In this work, a series of polyethyleneimine （PEI） functionalized commercial silica gel were prepared by wet impregnation method and used as CO2 sorbent. The as-prepared sorbents were characterized by N2 adsorption, ...In this work, a series of polyethyleneimine （PEI） functionalized commercial silica gel were prepared by wet impregnation method and used as CO2 sorbent. The as-prepared sorbents were characterized by N2 adsorption, FT-1R and SEM techniques. CO2 capture was tested in a fixed bed reactor using a simulated flue gas containing 15.1% CO2 in a temperature range of 25-100 ~C. The effects of sorption temperature and amine content on CO2 uptake of the adsorbents were investigated. The silica gel with a 30 wt% PEI loading manifested the largest CO2 uptake of 93.4 mgcoz/gadsorbent （equal to 311.3 mg^oz/gPEI） among the tested sorbents under the conditions of 15.1% （v/v） CO2 in N2 at 75 ~C and atmospheric pressure. Moreover, it was rather low-cost. In addition, the PEI-impregnated silica gel exhibited stable adsorption-desorption behavior during 5 consecutive test cycles. These results suggest that the PEI-impregnated silica gel is a promising and cost-effective sorbent for CO2 capture from flue gas and other stationary sources with low CO2 concentration.展开更多
A novel method to prepare crosslinked polyethyleneimine （CPEI） hollow nanospheres was reported. Uniform silica nanospheres were used as templates, 3-aminopropyl trimethoxysilane （APS） was immobilized on the surfac...A novel method to prepare crosslinked polyethyleneimine （CPEI） hollow nanospheres was reported. Uniform silica nanospheres were used as templates, 3-aminopropyl trimethoxysilane （APS） was immobilized on the surface of silica nanospheres as couple agent. Aziridine was initiated ring-opening polymerization with the amino groups in APS to form polyethyleneimine （PEI） shell layer. 1,4-Butanediol diacrylate was utilized to crosslink PEI polymeric shell. The silica nanospheres in core were etched by hydrofluoric acid to obtain hollow CPEI nanospheres. The hollow nanospheres were characterized by X-ray photoelectron spectroscopy （XPS）, transmission electron microscopy （TEM）, and thermogravimetric analysis （TGA）.展开更多
Polyethyleneimine(PEI)modified palygorskite(Pal)was used for the adsorption of Cr(VI)in aqueous solution.The absorbent was characterized by Fourier transform infrared spectroscopy(FT-IR)and thermogravimetric analysis(...Polyethyleneimine(PEI)modified palygorskite(Pal)was used for the adsorption of Cr(VI)in aqueous solution.The absorbent was characterized by Fourier transform infrared spectroscopy(FT-IR)and thermogravimetric analysis(TGA).Characterized results confirmed that the Pal has been successfully modified by PEI.The modification of PEI increased the Cr(VI)adsorption performance of the Pal by the adsorption combined reduction mechanism,and amino groups of the adsorbent play the main role in the enhanced Cr(VI)adsorption.The maximum adsorption capacity was 51.10 mg·g^-1 at pH4.0 and 25°C.The adsorption kinetics of Cr(VI)on the adsorbent conforms to the Langmuir isotherm model.The maximum adsorption occurs at pH3,and then the adsorption capacity of PEI-Pal was decreased with the increase of p H values.The adsorption kinetics of Cr(VI)on PEI-Pal was modeled with pseudo-second-order model.The addition of Cl^-,SO4^2-and PO4^3-reduced the Cr(VI)adsorption by competition with Cr(VI)for the active sites of PEI-Pal.The Cr(VI)saturated PEI-Pal can be regenerated in alkaline solution,and the adsorption capacity can still be maintained at 30.44 mg·g^-1 after 4 cycles.The results demonstrate that PEI-Pal can be used as a potential adsorbent of Cr(VI)in aqueous solutions.展开更多
