Flexible PANI-Polyethersulfone (PES) fibers were fabricated using the wet-spinning technique.PANI particles were uniformly distributed within the matrix and micropores formed by the phase separation of PES,which preve...Flexible PANI-Polyethersulfone (PES) fibers were fabricated using the wet-spinning technique.PANI particles were uniformly distributed within the matrix and micropores formed by the phase separation of PES,which prevented PANI particles aggregation and facilitated the formation of continuous ion transport channels.The experimental results reveals that the electrochemical performance of the fiber electrode material is optimal when the concentration of PES in the spinning solution is 15wt%.The assembled supercapacitor exhibits a commendable specific area capacitance of 162.75 mF·cm^(-2) at a current density of 0.5 mA·cm^(-2) and achieves an energy density of 14.47 mWh·cm^(-2) at a power density of 321.69 mW·cm^(-2).The capacitor retains 98.1% of its capacitance after 1 000 bending cycles.Therefore,the prepared fibers have good electrochemical properties and flexibility,and this simple and efficient preparation method is promising for the scalable production of flexible electrodes.展开更多
为进一步推动女性科技工作者的影响力与贡献力,时值世界第114个国际劳动妇女节到来之际,IEEE PES WIP(IEEE PES Women in Power)联合《高电压技术》《高压电器》《湖北电力》,面向广大IEEE PES WIP会员征集关于“IEEE PES CHINA WIP高...为进一步推动女性科技工作者的影响力与贡献力,时值世界第114个国际劳动妇女节到来之际,IEEE PES WIP(IEEE PES Women in Power)联合《高电压技术》《高压电器》《湖北电力》,面向广大IEEE PES WIP会员征集关于“IEEE PES CHINA WIP高电压工程与新技术”专题的高水平科技论文。本专题拟于2024年下半年刊发,真诚欢迎广大IEEE PES WIP中国区会员联合国内外专家学者以及国家级科研计划承担单位踊跃投稿!展开更多
This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting co...This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.展开更多
This study was performed to investigate the availability of forward osmosis(FO)for microalgae harvesting using sulfonated polyethersulfone(SPES)/PES porous membranes.In FO process,porous membranes(<25.0 L m^−2 h^−1...This study was performed to investigate the availability of forward osmosis(FO)for microalgae harvesting using sulfonated polyethersulfone(SPES)/PES porous membranes.In FO process,porous membranes(<25.0 L m^−2 h^−1)exhibited more superior water flux than TFC FO membranes(<2.6 L m^−2 h^−1).Furthermore,the incorporation of SPES has been demonstrated to enhance membrane performance.The effects of SPES content on pore structure and separation performance were investigated.Compared with pure PES porous membranes,porous membranes with 40%SPES yielded an improved hydrophilicity and greater porosity.It exhibited two times higher water fluxes than the pure PES porous membrane.For microalgae harvesting,AL-FS mode(active layer facing the feed solution)was more favourable than AL-DS mode(active layer facing the draw solution)because less deposited microalgae on the active layer mitigate the membrane biofouling.FO operation combined with SPES/PES porous membranes is conducive to preserving microalgae cell integrity under the mild condition.In addition,FO membrane can be cleaned by a simple water rinse.Potential implications were highlighted as a sustainable method for microalgae harvesting because of no pressure input and less chemical cleaning demand.展开更多
Compared to inorganic supports, polymeric supports can offer additional benefits, e.g., easier processing and cheaper. However, the organic surface has weak adhesion to the zeolitic imidazolate frameworks(ZIFs) membra...Compared to inorganic supports, polymeric supports can offer additional benefits, e.g., easier processing and cheaper. However, the organic surface has weak adhesion to the zeolitic imidazolate frameworks(ZIFs) membrane layer, which usually requires complex surface modification or seeding. Herein, we demonstrate that a dual-layer asymmetric polymer support prepared by a simple spinning process is a good candidate for the preparation of ZIF-8 membrane. The inner layer of the support is an organic hollow fiber(PES) with finger-like pores, and the outer layer is a ZnO-PES composite layer with finger-like pores also. The ZnO-PES composite layer is expected to contain uniform ZnO crystals in the polymer matrix, i.e., the ZnO particles in the skin layer of the support are not easy to fall off. Under the induction of ZnO particles in the outer layers, continuous ZIF-8 membranes can be prepared by single in-situ crystallization, showing good adhesion to the supports. The obtained ZIF-8 membranes show a H_(2) permeance of 8.7 × 10^(-8)mol·m^(-2)·s^(-1)·Pa^(-1) with a H_(2)/N_(2) ideal separation selectivity of 18.0. The design and preparation of this dual-layer polymer support is expected to promote the large-scale application of MOF membranes on polymer supports.展开更多
基金Funded by the Hubei Integrative Technology and Innovation Center for Advanced Fiberous Materials Open Fund (No.XC202425)。
文摘Flexible PANI-Polyethersulfone (PES) fibers were fabricated using the wet-spinning technique.PANI particles were uniformly distributed within the matrix and micropores formed by the phase separation of PES,which prevented PANI particles aggregation and facilitated the formation of continuous ion transport channels.The experimental results reveals that the electrochemical performance of the fiber electrode material is optimal when the concentration of PES in the spinning solution is 15wt%.The assembled supercapacitor exhibits a commendable specific area capacitance of 162.75 mF·cm^(-2) at a current density of 0.5 mA·cm^(-2) and achieves an energy density of 14.47 mWh·cm^(-2) at a power density of 321.69 mW·cm^(-2).The capacitor retains 98.1% of its capacitance after 1 000 bending cycles.Therefore,the prepared fibers have good electrochemical properties and flexibility,and this simple and efficient preparation method is promising for the scalable production of flexible electrodes.
