The synergism of ethylene-propylene-diene monomer copolymer （EPDM） and dicumyl peroxide （DCP, a crosslinking agent） in low density polyethylene （LDPE）/poly（vinyl chloride） （PVC） blends was investigated. When...The synergism of ethylene-propylene-diene monomer copolymer （EPDM） and dicumyl peroxide （DCP, a crosslinking agent） in low density polyethylene （LDPE）/poly（vinyl chloride） （PVC） blends was investigated. When EDPM and DCP are added to the blends simultaneously, the tensile properties could be improved significantly, especially for the blends with LDPE matrix. For example, incorporation of 10/1 （mass ratio） EPDM/DCP improves the tensile strength of the LDPE/PVC （mass ratio 80/20） blend from 7.9 MPa to 8.5 MPa and the elongation at break from 25% to 503%. Results from selective extraction, phase-contrast microscopy and thermal analysis reveal that the improvement in the tensile properties of the blends with LDPE matrix is principally due to the formation of a fine crosslinking network of the LDPE and EPDM phase. The outstanding modification effect of EPDM is explained by its dual functions： molecular entanglement with LDPE and the enhanced efficiency of DCP in the blends.展开更多
Swelling capacity of vinyl chloride (VC) in chlorinated polyethylene (CPE) with 25—40 wt% Cl at temperature 30—57℃ was studied and their relationships were correlated with Langmuir and Freundlich adsorption equatio...Swelling capacity of vinyl chloride (VC) in chlorinated polyethylene (CPE) with 25—40 wt% Cl at temperature 30—57℃ was studied and their relationships were correlated with Langmuir and Freundlich adsorption equations. A ternary phase diagram for VC-CPE-PVC was also established. In-situ polymerization conditions of CPE-g-VC were proposed and CPE content control was analyzed for the manufacturing process of CPE-g-VC graft product based on results of phase equilibrium study.展开更多
A polyaluminium chloride solution with high Al 13 content self-prepared was used as material for preparing the spherical γ-Al 2 O 3 by the sol-gel and oil-drop method. Polyethylene glycol with different molecular mas...A polyaluminium chloride solution with high Al 13 content self-prepared was used as material for preparing the spherical γ-Al 2 O 3 by the sol-gel and oil-drop method. Polyethylene glycol with different molecular mass was used as surfactant to investigate the effect on property of γ-Al 2 O 3 . The physical property was characterized by 27 Al NMR (nuclear magnetic resonance) spectra, X-ray diffraction, FT-IR (Fourier transform infrared spectroscopy) and TG-DTA (thermogravimetric-differential thermal analysis). The results showed that surface area, pore volume and pore size of γ-Al 2 O 3 all increased with the increase of polyethylene glycol molecular mass in the experimental research range, and polyethylene glycol 10000 was the most suitable pore forming additive. γ-Al 2 O 3 with surface area of 339 m 2 ·g 1 , pore volume of 0.59 cm 3 ·g 1 and pore diameter of 6.9 nm were obtained at 450 °C.展开更多
文摘The synergism of ethylene-propylene-diene monomer copolymer （EPDM） and dicumyl peroxide （DCP, a crosslinking agent） in low density polyethylene （LDPE）/poly（vinyl chloride） （PVC） blends was investigated. When EDPM and DCP are added to the blends simultaneously, the tensile properties could be improved significantly, especially for the blends with LDPE matrix. For example, incorporation of 10/1 （mass ratio） EPDM/DCP improves the tensile strength of the LDPE/PVC （mass ratio 80/20） blend from 7.9 MPa to 8.5 MPa and the elongation at break from 25% to 503%. Results from selective extraction, phase-contrast microscopy and thermal analysis reveal that the improvement in the tensile properties of the blends with LDPE matrix is principally due to the formation of a fine crosslinking network of the LDPE and EPDM phase. The outstanding modification effect of EPDM is explained by its dual functions： molecular entanglement with LDPE and the enhanced efficiency of DCP in the blends.
基金This project is supported by National Natural Science Foundation of China
文摘Swelling capacity of vinyl chloride (VC) in chlorinated polyethylene (CPE) with 25—40 wt% Cl at temperature 30—57℃ was studied and their relationships were correlated with Langmuir and Freundlich adsorption equations. A ternary phase diagram for VC-CPE-PVC was also established. In-situ polymerization conditions of CPE-g-VC were proposed and CPE content control was analyzed for the manufacturing process of CPE-g-VC graft product based on results of phase equilibrium study.
基金Supported by the National Natural Science Foundation of China (21076219)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry (ITLXHG2009071702)
文摘A polyaluminium chloride solution with high Al 13 content self-prepared was used as material for preparing the spherical γ-Al 2 O 3 by the sol-gel and oil-drop method. Polyethylene glycol with different molecular mass was used as surfactant to investigate the effect on property of γ-Al 2 O 3 . The physical property was characterized by 27 Al NMR (nuclear magnetic resonance) spectra, X-ray diffraction, FT-IR (Fourier transform infrared spectroscopy) and TG-DTA (thermogravimetric-differential thermal analysis). The results showed that surface area, pore volume and pore size of γ-Al 2 O 3 all increased with the increase of polyethylene glycol molecular mass in the experimental research range, and polyethylene glycol 10000 was the most suitable pore forming additive. γ-Al 2 O 3 with surface area of 339 m 2 ·g 1 , pore volume of 0.59 cm 3 ·g 1 and pore diameter of 6.9 nm were obtained at 450 °C.