A novel biodegradable and biocompatible multilayer hollow microcapsules, modified by folate-conjugated polyethyleneimine （PEI）, as targeted and sustained release carriers of doxorubicin （DOX）, were successfully sy...A novel biodegradable and biocompatible multilayer hollow microcapsules, modified by folate-conjugated polyethyleneimine （PEI）, as targeted and sustained release carriers of doxorubicin （DOX）, were successfully synthesized using the sequential layer-by-layer electrostatic assembly technique from the sacrificial microtemplates （CaCOs/CMC, spherical, 1.7 pro） with chitosan （CS） and sodium earboxymethyl cellulose （ CMC ） as the polycation and polyanion polyelectrolyte. Scanning electron microscope （SEM） observation showed that the diameter of the seven assembly multilayer microparticles was about 2.0 pm with relatively regular sphere. After the microparticle cores was removed by complexation with ethylene diamine tctraacetic acid （EDTA） for calcium ions, the range of 200- 300 nm wall thickness of microcapsules was built, and it made the forming microeapsules to be stable. Thermogravimctric analysis confirms the deposition and modification total amount of polymer on the microtemplates is about 33.5 %. The assembly microparticles were modified by introducing PEI, and the grafting rate of folate could reach 20. 0 %. It was 4 times that of traditional method. The high grafting rate helped to improve targeting action of microcapsules. The deposition of DOX was prominent and the encapsulation efficiency was 96.9 %, and the plateaued release of loaded drug reached 78 % in pH 7.4 buffer solution, and then in pH 5.7 showed significantly a slow release.展开更多
A branched polyethyleneimine (BPEI) was applied to poly(ethylene terephthalate)(PET) fabric to improve its surface moisture absorption so that the fabric becomes lessliable to retention of electrostatic charg. The dur...A branched polyethyleneimine (BPEI) was applied to poly(ethylene terephthalate)(PET) fabric to improve its surface moisture absorption so that the fabric becomes lessliable to retention of electrostatic charg. The durability of this treatment was assessed bywashing and followed by measurement of charge development on the fabric. The treatedsamples showed improved surface wetting compared to the untreated. The results areconsistent with attachment of the BPEI to the PET surface by a cross-linking mechanism.展开更多
Abstracts . In this paper, a silicas-supportedpolyethyleneimine resin is synthesized and its adsorption proper-ties are studied. Its selectivity of sorbing heavy metal ion will vary considerably as the pH v...Abstracts . In this paper, a silicas-supportedpolyethyleneimine resin is synthesized and its adsorption proper-ties are studied. Its selectivity of sorbing heavy metal ion will vary considerably as the pH value of solution varies. In hy-drochloric acid,the resin only sorbs Au(Ⅱ). This suggests that the resin is applicable to the separation of copper (Ⅱ) or gold (Ⅲ).展开更多
In order to improve the selectivity of anion exchange resin, the surface of gel type anion exchange resin was modified with polyethyleneimine (PEI). In the proposed work an attempt to the utilization of commercial ani...In order to improve the selectivity of anion exchange resin, the surface of gel type anion exchange resin was modified with polyethyleneimine (PEI). In the proposed work an attempt to the utilization of commercial anion exchange resin modified by adsorption of polyethyleneimine was investigated. Many conditions of modification of anion exchange resin surface were studied. The influent parameters on the DOWEX 1X8 resin modification were determined using a factorial experimental design. The ion exchange reactions were studied for modified and unmodified resin and electrolyte solutions containing Cl-,NO3-,SO42-. All experiments were performed at constant ionic strength I = 0.3 mol·L-1 and constant temperature T = 298 K. Ionic exchange isotherms were established for the binary systems:Cl-/NO3-,Cl-/SO42- and NO3-/SO42-. The obtained results show that nitrate ion was more sorbed than chloride and sulfate. The order of preference for the anions studied in this investigation is:NO3->Cl->SO42-. All the results given by this resin were compared with those obtained with the AMX anion exchange membrane. Selectivity coefficients and thermodynamic constants for the three binary systems and for the two resins were determined. The modified resin became more selective towards monovalent anions.展开更多
A novel composite carrier of folic acid(FA)-polyethyleneimine(PEI)-ethosome(Eth)(FA-PEI-Eth)was developed for the treatment of cancers through loading and targeting delivery of multidrug(including gene and other drugs...A novel composite carrier of folic acid(FA)-polyethyleneimine(PEI)-ethosome(Eth)(FA-PEI-Eth)was developed for the treatment of cancers through loading and targeting delivery of multidrug(including gene and other drugs)into cancer cells.Physical and chemical property tests were done to prove the grafting of the composite.Gel retardation test was done to determine the optimal ratio of DNA@PEI complex,and cytocompatibility tests and tumor cell uptake tests were done to evaluate the efficiency of the composite.The results demonstrated that the FA-PEI-Eth could effectively deliver a gene and other drugs into tumor cells simultaneously,and suggested that this composite would be a promising carrier in tumor-targeted therapy applications.展开更多
