-acetylene black composition is a credible alternative to hole conductor in application of solid DSSC.

Palladium nanoparticles in cross-linked polyaniline as highly efficient catalysts for Suzuki-Miyaura reactions

Palladium nanoparticles supported on cross-linked polyaniline with bulky phosphorus ligands were developed.These catalysts showed high efficiency in the Suzuki-Miyaura reaction of aryl chlorides and bromides with phenylboronic acids.Aryl chlorides and bromides with functional groups,such as CN,MeO,CHO,MeCO and NO_2,were converted to the corresponding biphenyls in high yields with catalyst loading.Additionally,the catalysts combined high activity with good reusability;they could be used at least five times for the Suzuki-Miyaura coupling reaction.

Fe^(3+)/Fe^(2+) redox electrolyte for high-performance polyaniline/SnO_2 supercapacitors

The Fe3＋/Fe2＋ redox electrolyte for use in polyaniline/tin oxide （PANI/SnO2）supercapacitors was reported. The influences of redox electrolyte based on different Fe3＋/Fe2＋ ion pair concentrations in 1 mol/LH2SO4 solution on the pseudocapacitive behaviors of PANI/SnO2 supercapacitor were investigated. The electrochemical properties of the supercapacitor were studied by cyclic voltammetry （CV）, galvanostatic charge discharge （GCD）, and electrochemical impedance spectroscopy （EIS） techniques. It is found that the performance of the supercapacitor is the best when the Fe3＋/Fe2＋ concentrationis 0.4 mol/L and its initial specific capacitance is 1172 F/g at an applied current density of 1 A/g. The long-term cycling experiment shows good stability with the retention of initial capacitance values of 88% after 2000 galvanostatic cycles. The experimental results testify that using Fe3＋/Fe2＋ redox electrolyte has a good prospect for improving the performances of energy-storage devices.

Electrochemical Behavior and Specific Capacitance of Polyaniline/Silver Nanoparticle/Multi-walled Carbon Nanotube Composites

In this work, we fabricated the polyaniline/silver nanoparticle/multi-walled carbon nanotube （PANI/Ag/MWCNT） composites by in situ polymerization of aniline on the wall of Ag/MWCNTs with different aniline to Ag/MWCNT mass ratios. The chemical structure of the ternary composites was characterized by Fourier transform infrared spectroscopy, Xray diffraction, and X-ray photoelectron spectroscopy. Scanning electron microscope and high-resolution transmission electron microscopy were used to observe the morphology of the ternary composites. The results showed that the polyaniline PANI layer was prepared successfully and it covered Ag/MWCNTs completely. In addition, Ag nanoparticles between the MWCNT core and the PANI layer existed in the form of elemental crystal, which could contribute to the electrochemical performance of the composites. Then we prepared the composite electrodes and studied their electrochemical behaviors in 1 mol/L KOH. It was found that these composite electrodes had very low impedance, and exhibited lower resistance, higher electrochemical activity, and better cyclic stability compared with pure PANI electrode. Particularly, when the mass ratio of aniline to Ag/MWCNTs was 5：5, the composite electrode displayed a small equivalent series resistance （0.23 Ω） and low interfacial charge transfer resistance （〈0.25 Ω）, as well as 160 F/g of the maximum specific capacitance at a current density of 0.25 A/g in KOH solution. We could conclude that the composite material had potential applications as cathode materials for lithium batteries and supercapacitors.

A novel polyaniline/mesoporous carbon nano-composite electrode for asymmetric supercapacitor

A novel nano-composite of polyaniline/mesoporous carbon（PANI/CMK-3） was prepared with mesoporous carbon（CMK-3） serving as the support.Electrochemical asymmetric capacitors have been successfully designed by using PANI/CMK-3 composite and CMK-3 as positive and negative electrode,respectively.The results showed that the discharge capacity of the asymmetric capacitor could reach 87.4 F/g under the current density of 5 mA/cm^2 and cell voltage of 1.4 V.The energy density of the asymmetric capacitor was up to 23.8 Wh/kg with a power density of 206 W/kg.Furthermore,PANI/CMK-3-CMK-3 asymmetric capacitor using this PANI/CMK-3 nano-composite could be activated quickly and possess high charge-discharge efficiency.

Platinum-polyaniline-modified carbon fiber electrode for the electrooxidation of methanol

Platinum was electrodeposited onto a polyaniline-modified carbon fiberelectrode by the cyclic voltammetric method in sulfuric acid, which may enable an increase in thelevel of platinum utilization currently achieved in electrocatalytic systems. This electrodepreparation consists of a two-step procedure: first electropolymerization of aniline onto carbonfiber and then electrodeposition of platinum. The catalytic activity of theplatinum-polyanihne-modified carbon fiber electrode (Pt/PAni/C) was compared with that of a barecarbon fiber electrode (Pt/C) by the oxidation of methanol. The maximum oxidation current ofmethanol on Pt/PAni/C is 50.7 mA centre dot cm^(-2), which is 6.7 times higher than 7.6 mA centredot cm^(-2) on the Pt/C. Scanning electron microscopy was used to investigate the dispersion of theplatinum particles of about 0.4 um.