文摘为进一步推动女性科技工作者的影响力与贡献力,时值世界第114个国际劳动妇女节到来之际,IEEE PES WIP(IEEE PES Women in Power)联合《高电压技术》《高压电器》《湖北电力》,面向广大IEEE PES WIP会员征集关于“IEEE PES CHINA WIP高电压工程与新技术”专题的高水平科技论文。本专题拟于2024年下半年刊发,真诚欢迎广大IEEE PES WIP中国区会员联合国内外专家学者以及国家级科研计划承担单位踊跃投稿!
文摘This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.
基金This work was supported by the National Natural Science Foundation of China(No.21576250)the Key Research Project of Shandong Province(No.2018CXGC 1003),and the Young Taishan Scholars Program of Shandong Province.
文摘This study was performed to investigate the availability of forward osmosis(FO)for microalgae harvesting using sulfonated polyethersulfone(SPES)/PES porous membranes.In FO process,porous membranes(<25.0 L m^−2 h^−1)exhibited more superior water flux than TFC FO membranes(<2.6 L m^−2 h^−1).Furthermore,the incorporation of SPES has been demonstrated to enhance membrane performance.The effects of SPES content on pore structure and separation performance were investigated.Compared with pure PES porous membranes,porous membranes with 40%SPES yielded an improved hydrophilicity and greater porosity.It exhibited two times higher water fluxes than the pure PES porous membrane.For microalgae harvesting,AL-FS mode(active layer facing the feed solution)was more favourable than AL-DS mode(active layer facing the draw solution)because less deposited microalgae on the active layer mitigate the membrane biofouling.FO operation combined with SPES/PES porous membranes is conducive to preserving microalgae cell integrity under the mild condition.In addition,FO membrane can be cleaned by a simple water rinse.Potential implications were highlighted as a sustainable method for microalgae harvesting because of no pressure input and less chemical cleaning demand.
基金supported by the National Natural Science Foundation of China (21978253)the Fundamental Research Funds for the Central Universities (226-2022-00020, 226-2022-00055)。
文摘Compared to inorganic supports, polymeric supports can offer additional benefits, e.g., easier processing and cheaper. However, the organic surface has weak adhesion to the zeolitic imidazolate frameworks(ZIFs) membrane layer, which usually requires complex surface modification or seeding. Herein, we demonstrate that a dual-layer asymmetric polymer support prepared by a simple spinning process is a good candidate for the preparation of ZIF-8 membrane. The inner layer of the support is an organic hollow fiber(PES) with finger-like pores, and the outer layer is a ZnO-PES composite layer with finger-like pores also. The ZnO-PES composite layer is expected to contain uniform ZnO crystals in the polymer matrix, i.e., the ZnO particles in the skin layer of the support are not easy to fall off. Under the induction of ZnO particles in the outer layers, continuous ZIF-8 membranes can be prepared by single in-situ crystallization, showing good adhesion to the supports. The obtained ZIF-8 membranes show a H_(2) permeance of 8.7 × 10^(-8)mol·m^(-2)·s^(-1)·Pa^(-1) with a H_(2)/N_(2) ideal separation selectivity of 18.0. The design and preparation of this dual-layer polymer support is expected to promote the large-scale application of MOF membranes on polymer supports.