A CO2 solid sorbent based on polyethyleneimine 10k (PEI-10k) impregnated into mesoporous silica (MPS) foam was synthesized and utilized to capture CO2 at temperatures ranged from 65°C to 95°C. The calculated...A CO2 solid sorbent based on polyethyleneimine 10k (PEI-10k) impregnated into mesoporous silica (MPS) foam was synthesized and utilized to capture CO2 at temperatures ranged from 65°C to 95°C. The calculated nitrogen and carbon contents in the bulk of the PEI-10k/MPS sorbent were similar to the XPS results measured on the surface of the foam, suggesting that the PEI was homo-geneously distributed throughout the MPS support. After CO2 adsorptionthe N 1s peak was broadened and could be resolved into two components: a high binding energy component (~401 eV) and a lower binding energy one (396 eV), respectively. The former nitrogen states are consistent with a protonated amine, presumably, due to carbamate formation. The lower binding energy component (~396 eV) could possibly be due to strongly chemisorbed CO2. The maximum sorption capacity was about 4 mmole CO2/g sorbent at 85°C and 1 bar. This capacity was doubled by raising the CO2 pressure to 24.95 bars. The adsorption results can be described by a Langmuir adsorption isotherm.展开更多
We report on the ability to create complex 3D flower-like SiO2 in vitro via CaCO3 micropar- icles supported by polyethyleneimine mediated biosilicification under experimentally altered chemical influences. The morphol...We report on the ability to create complex 3D flower-like SiO2 in vitro via CaCO3 micropar- icles supported by polyethyleneimine mediated biosilicification under experimentally altered chemical influences. The morphology, structure, composition of the product have been inves- tigated with the X-ray photoelectron spectrum, scanning electron microscope, transmission electron microscope, and energy-dispersive spectroscopy. Tile overall morphologies could be controlled to shift from a characteristic network of flower-like silica sphere to a sheet-like structure by adjusting physical adsorption of different amount of polyethyleneimine onto the surface of the CaCO3 microparticles.展开更多
In study on the growth reaction mechanism of Eu-doped ZnO nanowire（NW）, the intermedium of reaction is characterized by measures such as FTIR. Besides, the influences of polyethyleneimine（PEI） on morphology, struc...In study on the growth reaction mechanism of Eu-doped ZnO nanowire（NW）, the intermedium of reaction is characterized by measures such as FTIR. Besides, the influences of polyethyleneimine（PEI） on morphology, structure and photoelectric property of NW are observed by SEM, TEM, XRD, UV-vis and PL spectrum. According to the result, it manifests that Eu-doped ZnO NW array growth response experiences six mutually associated reaction processes in PEI-HMTA system：（a） chelation reaction of PEI and Zn^2＋ ＆ Eu^3＋;（b） protonation reaction of PEI and NH_3;（c） decomposition reaction of hexamethylenetetramine（HMTA）;（d） Mannich reaction of HCHO and PEI;（e） formation of precursor of Eu-doped ZnO;（f） dehydration condensation of Eu-doped ZnO precursors, further forming a doped ZnO NW array. Among them, PEI is the key factor of the whole doping growth reaction process. It both plays a role in modifying the growth of ZnO NW and makes it become longer and thinner. In the meantime, it also facilitates doping of Eu and enables ZnO NW to capture more photoelectrons and higher transmission rate, which is critical to improve photovoltaic performance of optoelectronic devices.展开更多