A flexible solid-state supercapacitor based on graphene/polyaniline paper electrodes

The direct coating of graphene sheets obtained by electrochemical exfoliation on commercial paper renders the preparation of highly conductive flexible paper substrate for subsequent deposition of polyaniline (PANi) nanorods via electrochemical polymerization. The deposit ion of PANi can be well-controlled by adjusting the electrochemical polymerization time, leading to the formation of PANi coated graphene paper (PANi-GP). The as-prepared electrode exhibited high areal capacitance of 176 mF cm^-2 in three-electrode system at a current density of 0.2 mA cm^-2 which is around 10 times larger than that of pris-tine graphene paper due to the pseudocapacitive behavior of PANi. In-situ Raman test was used to determine the molecular changes during redox process of PANi. More importantly, all-solid-state symmetric capacitor assembled with two PANi-GP electrodes in a polymer electrolyte delivered an areal capacitanee of 123 mF cm^-2, corresponding to an areal energy density of 17.1 μWh cm^-2 and an areal power density of 0.25 mW cm^-2. The symmetric capacitor held a capacitive retention of 74.8% after 500 bending tests from 0 to 120°, suggesting the good flexibility and mechanical stability. These results showed the great promising application in flexible energy-storage devices.

Antibacterial Effect of the Conducting Polyaniline

Excellent antibacterial performance of polyaniline （PAni） against Escherichia coli and Gram-positive Staphylococcus aureus microorganisms has been demonstrated under both dark and visible light conditions. The electrostatic adherence between the PAni molecules and the bacteria may play a very important role for the antibacterial reaction of the PAni. As a result of our investigation, conducting PAni and its composites/blends are believed to be useful as a new type of antibacterial agent, self-clean as well as multifunctional material for improving the human health and living environment.

Polyaniline Formed in Alkaline Solution─A New Luminous Material

Electropolymerization of aniline in KOH solution and properties of the polymer are studied by using in situ reflex ellipsometry, cyclic voltammetry and fluorescence spectroscopic method. The change patterns of ellipsometric parameters and the thickness of film in the process of electropolymerization are investigated. The complex refractive indices and the fluorescence spectra of PAN indicate that the PAN is a new kind of luminous material.

Preparation of a Novel Acid Doped Polyaniline Adsorbent for Removal of Anionic Pollutant from Wastewater

Polyaniline(PANI) was one of the most extensively studied adsorbents due to its low cost and good environmental stability. The objective of the current study was to improve the selective capabilities of PANI for anionic dyes. We found that the acid doped PANI prepared with hydrochloric acid and p-toluenesulfonic acid(PTSA) could selectively adsorb anionic dyes. It exhibited very good selectivity for OG dye, the mechanism was proposed based on the chemical interaction of PANI with the sulfonate group of the dyes. The effects of solution p H, initial dye concentration, and different HCl/PTSA mole ratios on the adsorption capacity of OG have been investigated. Kinetic simulations indicated that the adsorption process could be well represented by pseudo-second-order kinetic plots. The isothermal adsorption curve fitting also showed that the adsorption process could be well described by the Langmuir isothermal equation. The results showed that acid doped PANI could be employed as a promising adsorbent for anion removal from dye wastewater.

Fabrication of Polyaniline/Silver Nanocomposite Under Gamma-ray Irradiation

Polyaniline （PANI）/silver composite was one-step synthesized under γ-ray irradiation. The structure of the composite was characterized by Fourier transform infrared spectroscopy, UV-Visible, and X-ray diffraction, which indicated that PANI and face-centered-cubic silver were synthesized under γ-ray irradiation. The reaction mechanism were discussed, which revealed that the PANI was formed by the reaction of aniline cation radicals formed by the reaction of aniline cation and -OH, and Ag was formed by the reaction of Ag＋ and eaq. The morphology of the composite consisted of PANI nanofibers and Ag nanoparticles, and the mechanism of the morphology formation was discussed, which revealed that the rapid mixing like polymerization process might play an important role. It was revealed that the transport behavior of the composite well fitted with the variable-range-hopping model in 80-300 K and deviated from the model below 80 K.

Electrodeposition and Characterization of Polyaniline Film

Abstract Polyaniline film was prepared by electrochemical method in an acidic solution of aniline. The micromor- phology of the polyaniline film was transformed to three-dimensional network structure instead of little particles while the deposition time was extended. The peak wavelength of the photoluminescence spectrum was 491 nm. The luminous intensity increased with the extension of deposition time, and so did the electrochemical activity.