Polyethyleneimine-polyethylene glycol （PEI-PEG）, a novel nanocarrier, has been used for trans- fection and gene therapy in a variety of cells. In our previous study, we successfully carried out PEI-PEG-mediated gene...Polyethyleneimine-polyethylene glycol （PEI-PEG）, a novel nanocarrier, has been used for trans- fection and gene therapy in a variety of cells. In our previous study, we successfully carried out PEI-PEG-mediated gene transfer in spiral ganglion cells. It remains unclear whether PEI-PEG could be used for gene therapy with X-linked inhibitor of apoptosis protein （XIAP） in the inner ear. In the present study, we performed PEI-PEG-mediated XIAP gene transfection in the cochlea of Sprague-Dawley rats, via scala tympani fenestration, before daily cisplatin injections. Audito- ry brainstem reflex tests demonstrated the protective effects of XIAP gene therapy on auditory function. Immunohistochemical staining revealed XIAP protein expression in the cytoplasm of cells in the spiral ganglion, the organ of Corti and the stria vascularis. Reverse transcription-PCR detected high levels of XIAP mRNA expression in the cochlea. The present findings suggest that PEI-PEG nanocarrier-mediated XIAP gene transfection results in XIAP expression in the cochlea, prevents damage to cochlear spiral ganglion cells, and protects hearing.展开更多
文摘In this work, a series of polyethyleneimine （PEI） functionalized commercial silica gel were prepared by wet impregnation method and used as CO2 sorbent. The as-prepared sorbents were characterized by N2 adsorption, FT-1R and SEM techniques. CO2 capture was tested in a fixed bed reactor using a simulated flue gas containing 15.1% CO2 in a temperature range of 25-100 ~C. The effects of sorption temperature and amine content on CO2 uptake of the adsorbents were investigated. The silica gel with a 30 wt% PEI loading manifested the largest CO2 uptake of 93.4 mgcoz/gadsorbent （equal to 311.3 mg^oz/gPEI） among the tested sorbents under the conditions of 15.1% （v/v） CO2 in N2 at 75 ~C and atmospheric pressure. Moreover, it was rather low-cost. In addition, the PEI-impregnated silica gel exhibited stable adsorption-desorption behavior during 5 consecutive test cycles. These results suggest that the PEI-impregnated silica gel is a promising and cost-effective sorbent for CO2 capture from flue gas and other stationary sources with low CO2 concentration.
基金This work was financially supported by the National Basic Research Program of China(National 973 program,No.2005 CB623903).
文摘A novel method to prepare crosslinked polyethyleneimine （CPEI） hollow nanospheres was reported. Uniform silica nanospheres were used as templates, 3-aminopropyl trimethoxysilane （APS） was immobilized on the surface of silica nanospheres as couple agent. Aziridine was initiated ring-opening polymerization with the amino groups in APS to form polyethyleneimine （PEI） shell layer. 1,4-Butanediol diacrylate was utilized to crosslink PEI polymeric shell. The silica nanospheres in core were etched by hydrofluoric acid to obtain hollow CPEI nanospheres. The hollow nanospheres were characterized by X-ray photoelectron spectroscopy （XPS）, transmission electron microscopy （TEM）, and thermogravimetric analysis （TGA）.
基金funded by the National Natural Science Foundation of China(21677092)the Scientific Research Program funded by Shaanxi Provincial Education Department(15JK1095)。
文摘Polyethyleneimine(PEI)modified palygorskite(Pal)was used for the adsorption of Cr(VI)in aqueous solution.The absorbent was characterized by Fourier transform infrared spectroscopy(FT-IR)and thermogravimetric analysis(TGA).Characterized results confirmed that the Pal has been successfully modified by PEI.The modification of PEI increased the Cr(VI)adsorption performance of the Pal by the adsorption combined reduction mechanism,and amino groups of the adsorbent play the main role in the enhanced Cr(VI)adsorption.The maximum adsorption capacity was 51.10 mg·g^-1 at pH4.0 and 25°C.The adsorption kinetics of Cr(VI)on the adsorbent conforms to the Langmuir isotherm model.The maximum adsorption occurs at pH3,and then the adsorption capacity of PEI-Pal was decreased with the increase of p H values.The adsorption kinetics of Cr(VI)on PEI-Pal was modeled with pseudo-second-order model.The addition of Cl^-,SO4^2-and PO4^3-reduced the Cr(VI)adsorption by competition with Cr(VI)for the active sites of PEI-Pal.The Cr(VI)saturated PEI-Pal can be regenerated in alkaline solution,and the adsorption capacity can still be maintained at 30.44 mg·g^-1 after 4 cycles.The results demonstrate that PEI-Pal can be used as a potential adsorbent of Cr(VI)in aqueous solutions.
基金National Natural Science Foundation of China(No.21472126)
文摘A novel biodegradable and biocompatible multilayer hollow microcapsules, modified by folate-conjugated polyethyleneimine （PEI）, as targeted and sustained release carriers of doxorubicin （DOX）, were successfully synthesized using the sequential layer-by-layer electrostatic assembly technique from the sacrificial microtemplates （CaCOs/CMC, spherical, 1.7 pro） with chitosan （CS） and sodium earboxymethyl cellulose （ CMC ） as the polycation and polyanion polyelectrolyte. Scanning electron microscope （SEM） observation showed that the diameter of the seven assembly multilayer microparticles was about 2.0 pm with relatively regular sphere. After the microparticle cores was removed by complexation with ethylene diamine tctraacetic acid （EDTA） for calcium ions, the range of 200- 300 nm wall thickness of microcapsules was built, and it made the forming microeapsules to be stable. Thermogravimctric analysis confirms the deposition and modification total amount of polymer on the microtemplates is about 33.5 %. The assembly microparticles were modified by introducing PEI, and the grafting rate of folate could reach 20. 0 %. It was 4 times that of traditional method. The high grafting rate helped to improve targeting action of microcapsules. The deposition of DOX was prominent and the encapsulation efficiency was 96.9 %, and the plateaued release of loaded drug reached 78 % in pH 7.4 buffer solution, and then in pH 5.7 showed significantly a slow release.
文摘A branched polyethyleneimine (BPEI) was applied to poly(ethylene terephthalate)(PET) fabric to improve its surface moisture absorption so that the fabric becomes lessliable to retention of electrostatic charg. The durability of this treatment was assessed bywashing and followed by measurement of charge development on the fabric. The treatedsamples showed improved surface wetting compared to the untreated. The results areconsistent with attachment of the BPEI to the PET surface by a cross-linking mechanism.
文摘Abstracts . In this paper, a silicas-supportedpolyethyleneimine resin is synthesized and its adsorption proper-ties are studied. Its selectivity of sorbing heavy metal ion will vary considerably as the pH value of solution varies. In hy-drochloric acid,the resin only sorbs Au(Ⅱ). This suggests that the resin is applicable to the separation of copper (Ⅱ) or gold (Ⅲ).
文摘In order to improve the selectivity of anion exchange resin, the surface of gel type anion exchange resin was modified with polyethyleneimine (PEI). In the proposed work an attempt to the utilization of commercial anion exchange resin modified by adsorption of polyethyleneimine was investigated. Many conditions of modification of anion exchange resin surface were studied. The influent parameters on the DOWEX 1X8 resin modification were determined using a factorial experimental design. The ion exchange reactions were studied for modified and unmodified resin and electrolyte solutions containing Cl-,NO3-,SO42-. All experiments were performed at constant ionic strength I = 0.3 mol·L-1 and constant temperature T = 298 K. Ionic exchange isotherms were established for the binary systems:Cl-/NO3-,Cl-/SO42- and NO3-/SO42-. The obtained results show that nitrate ion was more sorbed than chloride and sulfate. The order of preference for the anions studied in this investigation is:NO3->Cl->SO42-. All the results given by this resin were compared with those obtained with the AMX anion exchange membrane. Selectivity coefficients and thermodynamic constants for the three binary systems and for the two resins were determined. The modified resin became more selective towards monovalent anions.
基金Shanghai Science and Technology Committee Project,China(No.18490740400)Open Foundation of Key Laboratory of Science&Technology of Eco-Textile,China(No.Eco-KF-201612)+1 种基金Opening Project of Zhejiang Provincial Preponderant and Characteristic Subject of Key University,Zhejiang Chinese Medical University,China(No.ZYAOX2018035)Project of Health and Family Planning Commission of Zhejiang Province,China(No.2018KY831)
文摘A novel composite carrier of folic acid(FA)-polyethyleneimine(PEI)-ethosome(Eth)(FA-PEI-Eth)was developed for the treatment of cancers through loading and targeting delivery of multidrug(including gene and other drugs)into cancer cells.Physical and chemical property tests were done to prove the grafting of the composite.Gel retardation test was done to determine the optimal ratio of DNA@PEI complex,and cytocompatibility tests and tumor cell uptake tests were done to evaluate the efficiency of the composite.The results demonstrated that the FA-PEI-Eth could effectively deliver a gene and other drugs into tumor cells simultaneously,and suggested that this composite would be a promising carrier in tumor-targeted therapy applications.