Preparation of Polyaniline/TiO_2 Composite Nanotubes for Photodegradation of AZO Dyes

Polyaniline （PANI） composite nanotubes （90-130 nm in diameter） containing titanium dioxide （TiO2） nanoparticles （about 10 nm in diameter） were synthesized through a self-assembly process in the presence of a-naphthalenesulfonic acid （a-NSA） as the dopant. It was found that PANI-TiO2 composites and PANI nanotubes both behaved with significant photocatalytic activities towards AZO dyes, during 2 h photocatalytic processes under natural light, the degradation ratio was 94.2% and 97.2% respectively （methyl orange and orange II）. The morphology of such products was characterized by SEM. The specific surface area of such composite nanotubes was 14.7 m2/g compared to normal polyaniline which was 0.27 m2/g. IR and X-ray diffraction characterizations showed that the chemical chain of the composite nanotubes was identical to that of the doped PANI. It may provide a new way for photodegradation of organic contaminants by using conjugated polymer with dimensional structure.

Effects of alkaline cations (M^+= Li^+, Na^+, K^+, Cs^+) on the electrochemical synthesis of polyaniline in nitric acid electrolyte

The effects of alkaline cations （M^＋ = Li^＋, Na^＋, K^＋, Cs^＋）on the electrochemical synthesis of polyaniline were carfled out under cyclovoltammetric conditions using nitrates of Li^＋, Na^＋, K^＋, and Cs^＋ as the supporting electrolytes. The results show that the oxidation potentials of aniline in the electrolytes decrease as the protonation extent of aniline decreases from the fast scan, which is caused by the decrease of the ionic radius of alkaline metal ions at the same concentration of alkaline cations. With the scan number increasing, the deposit charge Q as the characteristic growth function also depends on the protonation of aniline, and it increases with the ionic radius of alkaline cations increasing. SEM images show the effect of alkaline cations on the morphology of polyaniline. It is clear that the ionic mobility of alkaline cations is further lower than that of W. Alkaline cations and counter-ions were the species responsible for the enhancement of Pani electrosynthesis. Therefore, this is exactly what SEM images show： a relatively rough fibrous structure in the case of Pani-H^＋ suggesting a sponge-like structure and a highly orderly fiber-like structure in the case of Pani-M^＋.

Performance of Polyaniline-coated Short Carbon Fibers in Electromagnetic Shielding Coating

Combined nitric acid oxidation method and polyaniline （PANI）-coated method were applied to modify the surface properties of short carbon fibers （SCF）. The electrical and mechanical properties of acrylic coatings with 50 wt pct PANI-coated carbon fiber were investigated by using scanning electron microscope （SEM）, UV-Vis spectrophotometer, four-probe method and the coaxial cable method. The results of the pH measurement and XPS （X-ray photoelectron spectroscopy） patterns showed that the oxygen functional groups, such as -OH and -COOH, were attached on the carbon fiber surfaces after oxidation treatment. The XPS analysis of PANl-coated oxidized SCF （PAOSCF） revealed that PANI may bond on the surface of oxidized SCF with chemical bonds. SEM images and surface roughness analyses showed that PANl-coated layer changed the surface morphology. Compared with SCF/acrylic coating, the surface resistivity of PAOSCF/acrylic coating decreased from17.1 to 5.3 Ω/sq and the shielding efficiency （SE） value increased from 1.54 to 23.3 dB.

Preparation and Electrocatalytic Activity of Polyaniline-poly(propylene oxide)

A novel copolymer of polyaniline-poly(propylene oxide) (PAN-PPO) was prepared by cyclic voltammetry (CV) and characterized by FTIR and SEM. It showed good electroactivity for methanol oxidation in H2SO4 solution.

Orange dye polyaniline composite based impedance humidity sensors

This study presents the fabrication and investigation （PANI） composite films. A blend of 3 wt.% OD with 1 of humidity sensors based on orange dye （OD） and polyaniline wt.% PANI was prepared in 1 ml water. The composite films were deposited on glass substrates between pre-deposited silver electrodes. The gap between the electrodes was 45 um. The sensing mechanism was based on the impedance and capacitance variations due to the absorption/desorption of water vapor. It was observed that with the increase in relative humidity （RH） from 30% to 90%, the impedance decreases by 5.2 × 10^4 and 8.8 × 10^3 times for the frequencies of 120 Hz and 1 kHz, respectively. The impedance-humidity relationship showed a more uniform change compared to the capacitance-humidity relationship in the RH range of 30% to 90%. The consequence of annealing, measuring frequency, response and recovery time, and absorption-desorption behavior of the humidity sensor were also discussed in detail. The annealing resulted in an increase in sensitivity of up to 2.5 times, while the measured response time and recovery time were 34 s and 450 s, respectively. The impedance-humidity relationship was simulated.