文摘A CO2 solid sorbent based on polyethyleneimine 10k (PEI-10k) impregnated into mesoporous silica (MPS) foam was synthesized and utilized to capture CO2 at temperatures ranged from 65°C to 95°C. The calculated nitrogen and carbon contents in the bulk of the PEI-10k/MPS sorbent were similar to the XPS results measured on the surface of the foam, suggesting that the PEI was homo-geneously distributed throughout the MPS support. After CO2 adsorptionthe N 1s peak was broadened and could be resolved into two components: a high binding energy component (~401 eV) and a lower binding energy one (396 eV), respectively. The former nitrogen states are consistent with a protonated amine, presumably, due to carbamate formation. The lower binding energy component (~396 eV) could possibly be due to strongly chemisorbed CO2. The maximum sorption capacity was about 4 mmole CO2/g sorbent at 85°C and 1 bar. This capacity was doubled by raising the CO2 pressure to 24.95 bars. The adsorption results can be described by a Langmuir adsorption isotherm.
文摘We report on the ability to create complex 3D flower-like SiO2 in vitro via CaCO3 micropar- icles supported by polyethyleneimine mediated biosilicification under experimentally altered chemical influences. The morphology, structure, composition of the product have been inves- tigated with the X-ray photoelectron spectrum, scanning electron microscope, transmission electron microscope, and energy-dispersive spectroscopy. Tile overall morphologies could be controlled to shift from a characteristic network of flower-like silica sphere to a sheet-like structure by adjusting physical adsorption of different amount of polyethyleneimine onto the surface of the CaCO3 microparticles.
基金Financially supported by the National Natural Science Foundation of China(Nos:51463023 and 21461028)Guangxi Key Laboratory of Farm Products Processing(Cultivation Base)Guangxi Colleges and Universities Program of Innovative Research Team and Outstanding Talent
文摘In study on the growth reaction mechanism of Eu-doped ZnO nanowire（NW）, the intermedium of reaction is characterized by measures such as FTIR. Besides, the influences of polyethyleneimine（PEI） on morphology, structure and photoelectric property of NW are observed by SEM, TEM, XRD, UV-vis and PL spectrum. According to the result, it manifests that Eu-doped ZnO NW array growth response experiences six mutually associated reaction processes in PEI-HMTA system：（a） chelation reaction of PEI and Zn^2＋ ＆ Eu^3＋;（b） protonation reaction of PEI and NH_3;（c） decomposition reaction of hexamethylenetetramine（HMTA）;（d） Mannich reaction of HCHO and PEI;（e） formation of precursor of Eu-doped ZnO;（f） dehydration condensation of Eu-doped ZnO precursors, further forming a doped ZnO NW array. Among them, PEI is the key factor of the whole doping growth reaction process. It both plays a role in modifying the growth of ZnO NW and makes it become longer and thinner. In the meantime, it also facilitates doping of Eu and enables ZnO NW to capture more photoelectrons and higher transmission rate, which is critical to improve photovoltaic performance of optoelectronic devices.
基金supported by the Natural Science Foundation of Guangdong Province in China,No.S2011040003553
文摘Polyethyleneimine-polyethylene glycol （PEI-PEG）, a novel nanocarrier, has been used for trans- fection and gene therapy in a variety of cells. In our previous study, we successfully carried out PEI-PEG-mediated gene transfer in spiral ganglion cells. It remains unclear whether PEI-PEG could be used for gene therapy with X-linked inhibitor of apoptosis protein （XIAP） in the inner ear. In the present study, we performed PEI-PEG-mediated XIAP gene transfection in the cochlea of Sprague-Dawley rats, via scala tympani fenestration, before daily cisplatin injections. Audito- ry brainstem reflex tests demonstrated the protective effects of XIAP gene therapy on auditory function. Immunohistochemical staining revealed XIAP protein expression in the cytoplasm of cells in the spiral ganglion, the organ of Corti and the stria vascularis. Reverse transcription-PCR detected high levels of XIAP mRNA expression in the cochlea. The present findings suggest that PEI-PEG nanocarrier-mediated XIAP gene transfection results in XIAP expression in the cochlea, prevents damage to cochlear spiral ganglion cells, and protects hearing.
